Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

An Evaluation of Techroll Seal Flexible Joint Material

This study evaluated the materials utilized in the flexible joint for possible failure modes. Studies undertaken included effect of temperature on the strength of the system, effect of fatigue on the strength of the system, thermogravimetric analysis, thermochemical analysis, differential scanning calorimeter analysis, dynamic mechanical analysis, and peel test. These studies indicate that if the joint failed due to a materials deficiency, the most likely mode was excessive temperature in the joint. In addition, the joint material is susceptible to fatigue damage which could have been a contributing factor.

Hall, W. B.↗
NASA NTRS1984

Materials testing of the IUS techroll seal material

As a part of the investigation of the control system failure Inertial Upper Stage on IUS-1 flight to position a Tracking and Data Relay Satellite (TDRS) in geosynchronous orbit, the materials utilized in the techroll seal are evaluated for possible failure models. Studies undertaken included effect of temperature on the strength of the system, effect of fatigue on the strength of the system, thermogravimetric analysis, thermomechanical analysis, differential scanning calorimeter analysis, dynamic mechanical analysis, and peel test. The most likely failure mode is excessive temperature in the seal. In addition, the seal material is susceptible to fatigue damage which could be a contributing factor.

Nichols, R. L.↗
NASA NTRS1989

Design considerations for a micro-g superfluid helium fluid acquisition system

The general description, the operation, and the design of a superfluid helium (SFHe) fluid acquisition system (FAS) for use under microgravity conditions is presented. For the type of FAS considered here, where fine-mesh woven screens are used to retain flowing SFHe within a gallery arm (flow) channel, those forces which determine the flow dynamics are the micro-g accelerations, liquid surface tension, and tensile strength and cumulative pressure drops along a flow path that begins at the bulk liquid and ends at the entrance to a pump. For this case, the dimensionless number, N(T) is written as the ratio between the pressure drop across the screen and the surface tension forces at the screen for low fluid velocities. Static Bond number measurements have bene taken for SFHe using 325 x 2300 twilled Dutch screen and have indicated a screen pore hydraulic radius of 0.00031 cm.

Lee, J. M.↗
NASA NTRS1995

High-velocity, high-excitation neutral carbon in a cloud in the Vela supernova remnant

HD 72089 is situated behind the Vela supernova remnant, and the interstellar absorption lines in the spectrum of this star are remarkable for two reasons. First, there are six distinct velocity components that span the (heliocentric) velocity range -60 to +121 km/s in the lines of Na I and Ca II. Second, two of the components at high velocity, one at +85 km/s and another at +121.5 km/s, have densities that are large enough to produce observable lines from neutral carbon. The gas moving at +121.5 km/s has such a large pressure that the excited fine-structure levels of the ground electronic state of C I are collisionally populated nearly in proportion to their level degeneracies. This high-velocity gas exhibits unusually low column densities of Mg I and Na I, compared to that of C I. We propose that the +121.5 km/s component represents gas that has cooled and recombined in a zone that follows a shock driven into a cloud by the very recent passage of a supernova blast wave. A representative preshock density of n(sub H) approximately = 13/cc and velocity v(sub s) = 100 km/s is indicated by the strength of diffuse (O III) emission lines seen in directions very near HD 72089. The strong collisional population of excited C I and apparent absence of excited levels of O I give a most favorable fit to the conditions 1000 less than n(sub H) less than 2900/cc over a temperature range 300 less than T less than 1000 K. The fact that the compression is not substantially more than this indicates that the preshock gas may have had an embedded, transverse magnetic field with a strength B greater than or approximately = 1 micro-G. The large dynamical pressure of the supernova blast wave that would be needed to create the cloud shock that we describe implies that the energy of the supernova was 8 x 10(exp 51) ergs, if the Vela remnant is 500 pc away. We can bring this value much closer to typical supernova energies E less than or approximately = 10(exp 51) ergs if the distance to the remnant is revised downward by at least a factor of 2.

Jenkins, Edward B.↗
NASA NTRS2002

Tensile Strength of Carbon Nanotubes Under Realistic Temperature and Strain Rate

Strain rate and temperature dependence of the tensile strength of single-wall carbon nanotubes has been investigated with molecular dynamics simulations. The tensile failure or yield strain is found to be strongly dependent on the temperature and strain rate. A transition state theory based predictive model is developed for the tensile failure of nanotubes. Based on the parameters fitted from high-strain rate and temperature dependent molecular dynamics simulations, the model predicts that a defect free micrometer long single-wall nanotube at 300 K, stretched with a strain rate of 1%/hour, fails at about 9 plus or minus 1% tensile strain. This is in good agreement with recent experimental findings.

