Search NASA⌕ Search

SEARCH · Search NASA

Results for “Human Reliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Next manned transportation system

Avionics is the connecting link that integrates the hardware and software which satisfy systems requirements. Issues of the next manned transportation system are outlined: STS evolution; personnel launch system (PLS) sizing issues and constraints; PLS thermal protection system; PLS launch vehicle concepts; reliability and safety; advanced launch systems (ALS); near-term issues; avionics requirements; guideline to reduce operational costs; and critical human factors design considerations.

Erwin, Harry↗
NASA NTRS1992

Future needs for space robots for SEI

High level systems engineering modeling and analysis activities for the Space Exploration Initiative (SEI) are reviewed, with emphasis on planet surface systems. Particular attention is given to SEI studies, preliminary space robotic system requirements, and usefulness of space robotic systems developed to operate on planetary surfaces on earth. It is concluded that supervised intelligent systems on the planet surfaces are necessary to make SEI planet surface activities reliable and productive and encompass capabilities for control and monitoring of all elements, including supervised autonomous robotic systems. Amplification of human capabilities due to applying more knowledge and reasoning in more flexible and appropriate ways than conventional automation approaches will provide more robust performance, greater choice of interaction modes with operators, and greater transparency of operation.

Erickson, Jon D.↗
NASA NTRS2002

High performance liquid chromatographic assay for the quantitation of total glutathione in plasma

A simple and widely used homocysteine HPLC procedure was applied for the HPLC identification and quantitation of glutathione in plasma. The method, which utilizes SBDF as a derivatizing agent utilizes only 50 microl of sample volume. Linear quantitative response curve was generated for glutathione over a concentration range of 0.3125-62.50 micromol/l. Linear regression analysis of the standard curve exhibited correlation coefficient of 0.999. Limit of detection (LOD) and limit of quantitation (LOQ) values were 5.0 and 15 pmol, respectively. Glutathione recovery using this method was nearly complete (above 96%). Intra-assay and inter-assay precision studies reflected a high level of reliability and reproducibility of the method. The applicability of the method for the quantitation of glutathione was demonstrated successfully using human and rat plasma samples.

Non-NASA Center↗
NASA NTRS2010

KSC/IT Knowledge Sharing With JAXA/IT

The mission of NASA IT [organizations throughout the Agency] is to increase the productivity of scientists, engineers, and mission support personnel by responsively and efficiently delivering reliable, innovative and secure IT services. (http://insidenasa.nasa.gov/ocio/about/index.html, July 2010) IT at NASA/KSC serves to enable KSC's mission (Human Space Flight) in a customer-focused manner by offering a breadth of IT services to support the current and advanced information technology and communications needs of KSC institutional and NASA/KSC program customers.

Turner, Stacie↗
NASA NTRS2005

Range Systems Simulation for the NASA Shuttle: Emphasis on Disaster and Prevention Management During Lift-Off

This article describes a decision-making system composed of a number of safety and environmental models for the launch phase of a NASA Space Shuttle mission. The components of this distributed simulation environment represent the different systems that must collaborate to establish the Expectation of Casualties (E(sub c)) caused by a failed Space Shuttle launch and subsequent explosion (accidental or instructed) of the spacecraft shortly after liftoff. This decision-making tool employs Space Shuttle reliability models, trajectory models, a blast model, weather dissemination systems, population models, amount and type of toxicants, gas dispersion models, human response functions to toxicants, and a geographical information system. Since one of the important features of this proposed simulation environment is to measure blast, toxic, and debris effects, the clear benefits is that it can help safety managers not only estimate the population at risk, but also to help plan evacuations, make sheltering decisions, establish the resources required to provide aid and comfort, and mitigate damages in case of a disaster.

Rabelo, Lisa↗
NASA NTRS2016

Testing of Synthetic Biological Membranes for Forward Osmosis Applications

Commercially available forward osmosis membranes have been extensively tested for human space flight wastewater treatment. Despite the improvements achieved in the last decades, there is still a challenge to produce reliable membranes with anti-fouling properties, chemical resistance, and high flux and selectivity. Synthetic biological membranes that mimic the ones present in nature, which underwent millions of years of evolution, represent a potential solution for further development and progress in membrane technology. Biomimetic forward osmosis membranes based on a polymeric support filter and coated with surfactant multilayers have been engineered to investigate how different manufacturing processes impact the performance and structure of the membrane. However, initial results of the first generation prototype membranes tests reveal a high scatter in the data, due to the current testing apparatus set up. The testing apparatus has been upgraded to improve data collection, reduce errors, and to allow higher control of the testing process.

