Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Effect of Cu doping on Hole Mobility in CdTe

High quality CdTe thin films grown by laser deposition technique and heavily doped with Cu have recently been reported to have resistivity and hole mobility comparable to those of bulk single crystals. To explain the experimental results we have calculated the effect of Cu on the band structure and phonon spectrum of CdTe using the density functional theory (DFT) and the linearized augmented plane wave (LAPW) method. We found that the introduction of a high density of Cu can lead to a reduction in the hole-LO phonon scattering. In addition, Cu doping can remove Cd vacancies in CdTe and thereby enhance the hole mobility in CdTe.

36 MATERIALS SCIENCE↗

Tensile-strain and doping enhanced direct bandgap optical transition of n{sup +} doped Ge/GeSi quantum wells

Band structures of tensile strained and n{sup +} doped Ge/GeSi quantum wells (QWs) are calculated by multiple-band k·p method. The energy dispersion curves of the Γ and L conduction subbands are obtained. The effects of tensile strain and n{sup +} doping in Ge on direct bandgap optical gain and spontaneous radiative recombination rate spectra are investigated including the electron leakage from Γ to L conduction subbands. Our results show that the optical gain and spontaneous radiative recombination rate can be significantly increased with the tensile strain, n-type doping concentration, and injection carrier density in the Ge QW. The free carrier absorption is calculated and cannot be ignored because of the heavily doped Ge. The pure TM mode polarized net optical gain up to 1153 cm{sup −1} can be achieved for the Ge/Ge{sub 0.986}Si{sub 0.014} QW with tensile strain of 1.61% and n-type doping concentration of 30 × 10{sup 18} cm{sup −3}.

36 MATERIALS SCIENCE↗

Ab initio calculations of the rate of carrier trapping and release at dopant sites in NaI: Tl beyond the harmonic approximation

We present ab initio calculations of electron capture and release coefficients as a function of temperature for Tl dopants in the widely used scintillator NaI, which is a soft ionic crystal. The modelled capture and release events occur by transitions mediated by multiple phonon absorption and emission between states with significantly different local geometries around the trapping site. We demonstrate that such transitions are not well-described by the normal harmonic approximation to the nuclear dynamics. We avoid the harmonic approximation by numerically solving the vibrational Schrödinger equation for the motion along/of a single effective phonon coordinate. The localized trapped state is not correctly described by semilocal density functionals, so we employ a hybrid functional tuned to reproduce the band gap and lattice constant of the host material. Our calculations, which combine plane-wave and cluster electronic structure methods in a novel way, are in reasonable agreement with available experimental data for detrapping and predict an unusual temperature dependence for trapping rates.

Prange, Micah P.↗

IR spectra of carbon-vacancy clusters in the topochemical transformation of silicon into silicon carbide

Using infrared (IR) spectroscopy and spectral ellipsometry, we experimentally confirmed the previously predicted mechanochemical effect of the stoichiometric composition disorder leading to the formation of carbon-vacancy structures in silicon carbide (SiC) films grown on silicon substrates by the atom substitution method. It was found that a band at 960 cm{sup –1} in the IR spectra of SiC films on silicon, corresponding to “carbon-vacancy clusters” is always present in SiC films grown under pure carbon monoxide (CO) or in a mixture of CO with silane (SiH{sub 4}) on Si substrates of different orientation and doping level and type. There is no absorption band in the region of 960 cm–1 in the IR spectra of SiC films synthesized at the optimum ratio of the CO and trichlorosilane (SiHCl{sub 3}) gas pressures. The previously predicted mechanism of the chemical reaction of substitution of Si atoms for carbon by the interaction of gases CO and SiHCl{sub 3} on the surface of the silicon substrate, which leads to the formation of epitaxial layers of single-crystal SiC, is experimentally confirmed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical Properties of Multilayer BaTiO{sub 3}/SiO{sub 2} Film Structures Formed by the Sol–Gel Method