Wei, Chen-Yu↗
NASA NTRS1981

On the role of the magnetic field in the solar wind interaction with Venus - Expectations versus observations

Observations of the magnetic field near Venus suggest that elements of three different models (direct interaction, tangential discontinuity, magnetic barrier) are present. A bow shock is found to occur at an altitude of about 0.3 Venus radii at the subsolar point. The compression of the decelerated solar wind plasma behind the bow shock causes interplanetary field lines to 'pile up'. The magnetic field inside the bow shock increases from approximately twice the IMF strength at the bow shock to values in the range of approximately 40-100 gammas at altitudes between about 200 and 1,200 km. The maximum value of the piled up field, which is correlated with the dynamic pressure of the solar wind outside the bow shock, is found at lower altitudes for larger field strengths. Just Venus-ward of the maximum field, the pressure of the cold plasma increases to a level balancing the pressure of the external magnetic field. Hence, to a first approximation, the ionosphere has a diamagnetic response excluding the magnetosheath field. However, strong magnetic fields are found at times throughout the ionosphere.

Luhmann, J. G.↗
DOE OSTI2025

Segmental Dynamics and Vitrification in Associating Copolymer Melts: Role of Cluster Formation, Microdomains, and Cross-Linking

A microscopic statistical mechanical theory of the structure, self-assembly, and activated segmental relaxation is employed to study associating copolymer melts with high attractive sticker fractions, local clustering, and disordered microphase ordering. The stickers are dynamically pinned in a manner that does not affect equilibrium structure which mimics the much slower physical bond breaking process or postassembly cross-linking of sticky monomers. Local sticker clustering and microdomain spatial correlations significantly modify the activated relaxation of nonstickers and glass transition temperature, T g . A re-entrant glass-melting feature is predicted as sticker attraction strength is initially increased corresponding to a speed up of segmental relaxation, and hence reduction of T g relative to the cross-linked homopolymer network. A mechanistic analysis reveals three competing effects: a purely kinetic slowing down of nonstickers down due to cross-linking, disordering of the nonsticker local cage and weakening of effective forces they experience due to sticker physical clustering, and a longer range impact of microdomain scale correlations that results in nonmonotonic dynamical effects. At high enough attraction strength, a qualitative change emerges corresponding to a sticker fraction dependent elevation of T g , which eventually surpasses that of the cross-linked homopolymer network. Dynamically, the new physics arises from a complex evolution of the amplitude of the collective elastic field that dresses the large amplitude mobile segment hopping within a coupled local-nonlocal description of the alpha relaxation. Furthermore, the results are qualitatively consistent with recent experiments on associating PDMS and PPG telechelics of fixed sticker fraction but with chemically different end groups of variable attraction strengths. Finally, possible tests using simulation and the influence of material or model specific interaction potentials and other real world complications are discussed.

Copolymers↗
DOE OSTI2021

Failure of molecular dynamics to provide appropriate structures for quantum mechanical description of the aqueous chloride ion charge-transfer-to-solvent ultraviolet spectrum

The lowest band in the charge-transfer-to-solvent ultraviolet absorption spectrum of aqueous chloride ion is studied by experiment and computation. Interestingly, the experiments indicate that at concentrations up to at least 0.25 M, where calculations indicate ion pairing to be significant, there is no notable effect of ionic strength on the spectrum. The experimental spectra are fitted to aid comparison with computations. Classical molecular dynamic simulations are carried out on dilute aqueous Cl - , Na + , and NaCl, producing radial distribution functions in reasonable agreement with experiment and, for NaCl, clear evidence of ion pairing. Clusters are extracted from the simulations for quantum mechanical excited state calculations. Accurate ab initio coupled-cluster benchmark calculations on a small number of representative clusters are carried out and used to identify and validate an efficient protocol based on time-dependent density functional theory. The latter is used to carry out quantum mechanical calculations on thousands of clusters. The resulting computed spectrum is in excellent agreement with experiment for the peak position, with little influence from ion pairing, but is in qualitative disagreement on the width, being only about half as wide. It is concluded that simulation by classical molecular dynamics fails to provide an adequate variety of structures to explain the experimental CTTS spectrum of aqueous Cl - .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1999