Forward osmosis↗
NASA NTRSDate not supplied

Using Systems Engineering to Develop an Integrated Crew Health and Performance System to Mitigate Risk for Human Exploration Missions

New space exploration missions are currently being designed to take humanity beyond low Earth orbit (LEO) to cis-lunar space, the lunar surface, and eventually to Mars. These missions carry increased risks due to a number of factors, including distance from Earth, exposure to deep space hazards, reduced capacity and ability to resupply and evacuate, and increased communication delays. As distance from Earth grows and mission length increases, a growing proportion of mission risk can be attributed to the “human system.” Almost twenty years ago, the Institute of Medicine in the United States recommended the early and complete integration of the human system into the spacecraft and mission design process to mitigate this increased risk inherent in exploration missions. Exploration missions will require increasing levels of crew self-sufficiency that will challenge the current operational paradigms established in LEO. Enabling progressive Earth independence requires management of the increasingly complex interactions among spacecraft systems and integration of all the data and functions that affect human health and performance into one coordinated system –the Crew Health and Performance (CHP) system. This system is a critical spacecraft system that is analogous to other systems such as propulsion, guidance and navigation, or avionics. Design and integration of the CHP system requires the evidence-based merger of typically disparate disciplines such as medicine, human factors, and life support system design, using systems engineering (SE) practices. SE provides traceability of spacecraft requirements and enables reliable and repeatable trade space analysis of the many competing options for hardware and software to be included in the mission architecture. The approach described here enables spacecraft and mission designers to align the scope of a CHP system with mission specific requirements, decrease risk to the crew, and increase the probability of mission success.

Kerry McGuire↗
NASA NTRS2022

Western Montana Ecological Forecasting II: Enhancing Habitat Suitability Modeling of Mustelid Species and Contaminant Monitoring in Northern Montana Using NASA Earth Observations

Environmental contaminants in aquatic ecosystems threaten both human and ecosystem health. Western Montana’s rivers possess great economic and ecological value, yet the status of contaminants in these systems can be unclear. Contaminants such as brominated flame-retardants, heavy metals, and pharmaceuticals negatively affect ecosystem health by traveling through the food chain and bioaccumulating in apex predators. Exposure to these contaminants can result in neurological, endocrine, and reproductive impairments in wildlife and humans. American mink (Neovison vison) and North American river otter (Lontra canadensis) have a predominantly aquatic diet and serve as reliable indicator species of environmental health. Working Dogs for Conservation (WD4C) uses detection dogs to locate scat samples of these species which are assessed for contaminants by the Virginia Institute of Marine Science (VIMS). With Software for Assisted Habitat Modeling (SAHM), the team generated current (2013-2020) and projected (2021-2040) habitat suitability models for mink and otter utilizing NASA Earth observations from Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Global Precipitation Measurement Integrated Multi-Satellite Retrievals for GPM (GPM IMERG), Shuttle Radar Topography Mission (SRTM), and Soil Moisture Active Passive (SMAP). The habitat suitability maps’ study region encompassed Flathead National Forest and Blackfeet Indian Reservation. Additionally, the team created site accessibility and precipitation anomaly maps that display the viability of survey locations. The current habitat suitability models performed well (AUC-PR=0.88). The most important predictor variables for suitable habitat were distance to rivers, elevation, and land cover. These end products will further inform WD4C survey site selection and contaminant monitoring.

Chelsea Morton↗
NASA NTRSDate not supplied

Detectability of anthropogenic impacts on terrestrial carbon storage through space-based greenhouse gas observations

