Search NASA⌕ Search

SEARCH · Search NASA

Results for “Jets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

How to Turn Jets into Cylinders near Supermassive Black Holes in 3D General Relativistic Magnetohydrodynamic Simulations

Abstract Accreting supermassive black holes (SMBHs) produce highly magnetized relativistic jets that tend to collimate gradually as they propagate outward. However, recent radio interferometric observations of the 3C 84 galaxy reveal a stunning, cylindrical jet already at several hundred SMBH gravitational radii,r≳ 350r g . We explore how such extreme collimation emerges via a suite of 3D general relativistic magnetohydrodynamic simulations. We consider an SMBH surrounded by a magnetized torus immersed in a constant-density ambient medium that starts at the edge of the SMBH sphere of influence, chosen to be much larger than the SMBH gravitational radius,r B = 10 3 r g . We find that radiatively inefficient accretion flows (e.g., M87) produce winds that collimate the jets into parabolas near the black hole. After the disk winds stop collimating the jets atr≲r B , they turn conical. Once outsider B , the jets run into the ambient medium and form backflows that collimate the jets into cylinders some distance beyondr B . Interestingly, for radiatively efficient accretion, as in 3C 84, the radiative cooling saps the energy out of the disk winds; at early times, they cannot efficiently collimate the jets, which skip the initial parabolic collimation stage, start out conical near the SMBH, and turn into cylinders already atr≃ 300r g , as observed in 3C 84. Over time, the jet power remains approximately constant, whereas the mass accretion rate increases; the winds grow in strength and start to collimate the jets, which become quasi-parabolic near the base, and the transition point to a nearly cylindrical jet profile moves outward while remaining insider B .

Astronomy & Astrophysics↗
DOE OSTI2025

Enhanced signal of momentum broadening in hard splittings for $γ$-tagged jets in a multistage approach

We investigate medium-induced modifications to jet substructure observables that characterize hard splitting patterns in central Pb-Pb collisions at the top energy of the Large Hadron Collider (LHC). Using a multistage Monte Carlo simulation of in-medium jet shower evolution, we explore flavor-dependent medium effects through simulations of inclusive and $γ$-tagged jets. The results show that quark jets undergo a non-monotonic modification compared to gluon jets in observables such as the Pb-Pb to $p$-$p$ ratio of the Soft Drop prong angle $r_g$, the relative prong transverse momentum $k_{T,g}$ and the groomed mass $m_g$ distributions. Due to this non-monotonic modification, $γ$-tagged jets, enriched in quark jets, provide surprisingly clear signals of medium-induced structural modifications, distinct from effects dominated by selection bias. This work highlights the potential of hard substructures in $γ$-tagged jets as powerful tools for probing the jet-medium interactions in high-energy heavy-ion collisions. All simulations for $γ$-tagged jet analyses carried out in this paper used triggered events containing at least one hard photon, which highlights the utility of these observables for future Bayesian analysis.

FOS: Physical sciences↗
NASA NTRS1976

Measurements of mean flow and acoustic power for a subsonic jet impinging normal to a large rigid surface

An experimental study was made to measure the mean flow field and acoustic power of a subsonic jet impinging normal to a large rigid surface. A 6.25 cm diameter, circular cool air jet was used at heights of 20, 10, and 5 jet diameters above the surface. The jet exit Mach number was varied from 0.28 to 0.93. Impact and static pressure surveys were made in directions both axial and lateral to the jet axis and also parallel and perpendicular to the surface. Acoustic power was calculated from microphone measurements made during each test run using a diffuse field calibration for the test facility. Results indicate that the flow field for jet impingement is characterized mainly by a strong rise in static pressure in the impingement region near the surface and by boundary layer development in the wall jet region. Acoustic power measurements generally followed a U(8) law for both the free jet and jet impingement although there was some variation especially at high Mach number and for close impingement distances. Overall noise levels increased with decreasing jet-to-surface height. Normalized power spectra correlated well for all cases when the Strouhal number was greater than 0.2; the correlation was poor when the Strouhal number was low.

Schloth, A. P.↗
NASA NTRS1976

An experimental study of the aeroacoustics of a subsonic jet impinging normal to a large rigid surface

This paper presents results from an experimental study of unsteady surface pressures and far-field noise produced by a subsonic jet impinging normal to a large, rigid, flat surface. The tests were performed in an anechoic room for jet Mach numbers from 0.54 to 0.85, and for jet-to-surface heights of from 5 to 10 jet diameters. Results showed that the root-mean-square surface pressure levels were proportional to jet dynamic pressure and were independent of jet height for radial distances from the stagnation point greater than 3 jet diameters. Far-field measurements indicated a significant increase in noise over that of a free jet for all cases of impingement. Cross spectral calculations between the surface and the far field suggested that at a Mach number of 0.70 and a height of 5 jet diameters the additional noise originated mainly in the outer edge of the impingement region between 1 and 3 jet diameters from the stagnation point.