Elevated-Temperature "Ultra" Fast Fracture Strength of Advanced Ceramics: An Approach to Elevated-Temperature "Inert" Strength

The determination of "ultra" fast fracture strengths of five silicon nitride ceramics at elevated temperatures has been made by using constant stress-rate ("dynamic fatigue") testing with a series of "ultra" fast test rates. The test material included four monolithic and one SiC whisker-reinforced composite silicon nitrides. Of the five test materials, four silicon nitrides exhibited the elevated -temperature strengths that approaches their respective room-temperature strengths at an "ultra" fast test rate of 3.3 x 10(exp 4) MPa/s. This implies that slow cracks growth responsible for elevated-temperature failure can be eliminated or minimized by using the "ultra" fast test rate. These ongoing experimental results have shed light on laying a theoretical and practical foundation on the concept and definition of elevated-temperature "inert" strength behavior of advanced ceramics.

Choi, S. R.↗
DOE OSTI2024

Laser Shock Modeling Archival Discussion

The purpose of this discussion is to provide archival information related to the Laser Shock finite element modeling effort. As discussed in Laser Shock System, Assessing bond strength in layered materials (see Section 8.0), the Laser Shock System creates a high-amplitude shockwave on the frontside of a structure (i.e. an aluminum 6061-T6 plate for this discussion) via a high-energy pulsed laser. The shock wave is monitored on the back surface of the structure as a velocity time history. It is a compressive wave as it comes to the back surface but reflects as a tensile wave. If a bond exists in the structure and the reflected tensile wave exceeds its interface threshold stress, then bond rupture occurs. The desire of the Laser Shock effort is to establish (with multiple tests) an ultimate bond strength which can be used for fuel plate design calculations. In this process, the finite element modeling effort is the catalyst to mimic the Laser Shock tests and provide the damage information at the bond that is useful for fuel plate design calculations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Magnetosphere Evolution and Precursor-driven Electromagnetic Signals in Merging Binary Neutron Stars

We detail new force-free simulations to investigate magnetosphere evolution and precursor electromagnetic (EM) signals from binary neutron stars. Our simulations fully follow a representative inspiral motion, capturing the intricate magnetospheric dynamics and their impact on EM outflows. We explore a range of stellar magnetic moment orientations and relative strengths, finding that the magnetospheres and Poynting flux evolution are strongly configuration dependent. The Poynting flux exhibits pulsations at twice the orbital frequency, 2Ω, and is highly anisotropic, following a power-law dependence on orbital frequency. The index ranges from 1 to 6, shaped by the intricate dynamics of the magnetospheres. Furthermore, we present the first computation of (1) the EM forces acting on the star surfaces, revealing the presence of torques that, for highly magnetized stars, could influence the orbital dynamics or break the crust; (2) the high-energy emission signals from these systems by adopting the established isolated pulsar theory. Assuming curvature radiation in the radiation-reaction limit, we find that photons could reach TeV–PeV energies in the last ∼ms for magnetic field strengths 10 10 –10 15 G. However, our analysis of single photon magnetic pair production suggests that these photons are unlikely to escape, with the MeV band emerging as a promising observational window for precursor high-energy emission. In this framework, we construct high-energy emission skymaps and light curves, exploring observational implications. Finally, we propose potential precursor radio emission and delayed afterglow echoes from magnetized outflows, which may contribute to late-time rebrightening in short gamma-ray bursts or to orphan afterglows.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

The influence of pearlite fraction on the shock properties of ferrite–pearlite steel microstructures: Insight into the effect of second-phase particles

Here, the goal of this work is to investigate the effect of varying phase fractions on the overall spall strength and damage behavior of a material. Specifically, two plain carbon, ferrite–pearlite steels (1045 and A283) were subjected to spall recovery experiments to investigate the effect of pearlite fraction on spall strength and total damage. The A283 (20% pearlite) alloy exhibited a higher Hugoniot elastic limit and spall strength compared with 1045 (60% pearlite). Discontinuous and continuous yielding behaviors were observed at quasi-static and dynamic rates for A283 and 1045, respectively. The yielding behavior was connected to pearlite fraction and the prevalence of dislocation-emitting, ferrite/cementite interfaces. Postmortem characterization revealed cementite lamellae cracking within pearlite of 1045, suggesting that pearlite reduces spall strength by providing low-energy damage nucleation sites. The rate of damage growth and coalescence was similar between the two alloys; however, 1045 exhibited more continuous cracks than A283, which exhibited a greater prevalence of discrete voids.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ion Conductivity and Correlations in Model Salt-Doped Polymers: Effects of Interaction Strength and Concentration

