SEARCH · Search NASA
Results for “COMPUTER NETWORKS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Machine Learning Framework for Rapid Assessment and Optimization of SOC Electrodes from Low Resolution Data
Neural networks and computer vision techniques are used to rapidly predict solid oxide fuel and electrolysis cell performance from low-resolution tomographic data.
Real-time supervisory control implementation of SmAHTR power plant - 143
This paper discusses an implementation of a supervisory control system for a nuclear power plant model using Small modular Advanced High Temperature Reactors (SmAHTR). The simulation operates in real-time using a network of computer agents, implemented on Raspberry Pi's (RPi's), where each major task is performed by one or more RPi's running calculations in parallel. The system architecture contains local, module, master, and operator actions to automate all aspects of the plant. Local level controllers run individual control loops to ensure the desired reference signals are met. The module level controllers set the local level reference signals within each SMR unit and detect sensor and actuator failures to adjust those reference signals as needed. Master level controllers balance plant power by calculating required heat power from each reactor and electric power from each generator and sending that data to the module controllers. Finally, the operator level contains an operator interface to summarize data and faults gathered through the controller levels, with options to review plant and reactor details as desired. This control implementation allows the plant to run autonomously, load follow a desired electrical power curve, and detect a growing number of fault scenarios. Ultimately, this type of supervisory control system will reduce labor-intensive surveillance and testing and allow fewer operators to more safely monitor an entire plant. (authors)
Neural Networks Ensembles to Accelerate Power Grid Contingency Analysis
Novel uncertainty quantification approach for machine learning based physics informed graph neural networks capable of quickly computing bulk energy system contingencies from a large search space with tolerance to changing grid topologies.
A Tailored Convolutional Neural Network for Nonlinear Manifold Learning of Computational Physics Data Using Unstructured Spatial Discretizations
In this work, we propose a nonlinear manifold learning technique based on deep convolutional autoencoders that is appropriate for model order reduction of physical systems in complex geometries. Convolutional neural networks have proven to be highly advantageous for compressing data arising from systems demonstrating a slow-decaying Kolmogorov n-width. However, these networks are restricted to data on structured meshes. Unstructured meshes are often required for performing analyses of real systems with complex geometry. Our custom graph convolution operators based on the available differential operators for a given spatial discretization effectively extend the application space of deep convolutional autoencoders to systems with arbitrarily complex geometry that are typically discretized using unstructured meshes. We propose sets of convolution operators based on the spatial derivative operators for the underlying spatial discretization, making the method particularly well suited to data arising from the solution of partial differential equations. We demonstrate the method using examples from heat transfer and fluid mechanics and show better than an order of magnitude improvement in accuracy over linear methods.
Few-view computed tomography reconstruction using deep neural network inference
A system for generating 2D slices of a 3D image of a target volume is provided. The system receives a target sinogram collected during a computed tomography scan of the target volume. The system inputs the target sinogram to a convolutional neural network (CNN) to generate predicted 2D slices of the 3D image. The CNN is trained using training 2D slices of training 3D images. The system initializes 2D slices to the predicted 2D slices. The system reconstructs 2D slices of the 3D image from the target sinogram and the initialized 2D slices.
Softwarized Federations of Science Instruments with Edge-Continuum Containers
Significant expansion of capabilities of DOE science complex of supercomputers, instruments and networks is expected as powerful experimental facilities, exascale computers and terabit networks are added. Combined with the advances in edge and cloud computing technologies, DOE science users now have the promise of unprecedented execution of complex, continuum workflows, namely, small and latency-sensitive computations at the edge and site, massive computations at remote HPC systems, and everything in between on the cloud. But, bringing this capability to the science user requires overcoming the overwhelming complexity of forming the federations of systems, and efficiently and effectively orchestrating the workflows while ensuring high utilization of the expensive facilities. Current manual configuration of the federated systems simply will not scale, since the coordination across sites may take weeks to months, often leading to under-utilized and hard-to-diagnose compositions. A powerful, composable software stack will be developed to (i) wrap the systems so that federations can be composed fast in software, and (ii) containerize computations to be orchestrated across the edge, site, cloud and HPC resources.
