Search NASA⌕ Search

SEARCH · Search NASA

Results for “Aircraft Specifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Introduction to session on materials and structures

A review was given of the development of composites for aircraft. Supporting base technology and the Aircraft Energy Efficiency Composites Program are included. Specific topics discussed include: (1) environmental effects on materials; (2) material quality and chemical characterization; (3) design and analysis methods; (4) structural durability; (5) impact sensitivity; (6) carbon fiber electrical effects; and (7) composite components.

Vosteen, L. F.↗
NASA NTRS1978

Tropospheric ozone distributions measured with an airborne laser absorption spectrometer

Measurements of tropospheric ozone have been made in the southern and middle California regions and over the Pacific Ocean during two series of flights in February and May 1977. The data were obtained by using a laser absorption spectrometer, a nadir-viewing instrument which remotely measures the ozone column abundance between ground level and aircraft altitude by interacting with ozone at specific wavelengths near 9.5 microns. The measurements indicate significantly lower ozone abundances above the Mojave Desert region as compared with farm, forest, and urban areas. The average tropospheric column density was found to be 0.0027 atm cm/km over the California region and 0.0035 atm cm/km over the Pacific Ocean region 1000-2000 km west of the coast of Mexico.

Menzies, R. T.↗
NASA NTRS1976

Some recent progress in transonic flow computation

Although the development of a finite difference relaxation procedure to solve the steady form of equations of motion gave birth to the study of computational transonic aerodynamics and considerable progress has been made using the small disturbance theory, no general analytical solution method yet exists for transonic flows that include three dimensional unsteady, and viscous effects. Two techniques are described which are useful in computational transonic aerodynamics applications. The finite volume method simplifies the application of boundary conditions without introducing the constriction associated with small disturbance theory. Governing equations are solved in a Cartesian coordinate system using a body-oriented and shock-oriented mesh network. Only the volume and surface normal directions of the volume elements must be known. The other method, configuration design by numerical optimization, can be used by aircraft designers to develop configurations that satisfy specific geometric performance constraints. Two examples of airfoil design by numerical optimization are presented.

Ballhaus, W. F.↗
NASA NTRS1980

On evaluating the performability of degradable computing systems

If the performance of a computing system is 'degradable', performance and reliability issues must be dealt with simultaneously in the process of evaluating system effectiveness. For this purpose, a unified measure, called 'performability', is introduced and the foundations of performability modeling and evaluation are established. A critical step in the modeling process is the introduction of a 'capability function' which relates low-level system behavior to user-oriented performance levels. A hierarchical modeling scheme is used to formulate the capability function and capability is used, in turn, to evaluate performability. These techniques are then illustrated for a specific application: the performability evaluation of an aircraft computer in the environment of an air transport mission.

Meyer, J. F.↗
NASA NTRS1979

VTOL control for shipboard landing in high sea states

A control algorithm is developed for a VTOL type aircraft landing on a small ship in rough seas. The work covers modelling the dynamics of the two vehicles, the design of an aircraft-tracking-ship-motion controller, and the specification of an actual landing control algorithm. The landing controller design is more practical and found to perform better than the hover controller. In addition to outlining a design technique, the results provide design guidelines and performance bounds for practical landing control systems.

Mcmuldroch, C. G.↗
NASA NTRS1983

Characteristics of the transmission loss apparatus at NASA Langley Research Center

A description of the Transmission Loss Apparatus at NASA Langley Research Center, which is specifically designed to accommodate general aviation type aircraft structures, is presented. The measurement methodology, referred to as the Plate Reference Method, is discussed and compared with the classical method as described in the Standard of the American Society for Testing and Materials. This measurement procedure enables reliable and accurate noise transmission loss measurements down to the 50 Hz one-third octave band. The transmission loss characteristics of add-on acoustical treatments, applied to the basic structure, can be established by inclusion of appropriate absorption corrections for the treatment.

