Search NASA⌕ Search

SEARCH · Search NASA

Results for “test statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Is land use producing robust signals in future projections from Earth system models, all else being equal?

Abstract We use six Earth system models (ESMs) run under SSP3-7.0, a scenario characterized by a relatively large land use change (LUC) over the 21st century, and under a variant of the same scenario where a significantly different pattern of LUC, taken from SSP1-2.6, was used, all else being equal. Our goal is to identify changes in climate extremes between the two scenarios that are statistically significant and robust across the ESMs. The motivation for this study is to test a long-held assumption of the shared socio-economic pathway-representative concentration pathway (SSP-RCP) scenario framework: that the signal from LUC can be safely disregarded when pairing different SSPs to the compatible RCPs, where compatibility only considers global radiative forcing, predominantly determined by well-mixed greenhouse gasses emissions. We analyze extremes of daily minimum and maximum temperatures and precipitation, after fitting non-stationary generalized extreme value distributions in a way that borrows strength along the length of the simulation (2015–2100) and across initial condition ensembles. We consider changes in the 20 year return levels (RL20s) of these metrics by 2100, and focus on eight locations where LUC is large within each scenario, and strongly differs between scenarios, averaging the RL20s over a neighborhood characterized by the same LUC to enhance the signal to noise. We find that precipitation extremes do not show significant differences attributable to LUC differences. For temperature extremes (cold and hot) results are mixed, with some location-index combination showing significant results for some of the ESMs but not all, and not many coherent changes appearing for indices across regions, or regions across indices. These ESMs are representative of what is typically adopted as the source of climate information for impact studies, when the SSP-RCP framework is put to use. Overall, our analysis suggests that the hypothesis to pair SSPs to RCPs in a flexible fashion is overall defensible. However, the appearance of some coherence in a few locations and for some indices invites further investigation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Dark Energy Survey Year 6 results: Galaxy-galaxy lensing

Here, we present galaxy-galaxy lensing measurements from the full six years of data from the Dark Energy Survey (DES Y6), covering 4031 deg 2 and used in the DES Y6 3×2 pt cosmological analysis. We use the Maglim++ lens sample, containing ∼9 million galaxies divided into six redshift bins, and the Metadetection source catalog, including ∼140 million galaxies divided into four redshift bins. The mean tangential shear signal achieves a total signal-to-noise ratio (S/N) of 173, corresponding to a 17% improvement over DES Y3. After applying the scale cuts used in the cosmological analysis, with 𝑅 min =6 Mpc/ℎ (4 Mpc/ℎ) for the linear (nonlinear) galaxy-bias model, the S/N is reduced to 75 (90). A comprehensive suite of validation tests demonstrates that the measurement is robust against observational and astrophysical systematics at the statistical precision required for the DES Y6 analysis. Although not used in the main cosmological analysis, we extract high signal-to-noise geometric shear-ratio measurements from the galaxy-galaxy lensing signal on small angular scales. These measurements provide an internal consistency check on the photometric redshift distributions and shear calibration used in the 3 ×2 pt analysis.

cosmological parameters↗
DOE OSTI2021

Excess deaths reveal unequal impact of COVID-19 in Ecuador

Latin America has struggled to control the transmission of COVID-19. Comparison of excess death (ED) rates during the pandemic reveals that Ecuador is among the highest impacted countries. In this analysis, we update our previous findings with the most complete all-cause mortality records available for 2020, disaggregated by sex, age, ethnicity and geography. Our study shows that in 2020, Ecuador had a 64% ED rate (95% CI 63% to 65%) or 64% more deaths than expected. Men had a higher ED rate, 75% (95% CI 73% to 76%), than women’s 51% (95% CI 49% to 52%), and this pattern of higher EDs for men than women held for most age groups. The only exception was the 20–29 age group, where women had 19% more deaths, compared to 10% more deaths for men, but that difference is not statistically significant. The analysis provides striking evidence of the lack of COVID-19 diagnostic testing in Ecuador: the confirmed COVID-19 deaths in 2020 accounted for only 21% of total EDs. Our significant finding is that indigenous populations, who typically account for about 5% of the deaths, show almost four times the ED rate of the majority mestizo group. Indigenous women in each age group have higher ED rates than the general population and, in ages between 20 and 49 years, they have higher ED rates than indigenous men. Indigenous women in the age group 20–29 years had an ED rate of 141%, which is commensurate to the ED rate of indigenous women older than 40 years.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Geospatial analysis of preterm and small-for-gestational age births in Washington D.C.

