Search NASA⌕ Search

SEARCH · Search NASA

Results for “Allocation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Carbon Intensities of Refining Products in Petroleum Refineries with Co-Processed Biofeedstocks

Petroleum refineries increasingly seek to generate fuels with lower carbon intensities (CIs; a measure of life cycle greenhouse gas [GHG] emissions per unit of energy of fuel; well-to-wheel [WTW]) to meet growing demand. Co-processing refers to a process that adds biomass-derived feedstocks to the fossil-based feedstocks of existing petroleum refinery process units. With the use of biofeedstocks, it is expected that co-processed fuels would have lower CIs than their petroleum counterparts without requiring changes in the existing infrastructure for producing, transporting, and using fuels. To quantify the GHG emissions reduction benefits of co-processing, this study uses a linear programming model to simulate petroleum refinery conditions with and without co-processing. The co-processing cases include three biofeedstocks (soy oil, tallow, and used cooking oil or UCO) used as 10 vol.% of the feedstock to a hydrotreater or hydrocracker since these lipid-based feedstocks have favorable properties to be treated in a hydrotreater or hydrocracker. In addition, we considered pyrolysis oil used as 10 vol.% of the feedstock to a fluid catalytic cracking (FCC) unit in the modeled refinery due to its higher oxygen content compared to other lipid-based feedstocks. Life cycle analysis (LCA) using two distinct approaches—process-level energy allocation and a refinery-level marginal approach—has been conducted for each case. The LCA results using process-level allocation show that there are no noticeable changes in emissions or energy use impacts at the facility level. The life cycle GHG emission reductions of co-processing cases are mainly related to the fraction of biogenic carbon embedded in each fuel product. For example, co-processed jet fuels (a mixture of fossil and biogenic fuels) made via hydrotreating or hydrocracking have higher biogenic carbon, which results in jet fuel CI reductions of 3.9%–8.6% compared to the CI of baseline petroleum jet fuels on a WTW basis. However, analysis of co-processed pyrolysis oil in an FCC shows that a higher fraction of biofeedstocks (29%) becomes process emissions (i.e., CO and CO 2 ), mainly due to the oxygenates in pyrolysis oil, and so it generates less renewable fuel than biofeedstocks co-processed via hydrotreating or hydrocracking. Using the refinery-level marginal approach, the changes in energy use and emissions of co-processing cases compared to the petroleum-only baseline case are allocated to the changes in fuel production (assuming renewable fuels). This approach generates the life cycle GHG emission values of co-processed renewable fuels, which are comparable to the CIs of standalone biofuel production pathways. However, as this approach relies on a rough assumption that product yields and emissions from co-processing units on fossil feedstocks remain the same with and without biofeedstock inputs, co-processing cases like FCC pyrolysis oil may generate quite skewed results.

02 PETROLEUM↗

Laboratory Directed Research and Development Program FY 2020 Annual Summary of Completed Projects

ORNL has established a program with four complementary subprograms to meet its LDRD objectives and to fulfill the particular needs of the laboratory. A provision for multiple routes of access to ORNL LDRD funds maximizes the likelihood that novel ideas with scientific and technological merit will be recognized and supported. The ORNL LDRD Program comprises the following four subprograms: 1) The Director’s R&D Program supports projects that advance research frontiers, capabilities, and expertise at ORNL in key strategic areas. 2) The Seed Program supports innovative high-risk/high-reward research to the proof-of-principle stage. 3) The Strategic Hire Program supports the research of key new staff whose expertise and capabilities address a critical strategic need for the laboratory. 4) The Distinguished Staff Fellowships assist the laboratory in bringing in exceptional early-career scientists to refresh and expand its scientific and technical expertise. The total ORNL LDRD Program budget authorized by DOE for FY 2020 was $\$$55 million. FY 2020 allocations totaled $\$$52.5 million and supported 153 projects. An additional $\$$95,827 was allocated to administrative costs for conducting proposal reviews. Overall, 96.4% of the allocated funds were spent. The expenditure of $\$$50.6 million was about 3.2% of the laboratory’s total budget of $\$$1,572 million for operating and capital expenses, which is well below the maximum of 6% allowed by DOE Order 413.2C and is in accordance with Section 309 of Division D of the Consolidated Appropriations Act.