Correlated anion and cation motion can greatly reduce the overall ion conductivity in electrolytes versus the ideal conductivity calculated based on the diffusion constants alone. Using coarse-grained molecular dynamics simulations, we calculate conductivity and the degree of uncorrelated ion motion in salt-doped homopolymers and block copolymers as a function of concentration and interaction strengths. Calculating conductivity from ion mobility under an applied electric field increases accuracy versus the typical use of fluctuation dissipation relationships in equilibrium simulations. In typical electrolytes, correlation in cation-anion motion is often expected to be reduced at low ion concentrations. Yet, for these polymer electrolytes with strong ion-polymer and ion-ion interactions, we find cation-anion motion is more correlated at lower concentrations when other variables are held constant. We show this phenomenon is related to the slower ion cluster relaxation rate at low concentrations rather than the static spatial state of ion aggregation or the fraction of free ions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Developing Renewable Energy Applications for Water Treatment Technologies and Transmission

The need for smaller treatment facilities for more isolated or rural municipal entities and industrial water treatment facilities continues to grow. From environmental justice and energy needs in remote communities that have never been serviced by larger scale utilities to smaller onsite treatment requirements to meet discharge regulations, energy efficient treatment systems that can leverage renewable energy sources can be an important asset to owners. Climate change and population dynamics have changed the needs for distributed water treatment systems and the manner in which they function. New treatment technologies that can operate under dynamic conditions and leverage variable energy sources (e.g., renewable energy, RE) can provide substantial efficiencies and cost savings. The National Renewable Energy Laboratory (NREL) is embarking on research projects that will perform multi-scale studies to investigate treatment technologies on varying source water quality that can operate under unsteady state flow conditions (timing) in response to energy availability, supply, and demand. A pilot-scale system will be built to assess modularity and scaling of treatment system operating conditions and performance. Modeling will also be used to determine feasibility and integration into grid emulation platforms to understand the use and value of operation with RE. Optimization will be completed for the treatment and distribution systems to document strengths and weaknesses of using RE power sources. Results of this effort will advance dynamic water treatment understanding under variable conditions and integration of RE sources to power these systems. This will lead to further decarbonization of municipal and private treatment facilities while supporting a paradigm shift in water treatment process operation and system design to achieve net-zero goals and move toward energy-sensitive resilient water treatment systems.

ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Dynamic Tensile Characterization of Thin-Sheet Brittle Metallic Materials

Refractory metals are favorable materials in applications where high strength and ductility are needed at elevated temperatures. In some cases, operating temperatures may be near the melting point of the material. However, as temperature drops, refractory metals typically undergo a significant mechanical response change - ductile-to-brittle transition. These materials may be subjected to high strain rate loading at an ambient temperature state, such as an impact or crash. Knowledge of the high rate material properties are essential for design as well as simulation of impact events. The high rate stress-strain behavior of brittle metallic materials at ambient temperature is rarely studied because of experimental challenges, particularly when failure is involved. Failure typically occurs within the non-gage section of the material, which invalidates any collected stress-strain information. Here, a method to determine a specimen geometry which will produce failures in the gage section is presented. Pure tungsten in thin-sheet form was used as a trial material to select a specimen geometry for high rate Kolsky tension bar experiments. A finite element simulation was conducted to derive a strain correction for more accurate results. The room temperature stress-strain behavior of pure tungsten at a strain rate of 24 s –1 is presented. The outcome of this experimental technique can be applied to other brittle materials for dynamic tensile characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structure-property relationship between lignin structures and properties of 3D-printed lignin composites