Background: This study is based on the recognition that adverse pregnancy outcomes significantly affect maternal and infant health, leading to increased morbidity and mortality. These outcomes are shaped by a complex interplay of individual-level factors—like maternal age and education—and community-level influences, including socio-economic status and access to healthcare. Understanding these determinants is crucial for developing effective public health strategies, especially for marginalized populations, by identifying high-risk areas and informing targeted interventions that address both individual and structural barriers. Methods: We utilized geospatial analysis to explore the association between individual- and community-level factors and adverse pregnancy outcomes, specifically preterm birth (PTB) and small-for-gestational-age (SGA) birthweight in Washington, D.C. We used Empirical Bayes smoothing methods to calculate rates of adverse birth outcomes from 2010 to 2018 at the U.S. Census tract–level. Spatial scan statistics were used to investigate if adverse birth outcomes clustered in specific areas. ANOVA tests were conducted for individual- and community-level factors within identified clusters. Results: Spatial analysis identified significant high-risk clusters for PTB and SGA infants primarily in southeastern Washington, D.C., particularly in Wards 7 and 8. Individuals residing within these clusters experienced a 47% increased risk of PTB (RR = 1.467) and a 56% increased risk of SGA (RR = 1.560) compared to those outside clusters. Space–time analysis revealed temporal variation, with PTB clusters persisting from 2011 to 2014 and SGA clusters extending through 2017. Compared to low-risk clusters, high-risk clusters had younger birthing individuals (mean age ~26.5 vs. ~33 years), lower maternal college degree attainment (~20% vs. ~80%), higher rates of late or no prenatal care (~16% vs. 11%), and increased prevalence of smoking and hypertension (all P < 0.001). Community-level indicators showed lower median household incomes ($\$40,000$ vs. ~$\$105,000$), greater poverty (~16% vs. ~7% below $\$10,000$/year), higher public assistance use (~32% vs. ~5%), and reduced healthcare access (greater distances to emergency and specialty care) in high-risk areas (all P < 0.001). Neighborhood deprivation indices were significantly elevated, commutes were longer, and population density was lower in these clusters. These findings highlight that adverse birth outcomes cluster in neighborhoods with pronounced socioeconomic and health disparities. Conclusion: High-risk birth clusters highlight intertwined factors: individual, socio-economic, and geographic. Addressing these requires comprehensive interventions focusing on social and structural determinants of health.

Birth outcomes↗
DOE OSTI2019

Analysis of Neural Network Combustion Surrogate Models

This report details initial investigations of neural network surrogate models for combustion applications. The models are assessed with respect to averaged predictive fidelity over a test data set as well as with respect to the accuracy of resolving landmark statistics of interest, as a function of increasing training data volume.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

A Multiphysics Multiscale Simulation Platform for Damage, Environmental Degradation, and Life Prediction of CMCs in Extreme Environments

This project successfully developed a multiphysics, multiscale computational framework to enhance the design and development of CMCs, with a focus on modeling highly nonlinear, time-dependent damage mechanisms and material degradation under extreme conditions, such as those experienced in turbine service environments. The project made significant advances in improving our understanding of progressive damage, oxidative degradation, and time-dependent inelastic deformation in CMCs, with particular attention to the role of uncertainties in predictions. Key outcomes include the integration of advanced material characterization, uncertainty quantification, and multiphysics constitutive models to predict the behavior of CMCs over their service life. A novel multiscale methodology was employed, which integrated microscale constituent behaviors with structural-scale responses, enabling the manufacturing defects in the microstructure that are prone to damage nucleation. Through the development of DL algorithms, the project advanced the prediction of damage initiation and crack propagation, taking into account the defect morphology and statistical variations across multiple scales. The framework was rigorously validated using thermomechanical experiments, which tested CMCs under various mechanical loadings at elevated temperatures, further enhancing the model's predictive capability. Overall, the research outcomes have provided a more accurate, reliable method for predicting CMC component life, significantly advancing material design, and improving component reliability in extreme environments. This work has strong implications for the optimization of turbine components and other high-performance applications where CMCs are used.

