SEARCH · Search NASA

Results for “Inflatable structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRS2009

Improved Method of Design for Folding Inflatable Shells

An improved method of designing complexly shaped inflatable shells to be assembled from gores was conceived for original application to the inflatable outer shell of a developmental habitable spacecraft module having a cylindrical mid-length section with toroidal end caps. The method is also applicable to inflatable shells of various shapes for terrestrial use. The method addresses problems associated with the assembly, folding, transport, and deployment of inflatable shells that may comprise multiple layers and have complex shapes that can include such doubly curved surfaces as toroids and spheres. One particularly difficult problem is that of mathematically defining fold lines on a gore pattern in a double- curvature region. Moreover, because the fold lines in a double-curvature region tend to be curved, there is a practical problem of how to implement the folds. Another problem is that of modifying the basic gore shapes and sizes for the various layers so that when they are folded as part of the integral structure, they do not mechanically interfere with each other at the fold lines. Heretofore, it has been a common practice to design an inflatable shell to be assembled in the deployed configuration, without regard for the need to fold it into compact form. Typically, the result has been that folding has been a difficult, time-consuming process resulting in a An improved method of designing complexly shaped inflatable shells to be assembled from gores was conceived for original application to the inflatable outer shell of a developmental habitable spacecraft module having a cylindrical mid-length section with toroidal end caps. The method is also applicable to inflatable shells of various shapes for terrestrial use. The method addresses problems associated with the assembly, folding, transport, and deployment of inflatable shells that may comprise multiple layers and have complex shapes that can include such doubly curved surfaces as toroids and spheres. One particularly difficult problem is that of mathematically defining fold lines on a gore pattern in a double- curvature region. Moreover, because the fold lines in a double-curvature region tend to be curved, there is a practical problem of how to implement the folds. Another problem is that of modifying the basic gore shapes and sizes for the various layers so that when they are folded as part of the integral structure, they do not mechanically interfere with each other at the fold lines. Heretofore, it has been a common practice to design an inflatable shell to be assembled in the deployed configuration, without regard for the need to fold it into compact form. Typically, the result has been that folding has been a difficult, time-consuming process resulting in a

Johnson, Christopher J.↗

DOE OSTI2025

Refining localtype primordial non-Gaussianity: Sharpened bϕ constraints through bias expansion

Local-type primordial non-Gaussianity (PNG), predicted by many nonminimal models of inflation, creates a scale-dependent contribution to the power spectrum of large-scale structure tracers. Its amplitude is characterized by the product bϕfNLloc, where bϕ is an astrophysical parameter dependent on the properties of the tracer. However, bϕ exhibits significant secondary dependence on halo concentration and other astrophysical properties, which may bias and weaken the constraints on fNLloc. In this work, we demonstrate that incorporating knowledge of the relation between Lagrangian bias parameters and bϕ can significantly enhance PNG constraints. We employ the hybrid effective field theory approach at the field level and a linear regression model to seek a connection between the bias parameters and bϕ for halo and galaxy samples, constructed using the abacussummit simulation suite and mimicking the luminous red galaxies and quasistellar objects of the Dark Energy Spectroscopic Instrument survey. For the fixed-mass halo samples, our full bias model reduces the uncertainty by more than 70%, with most of that improvement coming from b∇, which we find to be an excellent proxy for concentration. For the galaxy samples, our model reduces the uncertainty on bϕ by 80% for all tracers. By adopting Lagrangian-bias informed priors on the parameter bϕ, future analyses can thus constrain fNLloc with less bias and smaller errors.

Hadzhiyska, Boryana↗

NASA NTRS1973

Manufacture of large, lightweight parabolic antennas

Antenna was produced in segments. Parabole sections were built up as aluminum foil sandwich with core bonded by film adhesive; whole structure was oven-cured after assembly. Structure was assembled with special tool for splice-bonding segments into complete dish, and inflatable bladder to apply pressure at joints during cure.

