Search NASA⌕ Search

SEARCH · Search NASA

Results for “HOLLOW CATHODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

IMPROVED Co i log(gf) VALUES AND ABUNDANCE DETERMINATIONS IN THE PHOTOSPHERES OF THE SUN AND METAL-POOR STAR HD 84937

New emission branching fraction measurements for 898 lines of the first spectrum of cobalt (Co i) are determined from hollow cathode lamp spectra recorded with the National Solar Observatory 1 m Fourier transform spectrometer on Kitt Peak, AZ and a high-resolution echelle spectrometer. Published radiative lifetimes from laser induced fluorescence measurements are combined with the branching fractions to determine accurate absolute atomic transition probabilities for the 898 lines. Hyperfine structure (hfs) constants for levels of neutral Co in the literature are surveyed and selected values are used to generate complete hfs component patterns for 195 transitions of Co i. These new laboratory data are applied to determine the Co abundance in the Sun and metal-poor star HD 84937, yielding log ϵ(Co) = 4.955 ± 0.007 (σ = 0.059) based on 82 Co i lines and log ϵ(Co) = 2.785 ± 0.008 (σ = 0.065) based on 66 Co i lines, respectively. A Saha or ionization balance test on the photosphere of HD 84937 is performed using 16 UV lines of Co ii, and good agreement is found with the Co i result in this metal-poor ([Fe i/H] = −2.32, [Fe ii/H] = −2.32) dwarf star. The resulting value of [Co/Fe] = +0.14 supports a rise of Co/Fe at low metallicity that has been suggested in other studies.

79 ASTRONOMY AND ASTROPHYSICS↗

An overview of discharge plasma modeling for Hall effect thrusters

The current status and challenges of the discharge plasma modeling capabilities in Hall effect thrusters (HETs) are reviewed. Partially magnetized plasmas in HETs present unique physics in that collisions with neutral atoms (a feature of low-temperature plasmas) and instabilities and oscillations (a feature of high-temperature plasmas) coexist. A discharge plasma model is constructed by choosing the numerical methods, e.g. fluid or kinetic, for individual plasma constituents, including neutral atoms, ions, and electrons. The governing equations, boundary conditions, and collision models of a xenon discharge plasma in HETs are discussed. Various models are used to illustrate device-scale phenomena, including the breathing mode and azimuthally rotating spokes, as well as small-scale physics, such as the electron cyclotron drift instability and current-carrying instability that may occur in a hollow cathode plume.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser spectroscopy of metastable palladium at 340 and 363 nm

Here we report measurements of the isotope shift of the mass 104, 105, 106, 108, and 110 stable palladium isotopes for transitions from the metastable state $4d^9(^2D_{5/2})5s$, $^2[5/2]_3 → 4d^9(^2D_{5/2})5p, ^2[7/2]^o_4$ at 340 nm, and $4d^9(^2D_{5/2})5_s, ^2[5/2]_3 → 4d^9(^2D_{5/2})5p, ^2[3/2]^o_2$ at 363 nm. For 105 Pd , we determine the hyperfine structure of both transitions. The measurements were performed by saturation absorption spectroscopy in a custom-built hollow cathode lamp and will serve as a reference for collinear laser spectroscopy of short-lived neutron-rich palladium isotopes. We also report on the observation of a population inversion for the 363-nm transition under certain discharge conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Research and Development to Reduce Impurity Production and Transport of the Impurities to the Target in Linear Plasma Devices Using Helicon Plasma Sources

Linear plasma devices used to test plasma facing materials (PFMs) and components for fusion reactors are often suffering under the production of intrinsic impurities from the plasma source system. Most linear plasma devices use internal electrodes (hollow cathodes, reflex arc, or cascading arc), which typically are the source of the main impurities. The next-generation plasma generators use radio frequency (RF) plasma sources like helicons to avoid internal electrodes. However, high power operation of helicons has proven to result in impurity production due to the high rectified sheath voltages created. Depending on the plasma parameters and magnetic configuration, these impurities can be transported to the target and deposited there to unacceptable high levels. Here, in this contribution, the experimental results from Proto-MPEX are summarized, and the conclusions of the impurity source physics are given. Methods to reduce the impurity production, the impurity transport, and the net deposition on the target are presented. These methods to reduce the impurity production include Faraday screens to reduce the sheath voltage drop, high-Z refractory coatings to reduce the erosion yield, and wall conditioning methods. Methods to reduce the impurity transport include changes in the magnetic configuration as well as electron heating to change axial and radial temperature profiles. Preliminary results on the effectiveness of some of these methods are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Compact, single mode, frequency stabilized laser spectroscopy sources for isotope analysis