03 NATURAL GAS↗
DOE OSTI2025

STAT7 v2.0 User Guide

The STAT7 software was developed to perform steady-state, single-phase thermal hydraulics analysis of plate-fueled reactors based on statistical propagation of uncertainties. Application of the software includes non-power research and test reactor analysis, and it has been used for the conversion to low- enriched uranium fuel of U.S. High Performance Research Reactors such as the Massachusetts Institute of Technology Research Reactor. Since it can be necessary to repeat reactor safety analysis, such as during fuel reloading, STAT7 accommodates flexibility in analyzing many practical aspects of reactor fuel management. STAT7 uses a Monte Carlo approach to model uncertainty in common fuel fabrication parameters and other key reactor operating parameters required for reactor thermal hydraulics analysis. These safety calculations are ultimately intended to protect against high fuel plate temperatures due to critical heat flux, or onset of flow instability. STAT7 supports water properties based on the IAPWS-IF97 functions (The International Association for the Properties of Water and Steam Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam) in addition to fitted functions. STAT7 predicts axial profiles of fuel, cladding, and coolant temperature along a lateral stripe that runs the full length of the fuel plate from the bottom to the top. STAT7 can simultaneously analyze every axial node in each lateral stripe of all fuel plates and coolant channels in every fuel element of an entire reactor core. Power splits are calculated for each axial node of each plate to determine how much of the power goes out each face of the plate. In a single execution, STAT7 can be used to perform full core analysis by analyzing the margin to onset of nucleate boiling and onset of flow instability for each axial node of each stripe of each plate of each fuel element in the core.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Investigating the Influence of River Geomorphology on Human Presence Using Night Light Data: A Case Study in the Indus Basin

Human settlements have historically thrived near rivers due to enhanced navigation and trade, and the availability of water supply and resources. The use of night light data, representing economic activities, provides a novel approach to studying the interactions between human activity and rivers over time. Here, we use the Defense Meteorological Satellite Program (DMSP) stable night light data from 2000 to 2013 as a proxy for human presence and activities to quantify the statistical relationships between night light presence and intensity in the Indus Basin, Asia. We test how these data are affected by proximity to trunk channels and by channel type (single/multi-thread) in the study area. We find that night light presence is enhanced by 26% within a 0 to 5 km proximity range of the Indus River and its tributaries, relative to the basin as a whole. We interpret this to represent increased human presence and activity within this zone. However, the mean intensity is lower near the river and higher away from the river, signifying denser settlements, such as towns and cities, which are preferentially located away from the Indus and its tributaries. Moreover, the enhancement of lit pixels signifying human presence and activities is increased by 18% near single-thread sections of the Indus River, compared to segments of the Indus displaying multi-thread morphologies. We suggest that this is due to the enhanced stability of single-threaded channels, relative to mobile multi-threaded channel reaches. This study demonstrates how night lights are an important tool in studying the relationship between human presence and river dynamics in large catchments such as the Indus, and we suggest that these data will have an important role in assessing differential flood spatial and social vulnerability at a regional scale.

Environmental Sciences & Ecology↗
DOE OSTI2025

A Unified Model of Cosmic-Ray Propagation and Radio Extreme Scattering Events from Intermittent Interstellar Structures

Intermittent magnetic structures are a plausible candidate for explaining cosmic-ray (CR) diffusion rates derived from observed CR energy spectra. Independently, studies of extreme scattering events (ESEs) of radio quasars and pulsar scintillation have hinted that very straight, large aspect ratio magnetic current sheets may be responsible for the localized large scattering of radio waves. The required shortest axis of the typical structures producing ESEs is of the same scale (∼au) as the gyroradii of ∼GeV CRs. In this Letter, we propose that the same magnetic/density sheets can produce large scattering of both CRs and radio waves. We demonstrate that the geometry and volume-filling factor of the sheets derived from quasar ESEs can explain the observed mean free path of GeV CRs without introducing free parameters. The model places constraints on the sheet geometry, such as straightness and large aspect ratio, and assumes that the statistics of the sheets are similar throughout the Galactic volume. We therefore discuss observational tests of the sheet model, which includes observations of echoes in pulsars and fast radio bursts, gravitationally lensed quasars, the distribution of ESE durations, and spatial correlations between ESE events and rotation measure fluctuations. Such tests will be enabled by upcoming wide-field radio instruments, including the Canadian Hydrogen Observatory and Radio-transient Detector and Deep Synoptic Array 2000 Antennas.