While changes in human activity and their impact on the terrestrial biosphere may be apparent in inventory and land-surface satellite data, reliably matching these changes to signals in atmospheric greenhouse gases remains challenging. The dominant signals in atmospheric carbon dioxide (CO2) are those of the seasonal and diurnal variability of the terrestrial biosphere. As a result, the historically large short-term change in anthropogenic fossil fuel emissions due to COVID-19 produced an atmospheric CO2 signal near the threshold of detectability of the current space-based observing system. Impacts of anthropogenic activity on terrestrial carbon storage are likewise expected to be difficult, if not impossible, to detect and validate with atmospheric observations. For example, many forest management projects involve reduction of wood removals that would otherwise be taken off site and decompose years later and are thus not reflected in immediate onsite carbon fluxes. Nevertheless, changes implemented over a jurisdictional scale, as opposed to individual projects, may be detectable. This presentation will analyze to what extent NASA’s Goddard Earth Observing System (GEOS)/Orbiting Carbon Observatory 2 (OCO-2) assimilated column CO2 (XCO2) product is able to detect anthropogenic changes to terrestrial carbon storage and the results of several simulation experiments meant to represent potential forest management scenarios. As examples, we consider past and future changes due to conversion in the Tropics to agricultural land use from slash-and-burn, e.g., from Reducing emissions from deforestation and forest degradation in developing countries (REDD+) efforts. This has the potential to inform what practices may be observable with current and future technology, e.g., Europe’s upcoming CO2 monitoring mission (CO2M), and where improvement is needed.

Brad Weir↗
NASA NTRS2007

Nuclear Thermal Propulsion Mars Mission Systems Analysis and Requirements Definition

This paper describes the Mars transportation vehicle design concepts developed by the Marshall Space Flight Center (MSFC) Advanced Concepts Office. These vehicle design concepts provide an indication of the most demanding and least demanding potential requirements for nuclear thermal propulsion systems for human Mars exploration missions from years 2025 to 2035. Vehicle concept options vary from large "all-up" vehicle configurations that would transport all of the elements for a Mars mission on one vehicle. to "split" mission vehicle configurations that would consist of separate smaller vehicles that would transport cargo elements and human crew elements to Mars separately. Parametric trades and sensitivity studies show NTP stage and engine design options that provide the best balanced set of metrics based on safety, reliability, performance, cost and mission objectives. Trade studies include the sensitivity of vehicle performance to nuclear engine characteristics such as thrust, specific impulse and nuclear reactor type. Tbe associated system requirements are aligned with the NASA Exploration Systems Mission Directorate (ESMD) Reference Mars mission as described in the Explorations Systems Architecture Study (ESAS) report. The focused trade studies include a detailed analysis of nuclear engine radiation shield requirements for human missions and analysis of nuclear thermal engine design options for the ESAS reference mission.

Mulqueen, Jack↗
NASA NTRS1990

Regional climate change predictions from the Goddard Institute for Space Studies high resolution GCM

Model simulations of global climate change are seen as an essential component of any program aimed at understanding human impact on the global environment. A major weakness of current general circulation models (GCMs), however, is their inability to predict reliably the regional consequences of a global scale change, and it is these regional scale predictions that are necessary for studies of human/environmental response. This research is directed toward the development of a methodology for the validation of the synoptic scale climatology of GCMs. This is developed with regard to the Goddard Institute for Space Studies (GISS) GCM Model 2, with the specific objective of using the synoptic circulation form a doubles CO2 simulation to estimate regional climate change over North America, south of Hudson Bay. This progress report is specifically concerned with validating the synoptic climatology of the GISS GCM, and developing the transfer function to derive grid-point temperatures from the synoptic circulation. Principal Components Analysis is used to characterize the primary modes of the spatial and temporal variability in the observed and simulated climate, and the model validation is based on correlations between component loadings, and power spectral analysis of the component scores. The results show that the high resolution GISS model does an excellent job of simulating the synoptic circulation over the U.S., and that grid-point temperatures can be predicted with reasonable accuracy from the circulation patterns.

Crane, Robert G.↗
NASA NTRS1990

A model for a space shuttle safing and failure-detection expert

The safing and failure-detection expert (SAFE) is a prototype for a malfunction detection, diagnosis, and safing system for the atmospheric revitalization subsystem (ARS) in the Space Shuttle orbiter. SAFE, whose knowledge was extracted from expert-provided heuristics and documented procedures, automatically manages all phases of failure handling: detection, diagnosis, testing procedures, and recovery instructions. The SAFE architecture allows it to handle correctly sensor failures and multiple malfunctions. Since SAFE is highly interactive, it was used as a test bed for the evaluation of various advanced human-computer interface (HCI) techniques. The use of such expert systems in the next generation of space vehicles would increase their reliability and autonomy to levels not achievable before.