Multi-layer film structures BaTiO{sub 3}/SiO{sub 2} with a thickness of ~1 μm containing up to 14 pairs of layers were synthesized by the sol–gel method with sequential heat treatment. It is shown that the synthesized structures are X-ray amorphous. The formation of bands in the transmission and reflection spectra caused by interference effects is demonstrated. A more regular structure exhibits a photon band gap (opacity band) in the visible range with main minimum at 636 nm and corresponding maximum in the reflection spectra. Dispersion characteristics of barium titanate films with different concentrations of initial sols were studied and an increase in the refractive index with an increase in the concentration of sol was demonstrated. For a sol with a concentration of 60 mg/mL, the refractive index in the spectral range of 390–1600 nm is 1.88–1.81. The prospects of sol–gel technology for the formation of BaTiO{sub 3}/SiO{sub 2} structures for nanophotonics and solar radiation converters are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecule@MOF: A New Class of Opto-electronic Materials.

Metal organic frameworks (MOFs) are extended, nanoporous crystalline compounds consisting of metal ions interconnected by organic ligands. Their synthetic versatility suggest a disruptive class of opto - electronic materials with a high degree of electrical tunability and without the property - degrading disorder of organic conductors. In this project we determined the factors controlling charge and energy transport in MOFs and evaluated their potential for thermoelectric energy conversion. Two strategies for a chieving electronic conductivity in MOFs were explored: 1) using redox active 'guest' molecules introduced into the pores to dope the framework via charge - transfer coupling (Guest@MOF), 2) metal organic graphene analogs (MOGs) with dispersive band structur es arising from strong electronic overlap between the MOG metal ions and its coordinating linker groups. Inkjet deposition methods were developed to facilitate integration of the guest@MOF and MOG materials into practical devices.

36 MATERIALS SCIENCE↗

Electronic structure of mononuclear Cu-based molecule from density-functional theory with self-interaction correction

In this paper, we investigate the electronic structure of a planar mononuclear Cu-based molecule [Cu(C 6 H 4 S 2 ) 2 ] z in two oxidation states ( z = –2, –1) using density-functional theory (DFT) with Fermi–Löwdin orbital (FLO) self-interaction correction (SIC). The dianionic Cu-based molecule was proposed to be a promising qubit candidate. Self-interaction error within approximate DFT functionals renders severe delocalization of electron and spin densities arising from 3 d orbitals. The FLO-SIC method relies on optimization of Fermi–Löwdin orbital descriptors (FODs) with which localized occupied orbitals are constructed to create SIC potentials. Starting with many initial sets of FODs, we employ a frozen-density loop algorithm within the FLO-SIC method to study the Cu-based molecule. We find that the electronic structure of the molecule remains unchanged despite somewhat different final FOD configurations. In the dianionic state (spin S = 1/2), FLO-SIC spin density originates from the Cu d and S p orbitals with an approximate ratio of 2:1, in quantitative agreement with multireference calculations, while in the case of SIC-free DFT, the orbital ratio is reversed. Overall, FLO-SIC lowers the energies of the occupied orbitals and, in particular, the 3 d orbitals unhybridized with the ligands significantly, which substantially increases the energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) compared to SIC-free DFT results. The FLO-SIC HOMO–LUMO gap of the dianionic state is larger than that of the monoanionic state, which is consistent with experiment. Our results suggest a positive outlook of the FLO-SIC method in the description of magnetic exchange coupling within 3 d -element-based systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Na substitution on electronic and optical properties of CuInS{sub 2} chalcopyrite semiconductor

Electronic & optical properties of Na substituted CuNaIn{sub 2}S{sub 4} chalcopyrite semiconductors are significantly modified due to Na substitution in the Cu deficient CuInS{sub 2} semiconductor. These properties are obtained form first principle calculation using density functional theory based tight binding Linear muffin tin orbital method. The presence of Na alters the structural distortion and enhances strengths of Cu d and S p hybridization in CuNaIn{sub 2}S{sub 4}. This effect reduces band gap, in agreement with experimental observations and modify other properties significantly. Calculations of optical matrix elements (OME) and joint density of states (JDOS) show that effects of Na substitution on optical properties come through p–d hybridization and structural distortion. OME contribution is prominent near band edge. Both systems show anisotropic optical properties. - Graphical abstract: The figure shows the band structure and total density of states of CuNaIn{sub 2}S{sub 4}. It illustrates energy bands at various symmetry points, band gap and contribution of various orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quasiparticle electronic structure of bismuth telluride in the GW approximation