Kempski, Philipp [Princeton Univ., NJ (United Stat↗
DOE OSTI2026

Dark Energy Survey Year 6 Results: Galaxy-galaxy lensing

We present galaxy--galaxy lensing (GGL) measurements from the full six years of data from the Dark Energy Survey (DES Y6), covering $4031\,\mathrm{deg}^2$ and used in the DES Y6 $3\times2$pt cosmological analysis. We use the MagLim++ lens sample, containing $\sim 9$ million galaxies divided into six redshift bins, and the Metadetection source catalog, including $\sim 140$ million galaxies divided into four redshift bins. The mean tangential shear signal achieves a total signal-to-noise ratio (S/N) of $173$, corresponding to a $17\%$ improvement over DES Y3. After applying the scale cuts used in the cosmological analysis, with $R_{\min}=6\,\mathrm{Mpc}/h$ ($4\,\mathrm{Mpc}/h$) for the linear (nonlinear) galaxy-bias model, the S/N is reduced to $75$ (90). A comprehensive suite of validation tests demonstrates that the measurement is robust against observational and astrophysical systematics at the statistical precision required for the DES Y6 analysis. Although not used in the main cosmological analysis, we extract high--signal-to-noise geometric shear-ratio measurements from the galaxy--galaxy lensing signal on small angular scales. These measurements provide an internal consistency check on the photometric redshift distributions and shear calibration used in the $3\times2$pt analysis.

Giannini, G. [Barcelona, IEEC; Chicago U., KICP; B↗
DOE OSTI2024

Application of the immobilized low-activity waste glass corrosion model to the static dissolution of 24 statistically-designed alkali-borosilicate waste glasses

Glass corrosion models that capture the complex mechanisms of the glass-water reaction enable the prediction of nuclear waste glass durability in disposal scenarios. Parameterization of such models is challenging because of the need to capture changes in corrosion behavior with time, reaction conditions, and glass composition. In this report we describe and employ the immobilized low activity waste (ILAW) glass corrosion model (IGCM) in geochemical simulations of static dissolution tests, at two temperatures (40 °C and 90 °C), for a matrix of 24 enhanced low activity waste (eLAW) glasses statistically designed to cover a processable composition space defined by 8 major glass components (Al 2 O 3 , B 2 O 3 , CaO, Na 2 O, SiO 2 , SnO 2 , ZrO 2 , and Others as defined in the text). The IGCM includes a first-order chemical affinity term and an ion-exchange term that represents the net exchange of Na+ ions in the pristine glass with protons in aqueous solution. Constant, time-dependent, and time- and pH-dependent functional forms of the ion-exchange term are evaluated to reproduce the change in corrosion behavior with time in saturated, static dissolution tests. The agreement with measured aqueous concentrations of the main glass components (B, Na, and Si) improved significantly upon addition of a time-dependent term, which therefore constitutes a simple representation of the glass-water reaction progress. Due to the limited changes in pH in the static dissolution tests, past a short initial period of rapid increase, addition of a pH dependent term did not appreciably improve the fits, indicating that comprehensive model parameterization requires more than one type of glass corrosion test to capture a wide range of solution chemistries. IGCM parameters were found to be dependent on glass composition, and the parameter sets generated in this work will enable the development of composition–parameter correlation models that offer the promise of predicting IGCM parameters, and thus glass corrosion behavior, solely based on glass composition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

AI Model Benchmarking for Nonproliferation Applications: Steel Thread Benchmarking Task Force Technical Report (Rev. 2)