Hooper, S. W.↗

NASA NTRS1982

Finite element analysis of wrinkling membranes

The finite element analysis of wrinkling membranes was investigated. The determination of stresses and deformations within large partly wrinkled membrane surfaces is a problem of significant technical interest in such areas as conceptual design and analysis of ultra lightweight spacecraft structures. A closed-form solution to an axisymmetric problem involving partial wrinkling of an inflated shallow membrane was obtained. In particular, a membrane in the shape of a sperical annulus was considered. The outer edge of the annulus was assumed to be fixed so that no displacements occur along the outer perimeter. The inner edge is assumed to be clamped to a rigid movable plug. Solutions for the complete stress, strain, and displacement fields under the assumption of inextensional material behavior are presented for the case of pure torsional loads applied to the plug, and for the case of pure axial loads applied to the plug.

Miller, R. K.↗

NASA NTRS2002

A Chandra X-Ray Study of Cygnus A: The Cluster of Galaxies - 3

We present an analysis of the Chandra Advanced CCD Imaging Spectrometer (ACIS) observation of the intracluster gas associated with the cluster of galaxies surrounding Cygnus A. The dominant gaseous structure is a roughly elliptical (presumably prolate spheroidal in three dimensions) feature with semimajor axis approximately equal to 1.(prime)1 (approximately equal to 100 kpc). This structure apparently represents intracluster gas that has been swept up and compressed by a cavity inflated in this gas by relativistic material that has passed through the ends of the radio jets. The X-ray-emitting gas shows this prolate spheroidal morphology to approximately equal to 1.(prime)2 (110 kpc) from the radio galaxy but is spherical on larger scales. The X-ray emission from the intracluster gas extends to at least 8 prime (approximately equal to 720 kpc) from the radio galaxy, and a second, extended source of X-ray emission (probably associated with a second cluster of galaxies) is seen some 12 prime (approximately equal to 1 Mpc) to the northwest of Cygnus A. The X-ray spectrum of the integrated intracluster gas imaged on the S3 chip (dimensions 8 prime x 8 prime = 720 x 720 kpc), excluding the contribution from the radio galaxy and other compact sources of X-ray emission, has a gas temperature, metallicity, and unabsorbed 2-10 keV rest-frame luminosity of 7.7 keV, 0.34 times solar, and 3.5 x 10(exp 44) ergs per second, respectively. We have projected the X-ray spectra taken from 12 elliptical and circular annuli in order to derive a run of temperature, metallicity, density, and pressure as a function of radius. The temperature of the X-ray-emitting gas drops from approximately equal to 8 keV more than 100 kpc from the center to approximately equal to 5 keV some 80 kpc from the center, with the coolest gas immediately adjacent to the radio galaxy. "Belts" of slightly cooler (approximately equal to 4 keV) X-ray-emitting gas run around the minor dimension of the cavity created by the radio source, while the limb-brightened edges of the cavity are slightly hotter (approximately equal to 6 keV), perhaps as a result of heating by a bow shock driven by the probably expanding cavity into the intracluster gas. There is a metallicity gradient in the X-ray-emitting gas, with the highest metallicities (approximately solar) found close to the center, decreasing to approximately 0.3 times solar in the outer parts. We have used the assumption of hydrostatic equilibrium to derive a total cluster mass within 500 kpc of 2.0 x 10(exp 14) solar mass and 2.8 x 10(exp 14) solar mass for constant and centrally decreasing temperature profiles, respectively. The total mass of X-ray-emitting gas within the same radius is 1.1 x 10(exp 13) solar mass. Thus, the gas fraction of the cluster within 500 kpc is 0.055 and 0.039 for the constant and centrally decreasing temperature profiles, respectively.

Smith, David A.↗

NASA NTRS2005

Asymmetric Electrostatic Radiation Shielding for Spacecraft

A paper describes the types, sources, and adverse effects of energetic-particle radiation in interplanetary space, and explores a concept of using asymmetric electrostatic shielding to reduce the amount of such radiation impinging on spacecraft. Typically, such shielding would include a system of multiple inflatable, electrically conductive spheres deployed in clusters in the vicinity of a spacecraft on lightweight structures that would maintain the spheres in a predetermined multipole geometry. High-voltage generators would maintain the spheres at potential differences chosen in conjunction with the multipole geometry so that the resulting multipole field would gradually divert approaching energetic atomic nuclei from a central region occupied by the spacecraft. The spheres nearest the center would be the most positive, so as to repel the positively charged impinging nuclei from the center. At the same time, the monopole potential of the overall spacecraft-and-shielding system would be made negative so as to repel thermal electrons. The paper presents results of computational simulations of energetic-particle trajectories and shield efficiency for a trial system of 21 spheres arranged in three clusters in an overall linear quadrupole configuration. Further development would be necessary to make this shielding concept practical.