The quasiparticle band structure of bismuth telluride Bi2Te3 , an important thermoelectric material that exhibits topologically insulating surface states, is calculated from first principles in the GW approximation. The quasiparticle energies are evaluated in fine detail in the first Brillouin zone using a Wannier-function interpo- lation method, allowing the accurate determination of the location of the band extrema which is in the mirror plane as well as the values of the quasiparticle band gap 0.17 eV and effective-mass tensors. Spin-orbit interaction effects were included. The valence band exhibits two distinct maxima in the mirror plane that differ by just 1 meV, giving rise to one direct and one indirect band gap of very similar magnitude. The effective- mass tensors are in reasonable agreement with experiment. The Wannier interpolation coefficients can be used for the tight-binding parametrization of the band structure. Our work elucidates the electronic structure of Bi2Te3 and sheds light on its exceptional thermoelectric and topologically insulating properties.

36 MATERIALS SCIENCE↗

Boric acid flux synthesis, structure and magnetic property of MB₁₂O₁₄(OH)₁₀ (M=Mn, Fe, Zn)

Three new borates MB₁₂O₁₄(OH)₁₀ (M=Mn, Fe, Zn) have been synthesized by boric acid flux methods, which are isotypic to NiB₁₂O₁₄(OH)₁₀. Single-crystal XRD was performed to determine the crystal structures in detail. They all crystallize in the monoclinic space group P2₁/c. The size of MO{sub 6} (M=Mg, Mn, Fe, Co, Ni, Zn) octahedron shows a good agreement with the Shannon effective ionic radii of M²⁺. Magnetic measurements indicate MnB₁₂O₁₄(OH)₁₀ is antiferromagnetic without a long-range ordering down to 2 K. The values of its magnetic superexchange constants were evaluated by DFT calculations, which explain the observed magnetic behavior. The UV–vis diffuse reflectance spectrum of ZnB₁₂O₁₄(OH)₁₀ suggests a band gap ~4.6 eV. DFT calculations indicate it has a direct band gap 4.9 eV. The optical band gap is contributed by charge transfers from the occupied O 2p to the unoccupied Zn 4s states. - Graphical abstract: Experimental and theoretical studies indicate MnB₁₂O₁₄(OH)₁₀ is antiferromagnetic without a long-range ordering. DFT calculations show ZnB₁₂O₁₄(OH)₁₀ has a direct band gap of 4.9 eV. Highlights: • MB₁₂O₁₄(OH)₁₀ (M=Mn, Fe, Zn) are synthesized by two-step boric acid flux method. • Single-crystal XRD was performed to determine the crystal structures in detail. • Size of MO₆ (M=Mg, Mn, Fe, Co, Ni, Zn) agrees with the effective ionic radii. • MnB₁₂O₁₄(OH)₁₀ is antiferromagnetic without a long-range ordering down to 2 K. • DFT calculations indicate ZnB₁₂O₁₄(OH)₁₀ has a direct band gap 4.9 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and structural properties of A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) chalcopyrite semiconductors

