Test and evaluation of principal component cluster images in LACIE
There are no author-identified significant results in this report.
Abotteen, R. A.↗
SEARCH · Search NASA
Results for “testing and evaluation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Large Area Crop Inventory Experiment (LACIE). Level 3 baseline; Test and Evaluation (T and E) requirements, volume 9
There are no author-identified significant results in this report.
Source record↗
Label Identification from Statistical Tabulation (LIST) test and evaluation
There are no author-identified significant results in this report.
Pore, M. D.↗
Large Area Crop Inventory Experiment (LACIE). Bibliographic addenda, technical reports, papers, and memorandums published under supporting research and technology and other research, test, and evaluation contracts for the Earth observations division
There are no author-identified significant results in this report.
Aumann, J. B.↗
Design, evaluation and test of an electronic, multivariable control for the F100 turbofan engine
A digital, multivariable control design procedure for the F100 turbofan engine is described. The controller is based on locally linear synthesis techniques using linear, quadratic regulator design methods. The control structure uses an explicit model reference form with proportional and integral feedback near a nominal trajectory. Modeling issues, design procedures for the control law and the estimation of poorly measured variables are presented.
Skira, C. A.↗
Test and evaluation of water vapor radiometers
The accuracy of very long baseline interferometry in geodetic and astrometric applications is primarily limited by the propagation delays through the troposphere. The part of this delay that is most difficult to predict is due to atmospheric water vapor which can contribute up to about 40 cm of excess propagation path at microwave frequencies. The water vapor content in the atmosphere is variable and is not well correlated with surface meteorological variables. The brightness temperature measured near the transition of water vapor at 22.2 GHz and the propagation delay due to water vapor, or wet path length, are well correlated. This correlation is not perfect because the absorption coefficient and index of refraction do not have the same dependence on temperature and pressure.
Moran, J.↗
Automated pilot advisory system test and evaluation at Manassas Municipal Airport
In cooperation with the Federal Aviation Administration, NASA developed an experimental automated pilot advisory system (APAS) to provide airport and air traffic advisories at high density uncontrolled airports. The APAS concept is to utilize low cost automated systems to provide the necessary information for pilots to more safely plan and execute approach and landing at uncontrolled high density airports. The system is designed to be a natural extension of the procedural visual flight rules system used at uncontrolled airports and, as an advisory system, will enhance the "see-and-be-seen" rule and an evaluation of the APAS concept was obtained from pilots who used the system at the Manassas, Virginia airport. These evaluations and the system performance are presented.
Parks, J. L., Jr.↗
Study for fabrication, evaluation, and testing of monolayer woven type materials for space suit insulation
An alternative space suit insulation concept using a monolayer woven pile material is discussed. The material reduces cost and improves the durability of the overgarment, while providing protection similar to that provided by multilayer insulation (MLI). Twelve samples of different configurations were fabricated and tested for compressibility and thermal conductivity as a function of compression loading. Two samples which showed good results in the initial tests were further tested for thermal conductivity with respect to ambient pressure and temperature. Results of these tests were similar to results of the MLI tests, indicating the potential of the monolayer fabric to replace the present MLI. A seaming study illustrated that the fabric can be sewn in a structurally sound seam with minimal heat loss. It is recommended that a prototype thermal meteroid garment be fabricated.
Merrick, E. B.↗
Analysis, testing, and evaluation of faulted and unfaulted Wye, Delta, and open Delta connected electromechanical actuators
Mathematical models capable of simulating the transient, steady state, and faulted performance characteristics of various brushless dc machine-PSA (power switching assembly) configurations were developed. These systems are intended for possible future use as primemovers in EMAs (electromechanical actuators) for flight control applications. These machine-PSA configurations include wye, delta, and open-delta connected systems. The research performed under this contract was initially broken down into the following six tasks: development of mathematical models for various machine-PSA configurations; experimental validation of the model for failure modes; experimental validation of the mathematical model for shorted turn-failure modes; tradeoff study; and documentation of results and methodology.
Nehl, T. W.↗
Test and evaluation plan for the Centralized Storm Information System
The installation of the Centralized Storm Information System (CSIS) at the NOAA operational complex in Kansas City, Missouri is described. This complex includes the National Severe Storms Forecast center and a Satellite Field Service Station which is denoted in this research plan as NSSFC. CSIS computers will act in concert to merge analyze the many data sets needed to forecast severe convective storms. Specific aspects of CSIS are evaluated against the CSIS objectives. The functions to be evaluated characterize the attributes of a generalized interactive computer system. A major development in the CSIS program will allow communication between CSIS and the NSSFC Eclipse computer.
Source record↗
CSIS test and evaluation
This report covers the period from February 1982 when the Centralized Storm Information System CSIS was installed at NSSFC through June 1983. CSIS has had a dramatic and positive impact on the operations of the NSSFC. The value of CSIS in improving the level of severe storms forecasting is evaluated. The following CSIS components are examined: (1) hardware; (2) data acquisition; (3) data storage and retrieval; (4) forecaster-machine interface; (5) user training and requirement; (6) system relibility; and (7) software documentation.
