Search NASA⌕ Search

SEARCH · Search NASA

Results for “Feature maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Naming the newly found landforms on Venus

The mapping of Venus is unique in the history of cartigraphy; never has so much territory been discovered and mapped in so short a period of time. Therefore, in the interest of international scientific communication, there is a unique urgency to the development of a system of names for surface features on Venus. The process began with the naming of features seen on radar images taken from Earth and continued through mapping expeditions of the U.S. and U.S.S.R. However, the Magellan Mission resolves features twenty-five times smaller than those mapped previously, and its radar data will cover an area nearly equivalent to that of the continents and the sea-floors of the Earth combined. The International Astronomical Union (IAU) was charged with the formal endorsement of names of features on the planets. Proposed names are collected, approved, and applied through the IAU Working Group for Planetary System Nomenclature (WGPSN) and its task groups, prior to IAU approval by the IAU General Assembly. Names approved by the WGPSN and its task groups, prior to final approval may be used on published maps and articles, provided that their provisional nature is stipulated. The IAU has established themes for the names to be used on each of the planets; names of historical and mythological women are used on Venus. Names of political entities and those identified with active religions are not acceptable, and a person must have been deceased for three years or more to be considered. Any interested person may propose a name for consideration by the IAU.

Batson, R. M.↗
NASA NTRS2005

The Atmospheres of Saturn and Titan in the Near-Infrared: First Results of Cassini/VIMS

The wide spectral coverage and extensive spatial, temporal, and phase-angle mapping capabilities of the Visual Infrared Mapping Spectrometer (VIMS) onboard the Cassini-Huygens Orbiter are producing fundamental new insights into the nature of the atmospheres of Saturn and Titan. For both bodies, VIMS maps over time and solar phase angles provide information for a multitude of atmospheric constituents and aerosol layers, providing new insights into atmospheric structure and dynamical and chemical processes. For Saturn, salient early results include evidence for phosphine depletion in relatively dark and less cloudy belts at temperate and mid-latitudes compared to the relatively bright and cloudier Equatorial Region, consistent with traditional theories of belts being regions of relative downwelling. Additional Saturn results include (1) the mapping of enhanced trace gas absorptions at the south pole, and (2) the first high phase-angle, high-spatial-resolution imagery of CH4 fluorescence. An additional fundamental new result is the first nighttime near-infrared mapping of Saturn, clearly showing discrete meteorological features relatively deep in the atmosphere beneath the planet's sunlit haze and cloud layers, thus revealing a new dynamical regime at depth where vertical dynamics is relatively more important than zonal dynamics in determining cloud morphology. Zonal wind measurements at deeper levels than previously available are achieved by tracking these features over multiple days, thereby providing measurements of zonal wind shears within Saturn's troposphere when compared to cloudtop movements measured in reflected sunlight. For Titan, initial results include (1) the first detection and mapping of thermal emission spectra of CO, CO2, and CH3D on Titan's nightside limb, (2) the mapping of CH4 fluorescence over the dayside bright limb, extending to approximately 750 km altitude, (3) wind measurements of approximately 0.5 ms(exp -1), favoring prograde, from the movement of a persistent (multiple months) south polar cloud near 88 deg S latitude, and (4) the imaging of two transient mid-southern-latitude cloud features.