Lignin is a low-cost and renewable bioresource with a huge annual production promising to prepare sustainable materials. However, the poor interfacial adhesion between many lignin-polymer pairs deteriorates the mechanical performance of the composites, which seriously limits the application of lignin in 3D printing via fused depositional modeling. This work examined lignin-polyamide 12 (PA 12) intermolecular interactions (e.g., hydrogen bonding) to address the interface challenge. To realize this goal, the phenolic hydroxyl content was increased for a kraft softwood lignin using a LiBr/HBr demethylation procedure, increasing phenoxy content by 61.7%. Increased hydrogen bonding interactions between modified lignin (Pine-Lig-OH) and PA 12 demonstrated a significantly improved molten dynamic modulus by rheological analysis. Regarding mechanical properties, by adding 20 wt% of Pine-Lig-OH, the tensile strength and Young's modulus reached 46.6 MPa and 1.62 GPa, 30.2% and 33.9% higher than PA 12, respectively. Further morphological analysis proved the interfacial interactions are enhanced by showing the difference in the phase gaps. The dynamic mechanical analysis (DMA) supported the conclusion that Pine-Lig-OH could interact with polymer chains, alternating segmental movements due to the strong interaction. Here, this study presents a method to enhance lignin composite properties by promoting interactions with the polymer matrix through modified functional groups, guiding future lignin composite research.

36 MATERIALS SCIENCE↗
NASA NTRS1999

The Effects of Partial Mechanical Loading and Ibandronate on Skeletal Tissues in the Adult Rat Hindquarter Suspension Model for Microgravity

We report initial data from a suspended rat model that quantitatively relates chronic partial weightbearing to bone loss. Chronic partial weightbearing is our simulation of the effect of limited artificial gravity aboard spacecraft or reduced planetary gravity. Preliminary analysis of bone by PQCT, histomorphometry, mechanical testing and biochemistry suggest that chronic exposure to half of Earth gravity is insufficient to prevent severe bone loss. The effect of episodic full weightbearing activity (Earth Gravity) on rats otherwise at 50% weightbearing was also explored. This has similarity to treatment by an Earth G-rated centrifuge on a spacecraft that normally maintained artificial gravity at half of Earth G. Our preliminary evidence, using the above techniques to analyze bone, indicate that 2 hours daily of full weightbearing was insufficient to prevent the bone loss observed in 50% weightbearing animals. The effectiveness of partial weightbearing and episodic full weightbearing as potential countermeasures to bone loss in spaceflight was compared with treatment by ibandronate. Ibandronate, a long-acting potent bisphosphonate proved more effective in preventing bone loss and associated functionality based upon structure than our first efforts at mechanical countermeasures. The effectiveness of ibandronate was notable by each of the testing methods we used to study bone from gross structure and strength to tissue and biochemistry. These results appear to be independent of generalized systemic stress imposed by the suspension paradigm. Preliminary evidence does not suggest that blood levels of vitamin D were affected by our countermeasures. Despite the modest theraputic benefit of mechanical countermeasures of partial weightbearing and episodic full weightbearing, we know that some appropriate mechanical signal maintains bone mass in Earth gravity. Moreover, the only mechanism that correctly assigns bone mass and strength to oppose regionally specific force applied to bone is mechanical, a process based upon bone strain. Substantial evidence indicates that the specifics of dynamic loading i.e. time-varying forces are critical. Bone strain history is a predictor of the effect that mechanical conditions have on bone structure mass and strength. Using servo-controlled force plates on suspended rats with implanted strain gauges we manipulated impact forces of ambulation in the frequency (Fourier) domain. Our results indicate that high frequency components of impact forces are particularly potent in producing bone strain independent of the magnitude of the peak force or peak energy applied to the leg. Because a servo-system responds to forces produced by the rat's own muscle activity during ambulation, the direction of ground-reaction loads act on bone through the rat's own musculature. This is in distinction to passive vibration of the floor where forces reach bone through the natural filters of soft tissue and joints. Passive vibration may also be effective, but it may or may not increase bone in the appropriate architectural pattern to oppose the forces of normal ambulatory activity. Effectiveness of high frequency mechanical stimulation in producing regional (muscle directed) bone response will be limited by 1. the sensitivity of bone to a particular range of frequencies and 2. the inertia of the muscles, limiting their response to external forces by increasing tension along insertions. We have begun mathematical modeling of normal ambulatory activity. Effectiveness of high frequency mechanical stimulation in producing regional (muscle directed) bone response will be limited by 1. the sensitivity of bone to a particular range of frequencies and 2. the inertia of the muscles, limiting their response to external forces by increasing tension along insertions. We have begun mathematical modeling of the rat forelimb as a transfer function between impact force and bone strain to predict optimal dynamic loading conditions for this system. We plan additional studies of mechanical counter-measures that incorporate improved dynamic loading, features relevant to anticipated evaluation of artificial gravity, exercise regimens and exposure to Martian gravity, The combination of mechanical countermeasures with ibandronate will also be investigated for signs of synergy.

Schultheis, Lester W.↗