Grosveld, F. W.↗
NASA NTRS1983

A portable x-ray analyzer for wearmetal particles in lubricants

An extensive program exists for the systematic sampling and analysis of lubricants in U.S. Air Force aircraft engines. The sudden development of excessive engine wear can usually be detected on the basis of monitoring the concentration of several key metallic elements for each aircraft engine. In many cases even the specific fault within an engine can be recognized. The two types of equipment which are currently being employed for the conduction of oil analyses make use of atomic emission or atomic absorption spectroscopy. In both cases, heavy, large, and relatively fragile pieces of equipment are involved. Difficulties concerning the transportation of these devices have led to the development of a small, sturdy, and easily portable wearmetal analyzer. The analyzer makes use of an X-ray fluorescence technique.

Clark, B. C.↗
NASA NTRS1985

Understanding the Radiant Scattering Behavior of Vegetated Scenes

Knowledge of the physics of the scattering behavior of vegetation will ultimately serve the remote sensing and earth science community in many ways. For example, it will provide: (1) insight and guidance in developing new extraction techniques of canopy characteristics, (2) a basis for better interpretation of off-nadir satellite and aircraft data, (3) a basis for defining specifications of future earth observing sensor systems, and (4) a basis for defining important aspects of physical and biological processes of the plant system. The overall objective of the three-year study is to improve our fundamental understanding of the dynamics of directional scattering properties of vegetation canopies through analysis of field data and model simulation data. The specific objectives are to: (1) collect directional reflectance data covering the entire exitance hemisphere for several common vegetation canopies with various geometric structure (both homogeneous and row crop structures), (2) develop a scene radiation model with a general mathematical framework which will treat 3-D variability in heterogeneous scenes and account for 3-D radiant interactions within the scene, (3) conduct validations of the model on collected data sets, and (4) test and expand proposed physical scattering mechanisms involved in reflectance distribution dynamics by analyzing both field and modeling data.

Kimes, D. S.↗
NASA NTRS1987

Acceleration display system for aircraft zero-gravity research

The features, design, calibration, and testing of Lewis Research Center's acceleration display system for aircraft zero-gravity research are described. Specific circuit schematics and system specifications are included as well as representative data traces from flown trajectories. Other observations learned from developing and using this system are mentioned where appropriate. The system, now a permanent part of the Lewis Learjet zero-gravity program, provides legible, concise, and necessary guidance information enabling pilots to routinely fly accurate zero-gravity trajectories. Regular use of this system resulted in improvements of the Learjet zero-gravity flight techniques, including a technique to minimize later accelerations. Lewis Gates Learjet trajectory data show that accelerations can be reliably sustained within 0.01 g for 5 consecutive seconds, within 0.02 g for 7 consecutive seconds, and within 0.04 g for up to 20 second. Lewis followed the past practices of acceleration measurement, yet focussed on the acceleration displays. Refinements based on flight experience included evolving the ranges, resolutions, and frequency responses to fit the pilot and the Learjet responses.

Millis, Marc G.↗
NASA NTRS1990

The use of an airborne lidar for mapping cirrus clouds in FIRE, phase 2

The Univ. of Washington (UW) and Georgia Tech have recently built a dual wavelength airborne lidar for operation on the UW's Convair C-131A research aircraft. This lidar was used in studying aerosols and clouds. These studies demonstrated the utility of airborne lidar in a variety of atmospheric research and prompt the suggestion that this facility be included in the next FIRE cirrus experiment. The vertically pointing airborne lidar would be used as a complement to ground based lidars. The airborne lidar would ensure extended coverage of IFO cases that develop upwind of the surface lidars or which miss the ground based lidars while still being the focus of satellite and aircraft in situ studies. The airborne lidar would help assure that cirrus clouds were simultaneously viewed by satellite, sampled by aircraft, and structurally characterized by lidar. System specifications are listed and a schematic is shown of the lidar system aboard the C-131A.