Metzger, Philip T.↗

NASA NTRS2015

Pilot Deployment of the LDSD Parachute via a Supersonic Ballute

The Low Density Supersonic Decelerator (LDSD) Project required the use of a pilot system due to the inability to mortar deploy its main supersonic parachute. A mortar deployed 4.4 m diameter supersonic ram-air ballute was selected as the pilot system for its high drag coefficient and stability relative to candidate supersonic parachutes at the targeted operational Mach number of 3. The ballute underwent a significant development program that included the development of a new liquid methanol-based pre-inflation system to assist the ballute inflation process. Both pneumatic and pyrotechnic mortar tests were conducted to verify orderly rigging deployment, bag strip, inflation aid activation, and proper mortar performance. The ballute was iteratively analyzed between fluid and structural analysis codes to obtain aerodynamic and aerothermodynamic estimates as well as estimates of the ballute's structural integrity and shape. The ballute was successfully flown in June 2014 at a Mach number of 2.73 as part of the first LDSD supersonic flight test and performed beyond expectations. Recovery of the ballute indicated that it did not exceed its structural or thermal capabilities. This flight set a historical precedent as it represented the largest ballute to have ever been successfully flown at this Mach number by a NASA entity.

Tanner, Christopher L.↗

NASA NTRS1992

Latest COBE results, large-scale data, and predictions of inflation

One of the predictions of the inflationary scenario of cosmology is that the initial spectrum of primordial density fluctuations (PDFs) must have the Harrison-Zeldovich (HZ) form. Here, in order to test the inflationary scenario, predictions of the microwave background radiation (MBR) anisotropies measured by COBE are computed based on large-scale data for the universe and assuming Omega-1 and the HZ spectrum on large scales. It is found that the minimal scale where the spectrum can first enter the HZ regime is found, constraining the power spectrum of the mass distribution to within the bias factor b. This factor is determined and used to predict parameters of the MBR anisotropy field. For the spectrum of PDFs that reaches the HZ regime immediately after the scale accessible to the APM catalog, the numbers on MBR anisotropies are consistent with the COBE detections and thus the standard inflation can indeed be considered a viable theory for the origin of the large-scale structure in the universe.

Kashlinsky, A.↗

NASA NTRS2018

Measurements of Parachute Dynamics in the World's Largest Wind Tunnel by Stereo Photogrammetry

Between 2012 and 2017, parachutes for four NASA Projects were tested in the 80- by 120-Ft test section of the National Full-Scale Aerodynamic Complex (NFAC) at NASA Ames Research Center. These projects were: (1) Low-Density Supersonic Decelerator (LDSD); (2) Capsule Parachute Assembly System (CPAS, for Orion); (3) Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight, a Mars mission); and (4) Mars 2020. In all tests stereo photogrammetry was used to measure time-dependent positions of features on the canopies. For the LDSD and CPAS tests, where the purpose was to study the trade-off between stability and drag of different parachute designs, the pendulum motion of the canopies about the riser attachment point was measured by calibrated cameras in the diffuser. The CPAS test also included static measurements where the inflated parachutes were pulled to the side by a system of tethers. The Insight tests were structural qualification tests where each canopy was packed in a bag and launched from a mortar. Cameras in the diffuser measured the trajectory of the bag and the stripping of the bag from the canopy. The Mars 2020 test was a workmanship verification test where the canopies were either launched from a mortar or deployed from a sleeve stretched along the tunnel axis. The deployments were recorded from many directions by thirteen high-speed cameras distributed in the diffuser and test section. Photogrammetry was not planned; however, after a tunnel-related accident ended the test prematurely, photogrammetric measurements were bootstrapped from the images to support the accident investigations. This paper describes how the photogrammetry measurements were made in each test and presents typical results.

