Results for “well integrity” — Page 26

NASA NTRSDate not supplied

Assessment of the Mars 2020 Entry, Descent, and Landing Simulation

On February 18, 2021, the Mars 2020 Perseverance rover successfully landed inside Jezero Crater at 18.44463 deg North latitude and 77.45088 deg East longitude. At 1026 kg, Perseverance is the largest, most sophisticated rover ever delivered to another planet. This event marked the ninth successful landing and fifth rover to be delivered at Mars. The Program to Optimize Simulated Trajectories II (POST2) is a trajectory simulation tool maintained by the NASA Langley Research Center. POST2 was the prime EDL performance simulation for Mars 2020. This tool has significant heritage on the previous Pathfinder, MER, Phoenix, InSight, and MSL landings. This paper presents a few initial comparisons between EDL flight telemetry and POST2 simulation predictions. These comparisons are important in order to understand how each of the individual models performed, as well as the integrated simulation as a whole. This information is fed forward to future missions, which benefit from the knowing where additional resources or study are needed and where uncertainties may be reduced to enable improved performance.

David W Way↗

NASA NTRSDate not supplied

Assessment of the Mars 2020 Entry, Descent, and Landing Simulation

On February 18, 2021, the Mars 2020 Perseverance rover successfully landed inside Jezero Crater at 18.44463 deg North latitude and 77.45088 deg East longitude. At 1026 kg, Perseverance is the largest, most sophisticated rover ever delivered to another planet. This event marked the ninth successful landing and fifth rover to be delivered at Mars. The Program to Optimize Simulated Trajectories II (POST2) is a trajectory simulation tool maintained by the NASA Langley Research Center. POST2 was the prime EDL performance simulation for Mars 2020. This tool has significant heritage on the previous Pathfinder, MER, Phoenix, InSight, and MSL landings. This paper presents a few initial comparisons between EDL flight telemetry and POST2 simulation predictions. These comparisons are important in order to understand how each of the individual models performed, as well as the integrated simulation as a whole. This information is fed forward to future missions, which benefit from the knowing where additional resources or study are needed and where uncertainties may be reduced to enable improved performance.

David Way↗

NASA NTRSDate not supplied

Overview of JAXA and NASA Collaboration on Manned and Unmanned Aircraft Operations Integration in Disaster Response

Natural disasters have increased in frequency and intensity. With that increase has come an increased focus on improving disaster response efforts. As part of this focus, the Japan Aerospace Exploration Agency (JAXA) and the National Aeronautics and Space Administration (NASA) have been in collaboration since 2016 to explore improved airspace management for disaster response through the integration of manned aircraft and small Unmanned Aircraft Systems (UAS). The approach to this integration has been through leveraging JAXA’s Disaster Relief Aircraft Information Sharing Network (D-NET) system for the coordinated management of manned aircraft assets combined with NASA’S UAS Traffic Management (UTM) system for the management of UAS assets. To drive the innovation in improved response, JAXA and NASA have successfully connected respective systems and conducted a series of live flight tests first as part of a large-scale disaster drill and later in dedicated research flights. In each case, the D-NET and UTM systems were connected and exchanged data in real-time, which supported the planning and tracking of manned and unmanned operations. Through these test events, a number of key findings were derived through data analysis and stakeholder interviews with respect to the improvements offered by the integrated systems as well as key considerations for situation awareness of pilots regarding other operations in the airspace and flight path management.

disaster response↗

NASA NTRSDate not supplied

Full Stall Simulations of a Redesigned Ventilation Fan for the ISS

The concept of a stall is studied rigorously in the aerospace industry. From a design standpoint, instabilities such as stall are undesirable– operation in the stall regime has a tremendous impact on aerodynamic performance as well as structural integrity. In extreme cases, operating in stall conditions can cause failure. Further, stall can cause a loss of lift on aircraft wings or a loss of thrust in aircraft engines. In any case, stall continues to be a topic of interest in the aerospace industry. The present work aims to analyze the stall characteristics of a ventilation fan that was recently designed for the International Space Station (ISS). Although the ventilation fan has a rotor-stator design, this paper considers a rotor-only configuration. The FUN3D Computational Fluid Dynamic (CFD) solver developed by NASA Langley Research Center was used to simulate the operational characteristics of the ventilation fan. FUN3D solves the Unsteady Reynolds-Averaged Naiver-Stokes (URANS) equations using implicit time marching and a dynamic overset grid. The FUN3D solver was originally written for exterior flow fields; however, this work represents an extension of the FUN3D solver to turbomachinery or interior flow fields. The FUN3D results for the rotor-only ventilation fan accurately captured the operational characteristics inherent to compressors– the results shared similar performance trends when compared to the experimental results for the rotor-stator case. A peak adiabatic efficiency of 96% occurred at a MFR of 105.2 CFM, the minimum aerodynamically stable point. A computationally stable stall occurred at a mass flow rate of 43.8 CFM where the adiabatic efficiency dropped to 69%.

