Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Entropy Alloys”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Semiconducting High-Entropy Chalcogenide Alloys with Ambi-ionic Entropy Stabilization and Ambipolar Doping

Entropy stabilization is a novel materials-design paradigm to realize new compounds with widely tunable properties. However, almost all entropy-stabilized materials so far are either conducting metals or insulating ceramics, with a clear dearth in the semiconducting regime. Here, a new class of the multi-cationic and -anionic entropy-stabilized chalcogenide alloys based on the (Ge,Sn,Pb)(S,Se,Te) formula are synthesized and characterized experimentally. The con-figurational entropy from the disorder of both the anion and the cation sublattices reaches a record value of ~2.2 R mol -1 for the equimolar composition and stabilizes the single-phase solid solution. Theoretical calculations and experiments both show that the synthesized alloys are thermodynamically stable at the growth temperature and kinetically metastable at room temperature, segregating by spinodal decomposition at moderate temperatures. In conclusion, doping and electronic transport measurements verify that the synthesized materials are ambipolarly dopable semiconductors, which paves the way for the wider adoption of entropy-stabilized chalcogenide alloys in functional applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Toughening materials: enhancing resistance to fracture

It has been said that ‘God invented plasticity, but the Devil invented fracture!’ Both mechanisms represent the two prime modes of structural failure, respectively, plastic collapse and the rupture/breaking of a component, but the concept of developing materials with enhanced resistance to fracture can be difficult. This is because fracture resistance invariably involves a compromise—between strength and ductility, between strength and toughness—fundamentally leading to a ‘conflict’ between nano-/micro-structural damage and the mechanisms of toughening. Here, we examine the two major classes of such toughening: (i) intrinsic toughening, which occurs ahead of a crack tip and is motivated by plasticity—this is the principal mode of fracture resistance in ductile materials, and (ii) extrinsic toughening, which occurs at, or in the wake of, a crack tip and is associated with crack-tip shielding—this is generally the sole mode of fracture resistance in brittle materials. We briefly examine how these distinct mechanistic processes have been used to toughen synthetic materials—intrinsically in gradient materials and in multiple principal-element metallic alloys with the example of metallic glasses and high-entropy alloys, and extrinsically in ceramics with the example of ceramic-matrix composites—in comparison to Nature which has been especially adept in creating biological/natural materials which are toughened by one or both mechanistic classes, despite often consisting of constituents with meagre mechanical properties. The success of Nature has been driven by its ability to cultivate the development of materials with multiple length-scale hierarchical structures that display ingenious gradients and structural adaptability, a philosophy which we need to emulate and more importantly learn to synthesize to make structural materials of the future with unprecedented combinations of mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An innovative radial gradient material design using hot isostatic pressing for applications in extreme environments

Functionally graded materials (FGMs) are highly advanced continuous or discontinuous structures whose structural and material properties vary along a singular geometric dimension either in the axial or radial direction. Here, the radial gradient FGM design makes for an optimal structural design to incorporate a bi-metallic structure with a copper-based high entropy alloy (Cu-HEA) with good mechanical properties and high irradiation resistance, and Chromium (Cr) with great corrosion resistance. This study focuses on the experimental design of a metal powder loading mechanism to fabricate a bi-metallic radial gradient structure using Cu-HEA and 99.9 % pure Cr metal powders. The powder loading strategy uses custom-designed concentric cylindrical dividers to separate the individual compositions. Two benchtop trial runs were performed for design optimization. The optimized design was then implemented to eventually load the HEA and Cr powders for consolidation via powder metallurgy hot isostatic pressing (PM-HIP). The electron microscopy analysis reveals the successful fabrication of the radial gradient structure with the chemical mapping analysis, demonstrating the gradual composition shift from the HEA at the center to the pure-Cr at the periphery via a three-step gradient.

High Entropy Alloys (HEAs)↗
DOE OSTI2022

Effect of atomic size mismatch and chemical complexity on the local lattice distortion of BCC solid solution alloys

Here, the effects of atomic size mismatch and chemical complexity on the local lattice distortion of solid-solution alloys VNbTa, TiVNbMo, TiVNbMoTa and TiVNbMoTaWRe with body-centered cubic (BCC) structure are quantitatively studied with time-of-flight neutron total scattering, extended X-ray absorption fine structure (EXAFS) measurements and first principles calculations. Neutron atomic pair distribution function (PDF) measurements found that the local lattice distortion in the ternary solid-solution alloy VNbTa is 1.1 %, obviously larger than that of the most complicated solid-solution alloy (0.27% for TiVNbMoTaWRe). Our results suggested that atomic size mismatch in high entropy alloys is more critical to the local lattice distortion than chemical complexity. Both EXAFS analysis and theoretical calculations indicate that there is a maximum of ~4 % difference between the bonding length of different atomic pairs in VNbTa.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Kink bands promote exceptional fracture resistance in a NbTaTiHf refractory medium-entropy alloy