Real-time estimators for scattering observables: A full account of finite-volume errors for quantum simulation
The real-time correlators of quantum field theories can be directly probed through new approaches to simulation, such as quantum computing and tensor networks. This provides a new framework for computing scattering observables in lattice formulations of strongly interacting theories, such as lattice quantum chromodynamics. In this paper, we prove that the proposal of real-time estimators of scattering observables is universally applicable to all scattering observables of gapped quantum field theories. All finite-volume errors are exponentially suppressed, and the rate of this suppression is controlled by the regulator considered, namely, a displacement of the spectrum of the theory into the complex plane. A partial restoration of Lorentz symmetry by averaging over different boosts gives an additional suppression of finite volume errors. Our results also apply to the simulation of wave packet scattering, where a similar averaging is performed to construct the wave packets that regulate the finite volume effects. This result represents a necessary key step toward determining a broad class of scattering observables via quantum computing that are currently inaccessible via classical computing. Such observables are relevant for various applications, including hadron spectroscopy, hadron structure, and precision tests of the Standard Model. We also comment on potential applications of our results to traditional computational schemes.
A Framework for Self-Adaptive Dispersal of Computing Services
Modern networking architectures are making it increasingly possible to disperse services not just across servers but into intermediate network devices as well. Here we introduce the Misson-oriented Adaptive Placement (MAP) architecture, which synthesizes prior work on middleware, load-balancing, constraint solving, and aggregate programming into a framework for self-adaptive management of dispersed services. We provide a first evaluation of the efficacy and resilience that can be provided through this approach: results in simulation demonstrating that MAP can autonomously change the deployment of services to adapt to changing needs and failures.
Anomaly Detection in Dynamic Networks
Anomaly detection in dynamic communication networks has many important security applications. These networks can be extremely large and so detecting any changes in their structure can be computationally challenging; hence, computationally fast, parallelisable methods for monitoring the network are paramount. For this reason the methods presented here use independent node and edge based models to detect locally anomalous substructures within communication networks. As a first stage, the aim is to detect changes in the data streams arising from node or edge communications. Throughout the thesis simple, conjugate Bayesian models for counting processes are used to model these data streams. A second stage of analysis can then be performed on a much reduced subset of the network comprising nodes and edges which have been identified as potentially anomalous in the first stage. The first method assumes communications in a network arise from an inhomogeneous Poisson process with piecewise constant intensity. Anomaly detection is then treated as a changepoint problem on the intensities. The changepoint model is extended to incorporate seasonal behavior inherent in communication networks. This seasonal behavior is also viewed as a changepoint problem acting on a piecewise constant Poisson process. In a static time frame, inference is made on this extended model via a Gibbs sampling strategy. In a sequential time frame, where the data arrive as a stream, a novel, fast Sequential Monte Carlo (SMC) algorithm is introduced to sample from the sequence of posterior distributions of the change points over time. A second method is considered for monitoring communications in a large scale computer network. The usage patterns in these types of networks are very bursty in nature and don’t fit a Poisson process model. For tractable inference, discrete time models are considered, where the data are aggregated into discrete time periods and probability models are fitted to the communication counts. In a sequential analysis, anomalous behavior is then identified from outlying behavior with respect to the fitted predictive probability models. Seasonality is again incorporated into the model and is treated as a changepoint model on the transition probabilities of a discrete time Markov process. Second stage analytics are then developed which combine anomalous edges to identify anomalous substructures in the network.
Quantum tensor network algorithms for evaluation of spectral functions on quantum computers
We investigate quantum algorithms derived from tensor networks to simulate the static and dynamic properties of quantum many-body systems. Using a sequentially prepared quantum circuit representation of a matrix product state (MPS) that we call a quantum tensor network (QTN), we demonstrate algorithms to prepare ground and excited states on a quantum computer and apply them to molecular nanomagnets (MNMs) as a paradigmatic example. In this setting, we develop two approaches for extracting the spectral correlation functions measured in neutron-scattering experiments: (a) a generalization of the SWAP test for computing wave function overlaps and, (b) a generalization of the notion of matrix product operators to the QTN setting which generates a linear combination of unitaries. The latter method is discussed in detail for translationally invariant spin-half systems, where it is shown to reduce the qubit resource requirements compared with the SWAP method and may be generalized to other systems. We demonstrate the versatility of our approaches by simulating spin-1/2 and spin-3/2 MNMs, with the latter being an experimentally relevant model of a Cr$^{3+}_{8}$ ring. Here, our approach has qubit requirements that are independent of the number of constituents of the many-body system and scale only logarithmically with the bond dimension of the MPS representation, making them appealing for implementation on near-term quantum hardware with mid-circuit measurement and reset.
