Search NASA⌕ Search

SEARCH · Search NASA

Results for “Argon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

A 400 kilowatt argon arc lamp for solar simulation

A 400 kilowatt argon arc lamp for a solar simulator has been designed, operated, and evaluated. The lamp is designed to produce one solar constant on a test area 4.6 by 9.2 meters when used with a collimator. The divergence angle of the beam is about 1 deg. The lamp is designed to operate completely within a vacuum environment. Over 80 kilowatt of directed radiation was monitored and measured for a 25-hour period during a recent test. In another test, an arc was operated at 400 kilowatt for 110 hours without removal or refurbishing of the electrodes. These tests have proven the cleanliness and integrity of the radiation source.

Decker, A. J.↗

Measurements of seeded argon-hydrogen plasma properties.

Seeded argon-hydrogen plasmas have been produced at Georgia Tech in order to experimentally measure composition, temperature, radiant heat output and opacity. The plasma, seeded with submicron tungsten particles, simulates the propellant of a gaseous core nuclear rocket. These measurements are needed to predict the dynamic behavior of the operating gas core reactor. The temperature range in which the seed has vaporized but the hydrogen itself has not yet become opaque is known as the seed-hydrogen opacity window. Preliminary opacity data in this temperature range will be presented.

Benns, R. A.↗

Overlap of argon ion spectra with satellites to the Lyman-alpha lines of carbon and boron.

A theta pinch has been employed to investigate satellites to the H-like and He-like ion resonance lines of boron and carbon. Identification of the spectra shows an overlap of the Ar IX, Ar XI, and Ar XII lines with the predicted satellite wavelengths, and it is concluded that many of the previously reported satellite lines are due to argon impurities.

Jalufka, N. W.↗

Rubidium-strontium and potassium-argon age of lunar sample 15555.

The lunar mare basalt 15555 from the edge of Hadley Rille has been dated at 3.3 b.y. by both rubidium-strontium and potassium-argon techniques. Age and trace element abundances closely resemble those of the Apollo 12 mare basalts. Data from lunar basalts obtained thus far indicate that they cannot be derived by simple fractionation from a homogeneous source.

Murthy, V. R.↗

Frequency stabilization of a high power argon laser.

A technique for frequency stabilizing a high power, single frequency argon laser is described which offers certain advantages over those that have already been reported. This system is capable of maintaining a relative short term frequency stability of the order of plus or minus two parts in one billion and a long term stability (2 hr) of about plus or minus five parts in one billion for the 5145-A line at a power level of 750 mW. This short and long term stability is achieved by means of a multiple feedback loop composed of an optical cavity discriminator which is stabilized against an iodine vapor absorption line.

Hohimer, J. P.↗

Photoionization cross-sections for atoms and ions of aluminum, silicon, and argon.

Photoionization cross sections for all levels belonging to the configurations of atoms and ions of aluminum, silicon, and argon have been calculated using Hartree-Fock bound-electron wave functions and close-coupling approximation free-electron wave functions. The results are presented in the form of a computationally convenient interpolation formula and should find wide astrophysical application.

Chapman, R. D.↗

Isoelectronic wavelength calculations for argon spectra /Research note/.

A recent comprehensive set of isoelectronic calculations based on the data of Kelly (1968) has yielded two argon wavelengths that correspond with two of the unidentified wavelengths reported by Connerade et al. (1971) and a third wavelength which supports an uncertain identification. The observed and the interpolated wavelengths are presented in a table together with their identifications, and information concerning the interpolations.

Williams, M. D.↗

Magnetogasdynamic heat transfer to a hemispherical body in a supersonic argon plasma.

Measurements of the heat transfer to a hemispherical body in a Mach 4.6, low density, argon plasma are reported. The experiments demonstrated that local wall currents affected the heat flux to the electrically conducting surface, both without and with internally applied magnetic fields. Such currents were induced by a nonuniform shock-layer plasma potential; but with applied fields, Hall currents dominated. Magnetic fields significantly increased the stagnation-region heat flux while causing a reduction over the remainder of the hemisphere. For an electrically nonconducting surface, the local heat flux was reduced, and magnetic fields insignificantly affected the heat flux. Analytical treatments indicate that joule and radiation heating were negligible.

Nowak, R. J.↗

Dissociation rate of bromine diatomics in an argon heat bath

The evolution of a collection of 300 K bromine diatomics embedded in a heat bath of argon atoms at 1800 K was studied by computer, and a dissociation-rate constant for the reaction Br2 + BR + Ar yields Br + Ar was determined. Previously published probability distributions for energy and angular momentum transfers in classical three-dimensional Br2-Ar collisions were used in conjunction with a newly developed Monte Carlo scheme for this purpose. Results are compared with experimental shock-tube data and the predictions of several other theoretical models. A departure from equilibrium is obtained which is significantly greater than that predicted by any of these other theories.