Zeilingold, Daphna↗
NASA NTRS1993

Robotics in a controlled, ecological life support system

Controlled, Ecological Life Support Systems (CELSS) that utilize plants to provide food, water and oxygen could consume considerable amounts of labor unless crop production, recovery and processing are automated. Robotic manipulators equipped with special end-effectors and programmed to perform the sensing and materials handling tasks would minimize the amount of astronaut labor required. The Human Rated Test Facility (HRTF) planned for Johnson Space Center could discover and demonstrate techniques of crop production which can be reliably integrated with machinery to minimize labor requirements. Before the physical components (shelves, lighting fixtures, etc.) can be selected, a systems analysis must be performed to determine which alternative processes should be followed and how the materials handling tasks should be automated. Given that the current procedures used to grow crops in a CELSS may not be the best methods to automate, then what are the alternatives? How may plants be grown, harvested, processed for food, and the inedible components recycled? What commercial technologies current exist? What research efforts are underway to develop new technologies which might satisfy the need for automation in a CELSS? The answers to these questions should prove enlightening and provide some of the information necessary to perform the systems analysis. The planting, culturing, gathering, threshing and separation, food processing, and recovery of inedible portions of wheat were studied. The basic biological and materials handling processes of each task are defined and discussed. Current practices at Johnson Space Center and other NASA centers are described and compared to common production practices in the plant production industry. Technologies currently being researched which might be applicable are identified and illustrated. Finally, based on this knowledge, several scenarios are proposed for automating the tasks for wheat.

Miles, Gaines E.↗
NASA NTRS2004

Fluorescent Approaches to High Throughput Crystallography

X-ray crystallography remains the primary method for determining the structure of macromolecules. The first requirement is to have crystals, and obtaining them is often the rate-limiting step. The numbers of crystallization trials that are set up for any one protein for structural genomics, and the rate at which they are being set up, now overwhelm the ability for strictly human analysis of the results. Automated analysis methods are now being implemented with varying degrees of success, but these typically cannot reliably extract intermediate results. By covalently modifying a subpopulation, less than or = 1%, of a macromolecule solution with a fluorescent probe, the labeled material will add to a growing crystal as a microheterogeneous growth unit. Labeling procedures can be readily incorporated into the final stages of a macromolecules purification. The covalently attached probe will concentrate in the crystal relative to the solution, and under fluorescent illumination the crystals will show up as bright objects against a dark background. As crystalline packing is more dense than amorphous precipitate, the fluorescence intensity can be used as a guide in distinguishing different types of precipitated phases, even in the absence of obvious crystalline features, widening the available potential lead conditions in the absence of clear "bits." Non-protein structures, such as salt crystals, will not incorporate the probe and will not show up under fluorescent illumination. Also, brightly fluorescent crystals are readily found against less fluorescent precipitated phases, which under white light illumination may serve to obscure the crystals. Automated image analysis to find crystals should be greatly facilitated, without having to first define crystallization drop boundaries and by having the protein or protein structures all that show up. The trace fluorescently labeled crystals will also emit with sufficient intensity to aid in the automation of crystal alignment using relatively low cost optics, further increasing throughput at synchrotrons. This presentation will focus on the methodology for fluorescent labeling, the crystallization results, and the effects of the trace labeling on the crystal quality.

Minamitani, Elizabeth Forsythe↗
NASA NTRS2005

Fluorescent Approaches to High Throughput Crystallography

X-ray crystallography remains the primary method for determining the structure of macromolecules. The first requirement is to have crystals, and obtaining them is often the rate-limiting step. The numbers of crystallization trials that are set up for any one protein for structural genomics, and the rate at which they are being set up, now overwhelm the ability for strictly human analysis of the results. Automated analysis methods are now being implemented with varying degrees of success, but these typically cannot reliably extract intermediate results. By covalently modifying a subpopulation, 51%, of a macromolecule solution with a fluorescent probe, the labeled material will add to a growing crystal as a microheterogeneous growth unit. Labeling procedures can be readily incorporated into the final stages of purification. The covalently attached probe will concentrate in the crystal relative to the solution, and under fluorescent illumination the crystals show up as bright objects against a dark background. As crystalline packing is more dense than amorphous precipitate, the fluorescence intensity can be used as a guide in distinguishing different types of precipitated phases, even in the absence of obvious crystalline features, widening the available potential lead conditions in the absence of clear hits. Non-protein structures, such as salt crystals, will not incorporate the probe and will not show up under fluorescent illumination. Also, brightly fluorescent crystals are readily found against less fluorescent precipitated phases, which under white light illumination may serve to obscure the crystals. Automated image analysis to find crystals should be greatly facilitated, without having to first define crystallization drop boundaries and by having the protein or protein structures all that show up. The trace fluorescently labeled crystals will also emit with sufficient intensity to aid in the automation of crystal alignment using relatively low cost optics, further increasing throughput at synchrotrons. This presentation will focus on the methodology for fluorescent labeling, the crystallization results, and the effects of the trace labeling on the crystal quality.