Computationally efficient Bayesian estimation of graphical networks for omics data
Graphical networks are useful, widely-used modeling approaches to represent complex biological processes with biological measurements generated by platforms such as mass spectrometry. Bayesian analyses of graphical networks for omics data have several advantages over their frequentist counterparts, such as the inclusion of prior knowledge in the estimation of models. However, Bayesian approaches to date have only been feasible for data with a couple hundred biomolecules due to prohibitive computational time, but omics data often contains tens of thousands of biomolecules. Here, we present and illustrate a more computationally efficient approach named BPlane (Bayesian PseudoLikelihood-based Algorithm for Network Estimation) to extend Bayesian modeling capabilities for larger-sized datasets, such as most untargeted proteomics data. Via simulation, we demonstrate that BPlane produces substantial computational savings over a current state-of-the-art Bayesian algorithm while maintaining competitive edge detection accuracy. On a SARS-CoV2 proteomics data with 7000 proteins, the competing algorithm takes three times as long to complete the first iteration as BPlane takes to converge after over 100 iterations.
Computer Security for Commercial Nuclear Power Plants - Literature Review for Korea Hydro Nuclear Power Central Research Institute
Sandia National Laboratories (SNL) is providing training and consultation activities on security planning and design for the Korea Hydro and Nuclear Power Central Research Institute (KHNPCRI). As part of this effort, SNL performed a literature review on computer security requirements, guidance and best practices that are applicable to an advanced nuclear power plant. This report documents the review of reports generated by SNL and other organizations [U.S. Nuclear Regulatory Commission, Nuclear Energy Institute, and International Atomic Energy Agency] related to protection of information technology resources, primarily digital controls and computer resources and their data networks. Copies of the key documents have also been provided to KHNP-CRI.
Accelerated computation of lattice thermal conductivity using neural network interatomic potentials
We report with the development of the density functional theory (DFT) and ever-increasing computational capacity, an accurate prediction of lattice thermal conductivity based on the Boltzmann transport theory becomes computationally feasible, contributing to a fundamental understanding of thermal conductivity as well as a choice of the optimal materials for specific applications. However, steep costs in evaluating third-order force constants limit the theoretical investigation to crystals with high symmetry and few atoms in the unit cell. Currently, machine learning potentials are garnering attention as a computationally efficient high-fidelity model of DFT, and several studies have demonstrated that the lattice thermal conductivity could be computed accurately via the machine learning potentials. However, test materials were mostly crystals with high symmetries, and the applicability of machine learning potentials to a wide range of materials has yet to be demonstrated. Furthermore, establishing a standard training set that provides consistent accuracy and computational efficiencies across a wide range of materials would be useful. To address these issues, herein we compute lattice thermal conductivities at 300 K using neural network interatomic potentials. As test materials, we select 25 materials with diverse symmetries and a wide range of lattice thermal conductivities between 10 -1 and 10 3 Wm -1 K -1 . Among various choices of training sets, we find that molecular dynamics trajectories at 50–700 K consistently provide results at par with DFT for the test materials. In contrast to pure DFT approaches, the computational cost in the present approach is uniform over the test materials, yielding a speed gain of 2–10 folds. When a smaller reduced training set is used, the relative efficiency increases by up to ~50 folds without sacrificing accuracy significantly. The current work will broaden the application scope of machine learning potentials by establishing a robust framework for accurately computing lattice thermal conductivity with machine learning potentials.