We will discuss here ultra-stable narrow line-width Hybrid External Cavity Lasers (HECL) of visible spectrum. The customer requires ~ 2 MHz linewidth / stability (2.7 fm). It is our goal to design the most stable possible ECL, and then enhance its long-term stability by disciplining it to an atomic wavelength reference. Protection against long-term drift can be provided by calibrating HECL wavelength to a hollow-cathode lamp (HCL) standard using the optogalvanic effect to adjust the HECL set-point. Here we report the short-term stability of the HECL alone, i.e., without the discipline of an atomic wavelength reference. For this purpose, we have studied HECLs operating at 405 nm and at 638 nm. We will interpret their performance in terms of the customer’s need for 600 – 700 nm narrow-linewidth spectroscopy. We selected to perform the portion of the work at 405 nm since the sensitivity to cavity stability is ~2x compared with operating in the 600 – 700 nm wavelength range. Further, we will show excellent wavelength stability over time at 638 nm. The two main ECL components are the semiconductor laser chip, including a high reflectivity (HR) mirror, and a volume Bragg grating (VBG) that provides output coupling. Between them is collimating optics. The theoretical analysis and experimental data suggest that control of ECL wavelength in the femtometer wavelength range can be achieved over short-term time scales by carefully controlling both the temperature and very high current stability. From the results presented here temperature control of the laser to 0.001° C along with current stability of 0.001 mA will be needed in a sensor instrument. Finally, we show a path to achieve 2 MHz short-term stability at 600 to 700 nm.

07 ISOTOPE AND RADIATION SOURCES↗

Amorphous Carbon Coatings with Controlled Density and Composition

Inertial confinement fusion (ICF) experiments rely on the compression of a spherical capsule containing tritium and deuterium fuel as a way to achieve thermonuclear fusion. Rapid ablation of the capsule surface produces the reactive force that compresses the capsule. Carbon-based capsule materials currently used include low density glow discharge polymer (GDP) and polycrystalline diamond. An ideal capsule material would have the high density of diamond, with the amorphous nature of GDP, which would reduce asymmetries during compression caused by a random crystalline structure. An intermediate material, diamond-like carbon (DLC), has an amorphous structure, and densities between GDP and diamond, but has been difficult to produce with low stress and low impurity levels. The goal of this Feasibility Study was to investigate the practicality of using a magnetically enhanced, hollow-cathode, plasma source to produce thick (50-200 µm), low-stress, diamond-like carbon films for ICF ablator applications. The coatings produced during the course of this work have been shown to be amorphous, to have a higher density than traditional GDP ablators (1.6-1.7 g/cc), to have low stress (67-113 MPa), and can be deposited at the high thicknesses required for ICF capsule requirements. Atomic-force microscopy on a 45-micron-thick coating also measured the films to have grain sizes on the order of 20 nanometers, and a root-mean squared surface roughness of 0.5 nanometers.

36 MATERIALS SCIENCE↗

Fabricating Diamond-like Amorphous Carbon

Using a magnetically confined hot hollow cathode PE-CVD, hydrocarbon gas is decomposed under a diluent gas to deposit hydrogenated amorphous carbon onto a sample holder. During the fabrication of the hydrogenated amorphous carbon, the electric potential, electron temperature, and electron density of the plasma are measured with a Langmuir probe. Raman spectroscopy is used to determine the structural and electronic characterization of the final hydrogenated amorphous carbon solid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Research and advanced concepts

Hollow cathode operation and plasma discharge in mercury ion engine, potential distribution of glow discharge, and liquid metal MHD power conversion

Source record↗

Improved electron emitter

Emitter applies to devices in which a plasma is generated by electron bombardment. Device is conventional hollow cathode modified by addition of integral keeper cap containing small aperture which encloses outlet of the cathode and is held in position by ceramic tube.

Nakanishi, S.↗

Characteristics of the optical radiation from Kaufman thrusters

The optical radiation from plasma discharges of electron-bombardment mercury-ion thrusters was investigated. Spectrographic measurements indicated that the discharge was composed primarily of mercury atoms and singly charged ions. Excitation spectra of doubly charged mercury ions was measured to obtain the fraction of such ions in the discharge. Accomplishments of spectroscopic measurements of a hollow cathode thruster included the identification of two diagnostic lines in the mercury spectrum and the interpretation of the spectral amplitudes in terms of a superposition of primary and Maxwellian electron distributions. Potential application of optical techniques to thruster control applications was also suggested by the measurements.

Milder, N. L.↗

Performance of a neutralizer for electron bombardment thruster

Results of the SERT II flight indicate that the hollow cathode neutralizer not only represents a power and propellant weight penalty but can be a contributing cause to accelerator grid erosion. Tests with a 30-cm diameter thruster show that a neutralizer position of approximately 9 cm axially downstream of the accelerator grid and approximately 9 cm radially away from the outer edge of the accelerator grid and pointing parallel to the thruster axis provides the best overall performance. The estimated grid wear rate was less than 0.08 mm in 10,000 hours. The coupling voltage was approximately 17 volts at a neutralizer flow rate of 22 equivalent milliamperes of mercury and a beam current of 1.5 amperes. Neutralizer power was 31 watts and the effect of neutralizer flow on overall propellant utilization efficiency is a 1.2 percentage point reduction at a thruster utilization efficiency of 90 percent. The neutralizer position defined in tests with a 30 cm thruster was tested with a 15 cm SERT II thruster. When the neutralizer was relocated further downstream with this different orientation, accelerator impingement current due to neutralizer operation was reduced by approximately a factor of seven and was nearly independent of neutralizer operation.

Bechtel, R. T.↗