We have studied the structural and electronic properties of defect chalcopyrite semiconductors A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) using density functional theory (DFT) based first principle technique within tight binding linear muffin-tin orbital (TB-LMTO) method. Our calculated structural parameters such as lattice constants a and c, tetragonal distortion ({eta}=c/2a) are in good agreement with experimental work. Anion displacement parameters, bond lengths and bulk modulus are also calculated. Our band structure calculation suggests that these compounds are direct band gap semiconductors having band gaps 2.40, 2.50, 2.46 and 2.82 eV for A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) respectively. Calculated band gaps are in good agreement with other experimental and theoretical works within LDA limitation. We have made a quantitative estimation of the effect of p-d hybridization and structural distortion on the electronic properties. The reduction in band gap due to p-d hybridization is 19.47%, 21.29%, 0% and 0.7% for A Al{sub 2}Se{sub 4} (A=Ag, Cu, Cd, Zn) respectively. Increment of the band gap due to structural distortion is 11.62%, 2.45%, 2.92% and 9.30% in case of AgAl{sub 2}Se{sub 4}, CuAl{sub 2}Se{sub 4}, CdAl{sub 2}Se{sub 4} and ZnAl{sub 2}Se{sub 4} respectively. We have also discussed the bond nature of all four compounds. - Graphical abstract: Band structure and TDOS show the band gaps and effect of structural distortion on electronic properties. PDOS shows effect of p-d hybridization on band gaps for all four compounds. Highlights: > (Ag/Cu/Cd/Zn)Al{sub 2} Se{sub 4} have direct band gap of 2.4, 2.5, 2.46 and 2.82 eV respectively. > p-d hybridization reduces band gaps by 19.5%, 21.3% for (Ag/Cu)Al{sub 2}Se{sub 4} respectively. > No effects of? p-d hybridization on the band gaps for (Cd/Zn)Al{sub 2}Se{sub 4} and ZnAl{sub 2}Se{sub 4}. > Significant enhancement in band gap due to structural distortion in all the compounds. > Effects of bond nature on band gaps are also studied in all the compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the nature of the Mn-related states in the band structure of (Ga,Mn)As alloys via probing the E{sub 1} and E{sub 1} + Δ{sub 1} optical transitions

The dilute (Ga,Mn)As became a model ferromagnetic semiconductor, however there is still a disagreement on the source of its magnetism. In this paper, we verify the ellipsometric results and compare them with more precise photoreflectance method, which gives an important insight into the interaction of the Mn-related states with the ones of GaAs valence band. No spectral shifts observed for the E{sub 1} and E{sub 1} + Δ{sub 1} interband transitions in highly doped and annealed (Ga,Mn)As epitaxial layers indicate that the coupling between a detached Mn impurity band and the valence band does not occur. Our findings are supported by the characterizations of the (Ga,Mn)As epitaxial layers with the high resolution transmission electron microscopy and magnetization measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect induced structural inhomogeneity, ultraviolet light emission and near-band-edge photoluminescence broadening in degenerate In 2 O 3 nanowires

We demonstrate here defect induced changes on the morphology and surface properties of indium oxide (In 2 O 3 ) nanowires and further study their effects on the near-band-edge (NBE) emission, thereby showing the significant influence of surface states on In 2 O 3 nanostructure based device characteristics for potential optoelectronic applications. In 2 O 3 nanowires with cubic crystal structure (c-In 2 O 3 ) were synthesized via carbothermal reduction technique using a gold-catalyst-assisted vapor–liquid–solid method. Onset of strong optical absorption could be observed at energies greater than 3.5 eV consistent with highly n-type characteristics due to unintentional doping from oxygen vacancy ( V O ) defects as confirmed using Raman spectroscopy. A combination of high resolution transmission electron microscopy, x-ray photoelectron spectroscopy and valence band analysis on the nanowire morphology and stoichiometry reveals presence of high-density of VO defects on the surface of the nanowires. As a result, chemisorbed oxygen species can be observed leading to upward band bending at the surface which corresponds to a smaller valence band offset of 2.15 eV. Temperature dependent photoluminescence (PL) spectroscopy was used to study the nature of the defect states and the influence of the surface states on the electronic band structure and NBE emission has been discussed. Lastly, our data reveals significant broadening of the NBE PL peak consistent with impurity band broadening leading to band-tailing effect from heavy doping.

36 MATERIALS SCIENCE↗

Single-Band and Dual-Band Infrared Detectors

Bias-switchable dual-band infrared detectors and methods of manufacturing such detectors are provided. The infrared detectors are based on a back-to-back heterojunction diode design, where the detector structure consists of, sequentially, a top contact layer, a unipolar hole barrier layer, an absorber layer, a unipolar electron barrier, a second absorber, a second unipolar hole barrier, and a bottom contact layer. In addition, by substantially reducing the width of one of the absorber layers, a single-band infrared detector can also be formed.