Steel Thread is a NA-22 venture that seeks to build trustworthy, reliable AI models that can be used in a wide variety of nonproliferation tasks. A key aspect of building these models is developing appropriate benchmarks and evaluation methods, which will enable the venture to identify and adapt models to provide the most value in the nonproliferation domain. Benchmarks must be relevant to key tasks in this domain, such as question answering, information retrieval, document summarization and classification, consensus analysis, and image and data analysis. This report 1) provides an overview of benchmark design, evaluation, and challenges; 2) reviews a variety of open benchmarks, with a focus on language models and tasks; and 3) identifies benchmarks that are most relevant to Steel Thread. This report is intended to serve as a basis for further efforts to classify and evaluate benchmarks and their correlation with success on nonproliferation-specific tasks. The Steel Thread venture has defined benchmarks to be a particular combination of a dataset (or datasets) and a metric (or metrics) conceptualized as representing one or more specific tasks or sets of abilities for a specific modality. It is adopted by a research community as a shared framework for comparing methods.1 It includes 1) Data: Labeled (a designated subset not used for training, which could be all the data), 2) Metric: A way to quantify performance, 3) Task/Ability: What the benchmark is testing, 4) Protocol: A structured and repeatable evaluation process, 5) Baseline/Reference Model: For comparison; could be statistical, rule-based, SME-derived, or another model, and 6) Maintenance Plan: to update with new information over time; important for long-term utility. For further clarity, the definition includes what a benchmark, in this context, is not. It is not a corpus of training data, specific to a model (it is intended to apply to a range of models), a universal evaluation of performance, a guarantee that the ‘top’ model on the leaderboard will be the best fit for every specific use case, an all-encompassing proof of a model’s universal quality, nor is it a one-size-fits-all measure of success. It does not cover every real-world constraint (like operational, ethical, or cost considerations), a systems integration test, or a unit test. This definition was inspired by and resulted from discussions within the Steel Thread Benchmarking Task Force. This group was formed to define what we would mean as a benchmark within Steel Thread but persisted as the need to develop a thorough understanding of the large and expanding existing benchmarking space. This technical report is a result of the group’s divide and conquer approach to exploring this space. The release of benchmarks might not be progressing as quickly as model development, but it is moving very fast, as many benchmarks quickly become saturated, when state-of-the-art models score so close to the benchmark’s ceiling that their results are virtually indistinguishable. At that point, the test no longer differentiates between new systems, so researchers usually stop reporting scores as the benchmark no longer informs about improvements from the next generation of models. In the OpenAI announcement of GPT-5, they reported results on six flagship public benchmarks (AIME 2025, SWE-bench Verified, Aider Polyglot, MMMU, HealthBench Hard, GPQA) but the full system-card covers roughly thirty-five separate evaluations, comprising hundreds of test task items in total. There have been some efforts to summarize benchmarks in specific fields, like for text-to-image generation, but these surveys have had a narrow methodology scope. Therefore, a comprehensive survey of all benchmarks or even all benchmarks that could be relevant to Steel Thread is outside of the scope of this report. We chose some specific benchmarks to investigate in detail.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Field-scale dynamics of planting dates in the US Corn Belt from 2000 to 2020

Crop planting dates are a dynamic feature of agricultural systems that respond to short- and long-term climate signals, crop and cultivar selection, and technology changes. Planting date records are essential for yield gap analyses, accurate crop modeling, and tracking farmer adaptations to weather and climate change. Although planting dates have high variation at local scales due to heterogeneity in farm resources and decision-making, available long-term data on planting dates is largely restricted to aggregated regional statistics or, at best, satellite-derived datasets with limited spatiotemporal extent and at resolutions unable to distinguish individual fields (> 250 m). Here, we generated retrospective annual field-scale (30 m) planting date maps for both maize and soybeans spanning 2000-2020 across a 12 state region in the United States Corn Belt based on Landsat satellite data and a large ground sample of over 28,000 maize and soybean fields. Using training data from 2015-2020 for model selection, we found that planting date predictions improved with harmonic regression of Landsat data and additional annual weather covariates. The preferred random forests model approximately doubled performance compared to a null model based on state median planting dates, capturing 47% of field-level variation for maize (mean absolute error, MAE = 7.4 days) and 44% for soybeans (MAE = 7.5 days) against held-out ground truth test data for 2008-2014. We also evaluated the full 2000-2020 dataset with state agricultural statistics, finding strong agreement with median planting dates for maize (R 2 = 0.76, MAE = 4.4 days) and slightly lower agreement for soybeans (R 2 = 0.65, MAE = 5.4 days) when aggregated to the state level. We then used this new dataset to analyze environmental determinants of planting dates at a finer-scale than previously possible, controlling for unobserved variation at the sub-state district level. We found that during 2000-2020, each standard deviation increase in rainfall delayed planting by ~ 2.5 days, and fields with higher soil productivity ratings tended to be planted earlier. We did not find meaningful trends over the last two decades in planting dates for maize or soybeans, in contrast to trends towards earlier planting dates late last century and predicted for this period in climate adaptation studies. We hypothesize increases in early season rainfall may have inhibited these shifts towards earlier planting. Remotely sensed planting dates will be a useful tool for yield gap analyses, crop simulation modeling, and ongoing assessment of climate adaptation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Inter-well connectivity detection in CO 2 WAG projects using statistical recurrent unit models