99 GENERAL AND MISCELLANEOUS↗

Likeness: a toolkit for connecting the social fabric of place to human dynamics

The ability to produce richly-attributed synthetic populations is key for understanding human dynamics, responding to emergencies, and preparing for future events, all while protecting individual privacy. The Likeness toolkit accomplishes these goals with a suite of Python packages: pymedm/pymedm\_legacy, livelike, and actlike. This production process is initialized in pymedm (or pymedm\_legacy) that utilizes census microdata records as the foundation on which disaggregated spatial allocation matrices are built. The next step, performed by livelike, is the generation of a fully autonomous agent population attributed with hundreds of demographic census variables. The agent population synthesized in livelike is then attributed with residential coordinates in actlike based on block assignment and, finally, allocated to an optimal daytime activity location via the street network. We present a case study in Knox County, Tennessee, synthesizing 30 populations of public K–12 school students \& teachers and allocating them to schools. Validation of our results shows they are highly promising by replicating reported school enrollment and teacher capacity with a high degree of fidelity.

Tuccillo, Joe↗

Systems and Photosystems: Cellular Limits of Autotrophic Productivity in Cyanobacteria

Recent advances in the modeling of microbial growth and metabolism have shown that growth rate critically depends upon the optimal allocation of finite proteomic resources among different cellular functions and that modeling growth rates becomes more realistic with the explicit accounting for the costs of macromolecular synthesis, most importantly, protein expression. The “proteomic constraint” is considered together with its application to understanding photosynthetic microbial growth. The central hypothesis is that physical limits of cellular space (and corresponding solvation capacity) in conjunction with cell surface-to-volume ratios represent the underlying constraints on the maximal rate of autotrophic microbial growth. The limitation of cellular space thus constrains the size the total complement of macromolecules, dissolved ions, and metabolites. To a first approximation, the upper limit in the cellular amount of the total proteome is bounded this space limit. This predicts that adaptation to osmotic stress will result in lower maximal growth rates due to decreased cellular concentrations of core metabolic proteins necessary for cell growth owing the accumulation of compatible osmolytes, as surmised previously. The finite capacity of membrane and cytoplasmic space also leads to the hypothesis that the species-specific differences in maximal growth rates likely reflect differences in the allocation of space to niche-specific proteins with the corresponding diminution of space devoted to other functions including proteins of core autotrophic metabolism, which drive cell reproduction. An optimization model for autotrophic microbial growth, the autotrophic replicator model, was developed based upon previous work investigating heterotrophic growth. The present model describes autotrophic growth in terms of the allocation protein resources among core functional groups including the photosynthetic electron transport chain, light-harvesting antennae, and the ribosome groups.

59 BASIC BIOLOGICAL SCIENCES↗

Spacial and objective decompositions for very large SCAPs

This paper considers the single commodity allocation problem (SCAP) for disaster recovery, a fundamental problem faced by all populated areas. SCAPs are complex stochastic optimization problems that combine resource allocation, warehouse routing, and parallel fleet routing. Moreover, these problems must be solved under tight run-time constraints to be practical in real-world disaster situations. This paper revisits the SCAP algorithm proposed in and proposes new storage allocation models that are necessary to enable the algorithm to scale to problem sizes of three orders of magnitude greater (250, 500, 1000 storage locations). The new algorithms are validated on large-scale hurricane disaster scenarios generated by Los Alamos National Laboratory using state-of-the-art disaster simulation tools.