Razner, R.↗

Hypoxia, gas narcosis, and metabolic response to argon and nitrous oxide

Studies of the mechanism of inert gas influence on metabolism are reported. The studies reported include: metabolic response of hamsters to argon and nitrous oxide, membrane fatty acids and susceptability to narcotic gas influence, narcosis-induced histotoxic hypoxia, biochemical study of inert gas narcosis, hypoxia-induced protection against cardiovascular deterioration in the weightless state, and acute metabolic and physiologic response of goats to narcosis.

Source record↗

High temperature, low cycle fatigue of copper-base alloys in argon. Part 3: Zirconium-copper; thermal-mechanical strain cycling, hold-time and notch fatigue results

The low-cycle fatigue characteristics of smooth bar and notched bar specimens (hourglass shape) of zirconium-copper, 1/2 Hard, material (R-2 Series) were evaluated at room temperature in axial strain control. Over the fatigue life range from about 300 to 3000 cycles the ratio of fatigue life for smooth bar to fatigue life for notched bar remained constant at a value of about 6.0. Some additional hold-time data for the R-2 alloy tested in argon at 538 C are reported. An analysis of the relaxation data obtained in these hold-time tests is also reported and it is shown that these data yield a fairly consistent correlation in terms of instantaneous stress rate divided by instantaneous stress. Two thermal-mechanical strain cycling tests were also performed using a cyclic frequency of 4.5 cycles per hour and a temperature cycling interval from 260 to 538 C. The fatigue life values in these tests were noticeably lower than that observed in isothermal tests at 538 C.

Conway, J. B.↗

Argon charge states due to impact of H+ and He+ ions

Charge states of argon produced by bombardment with 100-keV to 1-MeV H+ and He+ projectiles were studied by examining high-resolution L-shell X-ray satellite spectra. Large differences appear in charge-state populations determined from X-ray data and Auger-electron data.-

Oona, H.↗

Excitation of metastable argon and helium atoms by electron impact

Using a time-of-flight method, the excitation of argon and helium metastables by electron impact is investigated in the energy range from threshold to about 50 eV. The secondary-electron yields of the metastable detector used are reviewed in detail. The effect of metastable recoil is also discussed. Comparisons with data from other investigators are presented.

Borst, W. L.↗

Virial expansion of the second layer in physical adsorption - An ab initio calculation for helium on argon crystal

A model of helium adsorption on an argon crystal is built up from the premise that local adsorption predominates in the first layer and nonlocal adsorption in the second. Application of the virial expansion theorem to the second layer gives a series in which the first term represents the motion of a single molecule in the external potential field and the second a two-body interaction under this field. The thermodynamic functions of the adsorbed phase are calculated ab initio, the gas-solid interaction potential being derived from lattice summation and the partition function from an appropriate choice of a site-spacing polynomial to describe the periodic potential. The mutual interaction of adsorbed molecules is calculated with a two-dimensional Lennard-Jones potential. The second virial coefficient is calculated and its dependence on temperature and choice of potential is studied. It is found that the second virial coefficient is very well approximated by a two-dimensional gas in free space. The adsorption isotherm, isosteric heat, and specific heat are obtained and compared with the results of Ross and Steele, giving excellent agreement.

Oh, B. K.↗

Electrical characteristics of a free-burning direct-current argon arc operating between 90 and 563 kilowatts with two types of cathodes

The electrical characteristics of a high-power, long-lived, free-burning dc argon arc are presented. Empirical formulas relating voltage to current, electrode separation, and operating pressure are given for two types of cathodes: a typical point tip cathode and a cathode with a 1.27-cm-(0.5-in.-) diameter crater in the tip. Power was varied from 90 to 563 kW. A discussion of the cathode with the crater tip is given.

Curtis, H. B.↗

Vibrational spectrum of CO2/-/ in an argon matrix

Ar:CO:N2O samples of mole ratio 250:1:1 and 500:1:1 were codeposited at 14 K with an atomic beam of sodium or potassium. The infrared spectrum of the resulting deposit was basically identical to that for CO and N2O isolated in an argon matrix in the absence of alkali metal atoms. Spectral absorption features were studied of Ar:CO2 samples of mole ratio ranging from 250 to 500 codeposited with an atomic beam of potassium. Ar:CO2 samples with a mole ratio in the range from 250 to 1000, which had been codeposited with an atomic beam of cesium, were also investigated.

Jacox, M. E.↗

Plasma core reactor simulations using RF uranium seeded argon discharges

An experimental investigation was conducted using the United Technologies Research Center (UTRC) 80 kW and 1.2 MW RF induction heater systems to aid in developing the technology necessary for designing a self-critical fissioning uranium plasma core reactor (PCR). A nonfissioning, steady-state RF-heated argon plasma seeded with pure uranium hexafluoride (UF6) was used. An overall objective was to achieve maximum confinement of uranium vapor within the plasma while simultaneously minimizing the uranium compound wall deposition. Exploratory tests were conducted using the 80 kW RF induction heater with the test chamber at approximately atmospheric pressure and discharge power levels on the order of 10 kW. Four different test chamber flow configurations were tested to permit selection of the configuration offering the best confinement characteristics for subsequent tests at higher pressure and power in the 1.2 MW RF induction heater facility.

Roman, W. C.↗