Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hunting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Use of boiled hexamethylenetetramine and urea to increase the porosity of cerium dioxide microspheres formed in the internal gelation process

Cerium dioxide (CeO 2 ) is a commonly used simulant for plutonium dioxide and for plutonium (Pu) in a mixed uranium (U) and Pu oxide [(U, Pu)O 2 ] in nuclear fuel development. This effort developed CeO 2 microspheres with different porosities and diameters for use in a crush-strength study. The internal gelation technique has produced CeO 2 microspheres with limited initial porosity. When an equal molar solution of urea and hexamethylenetetramine (HMTA) is gently boiling for 1 hr and used in the gelation process, the crystallite size and porosity of mixed U and thorium oxide microspheres and the (U, Pu)O 2 microspheres increased significantly. In this study with cerium, the combination of ammonium cerium nitrate and 1-h boiled HMTA-urea failed to produce a stable feed broth. However, when the 1-h heated HMTA-urea was combined with unheated HMTA-urea in 1 to 3 volume ratio or the boiling time of the HMTA-urea was reduced to 15-20 min, a stable solution of HMTA, urea, and Ce was formed at 273 K. This new Ce solution produced CeO 2 microspheres with much higher initial porosities. Intermediate porosities were possible when the heated HMTA/urea was aged prior to use.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Key process parameters to modify the porosity of cerium dioxide microspheres formed in the internal gelation process

Recently, an internal gelation study demonstrated that the use of heated urea and hexamethylenetetramine can have a pronounced impact on the porosity and sintering characteristics of cerium dioxide (CeO 2 ) microspheres. This effort has identified process variables that can significantly change the initial porosity of the CeO 2 microspheres with slight modifications. A relatively small difference in the sample preparation of cerium ammonium nitrate and ammonium hydroxide solution had a large reproducible impact on the porosity and slow pour density of the produced microspheres. Increases in the gelation temperature as small as 0.5 K also produced a noticeable increase in the slow pour density. If the gelation temperature was increased too high, the use of the heated hexamethylenetetramine and urea was no longer observed to be effective in increasing the porosity of the CeO 2 microspheres. In conclusion, the final process variable was the amount of dispersing agent, Span™ 80, which can increase the slow pour density and produce significantly smaller microspheres.

36 MATERIALS SCIENCE↗

Evaluation of various carbon blacks and dispersing agents for use in the preparation of uranium microspheres with carbon

A comparison study on carbon blacks and dispersing agents was performed to determine their impacts on the final properties of uranium fuel kernels with carbon. The main target compositions in this internal gelation study were 10 and 20 mol % uranium dicarbide (UC 2 ), which is UC 1.86 , with the balance uranium dioxide. After heat treatment at 1900 K in flowing carbon monoxide in argon for 12 h, the density of the kernels produced using a X-energy proprietary carbon suspension, which is commercially available, ranged from 96% to 100% of theoretical density (TD), with full conversion of UC to UC 2 at both carbon concentrations. However, higher carbon concentrations such as a 2.5 mol ratio of carbon to uranium in the feed solutions failed to produce gel spheres with the proprietary carbon suspension. The kernels using our former baseline of Mogul L carbon black and Tamol SN were 90–92% of TD with full conversion of UC to UC 2 at a variety of carbon levels. Raven 5000 carbon black and Tamol SN were used to produce 10 mol % UC2 kernels with 95% of TD. However, an increase in the Raven 5000 concentration led to a kernel density below 90% of TD. Raven 3500 carbon black and Tamol SN were used to make very dense kernels without complete conversion to UC 2 . Lastly, the selection of the carbon black and dispersing agent is highly dependent on the desired final properties of the target kernels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Production of more ideal uranium trioxide microspheres for the sol-gel microsphere pelletization process without the use of carbon

Renewed interest by the U.S. Department of Energy in the sol-gel microsphere pelletization process led to an evaluation of dried uranium trioxide (UO 3 ) microspheres produced without the use of carbon by the internal gelation process at Oak Ridge National Laboratory. An earlier study has shown that less dense UO 3 microspheres led to uranium dioxide pellets with higher densities. This effort identified feed formulations that produced dried UO 3 microspheres with the lowest tap densities for gelation temperatures of 333, 343, 353, and 363 K. The tap densities of these dried UO 3 microspheres ranged from 680 to 820 kg/m 3 , which were significantly lower than the previously reported low UO 3 density of 900 kg/m 3 . This study confirmed an earlier observation that the effects of gelation conditions on the properties of the gel sphere are complex since only two of the four best formulations were similar in composition. As a result, the need to age the wet gel spheres in the gelation medium for 20 min at the end of the experiment was also confirmed.