Routine well-wise injection and production measurements contain significant information on subsurface structure and properties. Data-driven technology that interprets surface data into subsurface structure or properties can assist operators in making informed decisions by providing a better understanding of field assets. Our machine-learning framework is built on the statistical recurrent unit (SRU) model and interprets well-based injection/production data into inter-well connectivity without relying on a geologic model. We test it on synthetic and field-scale CO 2 EOR projects utilizing the water-alternating-gas (WAG) process. SRU is a special type of recurrent neural network (RNN) that allows for better characterization of temporal trends, by learning various statistics of the input at different time scales. In our application, the complete states (injection rate, pressure and cumulative injection) at injectors and pressure states at producers are fed to SRU as the input and the phase rates at producers are treated as the output. Once the SRU is trained and validated, it is then used to assess the connectivity of each injector to any producer using permutation variable importance method, wherein inputs corresponding to an injector are shuffled and the increase in prediction error at a given producer is recorded as the importance (connectivity metric) of the injector to the producer. This method is tested in both synthetic and field-scale cases. The validation of the proposed data-driven inter-well connectivity assessment is performed using synthetic data from simulation models where inter-well connectivity can be easily measured using the streamline-based flux allocation. The SRU model is shown to offer excellent prediction performance on the synthetic case. Despite significant measurement noise and frequent well shut-ins imposed in the field-scale case, the SRU model offers good prediction accuracy, the overall relative error of the phase production rates at most producers ranges from 10% to 30%. It is shown that the dominant connections identified by the data-driven method and streamline method are in close agreement. This significantly improves confidence in our data-driven procedure. The novelty of this work is that it is purely data-driven method and can directly interpret routine surface measurements to intuitive subsurface knowledge. Furthermore, the streamline-based validation procedure provides physics-based backing to the results obtained from data analytics. This study results in a reliable and efficient data analytics framework that is well-suited for large field applications.

42 ENGINEERING↗
DOE OSTI2024

Information and Statistics in Nuclear Experiment and Theory (ISNET)

As with all empirical sciences, nuclear physics operates in the virtuous cycle of the scientific method: observations inspire theoretical models; models lead to new predictions; predictions are tested in experiments; experiments lead to new observations; and so on. Evaluating what we are inferring, and how certain we are of it, is key to this process. These requirements, and a general interest in applying novel statistical, mathematical, and computational techniques, led to the formation of a dedicated research community entitled “Information and Statistics in Nuclear Experiment and Theory (ISNET)” (https://isnet-series.github.io/), which now includes more than 300 members. While the community’s interests lean toward nuclear theory, the unifying theme for this group is the inference of knowledge from data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Computational Imaging for Intelligence in Highly Scattering Aerosols (Final Report)