CFD↗

NASA NTRSDate not supplied

Assessment of Control Algorithms for Mars Entry Vehicles With Flap-Based Trajectory Control Under Uncertainty

Flap-based steering systems on blunt-body entry vehicles may improve flight performance relative to heritage bank-angle steering systems. Successful implementation of articulating aerodynamic flaps on a hypersonic entry vehicle requires an active control system to map angle of attack and sidelip angle commands to flap deflection commands. Here, a successive-linearization model prective control algorithm, as a linear quadratic regulator, are formulated, designed, and assessed to address this multiple input multiple output control problem. These two control algorithms are assessed under uncertainty in Monte Carlo simulations for various control profiles and vehicle configurations. Results indicate that while both control algorithms provide successful command tracking under uncertainty, the model predictive controller provides a lower mean and integral error, as well as greater robustness, relative to the linear-quadratic regulator.

Daniel L Engel↗

NASA NTRSDate not supplied

Progressive Development of Fleet Management Capabilities for a High Density Vertiplex Environment

The High Density Vertiplex (HDV) Sub-Project, as part of NASA’s Advanced Air Mobility (AAM) Project, has been developing a reference automation architecture with a far-term view of scalable, high-density operations in and around vertiport terminal areas. One of the components of that architecture under development has been focused on fleet management capabilities to support the management of multiple AAM operations from a supervisory role of a fleet manager. This capability relies on connectivity and information exchanges with other services for airspace and vertiport management as well as with flight crews responsible for operation execution. This paper will present this capability with a focus on its user interface developments as well as its integration into the simulation and flight testing performed as part of the HDV research roadmap.

AAM↗

NASA NTRS2023

Towards an Indian Land Data Assimilation System (ILDAS): A Coupled Hydrologic-Hydraulic System for Water Balance Assessments

Effective management of water resources requires reliable estimates of land surface states and fluxes, including water balance components. But most land surface models run in uncoupled mode and do not produce river discharge at catchment scales to be useful for water resources management applications. Such integrated systems are also rare over India where hydrometeorological extremes have wreaked havoc on the economy and people. So, an Indian Land Data Assimilation System (ILDAS) with a coupled land surface and a hydrodynamic model has been developed and driven by multiple meteorological forcings (0.1°, daily) to estimate land surface states, channel discharge, and floodplain inundation. ILDAS benefits from an integrated framework as well as the largest suite of observation records collected over India and has been used to produce a reanalysis product for 1981–2021 using four forcing datasets, namely, Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2), Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS), ECMWF’s ERA-5, and Indian Meteorological Department (IMD) gridded precipitation. We assessed the uncertainty and bias in these precipitation datasets and validated all major components of the terrestrial water balance, i.e., surface runoff, soil moisture, terrestrial water storage anomalies, evapotranspiration, and streamflow, against a combination of satellite and in situ observation datasets. Our assessment shows that ILDAS can represent the hydrological processes reasonably well over the Indian landmass with IMD precipitation showing the best relative performance. Evaluation against ESA-CCI soil moisture shows that MERRA-2 based estimates outperform the others, whereas ERA-5 performs best in simulating evapotranspiration when evaluated against MODIS ET. Evaluations against observed records show that CHIRPS-based estimates have the highest performance in reconstructing surface runoff and streamflow. Once operational, this system will be useful for supporting transboundary water management decision making in the region.

Indian Land Data Assimilation System (ILDAS)↗

NASA NTRSDate not supplied

Progressive Development of Fleet Management Capabilities for a High Density Vertiplex Environment

The High Density Vertiplex (HDV) Sub-Project, as part of NASA’s Advanced Air Mobility (AAM) Project, has been developing a reference automation architecture with a far-term view of scalable, high-density operations in and around vertiport terminal areas. One of the components of that architecture under development has been focused on fleet management capabilities to support the management of multiple AAM operations from a supervisory role of a fleet manager. This capability relies on connectivity and information exchanges with other services for airspace and vertiport management as well as with flight crews responsible for operation execution. This paper will present this capability with a focus on its user interface developments as well as its integration into the simulation and flight testing performed as part of the HDV research roadmap.

high density vertiport↗

DOE OSTI2020

OECD/NEA COUPLED NEUTRONIC/THERMAL-FLUIDS BENCHMARK OF THE MHTGR-350 MW CORE DESIGN: RESULTS FOR PHASE-I EXERCISE 1

This report presents the results from code-to-code comparisons for a prismatic modular high-temperature gas-cooled reactor 350-MW design for steady-state neutron transport calculations. Integral parameters as well as power and flux distributions are provided. Differences between solutions from diffusion and transport operators are analysed. Effects of control rod homogenization between full block and one sixth block are discussed.