97 MATHEMATICS AND COMPUTING↗

MROrchestrator: A Fine-Grained Resource Orchestration Framework for MapReduce Clusters

Efficient resource management in data centers and clouds running large distributed data processing frameworks like MapReduce is crucial for enhancing the performance of hosted applications and boosting resource utilization. However, existing resource scheduling schemes in Hadoop MapReduce allocate resources at the granularity of fixed-size, static portions of nodes, called slots. In this work, we show that MapReduce jobs have widely varying demands for multiple resources, making the static and fixed-size slot-level resource allocation a poor choice both from the performance and resource utilization standpoints. Furthermore, lack of co-ordination in the management of mul- tiple resources across nodes prevents dynamic slot reconfigura- tion, and leads to resource contention. Motivated by this, we propose MROrchestrator, a MapReduce resource Orchestrator framework, which can dynamically identify resource bottlenecks, and resolve them through fine-grained, co-ordinated, and on- demand resource allocations. We have implemented MROrches- trator on two 24-node native and virtualized Hadoop clusters. Experimental results with a suite of representative MapReduce benchmarks demonstrate up to 38% reduction in job completion times, and up to 25% increase in resource utilization. We further show how popular resource managers like NGM and Mesos when augmented with MROrchestrator can hike up their performance.

99 GENERAL AND MISCELLANEOUS↗

Impacts of Biogas-to-Electricity Purchase Incentive on Electric Vehicle Market Penetration

The biogas-to-electricity pathway under the Renewable Fuel Standards allows for Renewable Identification Number (RIN) credits to be generated when electricity produced from biogas is used in the transportation sector. This study describes and evaluates a potential credit allocation method under that pathway that distributes electricity RIN (E-RIN) credits between electricity generators and plug-in electric vehicle (PEV) users and assesses the impact on EV deployment. In this study, one part of the credit value is allocated to electricity generators to offset potential higher biogas electricity generation cost, measured by the levelized cost of electricity. The other part of credit value is allocated to consumers in terms of the PEV purchase incentive to stimulate PEV sales. An iterative simulation procedure is developed to fulfill two tasks: (1) one task is to estimate the incentive amount based on various factors, such as vehicle mileage, E-RIN equivalence value, and biogas capacity, and (2) the other task is to evaluate potential impacts of the E-RIN program on electrification of the future light duty vehicle fleet and energy use. Results indicate that the E-RIN program can significantly increase PEV market share by up to 2.3 million in sales and by up to 19.7 million in fleet size in 2030. However, effectiveness of the program is subject to different factors, such as the E-RIN equivalence value, biogas electricity generation cost, biogas electricity generation capacity, and potential competition in E-RIN credits by other entities.

Xie, Fei↗

Electrified vehicle DC power conversion with distributed control

An electrified vehicle has a battery pack comprising series-connected battery units providing a main voltage. To supply a lower voltage bus equally from all battery units, a plurality of DC/DC converters are powered by respective units and have their outputs in parallel. A central module has an outer loop controller generating a target current to regulate the bus voltage to a predetermined voltage and has an allocator distributing the target current into a plurality of allocated current commands according to respective states of charge of the battery units. A plurality of local controllers each adjusts a current of a respective DC/DC converter. Each local controller receives a respective allocated current command as a respective feedforward control variable. Each local controller uses an error between the bus voltage and the predetermined voltage to be integrated as a respective feedback control variable only when the error is above a threshold.