Radke, Lawrence F.↗
NASA NTRS1998

Development and Testing of a High Stability Engine Control (HISTEC) System

Flight tests were recently completed to demonstrate an inlet-distortion-tolerant engine control system. These flight tests were part of NASA's High Stability Engine Control (HISTEC) program. The objective of the HISTEC program was to design, develop, and flight demonstrate an advanced integrated engine control system that uses measurement-based, real-time estimates of inlet airflow distortion to enhance engine stability. With improved stability and tolerance of inlet airflow distortion, future engine designs may benefit from a reduction in design stall-margin requirements and enhanced reliability, with a corresponding increase in performance and decrease in fuel consumption. This paper describes the HISTEC methodology, presents an aircraft test bed description (including HISTEC-specific modifications) and verification and validation ground tests. Additionally, flight test safety considerations, test plan and technique design and approach, and flight operations are addressed. Some illustrative results are presented to demonstrate the type of analysis and results produced from the flight test program.

Orme, John S.↗
NASA NTRS1998

Situation Awareness Information Requirements for Commercial Airline Pilots

Situation awareness is presented as a fundamental requirement for good airmanship, forming the basis for pilot decision making and performance. To develop a better understanding of the role of situation awareness in flying, an analysis was performed to determine the specific situation awareness information requirements for commercial aircraft pilots. This was conducted as a goal-directed task analysis in which pilots' major goals, subgoals, decisions, and associated situation awareness information requirements were delineated based on elicitation from experienced commercial airline pilots. A determination of the major situation awareness information requirements for visual and instrument flight was developed from this analysis, providing a foundation for future system development which seeks to enhance pilot situation awareness and provide a basis for the development of situation awareness measures for commercial flight.

Endsley, Mica R.↗
NASA NTRS1997

Compressor Case Manufactured Using High-Temperature Polyimides

High-temperature polymer composites (PMC's) offer lighter weight and higher specific strengths than titanium alloys for advanced aircraft engine applications-especially in fan and compressor components, where temperatures do not exceed 550 F (288 C). VCAP, a polyimide resin developed at the NASA Lewis Research Center, was filament wound at Lincoln Composites in Lincoln, Nebraska, with graphite and glass fibers to produce a lightweight compressor case for an Integrated High Performance Turbine Engine Technology (IHPTET) engine. This engine application requires a PMC that can withstand air pressures (60 psi) and temperatures exceeding the degradation limits of other high-temperature polyimides, such as PMR-15.

Sutter, James K.↗
NASA NTRS2007

NASA ER-2: Flying Laboratory for Earth Science Studies

This viewgraph presentation gives an overview of the NASA ER-2 aircraft. The contents include: 1) ER-2 Specifications; 2) ER-2 Basic Configuration; 3) ER-2 Payload Areas: Nose Area; 4) ER-2 Payload Areas: SuperPod Fore and Aftbody; 5) ER-2 Payload Areas: SuperPod Midbody; 6) ER-2 Payload Areas: Q-Bay; 7) ER-2 Payload Areas: Q-Bay Hatch Designs; 8) ER-2 Payload Areas: External Pods; 9) ER-2 Electrical/Control Interface; 10) ER-2 Typical Flight Profile; 11) Tropical Composition, Cloud and Climate Coupling TC-4; 12) TC-4 Timeline; 13) TC4 Area of Interest; 14) ER-2 TC4 Payload; 15) A/C ready for fuel; 16) ER-2 Pilot being suited; 17) ER-2 Taxing; 18) ER-2 Pilot post flight debrief; and 19) NASA ER-2: Flying Laboratory for Earth Science Studies and Remote Sensing.