Siebers, A. L.↗
Evaluating software testing strategies
The strategies of code reading, functional testing, and structural testing are compared in three aspects of software testing: fault detection effectiveness, fault detection cost, and classes of faults detected. The major results are the following: (1) Code readers detected more faults than did those using the other techniques, while functional tester detected more faults than did structural testers; (2) Code readers had a higher fault detection rate than did those using the other methods, while there was no difference between functional testers and structural testers; (3) Subjects testing the abstract data type detected the most faults and had the highest fault detection rate, while individuals testing the database maintainer found the fewest faults and spent the most effort testing; (4) Subjects of intermediate and junior expertise were not different in number or percentage of faults found, fault detection rate, or fault detection effort; (5) subjects of advanced expertise found a greater number of faults than did the others, found a greater percentage of faults than did just those of junior expertise, and were not different from the others in either fault detection rate or effort; and (6) Code readers and functional testers both detected more omission faults and more control faults than did structural testers, while code readers detected more interface faults than did those using the other methods.
Selby, R. W., Jr.↗
HALOE test and evaluation software
Computer programming, system development and analysis efforts during this contract were carried out in support of the Halogen Occultation Experiment (HALOE) at NASA/Langley. Support in the major areas of data acquisition and monitoring, data reduction and system development are described along with a brief explanation of the HALOE project. Documented listings of major software are located in the appendix.
Edmonds, W.↗
Experiences in extraction of contact parameters from process-evaluation test-structures
Six-terminal-contact test structures are introduced for characterizing ohmic contacts between a metal and a heavily doped semiconductor layer. Specifically, the six-terminal test structure supplies the additional information needed in order to calculate the transmission length and eventual corrections to the characteristic resistance per unit width due to finite contact length. The essential feature of this test structure is a square contact with four taps in the lower (semiconductor) layer. Every other one of these taps is used for current injection ('front'). From the voltage drop at the opposite tap and the side taps, the 'end' resistance and the 'side' resistances are calculated. The test structures are shown to give valuable information complementary to the common front resistance measurements. The interfacial resistivity is obtained directly after proper correction for flange effects.
Lieneweg, Udo↗
The Test and Evaluation of Non-Chromate Finishing Agent
Clark Atlanta University (CAU) has engaged a team comprised of university faculty members, student research assistants, and consultants from industrial and technology firms in order to ensure that NASA receives a quality product on time and within budget. In addition to the current related expertise which CAU possess, we have enlisted materials and aid from several other agencies, and machine manufacturers to assist us in completing the project on time and according to plan and budget. The research team is employing sound engineering principles in its approach to this project. Each phase of the project is preceded by a thorough and complete planning session that details the work plan and provide a comprehensive review of the work to be accomplished during the particular phase and by whom. Maximum use is being made of existing or already planned capabilities to ensure maximum economy, and frequent online reviews are being held to measure progress and to identify a potential problem in sufficient time to allow for corrective action.
Okhio, Cyril↗
CLV First Stage Design, Development, Test and Evaluation
The Crew Launch Vehicle (CLV) is an integral part of NASA's Exploration architecture that will provide crew and cargo access to the International Space Station as well as low earth orbit support for lunar missions. Currently in the system definition phase, the CLV is planned to replace the Space Shuttle for crew transport in the post 2010 time frame. It is comprised of a solid rocket booster first stage derived from the current Space Shuttle SRB, a LOX/hydrogen liquid fueled second stage utilizing a derivative of the Space Shuttle Main Engine (SSME) for propulsion, and a Crew Exploration Vehicle (GEV) composed of Command and Service Modules. This paper deals with current DDT&E planning for the CLV first stage solid rocket booster. Described are the current overall point-of-departure design and booster subsystems, systems engineering approach, and milestone schedule requirements.
Burt, Richard K.↗
CNES Approaching Guidance Experiment within FFIORD
This article outlines the relative orbit control (guidance algorithm and its preliminary performance tests evaluation) that will be tested by the CNES Team on FFIORD (Formation Flying In Orbit Ranging Demonstration) onboard PRISMA mission. After a brief summary of the PRISMA mission context, the paper provides a full description of the rendezvous function involved in the approaching guidance experiment. This FFIORD onboard function is detailed in terms of on-board algorithmic method (basic algorithm and enhanced alternative), sensibility analysis used to construct maneuver plans and preliminary tests results.
Berges, Jean-Claude↗
Design Development Test and Evaluation (DDT and E) Considerations for Safe and Reliable Human Rated Spacecraft Systems
A team directed by the NASA Engineering and Safety Center (NESC) collected methodologies for how best to develop safe and reliable human rated systems and how to identify the drivers that provide the basis for assessing safety and reliability. The team also identified techniques, methodologies, and best practices to assure that NASA can develop safe and reliable human rated systems. The results are drawn from a wide variety of resources, from experts involved with the space program since its inception to the best-practices espoused in contemporary engineering doctrine. This report focuses on safety and reliability considerations and does not duplicate or update any existing references. Neither does it intend to replace existing standards and policy.
Miller, James↗