33 ADVANCED PROPULSION SYSTEMS↗

Commercial SNF Pickup Queue Under the Standard Contact and Analysis of Hypothetical Alternate Acceptance Strategies

The Standard Contract for Disposal of Spent Nuclear Fuel and/or High-Level Radioactive Waste (Standard Contract) (10 CFR Part 961) establishes the terms and conditions under which the U.S. Department of Energy (DOE) will make available nuclear waste disposal services to the owners and generators of spent nuclear fuel (SNF) and high-level radioactive waste (HLW), as provided in section 302 of the Nuclear Waste Policy Act of 1982 (NWPA) as amended, and by which DOE will take title to, transport, and dispose of SNF and/or HLW delivered to DOE by those owners or generators who execute the contract. The Standard Contract establishes the process for allocating the federal government’s finite waste acceptance capacity among those various owners/generators. This acceptance allocation, also known as the acceptance queue, orders acceptance and transportation priority in accordance with the principle of “oldest fuel first” (OFF). Under the OFF methodology, the oldest SNF, as measured from the date of permanent discharge from the reactor, is given the highest priority in the acceptance queue. While the date of discharge of spent fuel forms the basis of allocations, the owner/generator can send an equivalent Metric Tons of Uranium (MTU) of SNF that the owner/generator owns in its place, as long as it meets the “Standard Fuel” specifications in Appendix E of the Standard Contract. This is a technical paper that does not take into account the contractual limitations under the Standard Contract. This paper also does not specify the party or parties responsible for any costs discussed herein. This paper provides analysis of hypothetical strategies for accepting SNF and no inferences should be drawn from this paper regarding future actions by DOE. To the extent that discussions or recommendations in this paper conflict with the provisions of the Standard Contract, the Standard Contract provisions prevail.

Joseph III, Robby↗

Technique for grouping instructions into independent strands

A device compiler and linker is configured to group instructions into different strands for execution by different threads based on the dependence of those instructions on other, long-latency instructions. A thread may execute a strand that includes long-latency instructions, and then hardware resources previously allocated for the execution of that thread may be de-allocated from the thread and re-allocated to another thread. The other thread may then execute another strand while the long-latency instructions are in flight. With this approach, the other thread is not required to wait for the long-latency instructions to complete before acquiring hardware resources and initiating execution of the other strand, thereby eliminating at least a portion of the time that the other thread would otherwise spend waiting.

Mehrara, Mojtaba↗

Analyzing Next-Generation Supply Chains Using the Materials Flows through Industry Tool

The Materials Flows through Industry (MFI) tool is a supply chain modeling tool developed at the National Renewable Energy Laboratory (NREL) with funding from the Department of Energy's Advanced Manufacturing Office. MFI was created to identify and analyze opportunities to reduce the energy and carbon intensities of the U.S. industrial sector (Hanes and Carpenter 2017). In this work, we present an overview of the MFI tool's structure and capabilities, as well as the results of using MFI to analyze a novel NREL-developed process to 'upcycle' PET plastic into higher-value composite materials (Rorrer et al. 2019). This process combines recycled PET (rPET) plastic with inputs that can be derived from biomass, including muconic acid, acrylic acid, and ethylene glycol, to chemically break down the plastic back to its monomers in a process called glycolization. Then, repolymerization and the application of fiberglass yields the valuable glass fiber reinforced plastic (GFRP) composite, a performance material used in the manufacture of wind turbine blades, boat hulls, and other applications. This rPET-derived GFRP was found to have superior strength and fiberglass adhesion compared to conventional GFRP formulations. Our findings indicate that this GFRP production process, were it to be widely commercialized beyond its current lab-scale, could potentially reduce the fossil energy intensity of the GFRP supply chain by between 37% and 58% compared to the conventional method of GFRP manufacture from fossil-derived inputs. We also estimate potential supply chain greenhouse gas (GHG) emissions reductions between 30% and 40% from this process. Scaling these GHG offset estimates up to annual GFRP production in the U.S. would be roughly equivalent to removing between 150,000 and 200,000 vehicles from U.S. roads. These ranges of impact estimates represent the range of differences associated with the various economic allocation methods we have assumed for the intensity contributions from the first life of the PET plastic. Following Shen et al. (2010), we derive economic allocation factors from the current price ratios of clear- and green-colored recycled PET plastic to virgin PET resin ('waste-valuation' approach) or assume them to be zero in a more simplistic allocation ('cutoff' approach). Future work involving the MFI modeling tool will also be discussed, including preliminary results comparing the energy intensity of conventional and bio-based nylons manufacturing. Attendees will also be encouraged to conduct MFI supply chain modeling of their own by requesting a user account on the MFI web application, which is freely available to the public at the following address: https://mfitool.nrel.gov.