Natural and man-made degraded visual environments pose major threats to national security. The random scattering and absorption of light by tiny particles suspended in the air reduces situational awareness and causes unacceptable down-time for critical systems and operations. To improve the situation, we have developed several approaches to interpret the information contained within scattered light to enhance sensing and imaging in scattering media. These approaches were tested at the Sandia National Laboratory Fog Chamber facility and with tabletop fog chambers. Computationally efficient light transport models were developed and leveraged for computational sensing. The models are based on a weak angular dependence approximation to the Boltzmann or radiative transfer equation that appears to be applicable in both the moderate and highly scattering regimes. After the new model was experimentally validated, statistical approaches for detection, localization, and imaging of objects hidden in fog were developed and demonstrated. A binary hypothesis test and the Neyman-Pearson lemma provided the highest theoretically possible probability of detection for a specified false alarm rate and signal-to-noise ratio. Maximum likelihood estimation allowed estimation of the fog optical properties as well as the position, size, and reflection coefficient of an object in fog. A computational dehazing approach was implemented to reduce the effects of scatter on images, making object features more readily discernible. We have developed, characterized, and deployed a new Tabletop Fog Chamber capable of repeatably generating multiple unique fog-analogues for optical testing in degraded visual environments. We characterized this chamber using both optical and microphysical techniques. In doing so we have explored the ability of droplet nucleation theory to describe the aerosols generated within the chamber, as well as Mie scattering theory to describe the attenuation of light by said aerosols, and correlated the aerosol microphysics to optical properties such as transmission and meteorological optical range (MOR). This chamber has proved highly valuable and has supported multiple efforts inclusive to and exclusive of this LDRD project to test optics in degraded visual environments. Circularly polarized light has been found to maintain its polarization state better than linearly polarized light when propagating through fog. This was demonstrated experimentally in both the visible and short-wave infrared (SWIR) by imaging targets made of different commercially available retroreflective films. It was found that active circularly polarized imaging can increase contrast and range compared to linearly polarized imaging. We have completed an initial investigation of the capability for machine learning methods to reduce the effects of light scattering when imaging through fog. Previously acquired experimental long-wave images were used to train an autoencoder denoising architecture. Overfitting was found to be a problem because of lack of variability in the object type in this data set. The lessons learned were used to collect a well labeled dataset with much more variability using the Tabletop Fog Chamber that will be available for future studies. We have developed several new sensing methods using speckle intensity correlations. First, the ability to image moving objects in fog was shown, establishing that our unique speckle imaging method can be implemented in dynamic scattering media. Second, the speckle decorrelation over time was found to be sensitive to fog composition, implying extensions to fog characterization. Third, the ability to distinguish macroscopically identical objects on a far-subwavelength scale was demonstrated, suggesting numerous applications ranging from nanoscale defect detection to security. Fourth, we have shown the capability to simultaneously image and localize hidden objects, allowing the speckle imaging method to be effective without prior object positional information. Finally, an interferometric effect was presented that illustrates a new approach for analyzing speckle intensity correlations that may lead to more effective ways to localize and image moving objects. All of these results represent significant developments that challenge the limits of the application of speckle imaging and open important application spaces. A theory was developed and simulations were performed to assess the potential transverse resolution benefit of relative motion in structured illumination for radar systems. Results for a simplified radar system model indicate that significant resolution benefits are possible using data from scanning a structured beam over the target, with the use of appropriate signal processing.

58 GEOSCIENCES↗
DOE OSTI2022

Total Mercury Analysis of Radioactive Waste Containing Multiple Mercury Species

In this work, a direct mercury analyzer (DMA) was used to analyze total mercury in radioactive waste samples containing methylmercury and other forms of mercury including Hg o (elemental) together with inorganic ionic mercury species and complexes. These samples were also analyzed using Cold Vapor Atomic Absorption Spectroscopy (CVAAS) and/or Inductively Coupled Plasma Mass Spectroscopy (ICMS). Comparative statistical evaluation of the results from spike solutions/simulants, liquid radioactive waste samples, and interlaboratory performance test samples demonstrated that the various methods generated accurate and/or equivalent total mercury data and equivalent precision (2σ ± < 20%). Triplicate total mercury analysis of an exemplar radioactive waste resulted in an average value of 54.1 mg/L (as Hg) using CVAAS, 55.1 mg/L using ICPMS and 56.0 mg/L using DMA. A primary advantage of the DMA in a radioactive environment is avoiding multi-step, labor-intensive, time-consuming and waste-producing sample preparation protocols needed for CVAAS and ICPMS. DMA was determined to be the preferred method for measuring total mercury in the Savannah River National Laboratory (SRNL) radioanalytical laboratory based on analytical performance combined with ease of use in a radiological containment unit.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Machine learning assisted bayesian inference of mix and hot-spot conditions in NIF implosions

Experiments on the National Ignition Facility (NIF) have provided clear evidence of ablator material mixing into the Hot-Spot, leading to degraded performance. However, inferring the amount of mix and Hot-Spot conditions from typical experimental observations (e.g. x-ray spectra and images) is highly challenging. Here, we have developed an analysis method that utilizes machine learning assisted Bayesian inference to find the probability distributions of the Hot-Spot and mix conditions. This approach uses a neural network, trained on an idealized 2-dimensional representation of the Hot-Spot and mix distribution, and Bayesian inference to find the statistical distributions of Hot-Spot conditions that provide a match with observations. We have tested this method with synthetic data from simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