Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Electrical properties of thin-film structures formed by pulsed laser deposition of Au, Ag, Cu, Pd, Pt, W, Zr metals on n-6H-SiC crystal

Diode structures with ideality factors of 1.28-2.14 and potential barriers from 0.58 to 0.62 eV on the semiconductor side were formed by pulsed laser deposition of Au, Ag, Cu, Pd, Pt, W, and Zr metal films on n-6H-SiC crystal without epitaxial layer preparation. A high density of surface acceptor and donor states was formed at the metal-semiconductor interface during deposition of the laser-induced atomic flux, which violated the correlation between the potential barrier height and metal work function. The barrier heights determined from characteristic currents and capacitance measurements were in quite good agreement. For the used low-resistance semiconductor and contact elements, the sizes of majority carrier (electron) depletion regions were determined as 26-60 nm.

36 MATERIALS SCIENCE↗

Investigation of magneto-electric properties of BCZT-NFO particulate composite

:Synthesis and characterizations for ferroelectric, ferromagnetic properties of 50BCZT - 50NFO particulate composite have been investigated. Phase pure BCZT (tetragonal) and NFO (cubic inverse spinel) have been observed in powder XRD pattern of 50BCZT-50NFO composite. Average grain size of 12µm for BCZT and 4µm for NFO have been observed in the back scattered electron diffraction (BSE) image of the sintered sample. Hysteresis loop measurement reveals typical ferroelectric nature of the sample with remnant and saturation polarizations of 8.34µC/cm{sup 2} and 17.4µC/cm{sup 2}, respectively. Furthermore, sintered BCZT-NFO sample also showed good ferromagnetic M-H hysteresis loop with saturation magnetization upto ~14.6emu/g. Magnetostriction measurements showed a value of ~ - 20ppm for pure NFO and ~ - 8ppm for the composite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of sintering temperature on the structural and electrical properties of Zn{sub 0.95}Cr{sub 0.05}O

In this communication, we report the results of the studies on the sintering temperature dependent structural properties and dielectric behavior of 5% Cr doped Zn{sub 0.95}Cr{sub 0.05}O samples synthesized by cost effective sol-gel technique. Crystallographic orientations, crystallinity and crystallite size (CS) have been understood by performing X-ray diffraction (XRD) measurement at room temperature. Values of CS have been further verified by carrying out Williamson – Hall (W-H) plot analysis and the difference between the CS from XRD and W-H analyses has been discussed. Dielectric behavior has been studied and its dependence on the sintering temperature has been understood in the light of crystallite size, crystal boundary density and oxygen vacancies induced possible conductivity in the samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, magnetic and electrical properties of ferromagnetic/ferroelectric multilayers

The La{sub 0.75}Sr{sub 0.25}MnO{sub 3} (LSMO)/Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BSTO) superlattices and bilayers, where LSMO is ferromagnetic and BSTO is ferroelectric, were grown by dc sputtering. X-ray diffraction indicates that the samples present a textured growth with the c axis perpendicular to the substrate. Magnetization measurements show a decrease of the sample's magnetization for decreasing ferromagnetic thickness. This effect could be related to the presence of biaxial strain and a magnetic dead layer in the samples. Conductive atomic force microscopy indicates that the samples present a total covering of the ferromagnetic layer for a ferroelectric thickness higher than four unit cells. Transport tunneling of the carriers seems to be the preferred conduction mechanism through the ferroelectric layer. These are promising results for the development of multiferroic tunnel junctions.

36 MATERIALS SCIENCE↗

The effect of an excess of components on the electrical properties of indium-antimonide films

The causes of anomalous behavior of the Hall mobility of charge carriers as a result of a decrease in the measurement temperature from 300 K in indium-antimonide films obtained by the method of three temperatures are studied. It is shown experimentally that there exist drops in the “admissible” temperatures of evaporators of components and the substrate within which continuous conducting films are obtained. The optimal conditions for sample preparation for which the values of the mobility remain practically constant in the temperature range of 150–350 K are determined. On the basis of the comparison with optical-transmission spectra, it is concluded that there is a high concentration of defects in the films; these defects are related to deviation of the composition from stoichiometry and act as donor and acceptor centers. The presence of such defects makes it possible to explain the decrease in mobility in the films as the temperature is lowered.