36 MATERIALS SCIENCE↗

Memory object tagged memory monitoring method and system

Described are a method and processing apparatus to tag and track objects related to memory allocation calls. An application or software adds a tag to a memory allocation call to enable object level tracking. An entry is made into an object tracking table, which stores the tag and a variety of statistics related to the object and associated memory devices. The object statistics may be queried by the application to tune power/performance characteristics either by the application making runtime placement decisions, or by off-line code tuning based on a previous run. The application may add a tag to a memory allocation call to specify the type of memory characteristics requested based on the object statistics.

Roberts, David A.↗

Improving the LandScan USA Non-Obligate Population Estimate (NOPE)

Where do people go when they have nowhere to be? Nonobligate activities are a significant part of our social and cultural lives, but there are no existing large scale data which characterize spatial variability in population allocation for these activities. As large scale population estimates have ever-finer resolutions, gaps in our ability to estimate this population segment have an increasingly large impact on high resolution population estimates. In this paper, we demonstrate an improved method for estimating the spatial allocation of the non-obligate population - people who are not at work, school, or in another residential institution. This method builds upon on anonymized and aggregate data on visits to public places, allocating the non-obligate population proportionally to worker population while accounting for the estimated ratio of visitors to workers in public places.

Brelsford, Christa↗

Outage Forecast-Based Preventative Scheduling Model for Distribution System Resilience Enhancement

Distribution system resilience enhancement is an important topic to ensure customers have access to power supply during extreme events. In fact, certain weather-related extreme events can be predicted ahead of time. Therefore, it is important to investigate how to predict grid outages using extreme weather forecasts, and how outage predictions can be incorporated into distribution system resilience enhancement. In this paper, a preventative scheduling model for distribution systems is proposed. The model targets at allocating resources, especially mobile responsive resources such as mobile backup generators and mobile energy storage systems, to prepare for an extreme event in the day-ahead context. To achieve efficient resource allocation and scheduling, a machine learning-based outage prediction module is developed to predict vulnerable or risky segments of the distribution system based on historical operating records and extreme weather event forecast. By integrating the outage prediction results into the scheduling model, optimal resource allocation can be derived to help distribution systems prepare for an upcoming event and improve resilience performance. A real distribution feeder in North Carolina, U.S. is used in the case study to validate the proposed approach.