Ting, David Z.↗

Single-Band and Dual-Band Infrared Detectors

Bias-switchable dual-band infrared detectors and methods of manufacturing such detectors are provided. The infrared detectors are based on a back-to-back heterojunction diode design, where the detector structure consists of, sequentially, a top contact layer, a unipolar hole barrier layer, an absorber layer, a unipolar electron barrier, a second absorber, a second unipolar hole barrier, and a bottom contact layer. In addition, by substantially reducing the width of one of the absorber layers, a single-band infrared detector can also be formed.

Ting, David Z.↗

Structural transformation from Mn{sub 3}O{sub 4} nanorods to nanoparticles and band gap tuning via Zn doping

Highlights: Black-Right-Pointing-Pointer Successful doping of Zn in Mn{sub 3}O{sub 4} nanorod has been done by simple hydrothermal method. Black-Right-Pointing-Pointer Increase of Zn doping encouraged the formation of Mn{sub 3}O{sub 4} nanoparticle out of Mn{sub 3}O{sub 4} nanorod. Black-Right-Pointing-Pointer The energy band gap of Mn{sub 3}O{sub 4} nanorod increased continuously with the increase of Zn doping concentration. -- Abstract: Synthesis of undoped and Zn doped hausmannite Mn{sub 3}O{sub 4} nanorods was achieved through a simple hydrothermal route. Scanning electron microscopic studies showed that due to in situ Zn doping a structural deformation from Mn{sub 3}O{sub 4} nanorods to a mixture of Mn{sub 3}O{sub 4} nanorods and nanoparticles occurred. The amount of nanoparticles in the mixture increased with the increase of doping percentage. X-ray diffraction studies, transmission electron microscopy and selected area electron diffraction pattern revealed that both the nanorods and the nanoparticles were hausmannite Mn{sub 3}O{sub 4}. X-ray photoelectron spectroscopic studies confirmed successful zinc doping in Mn{sub 3}O{sub 4}. Microscopic studies revealed that the average diameters of Mn{sub 3}O{sub 4} nanorods and nanoparticles were of 200 nm and 70 nm, respectively. The possible growth mechanism and the reasons behind the formation of nanoparticles along with nanorods are discussed briefly. UV-vis spectroscopic studies showed a continuous increase in the energy bandgap of Mn{sub 3}O{sub 4} with the increase in Zn doping percentage.

36 MATERIALS SCIENCE↗

From Ba{sub 3}Ta{sub 5}O{sub 14}N to LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2}: Decreasing the optical band gap of a photocatalyst

Yellow LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} was successfully synthesized as phase-pure material crystallizing isostructurally to previously reported Ba{sub 3}Ta{sub 5}O{sub 14}N and mixed-valence Ba{sub 3}Ta{sup V}{sub 4}Ta{sup IV}O{sub 15}. The electronic structure of LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} was studied theoretically with the range-separated hybrid method HSE06. The most stable structure was obtained when lanthanum was placed on 2a and nitrogen on 4h sites confirming Pauling's second rule. By incorporating nitrogen, the measured band gap decreases from ∼3.8 eV for the oxide via 2.74 eV for Ba{sub 3}Ta{sub 5}O{sub 14}N to 2.63 eV for the new oxide nitride, giving rise to an absorption band well in the visible-light region. Calculated fundamental band gaps confirm the experimental trend. The atom-projected density of states has large contributions from N2p orbitals close to the valence band edge. These are responsible for the observed band gap reduction. Photocatalytic hydrogen formation was investigated and compared with that of Ba{sub 3}Ta{sub 5}O{sub 14}N revealing significantly higher activity for LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} under UV-light. - Graphical abstract: X-ray powder diffraction pattern of LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} with the results of the Rietveld refinements. Inset: Unit cell of LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} and polyhedral representation of the crystal structure. - Highlights: • Synthesis of a new oxide nitride LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2}. • Refinement of the crystal structure. • Quantum chemical calculations provided band gap close to the measured value. • New phase shows a higher photocatalytic H{sub 2} evolution rate compared to prior tested Ba{sub 3}Ta{sub 5}O{sub 14}N.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