Single-phase body-centered cubic (bcc) refractory medium- or high-entropy alloys can retain compressive strength at elevated temperatures but suffer from extremely low tensile ductility and fracture toughness. We examined the strength and fracture toughness of a bcc refractory alloy, NbTaTiHf, from 77 to 1473 kelvin. This alloy’s behavior differed from that of comparable systems by having fracture toughness over 253 MPa·m 1/2 , which we attribute to a dynamic competition between screw and edge dislocations in controlling the plasticity at a crack tip. Whereas the glide and intersection of screw and mixed dislocations promotes strain hardening controlling uniform deformation, the coordinated slip of <111> edge dislocations with {110} and {112} glide planes prolongs nonuniform strain through formation of kink bands. These bands suppress strain hardening by reorienting microscale bands of the crystal along directions of higher resolved shear stress and continually nucleate to accommodate localized strain and distribute damage away from a crack tip.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Solid state welding of medium-entropy CrCoNi with heterogeneous, partially recrystallized microstructures

We report that heterogeneous, partially recrystallized (PRX) microstructures have recently been used to improve strength-ductility combinations in high-entropy alloys. However, these microstructures are incompatible with conventional joining processes that require melting or prolonged exposure to elevated temperatures. This work presents an initial exploration of solid state joining in this challenging condition using vaporizing foil actuator welding (VFAW) applied to PRX equiatomic alloy CrCoNi.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hydrogen and water interactions with CrMnFeCoNi alloy from density functional theory calculations

High entropy alloys (HEAs) are a promising class of materials with remarkable mechanical and catalytic properties. Among these, the quinary CrMnFeCoNi alloy (also called “Cantor alloy”) has attracted considerable attention given its thermodynamic stability and remarkable mechanical properties under different temperatures. Given that various degradation mechanisms involve multiple contaminants, such as hydrogen and water in hydrogen embrittlement and surface poisoning, respectively, understanding their interactions with the Cantor alloy is critical for its practical applications as structural, nuclear, or hydrogen storage material. In this work, we perform first-principles calculations based on Density Functional Theory (DFT) to investigate such interactions when considering various microstructures, including bulk materials and those containing certain defects, such as grain boundaries, stacking faults, and vacancies. We also employ Global Sensitivity Analysis to identify the importance of different factors in the stability of the impurities. We find that the accuracy of the H formation energy is significantly affected by spin polarization and chemical short-range order. The study also identifies a strong tendency for hydrogen interstitials to segregate to Σ5(210)/[001] symmetric tilt grain boundary, even when H concentrations are high, suggesting that a certain type of grain boundaries acts as H sinks within the alloy. Further, this result is reinforced by the low formation energy of vacancy-hydrogen complexes, which can contain multiple hydrogen atoms. Finally, the surface reactivity analysis reveals that the adsorption energy of oxygen and hydroxyl groups is highly sensitive to the specific metal atom involved in the binding, with a clear preference for chromium atoms, which could have implications for the alloy’s oxidation and corrosion behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Joining Study for Formed Plate Heat Exchangers (CRADA Final Report)

Plate heat exchangers (PHEs) have been used in numerous industrial applications, such as HVAC systems, power generation, transportation and manufacturing. The performance of plate heat exchangers is frequently undermined by corrosion, fouling, and scaling. These phenomena not only diminish heat transfer efficiency but also lead to increased operational costs, maintenance demands, and reduced equipment lifespan. In this project, the team addressed the widespread challenges of corrosion, fouling, and scaling, and explored alternative material solutions. While commonly used materials like stainless steel and titanium offer notable benefits, they can still experience corrosion under certain operating conditions. The advancement of new materials and surface engineering technologies, such as advanced coating, ceramics, composites materials, and high entropy alloys are promising for can help solve these issues, enable longer lifetime and high performance of plate heat exchangers.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Final Scientific/Technical Report Rapid Design and Manufacturing of High-Performance Materials for Turbine Blades

This research demonstrated the concept of carbide precipitation-strengthened refractory high entropy alloys (RHEA). The advantage of a precipitation strengthened alloy is all phases are in thermodynamic equilibrium promoting microstructural stability, and consequently retention of properties at elevated temperatures. Additionally, as with any precipitation strengthened – or age hardened alloy, components can be heat-treated after manufacturing to manipulate the microstructure and optimize properties for performance. This is an advantage of the precipitation strengthened alloys over composites and ceramics materials, where the microstructure and properties are essentially fixed upon the initial materials manufacturing stage. High throughput (HT), multi-scale computer modeling was used to identifying novel RHEA compositions with desired characteristics needed for precipitation strengthening. The results showed that carbides precipitated and consequently, the strength of the alloys (measured in compression) increased after heat-treatment, which is the desired effect. The project also demonstrated the feasibility of producing articles from RHEA by additive manufacturing (AM).