36 MATERIALS SCIENCE↗

The effect of deposition power on the electrical properties of Al-doped zinc oxide thin films

We investigated the effect on the electronic properties of aluminum (Al)-zinc oxide (ZnO) films by modulating the radio frequency sputtering power. Our experimental results show that increasing the sputtering power increases the Al doping concentration, decreases the resistivity, and also shifts the Zn 2p and O 1s to higher binding energy states. Our local-density approximation (LDA) and LDA+U calculations show that the shift in higher binding energy and resistivity decrease are due to an enhancement of the O 2p-Zn 3d coupling and the modification of the Zn 4s-O 2p interaction in ZnO induced by Al doping.

36 MATERIALS SCIENCE↗

Growth and structural, optical, and electrical properties of zincite crystals

An X-ray diffraction study of ZnO crystals grown by the hydrothermal method has revealed reflections that give grounds to assign them to the sp. gr. P3 rather than to P6{sub 3}mc. The distribution of Zn1, Zn2, O1, and O2 over structural positions, along with vacancies and incorporated zinc atoms, explains the dissymmetrization observed in terms of the kinetic (growth) phase transition of the order-disorder type, which is caused by ordering Zn and O atoms over structural positions. The color of crystals of refined compositions (Zn{sub 0.975}{open_square}{sub 0.025})Zn{sub i(0.015)}(O{sub 0.990}{open_square}{sub 0.010}) (green) and (Zn{sub 0.965}{open_square}{sub 0.035})Zn{sub i(0.035)}O (bright green) is related to different oxygen contents, which is confirmed by the results of electron probe X-ray microanalysis and absorption spectroscopy. The degree of the structural quality of crystals, their resistivity, and activation energy are also related to oxygen vacancies.

36 MATERIALS SCIENCE↗

Optical and Electrical Properties of Al/(p)Bi{sub 2}S{sub 3} Schottky Junction

Thin film Al/(p)Bi{sub 2}S{sub 3} Schottky junctions were prepared by vacuum evaporation under pressure 10{sup -6} Torr. The p-type Bi{sub 2}S{sub 3} thin films with acceptor concentration (3.36-7.33)x10{sup 16}/cm{sup 3} were obtained by evaporating 'In' along with Bi{sub 2}S{sub 3} powder and then annealing the films at 453K for 5 hours. Different junction-parameters such as ideality factor, barrier height, effective Richardson's constant, short-circuit current, etc. were determined from I-V characteristics. The junctions exhibited rectifying I-V characteristics and also photovoltaic effect. Ideality factor was found to decrease with the increase of temperature. Proper doping, annealing, and hydrogenation are necessary to reduce the series resistance so as to achieve high carrier efficiency. More works are being carried out in this direction.

36 MATERIALS SCIENCE↗

Thickness effect on the structural and electrical properties of poly-SiGe films

Graphical abstract: - Highlights: • Stress and Young's modulus of poly-SiGe film are linked to the grain columnar structure. • The above properties remain unchanged for poly-SiGe films thicker than 40 nm. • The point of transition is close to the electron mean free path for SiGe. • Both the resistivity and Hall mobility follow a similar trend. - Abstract: As lateral dimensions of electromechanical devices are scaled down to length scales comparable to electron mean free paths, the influence of thickness effect on their properties becomes sine qua non. This paper presents a detailed study of thickness effect on the Young's modulus, residual stress, resistivity and Hall mobility of ultrathin poly-Si{sub 11}Ge{sub 89} films deposited by low pressure chemical vapour deposition. The Young's moduli for the films thicker than ∼40 nm are close to the bulk value (135 GPa) while those of the thinner films are much lower. The reduction in resistivity and subsequent improved Hall mobility as thickness increases are discussed in light of surface morphology which is evident from atomic microscopy images. The near constant values of Young's modulus, resistivity and Hall mobility for the films thicker than ∼40 nm are attributed to the columnar grain structure as confirmed by the transmission electron microscopy images.