42 ENGINEERING↗

DOE OSTI2022

Agency Recognized for Integrated Controls for HVAC and Lighting Systems - Case Study: Denver Water

This case study highlights the strategies Denver Water used at its Administration Building for integrating HVAC and lighting systems. They employed advanced lighting controls, integrated with building automation systems, as well as lighting system occupancy sensors integrated with HVAC controls. The project was recognized by DOE's Integrated Lighting Campaign.

integrated lighting, lighting, controls, HVAC, bui↗

DOE OSTI2025

Reassessing the Origins and Contemporary Relevance of ck Acceptability Parameters: Evolving Perspectives on Similarity

“Sensitivity and Uncertainty Analyses Applied to Criticality Safety Validation,” introduces sensitivity and uncertainty methods to address challenges in defining and extending areas of applicability for criticality safety validation. These areas are traditionally defined by the bounds or limits on key parameters, but establishing valid ranges and managing complex parameter variations remain challenging. NUREG/CR-6655 introduces ck and other integral indices, as well as concepts such as the completeness of benchmark coverage, to better quantify system similarities. The work proposed herein seeks to evaluate these foundational concepts to ensure that the bounds remain effective in guiding the assessment of similarity and applicability in modern applications. The concept of completeness, along with other parameters envisioned within the framework, serves as an example of the foundational ideas that have been established, though their effectiveness in practice may not be fully understood. Advancements in scripting tools, coupled with the speed and efficiency of modern computing and statistical models, now allow for faster and more thorough assessments than previously possible. These advancements also enable the identification of trends within the data, which could provide additional insight into system behavior and further broaden the scope of previously performed benchmarks. By leveraging these capabilities, we will revisit and expand the scope of these foundational methods to determine whether the necessary elements for robust similarity evaluation are already embedded, partially realized, or remain untapped.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

REFRACTORY COMPACT HEAT EXCHANGERS WITH EMBEDDED SENSORS ENABLED BY HYBRID ADVANCED SINTERING AND ADDITIVE APPROACH

Structural health monitoring (SHM) of compact heat exchangers (CHXs) operating in extreme environments is essential for ensuring system reliability, safety, and longevity. This study presents the development of high-temperature sensors fabricated via aerosol jet printing (AJP) using platinum ink, selected for its exceptional thermal stability, oxidation resistance, and electrical conductivity. AJP enables precise deposition of fine-feature sensor patterns onto complex geometries, making it well-suited for integration within CHX architectures. To enhance sensor durability, an alumina-based ceramic protective layer was printed over the platinum sensing elements. The sensors demonstrated stable, repeatable performance up to 900?°C during extended thermal cycling. A custom test setup was developed to evaluate sensor accuracy and robustness under steady-state and transient conditions. Substrate screening identified HG-1 ceramic-coated stainless steel as the most effective platform, offering strong adhesion and low resistance. Furthermore, electric field-assisted sintering (EFAS) was employed to embed the sensors into stainless steel 316L matrices without degrading their functionality. Post-embedding electrical tests confirmed sensor integrity, and initial characterization suggests strong potential for in-situ monitoring. This work provides a scalable strategy for integrating high-performance temperature sensors directly into refractory components, advancing embedded SHM technologies for harsh operating environments.

36 - MATERIALS SCIENCE↗

DOE OSTI2021

Decomposition of Feynman integrals by multivariate intersection numbers

We present a detailed description of the recent idea for a direct decomposition of Feynman integrals onto a basis of master integrals by projections, as well as a direct derivation of the differential equations satisfied by the master integrals, employing multivariate intersection numbers. We discuss a recursive algorithm for the computation of multivariate intersection numbers, and provide three different approaches for a direct decomposition of Feynman integrals, which we dub the straight decomposition, the bottom-up decomposition, and the top-down decomposition. These algorithms exploit the unitarity structure of Feynman integrals by computing intersection numbers supported on cuts, in various orders, thus showing the synthesis of the intersection-theory concepts with unitarity-based methods and integrand decomposition. We perform explicit computations to exemplify all of these approaches applied to Feynman integrals, paving a way towards potential applications to generic multi-loop integrals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS2003

Resolution of sensory ambiguities for gaze stabilization requires a second neural integrator