Malware forensics on mobile devices for DOE-EM applications - 15708
Malware attacks are deployed in order to achieve one of the following goals: To disrupt system functionality; To gather sensitive information; To gain access to private data. The top areas that become primary targets for malware to attack are: Availability, Integrity, Confidentiality. Malware forensics is a particular field where the execution and methods of a malware are studied. Malware activity has increased on unprotected mobile devices. Establishing an accurate and ethical approach is critical when assessing security issues. Knowing the method of execution leads to fewer security risks and prevention of future attacks. Our intentions are not to create a new wave of malware attacks, but to study them and point to possible vulnerabilities that can occur. To create a work-flow for desktop computers, the following benchmarks are used: Using an isolated environment, tracing the host processes, using dynamic analysis to isolate the malware and destroy it. The isolated environment will prevent any malignant code from activating and risking the rest of the computers in the vicinity and/or network. Tracing the host processes, will allow us to read the host and user processes, giving us valuable information on the activities of the device. Using dynamic analysis will allow us to manipulate the malware in a number of ways, such as using a debugger to try and change it. We used a virus and a Trojan to infiltrate a desktop computer for the following reasons: A - The virus will inject itself to force data to connect using a port. B - The Trojan will unlock and grant access to an unauthorized port. With the desktop work-flow in place as a systematic approach for mobile applications, we will investigate how to apply the same methods to the mobile devices. We are currently looking into different ways to develop 'friendly' malware to launch on the Android. We will then try to use malignant Windows malware to infect an Android, and using the work-flow try to come to the same conclusion as with the Android and Desktop, separately.
Quantum neural networks: Current status and prospects for development
The idea of quantum artificial neural networks, first formulated in [34], unites the artificial neural network concept with the quantum computation paradigm. Quantum artificial neural networks were first systematically considered in the PhD thesis by T. Menneer (1998). Based on the works of Menneer and Narayanan [42, 43], Kouda, Matsui, and Nishimura [35, 36], Altaisky [2, 68], Zhou [67], and others, quantum-inspired learning algorithms for neural networks were developed, and are now used in various training programs and computer games [29, 30]. The first practically realizable scaled hardware-implemented model of the quantum artificial neural network is obtained by D-Wave Systems, Inc. [33]. It is a quantum Hopfield network implemented on the basis of superconducting quantum interference devices (SQUIDs). In this work we analyze possibilities and underlying principles of an alternative way to implement quantum neural networks on the basis of quantum dots. A possibility of using quantum neural network algorithms in automated control systems, associative memory devices, and in modeling biological and social networks is examined.
Coding the Computing Continuum: Fluid Function Execution in Heterogeneous Computing Environments
Advances in network technologies have greatly decreased barriers to accessing physically distributed computers. This newfound accessibility coincides with increasing hardware specialization, creating exciting new opportunities to dispatch workloads to the best resource for a specific purpose, rather than those that are closest or most easily accessible. We present Delta, a service designed to intelligently schedule function-based workloads across a distributed set of heterogeneous computing resources. Delta implements an extensible architecture in which different predictors and scheduling algorithms can be integrated to provide dynamically evolving estimates of function execution times on different resources-estimates that can be used to determine the most appropriate location for execution. We describe predictors for function runtime, data transfer time, and cold-start resource provisioning and configuration delay; dynamic learning methods that update predictor models over time; and scheduling strategies that take into account both function and endpoint information. We show that these methods can halve workload makespan when compared with a strategy that selects the fastest resource, and decrease makespan by a factor of five when compared to a round robin strategy, when deployed on a heterogeneous testbed with resources ranging from a Raspberry Pi to a GPU node in an academic cloud.
Network Community Detection on Small Quantum Computers
In recent years, a number of quantum computing devices with small numbers of qubits have become available. A hybrid quantum local search (QLS) approach that combines a classical machine and a small quantum device to solve problems of practical size is presented. Herein, the proposed approach is applied to the network community detection problem. QLS is hardware-agnostic and easily extendable to new quantum computing devices as they become available. It is demonstrated to solve the 2-community detection problem on graphs of sizes of up to 410 vertices using the 16-qubit IBM quantum computer and D-Wave 2000Q, and compare their performance with the optimal solutions. The results herein demonstrate that QLS performs similarly in terms of quality of the solution and the number of iterations to convergence on both types of quantum computers and it is capable of achieving results comparable to state-of-the-art solvers in terms of quality of the solution including reaching the optimal solutions.