Cassini Mission↗
NASA NTRS1993

Pargo Chasma and its relationship to global tectonics

Pargo Chasma was first identified on Pioneer Venus data as a 10,000 km long lineation extending from Atla Regio in the north terminating in the plains south of Phoebe Regio. More recent Magellan data have revealed this feature to be one of the longest chains of coronae so far identified on the planet. Stofan et al have identified 60 coronae and 2 related features associated with this chain; other estimates differ according to the classification scheme adopted, for example Head et al. identify only 29 coronae but 43 arachnoids in the same region. This highlights one of the major problems associated with the preliminary mapping of the Magellan data: there has been an emphasis on identifying particular features on Venus without a universally accepted scheme to classify those features. Nevertheless, Pargo Chasma is clearly identified as a major tectonic belt of global significance. Together with the Artemis-Atla-Beta tectonic zone and the Beta-Phoebe rift belt, Pargo Chasma defines a region on Venus with an unusually high concentration of tectonic and volcanic features. Thus, an understanding of the processes involved in the formation of Pargo Chasma may lend significant insight into the evolution of the region and the planet as a whole. I have produced a detailed 1 to 10 million scale map of Pargo Chasma and the surrounding area from preliminary USGS controlled mosaiced image maps of Venus constructed from Magellan data. In view of the problems highlighted above in relation the efforts already made at identifying a particular set of features I have mapped the region purely on the basis of the geomorphology visible in the magellan data without any attempt at identifying a particular set or class of features. Thus, the map produced distinguishes between areas of different brightness and texture. This has the advantage of highlighting the tectonic fabric of Pargo Chasma and clearly illustrates the close inter-relationship between individual coronae and the surrounding tectonic belts.

Ghail, R. C.↗
NASA NTRS2011

Object-Based Mapping of the Circumpolar Taiga-Tundra Ecotone with MODIS Tree Cover

The circumpolar taiga tundra ecotone was delineated using an image-segmentation-based mapping approach with multi-annual MODIS Vegetation Continuous Fields (VCF) tree cover data. Circumpolar tree canopy cover (TCC) throughout the ecotone was derived by averaging MODIS VCF data from 2000 to 2005 and adjusting the averaged values using linear equations relating MODIS TCC to Quickbird-derived tree cover estimates. The adjustment helped mitigate VCF's overestimation of tree cover in lightly forested regions. An image segmentation procedure was used to group pixels representing similar tree cover into polygonal features (segmentation objects) that form the map of the transition zone. Each polygon represents an area much larger than the 500 m MODIS pixel and characterizes the patterns of sparse forest patches on a regional scale. Those polygons near the boreal/tundra interface with either (1) mean adjusted TCC values from5 to 20%, or (2) mean adjusted TCC values greater than 5% but with a standard deviation less than 5% were used to identify the ecotone. Comparisons of the adjusted average tree cover data were made with (1) two existing tree line definitions aggregated for each 1 degree longitudinal interval in North America and Eurasia, (2) Landsat-derived Canadian proportion of forest cover for Canada, and (3) with canopy cover estimates extracted from airborne profiling lidar data that transected 1238 of the TCC polygons. The adjusted TCC from MODIS VCF shows, on average, less than 12% TCC for all but one regional zone at the intersection with independently delineated tree lines. Adjusted values track closely with Canadian proportion of forest cover data in areas of low tree cover. A comparison of the 1238 TCC polygons with profiling lidar measurements yielded an overall accuracy of 67.7%.

Ranson, K. J.↗
DOE OSTI2024

AXI4MLIR: User-Driven Automatic Host Code Generation for Custom AXI-Based Accelerators

Tensor algebra operations represent an important class of algorithms used across many applications, including machine learning, scientific computing, and data analytics. As a result, the efficient generation of custom accelerators for tensor operations has received increased attention. Previous efforts have produced automated tools enabling users to prototype and explore optimized accelerators. However, little effort has been focused on the host-accelerator interaction in these tools. Efficient use of hardware accelerators requires knowledge about the accelerator's capabilities (operations, data formats, and opcode support), the host CPU microarchitecture (e.g., memory hierarchy), the host-accelerator interface, and the application's features (which code regions should be mapped onto an accelerator). Manually rewriting the original applications to facilitate improved custom accelerator mapping is an error-prone and time-consuming endeavor. To cope with this, we propose AXI4MLIR, a new framework to automatically generate and optimize the communication between the host CPU and arbitrary accelerators that implement linear algebra algorithms. AXI4MLIR extends the MLIR compiler framework to automatically generate efficient host-accelerator driver code for accelerators with AXI-based interfaces. Our compiler extensions enable automatic driver code generation while carefully considering the host's memory hierarchy and target accelerator features. To demonstrate the flexibility and utility of AXI4MLIR, we test it with diverse use cases that include different types of accelerators, tiling scenarios, and dataflow schemes. We compare our experimental results to manual implementations of host-accelerator driver code and find that our approach can reduce CPU cache references by 56% and deliver up to a 1.65x speedup.