The ability to simultaneously move in the world and maintain stable visual perception depends critically on the contribution of vestibulo-ocular reflexes (VORs) to gaze stabilization. It is traditionally believed that semicircular canal signals drive compensatory responses to rotational head disturbances (rotational VOR), whereas otolith signals compensate for translational movements [translational VOR (TVOR)]. However, a sensory ambiguity exists because otolith afferents are activated similarly during head translations and reorientations relative to gravity (i.e., tilts). Extra-otolith cues are, therefore, necessary to ensure that dynamic head tilts do not elicit a TVOR. To investigate how extra-otolith signals contribute, we characterized the temporal and viewing distance-dependent properties of a TVOR elicited in the absence of a lateral acceleration stimulus to the otoliths during combined translational/rotational motion. We show that, in addition to otolith signals, angular head position signals derived by integrating sensory canal information drive the TVOR. A physiological basis for these results is proposed in a model with two distinct integration steps. Upstream of the well known oculomotor velocity-to-position neural integrator, the model incorporates a separate integration element that could represent the "velocity storage integrator," whose functional role in the oculomotor system has so far remained controversial. We propose that a key functional purpose of the velocity storage network is to temporally integrate semicircular canal signals, so that they may be used to extract translation information from ambiguous otolith afferent signals in the natural and functionally relevant bandwidth of head movements.

Non-NASA Center↗

NASA NTRSDate not supplied

Bowtie Analysis of the Effects of Unmanned Aircraft on Air Traffic Control

Within the aviation domain, there is a growing industry demand to develop and integrate remotely piloted operations into the National Airspace System. However, it is not yet well understood how the integration of unmanned aircraft with impact air traffic control, and specifically, the air traffic controllers who are at the sharp end of this safety critical system. This research presented in this paper aimed to begin to address this gap in understanding by identifying and exploring potential hazards associated with introducing Unmanned Aircraft into the national airspace system, and identify possible mitigations to reduce identified risks. A bowtie risk analysis methodology was used to identify and analyze hazards. A focus-group format discussion was conducted with nine subject matter experts as participants. Findings identified five areas of potential risk, each associated with multiple hazards. Mitigations for each hazard are reported. Findings have essential implications for the safe and efficient integration of unmanned aircraft into the national airspace.

Tamsyn Edwards↗

NASA NTRS2021

Bowtie Analysis of the Effects of Unmanned Aircraft on Air Traffic Control

Within the aviation domain, there is a growing industry demand to develop and integrate remotely piloted operations into the National Airspace System. However, it is not yet well understood how the integration of unmanned aircraft with impact air traffic control, and specifically, the air traffic controllers who are at the sharp end of this safety critical system. This research presented in this paper aimed to begin to address this gap in understanding by identifying and exploring potential hazards associated with introducing Unmanned Aircraft into the national airspace system, and identify possible mitigations to reduce identified risks. A bowtie risk analysis methodology was used to identify and analyze hazards. A focus-group format discussion was conducted with nine subject matter experts as participants. Findings identified five areas of potential risk, each associated with multiple hazards. Mitigations for each hazard are reported. Findings have essential implications for the safe and efficient integration of unmanned aircraft into the national airspace.

unmanned aerial vehicles↗

DOE OSTI2024

The Integration and Mapping of an Open-Source National Well Resource to Inform Geologic Carbon Storage Site Selection and Risk Prevention: The CO2-Locate Database

Geologic carbon storage (GCS) offers a way to capture and permanently store CO₂ from fossil fuel operations in underground geologic structures, aiding in the transition to a carbon-neutral energy economy. However, CO₂ injection sites can experience gas leakage through existing wells that penetrate storage reservoirs, making knowledge of well locations and characteristics crucial for permitting, infrastructure reusability, and risk assessment in GCS. Currently, public wellbore data from state, federal, and tribal entities are inconsistent and fragmented, with gaps and redundancies. To address this, the National Energy Technology Laboratory (NETL) developed CO2-Locate, an open-source, geospatial database and online application. CO2-Locate integrates over 50 data sources from federal, state, and tribal entities, creating a standardized national well database. Funded by the Bipartisan Infrastructure Law, the database is publicly available through the Energy Data eXchange (EDX) and viewable via the CO2-Locate web mapping application. This tool allows users to query, filter, and visualize well data to support GCS planning, permitting, and risk assessments. This presentation covers the methods used to create CO2-Locate, including data acquisition, processing, attribute mapping, and integration, much of which is automated for future updates. The web mapping application and its role in GCS site selection will also be discussed.

Tetteh, Daniel A.↗

DOE OSTI2024

CO2-Locate: A Living National Well Database

This is a presentation on NETL's CO2-Locate Database, an integrated resource of standardized public well records focusing on oil and gas well data acquired from federal, state, and tribal entities. This presentation covers updates on the resource, the integration method, and how CO2-Locate is being used as a baseline to support cross-cutting infrastructure projects.

Romeo, Lucy↗