Schairer, Edward T.↗

NASA NTRS2003

Characterization of Polyimide Foams for Ultra-Lightweight Space Structures

Ultra-lightweight materials have played a significant role in nearly every area of human activity ranging from magnetic tapes and artificial organs to atmospheric balloons and space inflatables. The application range of ultra-lightweight materials in past decades has expanded dramatically due to their unsurpassed efficiency in terms of low weight and high compliance properties. A new generation of ultra-lightweight materials involving advanced polymeric materials, such as TEEK (TM) polyimide foams, is beginning to emerge to produce novel performance from ultra-lightweight systems for space applications. As a result, they require that special conditions be fulfilled to ensure adequate structural performance, shape retention, and thermal stability. It is therefore important and essential to develop methodologies for predicting the complex properties of ultra-lightweight foams. To support NASA programs such as the Reusable Launch Vehicle (RLV), Clark Atlanta University, along with SORDAL, Inc., has initiated projects for commercial process development of polyimide foams for the proposed cryogenic tank integrated structure (see figure 1). Fabrication and characterization of high temperature, advanced aerospace-grade polyimide foams and filled foam sandwich composites for specified lifetimes in NASA space applications, as well as quantifying the lifetime of components, are immensely attractive goals. In order to improve the development, durability, safety, and life cycle performance of ultra-lightweight polymeric foams, test methods for the properties are constant concerns in terms of timeliness, reliability, and cost. A major challenge is to identify the mechanisms of failures (i.e., core failure, interfacial debonding, and crack development) that are reflected in the measured properties. The long-term goal of the this research is to develop the tools and capabilities necessary to successfully engineer ultra-lightweight polymeric foams. The desire is to reduce density at the material and structural levels, while at the same time maintaining or increasing mechanical and other properties.

Meador, Michael↗

NASA NTRS1977

Atmospheric thermal structure during a winter anomaly absorption event

Temperature and wind profiles between 60 and 90 km were obtained during an anomalous wintertime absorption event. Data were collected by passive inflatable falling spheres deployed from meteorological rockets. The enhanced radio wave absorption is apparently associated with a well-defined mesopause near 84 km and a large inversion near 68 km; these readings suggest that both phenomena have been displaced to a level about 5 km lower than normal. In addition, colder than normal temperatures are recorded in the 55 to 72 km range during the anomalous conditions. The possible relationship between this change in the mesospheric temperature structure and the anomalous absorption and atmospheric radiative characteristics is discussed.

Olsen, R. O.↗

DOE OSTI2024

Simulated structure and thermodynamics of decagonal Al-Co-Cu quasicrystals

Atomic structures of Al-Co-Cu decagonal quasicrystals (dQCs) are investigated using empirical oscillating pair potentials (EOPP) in molecular dynamic (MD) simulations that we enhance by Monte Carlo (MC) swapping of chemical species and replica exchange. Predicted structures exhibit planar decagonal tiling patterns and are periodic along the perpendicular direction. We then recalculate the energies of promising structures using first-principles density functional theory (DFT), along with energies of competing phases. We find that our τ -inflated sequence of QC approximants (QCAs) are energetically unstable at low temperature by at least 3 meV/atom. Extending our study to finite temperatures by calculating harmonic vibrational entropy, as well as anharmonic contributions that include chemical species swaps and tile flips, our results suggest that the quasicrystal phase is entropically stabilized at temperatures in the range 600-800 K and above. It decomposes into ordinary (though complex) crystal phases at low temperatures, including a partially disordered B2-type phase. We discuss the influence of density and composition on QC phase stability; we compare the structural differences between Co-rich and Cu-rich quasicrystals; and we analyze the role of entropy in stabilizing the quasicrystal, concluding with a discussion of the possible existence of “high entropy” quasicrystals. Published by the American Physical Society 2024

Huang, Yang (ORCID:0009000045917347)↗

NASA NTRS1986

Structural concepts for large solar concentrators

Solar collectors for space use are examined, including both early designs and current concepts. In particular, attention is given to stiff sandwich panels and aluminum dishes as well as inflated and umbrella-type membrane configurations. The Sunflower concentrator is described as an example of a high-efficiency collector. It is concluded that stiff reflector panels are most likely to provide the long-term consistent accuracy necessary for low-orbit operation. A new configuration consisting of a Pactruss backup structure, with identical panels installed after deployment in space, is presented. It is estimated that concentration ratios in excess of 2000 can be achieved with this concept.