36 MATERIALS SCIENCE↗

Investigation of sol-gel feedstock additions and process variables on the density and microstructure of UN microspheres

The kernel of fully ceramic microencapsulated (FCM) fuel requires a material with high fissile density. For that reason, among others, UN is the appropriate chemical state for low enriched U fuel. The UN kernels are spheres ~800 μm in diameter made using a sol-gel process. The effect of additives on the chemistry and density of the UN microspheres are investigated in this work. Gadolinium nitrate hexahydrate, Gd 2 O 3 , B, SiO 2 and SiC were incorporated into the sol-gel broth in varying concentrations. It was found that Gd can serve as both a sintering aid and burnable poison when added to the sol-gel broth as a Gd(NO 3 ) 3 6H 2 O. However, even with the increased theoretical density of the UN microspheres, the U density was still too low for the FCM design that replaces UO 2 pellets in a commercial light water reactor. Silicon carbide and B were also successfully added but produced a lower density final product. Other sol-gel processing variables were investigated. In conclusion, the pour density of the sol-gel feedstock was found to influence the final converted UN kernel density.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fabrication of UO 2 -Mo composite fuel with enhanced thermal conductivity from sol-gel feedstock

In this study, fabrication of monolithic UO 2 and UO 2 -Mo composites from Mo metal powder feedstock and UO 3 spheres derived from internal gelation was explored. The addition of 10 vol% Mo as a secondary phase to UO 2 led to an increase of up to 30% in thermal conductivity compared to syntheses in which only pure UO 2 was used. Lastly, using coarse and fine Mo metal powder feedstock led to different microstructures, influencing the thermal conductivity of the resulting composites.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Additional complexity in the Raman spectra of U 3 O 8

Uranium oxides are readily amenable to investigation using Raman spectroscopy, and this approach is frequently used as a chemical analysis tool. We show, in triuranium octoxide (U 3 O 8 ), the presence of previously unreported Raman peaks located below 100 cm ₋1 . By maximum intensity, the strongest peak in U 3 O 8 appears at 54 cm ₋1 and is resolution limited, making this mode an ideal candidate for chemically identifying U 3 O 8 using Raman spectroscopy. Detailed peak analysis suggests that the main spectral feature between 300 and 500 cm ₋1 is more accurately described by a septet than a triplet. Two samples of differing oxygen content show only minor differences in bulk crystal structure, but subtle changes in lattice dynamics are suggestive of defect scattering in analogy to UO 2+x .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Production of 28 μm zirconium carbide kernels using the internal gelation process and microfluidics

Studies using internal gelation and microfluidics have shown that the production of sintered spheres with diameters below 200 mm is possible. The addition of carbon can be problematic because of slow flow rates (100 mL/min) and long run times (4 h). However, we report a solution of dispersed carbon, Cabot’s TPX-101, was successfully used with solutions of zirconyl nitrate, urea, and hexamethylenetetramine to make zirconium microspheres with carbon. A simple carbothermic reduction using a maximum temperature of 2073 K and ultrahigh purity argon produced zirconium carbide kernels with an average diameter of 28 mm and a standard deviation of 2.3 mm.

36 MATERIALS SCIENCE↗

Microstructural and crystallographic effects of sol-gel synthesized Ti-doped UO 2 sintered under reducing conditions

Titanium (Ti)-doped UO 2 microspheres of three different Ti concentrations (1000, 2000, and 4000 wppm) were synthesized using an internal gelation process. The microspheres were pressed into pellets, and a two-step heat treatment was applied to form monolithic cylindrical pellets with high densities (≥95%TD). Microstructure of these samples consisted of equiaxed grains with >300% increase in average grain size compared to the undoped UO 2 pellets. Secondary Ti-rich chemical phases corresponding to a liquid eutectic formed during sintering were observed at grain boundaries of UO 2 for samples doped with 4000 wppm Ti. Furthermore, these Ti-rich chemical phases were not observed in 1000 or 2000 wppm Ti samples at microscale using electron microscopy investigations. The 0.02–0.04% lower lattice parameter values for the Ti-doped UO 2 samples compared to the undoped UO 2 confirms the incorporation of Ti into the UO 2 lattice.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An evaluation of tri-valent oxide (Cr 2 O 3 ) as a grain enlarging dopant for UO 2 nuclear fuels fabricated under reducing environment