Bohm Agostini, Nicolas↗
NASA NTRS2010

Mid-IR Spectra of HED Meteorites and Synthetic Pyroxenes: Reststrahlen Features (9-12 micron)

In an earlier study. Hamilton (2000) mapped the behavior of the 9-12 micron reststrahlen structures with composition in a suite of primarily natural terrestrial pyroxenes. Here we examine the same set of reststrahlen features in the spectra of diogenites and eucrites and place them in the context of the terrestrial samples and of a suite of well-characterized synthetic pyroxenes. The results will be useful to the interpretation of mid-IR spectra of 4 Vesta and other basaltic asteroids.

Lim, Lucy F.↗
NASA NTRS1977

Airborne far-infrared observations of the galactic center region

Maps of a region 10 arcmin in diameter around the galactic center made simultaneously in three wavelength bands at 30, 50, and 100 microns with about 1 arcmin resolution are presented, and the distribution of far-IR luminosity and color temperature across this region is derived. The position of highest far-IR surface brightness coincides with the peak of the late-type stellar distribution and with the H II region Sgr A West. The high spatial and temperature resolution of the data is used to identify features of the far-IR maps with known sources of near-IR, radio continuum, and molecular emission. The emission mechanism and energy sources for the far-IR radiation are analyzed qualitatively, and it is concluded that all of the observed far-IR radiation from the galactic-center region can be attributed to thermal emission from dust heated both by the late-type stars and by the ultraviolet sources which ionize the H II regions. A self-consistent model for the far-IR emission from the galactic-center region is presented. It is found that the visual extinction across the central 10 pc of the Galaxy is only about 3 mag and that the dust density is fairly uniform in this region. An upper limit of 10 million suns is set on the luminosity of any still unidentified source of 0.1- to 1-micron radiation at the galactic center.

Gatley, I.↗
NASA NTRS1987

Recent data quality and earth science results from the Landsat thematic mapper

The results of the NASA Landsat Image Data Quality Analysis (LIDQA) program are reviewed. Landsat-4 and Landsat-5 TM data quality with regard to image geometry and radiometry are discussed. The results indicate that the TM provides excellent imagery that can be used in the form of satellite image maps meeting cartographic standards at scales of 1:100,000 or smaller. These data can be used to locate features or guide the revision or updating of maps for scales up to 1:24,000. The TM sensor is also providing data of good radiometric quality and stability, with radiometric uncertainties of 1 percent or smaller. The temperature dependence in the absolute radiometry is on the order of 1 to 5 percent of full scale. In terms of bidirectional reflectance estimated at the satellite, the error is estimated at under 6 percent and commonly 3 percent. Preliminary results also corroborate the utility of the TM data for geological or geographical studies.

Salomonson, Vincent V.↗
NASA NTRS1979

Preliminary geological mapping of Io

A preliminary summary of information gained by Voyager 1 on the colored, terrain and landform surface units of Io and their global distribution is presented. Colored units are classified as white to bluish-white regions which may be sulfur or sulfur dioxide deposits, red, orange, or yellow regions thought to contain various sublimates or alterations of sulfur, brownish regions limited to the polar areas and dark brown areas surrounding some vents. Terrain features observed include plains broken by scarps, isolated mountainous regions and volcanic vents resembling terrestrial caldera or pit craters. Maps of the distribution of these features, compiled by photogeological mapping techniques developed for terrestrial volcanic mapping, are presented, and the implications of the surface unit distributions for the volcanology, crustal composition, internal convection patterns and surface age of Io are discussed.