Navarro, Robert↗
NASA NTRS2009

Foil Face Seal Testing

In the seal literature you can find many attempts by various researchers to adapt film riding seals to the gas turbine engine. None have been successful, potential distortion of the sealing faces is the primary reason. There is a film riding device that does accommodate distortion and is in service in aircraft applications, namely the foil bearing. More specifically a foil thrust bearing. These are not intended to be seals, and they do not accommodate large axial movement between shaft & static structure. By combining the 2 a unique type of face seal has been created. It functions like a normal face seal. The foil thrust bearing replaces the normal primary sealing surface. The compliance of the foil bearing allows the foils to track distortion of the mating seal ring. The foil seal has several perceived advantages over existing hydrodynamic designs, enumerated in the chart. Materials and design methodology needed for this application already exist. Also the load capacity requirements for the foil bearing are low since it only needs to support itself and overcome friction forces at the antirotation keys.

Munson, John↗
NASA NTRSDate not supplied

NASA's New Wildland Fire Earth Observation Science & Applications Programmatic Developments

In 2021, the U.S. National Aeronautics & Space Administration (NASA) initiated new programmatic elements within the Science Mission Directorate (SMD) and the Aeronautics Research Mission Directorate (ARMD) focused on supporting wildland fire science and applications improvements, employing the vast array of NASA scientific knowledge, airborne and space-borne Earth Observations (EO) capabilities, technology development (sensor systems, etc.), and large framework modeling efforts. Within the Science Mission Directorate, the NASA Earth Science Division (ESD) will focus on improving our understanding of wildland fire through EO tools and applying rigorous-tested modeling and results of that research into operational use. The ESD Wildfire strategy is to invest in new technology and to better integrate NASA’s satellite, airborne, and ground-based observations with wildfire models to provide the wildfire stakeholders with the information they need to make informed decisions about the pre-, active-, and post-fire conditions. The Applied Science Program has restarted the Wildland Fire Applications Program with a focus on engaging wildland fire management and the fire science community in transitioning EO science efforts into routine use by land management entities at the local, state, national and international level. The NASA Aeronautics Research Mission Directorate will focus on arenas where their aeronautics science and engineering outcomes can benefit the fire management community as well, specifically in the innovative development of Uncrewed Aircraft systems, congested mixed-use platform airspace management issues, new platform configurations supporting wildland fire missions, and other aeronautics-related science / engineering capabilities which may benefit the fire management community. In total, these developments represent a major thrust forward, supporting the goals of utilizing NASA science to benefit humankind. This presentation will highlight the various wildland fire science focus areas identified through collaborations with the wildland fire science and management community and highlight the plans of this new NASA focus area.

NASA↗
NASA NTRS2026

Manufacturing Process Development of a Carbon Fiber Reinforced Polymer Composite Shaft for Electric Motors

Electric aircraft applications require electric motors with increased specific power and efficiency. Composite structural components in motors are a potential solution for reducing motor mass, reducing magnetic losses, and limiting undesired conduction paths for fault, electromagnetic interference, or common-mode currents. In this report, manufacturing trials for a high-speed carbon fiber reinforced polymer composite motor shaft are presented. Four prototype shafts were produced using a hybrid biaxial/triaxial fabric that was circumferentially wrapped onto an additively manufactured high-temperature washout mandrel. An additional traditional overbraid approach was also evaluated and shows promise for high-rate, high-performance parts using automated manufacturing. This paper discusses the shaft design, manufacturing methods explored, material selection, the manufacturing trials, and the lessons learned. The results of this manufacturing investigation show feasibility for manufacturing composite shafts for electric motors.

Electric moto shaft↗
NASA NTRS1991

Airframe/propulsion integration at transonic speeds

A significant level of research is ongoing at NASA's Langley Research center on integrating the propulsion system with the aircraft. This program has included nacelle/pylon/wing integration for turbofan transports, propeller/nacelle/wing integration for turboprop transports, and nozzle/afterbody/empennage integration for high-performance aircraft. The studies included in this paper focus more specifically on pylon shaping and nacelle bypass ratio studies for turbofan transports, nacelle and wing contouring, and propeller location effects for turboprop transports, empennage effects, and thrust vectoring for high-performance aircraft. The studies were primarily conducted in NASA Langley's 16-Foot Transonic Tunnel at Mach numbers up to 1.20.

Henderson, W. P.↗