36 MATERIALS SCIENCE↗
DOE OSTI2021

2D High‐Entropy Transition Metal Dichalcogenides for Carbon Dioxide Electrocatalysis

Abstract High‐entropy alloys combine multiple principal elements at a near equal fraction to form vast compositional spaces to achieve outstanding functionalities that are absent in alloys with one or two principal elements. Here, the prediction, synthesis, and multiscale characterization of 2D high‐entropy transition metal dichalcogenide (TMDC) alloys with four/five transition metals is reported. Of these, the electrochemical performance of a five‐component alloy with the highest configurational entropy, (MoWVNbTa)S 2 , is investigated for CO 2 conversion to CO, revealing an excellent current density of 0.51 A cm −2 and a turnover frequency of 58.3 s −1 at ≈ −0.8 V versus reversible hydrogen electrode. First‐principles calculations show that the superior CO 2 electroreduction is due to a multi‐site catalysis wherein the atomic‐scale disorder optimizes the rate‐limiting step of CO desorption by facilitating isolated transition metal edge sites with weak CO binding. 2D high‐entropy TMDC alloys provide a materials platform to design superior catalysts for many electrochemical systems.

Cavin, John↗
DOE OSTI2024

Ab initio property predictions of quinary solid solutions using small binary cells

The Set of Small Ordered Structures (SSOS) approach is an ab initio technique for modelling random solid solutions in which many small structures are averaged so that their correlation functions match those of a desired composition. SSOS has been shown to be effective in reducing the cost of density functional theory calculations relative to other well-known techniques such as cluster expansions and special quasirandom structures for modelling solid solutions. Here in this work, we demonstrate that SSOS’s can be constructed using cells with only a subset of elements while still accurately modelling multi-component systems. Specifically, we show that small binary cells can effectively model two quinary high entropy alloys – NbTaTiHfZr and MoNbTaVW – accurately capturing properties such as formation energy, lattice parameters, elastic constants, and root-mean-square atomic displacements. Overall, this insight is useful for those looking to construct databases of such small structures for predicting the properties of multi-component solid solutions, as it greatly decreases the number of structures that needs to be considered.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Theory-guided design of duplex-phase multi-principal-element alloys

Density-functional theory (DFT) is used to identify phase-equilibria in multi-principal-element and high-entropy alloys (MPEAs/HEAs), including duplex-phase and eutectic microstructures. Here, a combination of composition-dependent formation energy and electronic-structure-based ordering parameters were used to identify a transition from FCC to BCC favoring mixtures, and these predictions experimentally validated in the Al-Co-Cr-Cu-Fe-Ni system. A sharp crossover in lattice structure and dual-phase stability as a function of composition were predicted via DFT and validated experimentally. The impact of solidification kinetics and thermodynamic stability was explored experimentally using a range of techniques, from slow (castings) to rapid (laser remelting), which showed a decoupling of phase fraction from thermal history, i.e., phase fraction was found to be solidification rate-independent, enabling tuning of a multi-modal cell and grain size ranging from nanoscale through macroscale. Strength and ductility tradeoffs for select processing parameters were investigated via uniaxial tension and small-punch testing on specimens manufactured via powder-based additive manufacturing (directed-energy deposition). This work establishes a pathway for design and optimization of next-generation multiphase superalloys via tailoring of structural and chemical ordering in concentrated solid solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Mechanical and Microstructural Study of Neutron-Irradiated Novel Alloy Systems

Generation IV nuclear reactors require structural materials capable of withstanding high temperatures, corrosion, and radiation damage. Refractory high entropy alloys (RHEAs) show potential due to their resistance to irradiation damage, reduced void swelling, and microstructural stability. However, most previous studies have focused on thin films and ion irradiation, leaving the neutron irradiation response of bulk RHEAs largely unexplored. Mechanical behavior results show brittle behavior before and after irradiation. The addition of Zr led to an increase in hardness due to Zr-rich precipitates in the bulk microstructure. Lastly, hardness results showed an increase in hardening after irradiation indicating irradiation induced hardening has occurred.