36 MATERIALS SCIENCE↗

Direct observation of electrical properties of grain boundaries in sputter-deposited CdTe using scan-probe microwave reflectivity based capacitance measurements

Here, polycrystalline CdTe in 12% efficient solar cells has been studied using scanning microwave impedance microscopy (sMIM). The CdS/CdTe junctions were grown on transparent-conducting-oxide-coated soda lime glass using rf sputter deposition. sMIM based capacitance measurements were performed on the exposed surface of CdCl 2 treated CdTe adjacent to thermal-evaporation-deposited Cu/Au back contacts. The sMIM instrument was operated at ~3 GHz, and capacitance measurements were performed as a function of ac and dc voltage biases applied to the tip, with and without sample illumination. Although dc capacitance measurements are affected by sample topography, the differential capacitance measurement was shown to be topography independent. It was found that the grain boundaries exhibit a depleted carrier concentration as compared to the grain bulk. This depletion effect is enhanced under photo-generated carrier separation or under sufficiently large probe tip biases opposite to the majority carrier charge.

14 SOLAR ENERGY↗

Contribution of Co{sup 3+} ions to the high-temperature magnetic and electrical properties of GdCoO{sub 3}

The temperature dependence of the static magnetization of polycrystalline rare-earth cobaltite GdCoO{sub 3} is measured in the temperature range 2-800 K. The magnetic behaviors of GdCoO{sub 3} and Gd{sup 3+} are found to be different at temperatures above room temperature, which is caused by the appearance of a contribution from Co{sup 3+} ions at high temperatures. The temperature dependence of the magnetic susceptibility of GdCoO{sub 3} is determined by the magnetization of rare-earth gadolinium ions and the additional paramagnetic contribution induced by the thermally excited magnetic terms of Co{sup 3+} ions. The LDA + GTB method is used to calculate the electronic structure of GdCoO{sub 3} in the temperature range 0-300 K with allowance for strong electron correlations. The energy spectrum of GdCoO{sub 3} is found to have intragap states that decrease the dielectric gap width with increasing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and electrical properties of the (Si/Ge)-on-insulator structures formed by ion implantation and subsequent hydrogen-assisted transfer

Systematic features of endotaxial growth of intermediate germanium layers at the bonding interface in the silicon-on-insulator structure consisting of buried SiO{sub 2} layer implanted with Ge{sup +} ions are studied in relation to the annealing temperature. On the basis of the results for high-resolution electron microscopy and thermodynamic analysis of the Si/Ge/SiO{sub 2} system it is assumed that the endotaxial growth of the Ge layer occurs via formation of a melt due to enhanced segregation and accumulation of Ge at the Si/SiO{sub 2} interface. Effect of germanium at the bonding interface on the Hall mobility of holes in silicon layers with nanometer-scale thickness is studied. It is found that the structures including the top silicon layer with the thickness 3-20 nm and incorporating germanium feature the hole mobility that exceeds by a factor of 2-3 the hole mobility in corresponding Ge-free silicon-on-insulator structures.

36 MATERIALS SCIENCE↗

Electrical properties of hybrid (ferromagnetic metal)-(layered semiconductor) Ni/p-GaSe structures

Two-barrier Ni/n-Ga2Se3/p-GaSe structures with nanoscale Ni-alloy grains caused by reactions at the 'metal-layered semiconductor' interface were formed after growing Ni layers on the p-GaSe (0001) surface. Current-voltage and capacitance-voltage characteristics of hybrid structures were studied in the temperature range of 220-350 K. The dependence of the impedance spectra on the bias voltage was studied at various temperatures. The frequency dependences of the impedance at high frequencies (f = 10{sup 6} Hz) are discussed in terms of the phenomena of spin injection and extraction in structures with an ultrathin spin-selective Ni/n-Ga{sub 2}Se{sub 3} barrier and the effects of spin diffusion and relaxation in the semiconductor substrate. The room-temperature phenomena of the Coulomb blockade and negative differential capacitance were detected. These phenomena are explained based on an analysis of transport processes in a narrow region near the 'ferromagnetic metal-semiconductor' interface, where nanoscale grains are arranged.