A study was performed to evaluate the microstructure and crystallography of nominally 500–2000 Cr 2 O 3 -doped UO 2 fabricated in a temperature range of 1150–1750°C under reducing experimental conditions. We observed an increase in grain size of the samples with the increase in heat treating temperature as expected. For a given sintering temperature (1700–1750°C), an increase in the grain size was also observed with the increase in Cr 2 O 3 concentration up to a value of ~1000–1200 wppm. A decrease in fission gas release as a function of grain size was estimated for the Cr 2 O 3 -doped UO 2 samples assuming specified post-irradiation annealing conditions. A nearly linear decrease was obtained in the lattice parameter of the Cr 2 O 3 -doped UO 2 fcc phase with the increase in Cr 2 O 3 concentration, especially up to a nominal value of 1000 wppm. The lattice parameter decrease was also persistent with the increase in the average grain size as a result of addition of Cr 2 O 3 into the UO 2 lattice. An increase in the crystallite size and a decrease in the microstrain of the $fcc$ phase were observed with the increase in the average grain size of the samples, indicating a higher crystallinity of the Cr 2 O 3 -doped samples than that of the undoped UO 2 sample.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Trichloroethylene replacements for the cleaning of silicone oil used in the internal gelation process

Silicone oil continues to be used as a gelation medium for internal gelation process. Typically, the silicone oil has been removed from the gel spheres using trichloroethylene (TCE) washes. However, TCE is no longer a viable option for large-scale operations because of environmental issues, health concerns, and disposal costs. Furthermore, during the development of a large gelation system at the Y-12 National Security Complex, two new TCE wash replacements were identified. NuSolv SOR-C and FluoSolv WS were used in a number of uranium runs and found to effectively remove silicone oil. NuSolv SOR-C was determined to be the best option.

36 MATERIALS SCIENCE↗

Optical vibrational spectra and proposed crystal structure of ε-UO 3

ε-UO 3 is an exotic polymorph in the uranium trioxide system with an undetermined crystal structure and limited optical vibrational spectroscopic data. To improve understanding of this compound, we synthesize and investigate the crystal structure and optical vibrational spectra of ε-UO 3 . Infrared spectra collected for ε-UO 3 are in good agreement with previously published results, and our studies extend the available data into the low-energy (600–100 cm –1 ) regime. For the first time, Raman spectra are presented for ε-UO 3 using both 785 and 532 nm excitation wavelengths. Previous reports suggest an impurity phase may be present in ε-UO 3 produced by calcination of U 3 O 8 ; however, spectral center-of-mass calculations, principal component analyses, and Raman spectroscopic mapping employed to investigate this possibility indicate that the product of U 3 O 8 calcined in O 3 (g) in this work is likely phase-pure. A possible novel structure solution for ε-UO 3 is determined via Rietveld refinement of powder X-ray diffraction data and is triclinic, P-1, with a = 4.01 Å, b = 3.85 Å, c = 4.18 Å, and α = 98.26°, β = 90.41°, γ = 120.46° (R wp = 8.30%). The asymmetric unit of ε-UO 3 consists of U(VI) in hexagonal bipyramidal coordination with displaced equatorial oxygen. Further analysis reveals that the structure of ε-UO3 is best described by a 2 × 1 × 2 supercell structure in P-1 with a = 8.03 Å, b = 3.86 Å, c = 8.37 Å with α = 98.26°, β = 90.41°, and γ = 120.46°, although a higher-symmetry structure is possible. Optical vibrational spectroscopic and structural measurements of ε-UO 3 presented here furthers our understanding of this complex uranium oxide and clarifies the origin of reported structural similarity to U 3 O 8 .

-UO3↗

Synthesis of U 3 O 8 and UO 2 microspheres using microfluidics

Uranium-bearing microspheres below 50µm with a narrow size distribution allows for a wider variety of fuel forms. To accommodate the smaller size, gel microspheres with a composition of UO 3 ∙nH 2 O∙mNH 3 were synthesized using microfluidics and subsequently converted to U 3 O 8 and UO 2 . To accommodate the slower flow rates required by microfluidics, a more stable broth was established. Additionally, the gelation studies resulted in a broth that was stable for more than two days at 0°C and for close to 3 h at room temperature while still gelling within 25 s. Synthesis of gel microspheres with a narrow size distribution lasted for 5 h and produced ~0.5 g of air-dried material. The gelled microspheres were converted to U 3 O 8 and UO 2 and with sizes of 50 and 40 µm in diameter, respectively.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Optical vibrational spectra of β -U 3 O 8

Technogenic uranium oxides are ubiquitous in the nuclear fuel cycle. Identifying the chemical composition of these oxides is frequently done with optical vibrational spectroscopy (infrared and Raman spectroscopy). The α phase of U 3 O 8 is the most stable and common uranium oxide, but a β phase of U 3 O 8 can be produced via very slow cooling of the α phase from elevated temperatures or the application of small shear forces. However, optical spectra of this compound have not been reported. In this work, we use high-resolution attenuated total reflection infrared spectroscopy and Raman spectroscopy to collect the optical vibrational spectra. Despite similarities in the crystal structure of α and β – U 3 O 8 , the optical spectra of these compounds differ substantially, with additional Raman active modes in β – U 3 O 8 that are likely originating from differences in the U–O coordination units. Measurements presented here provide spectral characterization that can be used for chemical identification in future studies of uranium oxides.