36 - MATERIALS SCIENCE↗
DOE OSTI2021

Machine-Learning Microstructure for Inverse Material Design

Metallurgy and material design have thousands of years’ history and have played a critical role in the civilization process of humankind. The traditional trial-and-error method has been unprecedentedly challenged in the modern era when the number of components and phases in novel alloys keeps increasing, with high-entropy alloys as the representative. New opportunities emerge for alloy design in the artificial intelligence era. Here a successful machine-learning (ML) method is developed to identify the microstructure images with eye-challenging morphology for a number of martensitic and ferritic steels. Assisted by it, a new neural-network method is proposed for the inverse design of alloys with 20 components, which can accelerate the design process based on microstructure. The method is also readily applied to other material systems given sufficient microstructure images. This work lays the foundation for inverse alloy design based on microstructure images with extremely similar features.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Harnessing metastability for grain size control in multiprincipal element alloys during additive manufacturing

Abstract Controlling microstructure in fusion-based metal additive manufacturing (AM) remains a significant challenge due to the many parameters that directly impact solidification condition. Multiprincipal element alloys (MPEAs), also known as high entropy alloys, offer a vast compositional space to design for microstructural engineering due to their chemical complexity and exceptional properties. Here, we use the FeMnCoCr system as a model platform for exploring alloy design in MPEAs for AM. By exploiting the decreasing stability of the face-centered cubic phase with increasing Mn content, we achieve notable grain refinement and breakdown of epitaxial columnar grain growth. We employ a multifaceted approach encompassing thermodynamic modeling, operando synchrotron X-ray diffraction, multiscale microstructural characterization, and mechanical testing to gain insight into the solidification physics and its ramifications on the resulting microstructure of FeMnCoCr MPEAs. This work aims toward tailoring desirable grain sizes and morphology through targeted manipulation of phase stability, thereby advancing microstructure control in AM applications.

Wakai, Akane↗
DOE OSTI2021

Theoretical investigation of surface chemical reactivity of compositionally disordered multi-metallic alloys

Alloys are widely used in both academic and industrial research as heterogeneous catalysts for accelerating technologically important reactions ranging from hydrocarbon reforming, selective hydrogenation, to electrochemical reactions involving hydrogen and oxygen that are fundamental and indispensable to a sustainable future energy infrastructure. Most basic catalysis research has been limited to combinations of two elements that are usually ordered in some manner at the nanoscale because doing so allows observable results to be easily rationalized. It however leaves a huge material space consisting of multi metallic, compositionally disordered alloys unexplored. This research demonstrates a viable theoretical approach combining different types of first principles calculations (including Green’s function-based Korringa–Kohn–Rostoker coherent potential approximation (KKR–CPA) and planewave-based density functional theory) to enable the surface chemical reactivity of compositionally complex alloy surfaces to be investigated. We demonstrate the approach by investigating hydrogen adsorption and evolution on two types of compositionally disordered alloys: a quaternary CoCrFeNi high-entropy alloy, and binary Pt-3d base metal alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

ADDITIVE MANUFACTURING OF REFRACTORY ALLOYS

Refractory alloys are known for their high temperature capabilities and are intended for use at ultra-high temperatures above even 1200°C, which exceeds the capabilities of conventional superalloys. Additive manufacturing (AM) is an attractive alternative processing route because refractory alloys are difficult to fabricate through traditional methods; AM can form a near net-shape part with a tailored microstructure. This work seeks to evaluate the solidification behavior of refractory alloys under AM conditions and establish corresponding solidification models. Two binary alloys, Mo30Nb and Nb7.5Ta, as well as the commercial Nb alloy, C103, and one refractory high entropy alloy (RHEA), MoNbTaTi, were subjected to single track melts in a laser powder bed fusion (LPBF) machine. Each melt track was evaluated in the scanning electron microscope (SEM), which determined that some AM conditions used led to non-ideal behavior. Electron backscatter diffraction (EBSD) revealed that the Nb7.5Ta, C103, and MoNbTaTi all exhibited new grain nucleation to various extents while the Mo30Nb exhibited primarily epitaxial growth. This was found to be inconsistent with solidification models that were developed for each alloy and each set of AM conditions to predict the columnar to equiaxed transition behavior (CET) of the experimental microstructures. This disparity was largely attributed to the input parameters for the solidification model, which were developed using Thermo-Calc and SYSWELD. These input parameters include the alloy specific Gibbs-Thomson coefficient and thermophysical properties, the solute specific liquidus slopes and partitioning coefficients, as well as the process specific thermal gradients. Each input parameter was evaluated to determine the likely changes required for the modeled values to generate solidification models that better correspond to what was observed experimentally.

Miklas, Abigail↗