Masursky, H.↗
NASA NTRS2019

Jupiter's Turbulent Power Spectra from Hubble Space Telescope

Turbulence in Jupiter's atmosphere was investigated with archival and ongoing observations from the Hubble Space Telescope. Data sets that include one full rotation (360° longitude coverage) were used to produce complete maps of the planet's upper cloud layer. The global maps were analyzed to generate the passive tracer power spectrum of cloud features for single rotation observations, while successive rotations produced pairs of maps such that zonal winds were calculated. An atmosphere's dimensionality and dynamics are reflected in the slopes of such turbulent power spectra. Many of the retrieved passive tracer power spectra have a shallow spectral index over wave numbers k∼1 − 30 and transition to the well‐known Kolmogorov k(exp −5/3) relation at smaller scales between wave numbers k∼30 − 1,000. The transition scale is similar to the number of jets in Jupiter's zonal wind profile and is related to the Rhines scale and the beta effect induced anisotropy scale. We also report on differences found in anticyclonic and cyclonic shear region power spectra and how they correlate to latitudinal changes in the zonal wind profile. We found that properties of Jupiter's power spectra are consistent with quasi‐geostrophic turbulence for shallow fluids.

Richard G. Cosentino↗
NASA NTRS1981

Application of SEASAT-1 Synthetic Aperture Radar (SAR) data to enhance and detect geological lineaments and to assist LANDSAT landcover classification mapping

Digital SEASAT-1 synthetic aperture radar (SAR) data were used to enhance linear features to extract geologically significant lineaments in the Appalachian region. Comparison of Lineaments thus mapped with an existing lineament map based on LANDSAT MSS images shows that appropriately processed SEASAT-1 SAR data can significantly improve the detection of lineaments. Merge MSS and SAR data sets were more useful fo lineament detection and landcover classification than LANDSAT or SEASAT data alone. About 20 percent of the lineaments plotted from the SEASAT SAR image did not appear on the LANDSAT image. About 6 percent of minor lineaments or parts of lineaments present in the LANDSAT map were missing from the SEASAT map. Improvement in the landcover classification (acreage and spatial estimation accuracy) was attained by using MSS-SAR merged data. The aerial estimation of residential/built-up and forest categories was improved. Accuracy in estimating the agricultural and water categories was slightly reduced.

Sekhon, R.↗
NASA NTRS1974

An interdisciplinary analysis of multispectral satellite data for selected cover types in the Colorado mountains, using automatic data processing techniques

The author has identified the following significant results. In the San Juan Mountains there exists a group of structural and topographic features which suggest a common origin. The relative positions of the San Juan Depression with the Silverton and Lake City Calderas indicate they are possibly on the edge of a large circular feature. Comparison with the 1:250,000 scale Durango Geologic Map reveals a series of radial and arcuate faults concentric with the major circular feature. Such a fracture pattern implies that the circular feature may represent the extent of a major domal uplift in the area. The uplift was very likely due to the sub-crustal emplacement of the parent magma of the San Juan volcanics and intrusives. The broad doming led to the formation of a zone of tensional ring fractures which acted as conduits of release for the magma and the eventual development of the various calderas. The ring fracturing was probably incomplete with hinging occurring in the southern and southwestern portions of the dome accounting for the lack of development of caldera structures in that portion of the area.

Hoffer, R. M.↗
NASA NTRS1991

Imaging spectroscopy of Mars during 1990

Preliminary results are presented of observations of Mars using three telescopes and a CCD camera, grating-array spectrometers, and a near-IR array camera. Martian albedo features are shown to be similar in the visible and 1.3-3.5-micron range, and reflectances of nearly zero are noted in the image at 3.02 microns. The results demonstrate that these techniques provide effective maps of spatial variations in spectral absorption features caused by Martian atmospheric volatiles and by surface minerals.

Bell, James F., III↗
NASA NTRS1991

Far-ultraviolet mapping of the Cygnus Loop with the Voyager 2 Ultraviolet Spectrometer

FUV maps of the Cygnus Loop made using spectroscopic data from the Voyager 2 Ultraviolet Spectrometer are presented. Emission line features at about 980 and about 1035 A dominate the 500-1700 A spectra of the Cygnus Loop as observed with Voyager. Maps were generated in the light of these two features. The 980 and 1035 A maps are compared with X-ray and optical images of the Cygnus Loop that have been sampled in the same manner. From this comparison it is clear that the 980 A feature arises mainly from regions of bright optical emission, whereas the 1035 A emission more closely resembles the X-ray emission. This general impression can be confirmed by inspection of the spectra as a function of position. Spectra extracted from positions corresponding to the primary shock front show the 1035 A feature to be relatively strong, while the 980 A feature is brighter when substantial optical emission is present within the aperture.