36 MATERIALS SCIENCE↗

A novel protocol to recycle zirconium from zirconium alloy cladding from used nuclear fuel rods

A potential new zirconium recycling protocol has been demonstrated using unirradiated Zircaloy-based claddings and depleted uranium oxide for the chemical removal of zirconium alloy cladding in used nuclear fuel (UNF) rods from light water reactors. This protocol is based on the application of three new scientific findings. First, a new lower temperature chlorination reaction of zirconium with sulfur monochloride is described. Second, the high solubility of zirconium chloride in thionyl chloride is used to separate it from uranium oxide fuel and fission and activation contaminants. Finally, in the third step, the zirconium chloride is purified by simple recrystallization from thionyl chloride. Utilizing sulfur chloride solvents for a lower temperature liquid-based chemical digestion and purification of zirconium alloy claddings reduces technical complications experienced by current high temperature gas phase chlorination strategies, such as contamination of product streams. This novel protocol has been demonstrated on a 3–50 g scale of unirradiated zirconium alloy, with no significant change in the time required for complete chlorination (3–4 h). This zirconium chlorination protocol has also been performed in the presence of depleted uranium oxide pellets. The depleted fuel pellets do not affect zirconium chlorination, and the chlorination protocol does not chemically or physically alter the fuel pellets. Finally, a preliminary description of an industrial protocol to recycle nuclear grade zirconium from UNF rods is presented.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structural features of early fuel cycle taggant incorporation for intentional nuclear forensics

To develop strategies for incorporating transition metal taggants (Fe, Cr, and Ni) into oxide fuels and to understand how these taggant candidates persist through early fuel cycle processes, synthetic procedures are modified from established production routes to yield intentionally tagged early fuel cycle intermediates including uranyl nitrate hexahydrate (UNH, UO 2 (NO 3 ) 2 ·6H 2 O), uranyl peroxide tetrahydrate (studtite, UO 2 O 2 ·4H 2 O), and uranyl peroxide dihydrate (metastudtite, UO 2 O 2 ·2H 2 O). First, Fe, Cr, and Ni nitrate solutions are introduced to an aqueous solution of UNH followed by precipitation to produce tagged UNH. Then, studtite is precipitated from UNH followed by dehydration to metastudtite. Structural influences of taggant incorporation within all synthesized phases are investigated using powder X-ray diffraction (PXRD) and Raman spectroscopy to provide insight into crystallographic modifications resulting from the addition of tags to these early fuel cycle materials and elucidate the chemical form of taggants introduced at these stages. The possibility of segregation of taggant species into discrete phases within U matrices was examined using scanning electron microscopy with energy dispersive X-ray spectroscopy. Taggant concentrations in solid-phase materials were determined using inductively coupled plasma-optical emission spectroscopy. Observations from Raman spectroscopy and PXRD indicate that introducing transition metal tags during uranyl nitrate precipitation results in potential impurity phase segregation in UNH, but transition metal incorporation is suggested by results for tagged uranyl peroxide materials. Further, results from this study will inform strategies for optimizing taggant incorporation in UO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Raman spectroscopy of uranium nitride kernels

Uranium nitride is an advanced fuel candidate for a wide variety of advanced nuclear reactors. This work summarizes the first characterization of UN kernels by Raman spectroscopy. First-principles density functional theory calculations were performed to predict the Raman spectra of uranium sesquinitride (U 2 N 3 ), uranium dinitride (UN 2 ), uranium mononitride (UN), uranium monocarbide (UC), as well as U-N-C (UN 1-x C x ) and a U-N-C-O mixture. Further, a core–shell structure was identified by scanning electron microscopy and Raman spectroscopy imaging. A signal at ~500 cm -1 was identified on the periphery of the core-shell structure, possibly corresponding to U 2 N 3 and/or UN 2 . This signal broadens and shifts to 470 cm -1 because of the formation of UNC, UNCO or U 2 N 3+x structures. The culmination of this work demonstrates the feasibility of using Raman spectroscopy to identify variations in composition and phases in UN kernels.

36 MATERIALS SCIENCE↗