distributed energy resources↗

Radiological Recovery Logistics Tool - 20161

Argonne is building and testing a tool, the Radiological Recovery Logistics Tool (RRLT), that can be used during the response and recovery from a radiological or nuclear incident to effectively allocate appropriate commercial and public works equipment to mitigate, remove, and contain radiological contamination. The requirements for this tool - as well as development of the resulting software - is overseen by a steering committee of stakeholders from DHS's National Urban Security Technology Laboratory (NUSTL), the Federal Emergency Management Agency (FEMA), and the Environmental Protection Agency (EPA). One essential requirement is for RRLT to support the efficient and appropriate allocation of resources for a radiological response. Subsequent discussions between ANL and stakeholders have solidified the nature of this support to include identification of the types of resources to be allocated. The study reported in this paper has both factored fundamental concepts and connections out of this identification process and created a Knowledge Base detailing support goals, response scenarios, and efficacy information on dozens of equipment types. In short, RRLT will dynamically apply these findings to situational conditions surrounding contamination incidents. RRLT's Domain, the model of elements, ideas and relationships with which the tool will work, draws concepts from technical reports and stakeholder vocabularies to connect response goals and scenarios to types of equipment that offer utility towards those goals in those scenarios. RRLT's Knowledge Base will contain details on dozens of equipment types and facilitate the operator's discovery and consumption of these details most pertinent to a dynamically selected subset of goals. The core of its Domain Model is based on a report authored by this team. This report [1] contains a comprehensive list of proposed equipment to accomplish various missions or scenarios that might arise after a large-scale radiological contamination incident in an urban environment or critical infrastructure. The report divides potential response and recovery efforts into five support goals: Survey and monitoring of the contaminated area; Mitigation of received dose to first responders: Decontamination (gross and final) of buildings, vehicles, roadways, parks, and other surfaces: Waste management of solid waste generated during recovery operations: and Containment of wastewater and other waste generated during the response and recovery phases. RRLT's development is driven by use cases. A use case is an intention with which a user approaches the software. Use cases are grouped into delivery increments to schedule development, testing, and presentation to stakeholders. This model partitions the system into seven increments: User Arrival and Authentication, Search and Navigation, Equipment Recommendation, Plan Management, Content Management, and Expanded Access. Once a user 15 authenticated, RRLT will present the user with a dashboard that allows them to explore or search RRLT's content. The dashboard will also include a 'Plan' panel for collecting decisions and relevant observations about an incident at hand to facilitate development of an equipment list. RRLT will offer three general modes of access to items in the knowledge base: - Keyword search for direct discovery of items, - Navigation along predetermined paths from recovery goal towards equipment types, and - Interactive guidance towards equipment types by an autonomous software agent: the Equipment Recommendation Wizard. This presentation will detail progress in the development of the RRLT and also discuss opportunities for those interested in providing feedback on its content and functionality. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Sampling Size Optimization for Bioburden Density Estimation in Planetary Protection

Planetary protection (PP) is a discipline that focuses on minimizing the biological contamination of spacecraft to ensure compliance with international policy. Precise estimation of bioburden - the total number of microbes in or on spacecraft hardware – and the bioburden density are of utmost importance for PP. Such estimation is the way concordance with requirements is demonstrated, and it is critical for quantifying the potential risk of inadvertently contaminating other planetary bodies. Although a suite of molecular techniques have been used to thoroughly characterize and profile the microbiome of various cleanroom environments and spacecraft, the gold standard remains the physical enumeration of microbes via culturing of samples directly taken from spacecraft and associated surfaces. However, due to technical, budgetary, and programmatic constraints, only a manageable portion (around 10%) of the entire spacecraft surface is directly sampled with cotton swabs or wipes. To generate the bioburden current best estimate (CBE) for components not directly verifiable, the accepted approach is to apply a NASA-defined bioburden estimate based on the components’ manufacturing or assembly environment. This approach utilizes a prespecified bioburden density estimation that applies a maximum value across the total surface area of the specified component. For hardware components that underwent similar assembly processes, an implied bioburden is adopted for all components, based on a direct verification of a representative component within the same lot. Once all components have a CBE, the bioburden estimates are generated. In previous publication [ 1], we have shown that statistical risks quantifying the accuracy of the estimates for sampled, prespecified, and implied components can be derived and ranked. For mean squared error (MSE) function, the risks are available analytically and hence a cost function can be obtained to optimize the risks with respect to the sampling area and sampling cost. Since the sampling area and sampling cost are two complimentary variables, their sum will have a well-defined minimum. This paper presents the multivariate optimization of the integrated risk of an empirical Bayes estimator to determine the optimal sampling schedule for a given number of components. It is assumed that given a number of components, N, the bioburden density for each component can either be sampled, implied, or prespecified. The multivariate optimization searches through different options to sample, imply or prespecify the bioburden density for a component, and account for the component’s surface area and cost of sampling. The idea of the optimization is based on the observation that the statistical risk of using an estimator is a monotonically decreasing function of the sampled area. The larger the sampled area, the lower the risk of using the estimator as the estimator becomes more and more accurate as the sampling area increases. On the other hand, the cost of sampling is monotonically increasing as the sampled surface grows. This makes the risk and total cost of sampling complimentary variables which can be counterbalanced to achieve an optimal overall value with respect to the sampled surface. In this paper, the integrated risk has been used to quantify the accuracy of the estimator. This risk has been selected because it depends on neither the true value of the parameter nor on the collected data. The cost of each sample was also available to obtain the total cost of sampling of N components. The paper will present the results based on computer-simulated data as well as the data collected during the InSight mission. The computer-simulated data have N components with randomly generated total areas and each component assigned to one of the three categories according to the method of estimating of bioburden density: sampled, implied, or prespecified. The cost of sampling is also available. The cost of sampling is estimated based on a cost model provided by the planetary protection group at JPL. For this paper, the overall cost was assumed to be a linear function of exposure. The optimization process finds the allocation of the components to the three categories that minimizes the tradeoff between integrated risk and total cost. For the InSight data, a set of components is selected representing all three categories, and optimization is performed to determine if the performed allocation was optimal or if a better allocation could have been obtained. To the best of our knowledge, this work is the first attempt not only perform an accurate estimation of bioburden density but also do it in an optimal way.