36 MATERIALS SCIENCE↗

Synthesis of uniform CdS nanowires in high yield and its single nanowire electrical property

Large-scale high quality CdS nanowires with uniform diameter were synthesized by using a rapid and simple solvothermal route. Field emission scan electron microscopy (FESEM) and transmission electron microscopy (TEM) images show that the CdS nanowires have diameter of about 26 nm and length up to several micrometres. High resolution TEM (HRTEM) study indicates the single-crystalline nature of CdS nanowires with an oriented growth along the c-axis direction. The optical properties of the products were characterized by UV-vis absorption spectra, photoluminescence spectra and Raman spectra. The resistivity, electron concentration and electron mobility of single NW are calculated by fitting the symmetric I-V curves measured on single NW by the metal-semiconductor-metal model based on thermionic field emission theory. - Graphical abstract: Large-scale high quality CdS nanowires (NWs) with uniform diameter were synthesized by using a rapid and simple solvothermal route. The reaction time is reduced to 2 h, comparing to other synthesis which needed long reaction time up to 12 h. In addition, the as-prepared CdS nanowires have more uniform diameter and high yield. More importantly, the I-V curve of present single CdS nanowire has a good symmetric characteristic as expected by the theory.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modification of energy band alignment and electric properties of Pt/Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3}/Pt thin-film ferroelectric varactors by Ag impurities at interfaces

We report on the effects of Ag impurities at interfaces of parallel-plate Pt/Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3}/Pt thin film ferroelectric varactors. Ag impurities occur at the interfaces due to diffusion of Ag from colloidal silver paint used to attach the varactor samples with their back side to the plate heated at 600–750 °C during deposition of Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3}. X-ray photoelectron spectroscopy and secondary ion mass spectrometry suggest that amount and distribution of Ag adsorbed at the interfaces depend strongly on the adsorbent surface layer. In particular, Ag preferentially accumulates on top of the Pt bottom electrode. The presence of Ag significantly reduces the barrier height between Pt and Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} leading to an increased leakage current density and, thus, to a severe degradation of the varactor performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Ti Doping on Structural and Electrical Properties of Ba(Fe{sub 0.5}Nb{sub .0.5})O{sub 3} Ceramic

Polycrystalline samples of Ba(Fe{sub 1-x}Ti{sub 2x}Nb{sub 1-x}){sub 0.5}O{sub 3}(BFTN) with x = 0, 0.1, 0.2 have been synthesized using a high-temperature solid-state reaction technique. The X-ray diffraction of the sample (x = 0) at room temperature shows a monoclinic phase. When the doped contents of Ti are over 10 mole% the structure changes from monoclinic to tetragonal. Scanning electron micrographs of the compounds show that grains are uniformly and densely distributed over the entire surface of the sample. The complex impedance plots show that there is only bulk (grain) contribution in the compounds in the said temperature range, and is of non-Debye type of relaxation. Bulk resistance of the material has been observed to be concentration dependent. Conductivity analysis indicates that ac/dc conductivity of the materials increases with increase in temperature. It shows a typical negative temperature coefficient of resistance (NTCR) behaviour like a semiconductor. The conductivity has been found to decrease on Ti doping.

36 MATERIALS SCIENCE↗

Effect of Helium implantation on gettering and electrical properties of 4H-SiC epilayers

This paper tests the gettering ability of sites created by He implantation in 4H-SiC while heating the sample or not, and their impact on carrier lifetime. The spatial distribution of implantation-induced defects (cavities, stacking faults and dislocations) is studied by transmission electron microscopy (TEM) and is compared to gold profiles performed by Rutherford Backscattering (RBS) in samples intentionally contaminated with gold. Minority carrier lifetimes are also measured with a specific set-up based on microwave photoconductivity decay ({mu}-PCD). Though gold atoms do not seem to be efficiently trapped by cavities, the presence of dislocations is of major importance to monitor gold diffusion. Indeed, they can double both its level and its diffusion length in the bulk. Gold is assumed to diffuse faster along dislocation cores. Besides, the implantation-related defects are found to improve the carrier lifetime in the material, but the role of He{sup 2+} left in cavities remains to be investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studies on structural and electrical properties of pure and doped h-YMnO{sub 3}

In the present communication, we report the results of the structural and electrical studies on pure YMnO{sub 3} (YMO) and Zr doped Y{sub 0.95}Zr{sub 0.05}MnO{sub 3} (YZMO) samples, synthesized using low cost sol-gel technique. To understand the structural properties, structural phases present and effect of doping on the structural behavior, X-ray diffraction (XRD) measurements were carried out for both the samples understudy. XRD results reveal the single phasic nature of both the samples having hexagonal unit cell structure. Improved crystal structure has been observed for pure YMnO{sub 3} sample while doping of Zr at Y-site degrades the structure of the sample. Improved dielectric constant and enhanced AC conductivity (σ{sub a}) have been discussed on the basis of charge carrier polarization and correlated barrier hopping due to the localized state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