Pusey, Marc L.↗
NASA NTRS2004

Effects of heavy ions on visual function and electrophysiology of rodents: the ALTEA-MICE project

ALTEA-MICE will supplement the ALTEA project on astronauts and provide information on the functional visual impairment possibly induced by heavy ions during prolonged operations in microgravity. Goals of ALTEA-MICE are: (1) to investigate the effects of heavy ions on the visual system of normal and mutant mice with retinal defects; (2) to define reliable experimental conditions for space research; and (3) to develop animal models to study the physiological consequences of space travels on humans. Remotely controlled mouse setup, applied electrophysiological recording methods, remote particle monitoring, and experimental procedures were developed and tested. The project has proved feasible under laboratory-controlled conditions comparable in important aspects to those of astronauts' exposure to particle in space. Experiments are performed at the Brookhaven National Laboratories [BNL] (Upton, NY, USA) and the Gesellschaft fur Schwerionenforschung mbH [GSI]/Biophysik (Darmstadt, FRG) to identify possible electrophysiological changes and/or activation of protective mechanisms in response to pulsed radiation. Offline data analyses are in progress and observations are still anecdotal. Electrophysiological changes after pulsed radiation are within the limits of spontaneous variability under anesthesia, with only indirect evidence of possible retinal/cortical responses. Immunostaining showed changes (e.g. increased expression of FGF2 protein in the outer nuclear layer) suggesting a retinal stress reaction to high-energy particles of potential relevance in space. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

NASA Center JSC↗
NASA NTRS2005

Fluorescent Approaches to High Throughput Crystallography

X-ray crystallography remains the primary method for determining the structure of macromolecules. The first requirement is to have crystals, and obtaining them is often the rate-limiting step. The numbers of crystallization trials that are set up for any one protein for structural genomics, and the rate at which they are being set up, now overwhelm the ability for strictly human analysis of the results. Automated analysis methods are now being implemented with varying degrees of success, but these typically cannot reliably extract intermediate results. By covalently modifying a subpopulation, less than or = 1 %, of a macromolecule solution with a fluorescent probe, the labeled material will add to a growing crystal as a microheterogeneous growth unit. Labeling procedures can be readily incorporated into the final stages of purification. The covalently attached probe will concentrate in the crystal relative to the solution, and under fluorescent illumination the crystals show up as bright objects against a dark background. As crystalline packing is more dense than amorphous precipitate, the fluorescence intensity can be used as a guide in distinguishing different types of precipitated phases, even in the absence of obvious crystalline features, widening the available potential lead conditions in the absence of clear "hits." Non-protein structures, such as salt crystals, will not incorporate the probe and will not show up under fluorescent illumination. Also, brightly fluorescent crystals are readily found against less fluorescent precipitated phases, which under white light illumination may serve to obscure the crystals. Automated image analysis to find crystals should be greatly facilitated, without having to first define crystallization drop boundaries and by having the protein or protein structures all that show up. The trace fluorescently labeled crystals will also emit with sufficient intensity to aid in the automation of crystal alignment using relatively low cost optics, further increasing throughput at synchrotrons. Preliminary experiments show that the presence of the fluorescent probe does not affect the nucleation process or the quality of the X-ray data obtained.

Pusey, Marc L.↗
NASA NTRS2005

Challenges for Electronics in the Vision for Space Exploration

This presentation has been a brief snapshot discussing electronics and Exploration-related challenges. The vision for Space Exploration creates a new paradigm for NASA missions. This includes transport (Crew Exploration Vehicle-CEV), and lunar and Mars Exploration and human presence. If one considers the additional hazards faced by these concepts versus more traditional NASA missions, multiple challenges surface for reliable utilization of electronic parts. The true challenge is to provide a risk as low as reasonably achievable (ALARA-a traditional biological radiation exposure term), while still providing cost effective solutions. This presentation also discusses the hazard for electronic parts and exploration, the types of electronic parts for exploration, and the critical juncture for space usage of commercial changes in the electronics world.

LaBel, Kenneth A.↗