97 - MATHEMATICS AND COMPUTING↗

Resource allocatiion: sequential data collection for reliability analysis involving systems and component level data

In analyzing the reliability of complex systems, several types of data from full-system tests to component level tests are commonly available and are used. After a preliminary analysis, additional resources may be available to collect new data. The goal of resource allocation is to identify the best new data to collect to maximally improve the prediction of system reliability. While several possible definitions of 'maximally improve' are possible, we focus on reducing the uncertainty or the width of the uncertainty interval for the prediction of system reliability at a user-specified age(s). In this paper, we present an algorithm that allows us to estimate the anticipated improvement to the analysis with the addition of new data, based on current understanding of all of the statistical model parameters. This quantitative assessment of the anticipated improvement can be helpful to justify the benefits of collecting new data. Additionally by comparing different potential allocations, it is possible to determine what new data should be collected to improve our understanding of the response. This optimization takes into account the relative cost of different data types and can be based on flexible allocation options, or subject to logistical constraints.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Tonoplast Sucrose Transporter SUT4-Dependent Sugar Partitioning Modulates Phenological Transitions and Reproductive Success in Poplar

Climate uncertainty is intensifying the need for greater plasticity in carbohydrate reserve utilization to support winter survival and spring growth in woody perennials. In poplar, the single-copy SUT4, which encodes a tonoplast-localized sucrose transporter, and the SUT5/SUT6 genome duplicates, which encode plasma membrane-localized transporters, are expressed year-round, with SUT4 showing the highest expression during cool seasons. Given its role in vacuolar sucrose efflux and winter-predominant expression, SUT4 may play a key role in modulating seasonal carbohydrate dynamics. While SUT4-knockdown and knockout effects have been studied under greenhouse conditions, their impact under field conditions remains unexplored. Here, we report a field-based study comparing CRISPR knockout mutants of winter-expressed SUT4 and SUT5/SUT6 in Populus tremula x alba. We show that sut4, but not sut5/6, mutants exhibited earlier autumn leaf senescence, delayed spring bud flush, reduced stem growth, and altered sugar partitioning in winter xylem and bark relative to controls. After 2 years in the field, all genotypes flowered before leaf flush in early spring; however, sut4 mutants produced sterile ovules despite developing normal-looking catkins. Metabolic profiling revealed disrupted sucrose and raffinose dynamics in elongating sut4 catkins. This was accompanied by transcriptomic signatures of elevated stress and downregulation of proanthocyanidin biosynthesis and circadian clock genes. These findings highlight the critical role of SUT4 in coordinating sugar allocation, stress responses, and seasonal development in poplar.

09 BIOMASS FUELS↗