Blair, William P.↗
NASA NTRS1977

Quaternary geologic map of Minnesota

The Quaternary Geologic Map of Minnesota is a compilation based both on the unique characteristics of satellite imagery and on the results of previous field investigations, both published and unpublished. The use of satellite imagery has made possible the timely and economical construction of this map. LANDSAT imagery interpretation proved more useful than expected. Most of the geologic units could be identified by extrapolating from specific sites where the geology had been investigated into areas where little was known. The excellent geographic registry coupled with the multi-spectral record of these images served to identify places where the geologic materials responded to their ecological environment and where the ecology responded to the geologic materials. Units were well located on the map at the scale selected for the study. Contacts between till units could be placed with reasonable accuracy. The reference points that were used to project delineations between units (rivers, lakes, hills, roads and other features), which had not been accurately located on early maps, could be accurately located with the help of the imagery. The tonal and color contrasts, the patterns reflecting geologic change and the resolution of the images permitted focusing attention on features which could be represented at the final scale of the map without distraction by other interesting but site-specific details.

Goebel, J. E.↗
NASA NTRS1979

New determinations of far-side lunar radii from Apollo photography

Determinations of far side lunar radii based on the reduction of photogrammetric measurements derived from Apollo 16 photographs obtained during the trans-earth phase of the spacecraft trajectory are presented. Reduction is accomplished by determining the Apollo 16 metric camera orientation relative to control points on the lunar surface whose coordinates are known exactly, than charting the surface on the basis of data coverage. The positions of 66 surface features in the area between longitudes 90 and 130 deg E and 10 and 60 deg N relative to the center of mass of the moon, with a relative accuracy of 500 km, are presented. A topographical map which can resolve basin-sized features has been derived from radius determinations. It is found that the craters Fabry, Riemann and Szilard comprise a topographically depressed region about 500 km in diameter with a floor 2.4 to 3.4 km below the 1730.0 km reference sphere and 4.8 to 5.8 km below the northern rim of the unfilled basin.

Mohan, S. N.↗
NASA NTRS1979

Efficient laser anemometer for intra-rotor flow mapping in turbomachinery

A fringe type laser anemometer is described. Features of the anemometer include; a rapid and efficient data acquisition process; a detailed real time graphic display of the data being accumulated; and input laser beam positioning that maximizes the size of the intrarotor region being mapped. Results are presented that demonstrate the anemometer's capability in flow mapping within a transonic axial flow compressor rotor. A velocity profile, derived from 30,000 measurements along 1000 sequential circumferential positions covering 20 blade passages, was obtained in 30 seconds. The use of fluorescent seed particles allowed flow measurements near the rotor hub and the casing window.

Powell, J. A.↗
NASA NTRS1993

Topographic mapping using radar interferometry - Processing techniques

In the summer of 1991 the NASA DC-8 airborne synthetic aperture radar (SAR) system acquired data with the radar configured in a C-band across-track interferometer mode. The data were processed to generate rectified topographic maps. A new processing scheme was developed featuring motion compensation, absolute phase retrieval, and three-dimensional 1ocation. The new processor has been tested using data which were acquired with extreme aircraft motion so that performance could be evaluated under adverse conditions. The topographic maps generated by the radar were compared to Digital Elevation Models (DEM's) derived using conventional optical stereo techniques. In one region we measured rms elevation deviations which were less than the specified DEM accuracy, and in the region covered by the more accurate DEM we found errors varying from 2.2 m rms in relatively flat terrain up to 5.0 m in mountainous areas. The rms difference between radar and DEM elevations over the 6.5 km by 22 km area covered by the more accurate DEM was 3.6 m.

Madsen, Soren N.↗