Hedgepeth, J. M.↗

NASA NTRS1991

Structural behavior of scientific balloons - Finite element simulation and verification

An off-the-shelf nonlinear finite element code was used to analyze fully inflated scientific balloons. The thin balloon film was modeled by shell bending elements. Numerical difficulties caused by insignificant bending stiffness terms were overcome by introducing some artificial bending stiffness. This approximation is justified by the fact that in thin shells with nonzero Gaussian curvature the membrane solution component is essentially independent of the bending solution component. Perturbation of the coveraged solution by increasing the bending stiffness by a full decade verified this assertion. This analytical approach was experimentally verified. As a result of this verification process it was discovered that the generally accepted linearly visco-elastic model for polyethylene film is inappropriate for a significant planar (as opposed to uniaxial) stress state. A linear elastic model presents a good approximation for planar stress states.

Schur, Willi W.↗

NASA NTRS1973

Meteoroid-detector deployment and pressurization systems

The Explorer 46 Meteoroid Technology Satellite (MTS) launched from Wallops Island, Va., August 13, 1972, was configured to fit within the Scout heat shield, 86.36 cm in diameter. In order to package within this envelope, the meteoroid bumper detector panels had to be rolled up unpressurized and secured to the spacecraft main structure. After the spacecraft was placed in orbit the panels were unrolled by a deployment system and inflated by a pressurization system.

Halliday, H. C.↗

NASA NTRS1960

A Manned Orbital Space Laboratory

A study is under way of a manned orbital space laboratory, some of the purposes of which would be to determine man's adaptability to space and to study structures and systems in space before committing manned spacecraft to long-range missions. It uses an inflatable torus as laboratory and living quarters and has an erectable solar collector as the source of heat for the power plant. The station rotates six times per minute in order to provide some artificial gravity together with stabilization. An escape taxi, which is not shown, is attached to the bottom of the station.

Emanuel Schnitzer↗

NASA NTRS2003

Dot-Projection Photogrammetry and Videogrammetry of Gossamer Space Structures

This paper documents the technique of using hundreds or thousands of projected dots of light as targets for photogrammetry and videogrammetry of gossamer space structures. Photogrammetry calculates the three-dimensional coordinates of each target on the structure, and videogrammetry tracks the coordinates versus time. Gossamer structures characteristically contain large areas of delicate, thin-film membranes. Examples include solar sails, large antennas, inflatable solar arrays, solar power concentrators and transmitters, sun shields, and planetary balloons and habitats. Using projected-dot targets avoids the unwanted mass, stiffness, and installation costs of traditional retroreflective adhesive targets. Four laboratory applications are covered that demonstrate the practical effectiveness of white-light dot projection for both static-shape and dynamic measurement of reflective and diffuse surfaces, respectively. Comparisons are made between dot-projection videogrammetry and traditional laser vibrometry for membrane vibration measurements. The paper closes by introducing a promising extension of existing techniques using a novel laser-induced fluorescence approach.

Pappa, Richard S.↗

NASA NTRS2000

TransHab: NASA's Large-Scale Inflatable Spacecraft

TransHab is a, 27-foot diameter by 40-foot, lightweight inflatable habitation module for space applications. TransHab consists of a lightweight graphite-composite core, 11-foot diameter by 23-foot tall, surrounded by a 27-foot diameter inflatable shell. Originally envisioned to be the habitation module of an interplanetary transit vehicle, TransHab is currently being considered as a module for use on the International Space Station (ISS). During the past two years, several tests have been performed at the NASA/Johnson Space Center to demonstrate and prove the technologies required in building a large-scale inflatable habitation module. This paper discusses the results of these tests which including the following: 1) a structural integrity development test article hydJ"Ostatically tested to four times ambient pressure, 2) a full-scale development test article manufactured, assembled, folded and deployed at vacuum, and 3) extensive hypervelocity impact testing of the micro meteoroid and orbital debris protection system.

delaFuente, Horacio↗