Preisser, J. S.↗
NASA NTRS1979

Excess noise from supersonic underexpanded jets in flight. I

A combination of flow visualization and measurement of both the near and far-field radiated noise of supersonic underexpanded jets under simulated flight conditions has led to the identification of a mechanism of excess jet noise production. It was observed that large lateral oscillations were imparted to the entire jet by the complex interaction of the outer flow with the jet. These jet oscillations appeared to develop almost abruptly into large oscillations becoming fully developed at about 6 to 10 diameters downstream of the nozzle exit at a location where the jet became subsonic. This lateral jet motion was observed to be planar and was accompanied by the production of weak shock waves. These weak shock waves existed in 'localized' circumferential regions outside the jet, e.g., quadrants or portions thereof and traveled upstream. It was determined that the measured excess noise was produced by these weak shock waves. Neither the jet oscillations nor the excess noise existed when there was no outer flow around the supersonic underexpanded jet.

Sarohia, V.↗
NASA NTRS1950

Penetration of Air Jets Issuing from Circular, Square, and Elliptical Orifices Directed Perpendicularly to an Air Stream

An experimental investigation was conducted to determine the penetration of air jets d.irected perpendicularlY to an air stream. Jets Issuing from circular, square, and. elliptical orifices were investigated. and. the jet penetration at a position downstream of the orifice was determined- as a function of jet density, jet velocity, air-stream d.enaity, air-stream velocity, effective jet diameter, and. orifice flow coeffIcient. The jet penetrations were determined for nearly constant values of air-stream density at three tunnel-air velocities arid for a large range of Jet velocities and. densities. The results were correlated in terms of dimensionless parameters and the penetrations of the various shapes were compared. Greater penetration was obtained. with the square orifices and the elliptical orifices having an axis ratio of 4:1 at low tunnel-air velocities and low jet pressures than for the other orifices investigated. The square orifices gave the best penetrations at the higher values of tunnel-air velocity and jet total pressure.

Ruggeri, Robert S.↗
NASA NTRS1982

The role of coherent structures in the generation of noise for subsonic jets

Acoustic measurements were made in the 'near' (r/D 60, x/D 60) field for high Reynolds number (184,000 to 262,000) axisymmetric cold air jets exhausting at atmospheric pressure. These measurements were in conjunction with an investigation which characterized the large scale coherent structure in the flow field of Mach number 0.6 to 0.8 jets. Natural jets as well as artificially excited jets were studied. Directivity plots were made for both natural jets and jets excited at various frequencies. Overall noise radiated by the jets reached a maximum value around 30 deg from the jet axis. However, individual frequencies emitted maximum sound pressure level at different angles from the jet axis. As the angle from the jet axis increased, the spectra of the noise shifted to higher frequencies.

Morrison, G. L.↗
NASA NTRS1981

Experimental investigation of a jet inclined to a subsonic crossflow

Experimental investigations have been conducted to determine the surface-pressure distribution on a flat plate and a body of revolution with a jet issuing at a large angle to the free stream and to obtain a better understanding of the entrainment mechanism close to the jet exit by quantitative mean velocity surveys. Pressure data were obtained with a flat plate model at several nozzle injection angles using a single round nozzle. For the body of revolution model, data were obtained with a round jet exhausting perpendicular to the crossflow and with two round jets spaced two to six nozzle diameters apart. Mean velocity measurements were obtained with laser velocimeter surveys near the base of a round jet exhausting normal to a flat plate. For the flat plate model, the pressure field shifts downstream and the entrainment effect decreases with decreasing nozzle injection angle. For the body of revolution model with two jets, the jet-induced effect of the rear jet on the surface-pressure distribution was less than the front jet. The flow regions close to the jet are defined by the laser surveys, but further mean velocity surveys are required to understand the entrainment mechanism.

Aoyagi, K.↗
NASA NTRS1984

The effect of forward flight on the noise and flow field of inverted profile jets

Noise and flow field measurements are reported for an inverted profile coannular jet (where the annular jet speed exceeds the center jet speed) under simulated flight conditions. The annular and center jets were cold and both were operated subsonically. Forward flight was simulated by placing the coannular jet inside a larger open jet. Acoustic measurements show the effects of inverted profile shape and simulated flight on far field directivity, total radiated power, and spectral content. Measurements of total acoustic power demonstrate that the acoustic efficiency of inverted profile jets is about 3 dB less than the efficiency of 'top hat' profile jets, and that the noise decreases as the seventh power of the relative jet velocity in the limit of small flight velocity. Flow measurements demonstrate that the jet spreading parameter scales the thickness of the outer shear layer and the passage frequencies of the large turbulence scales. Comparisons between the turbulence time scales and the noise spectra suggest that coherent noise sources may become more important in forward flight.

Petersen, R. A.↗
NASA NTRS1986

Dual rectangular jets from a flat plate in a crossflow

Wind tunnel tests were carried out in order to study the single and dual rectangular crossflow jets injected from a flat plate perpendicular to a free stream. The length-to-width ratio of the jets was 3.97, and the spacing between the center lines was 4.7 times the width of a single jet. Surface pressure distributions were obtained for jet-to-freestream velocity ratios of 2.2 and 4, respectively. The following conclusions are offered on the basis of the experimental results: (1) the downstream extension of the negative pressures is extended to the dual jets in comparison to the single jet; (2) by increasing the jet-to-freestream velocity ratio the downstream extension of negative pressures is reduced, but negative upstream pressures become larger; (3) very high peak negative pressures occur at the front side edges of the rectangular jets compared to round jets. Velocity vector plots in the flowfield of the dual jets are given.

Kavsaoglu, M.↗
NASA NTRS1991

An experimental study of natural and forced modes in an axisymmetric jet

The experiment consisted of two parts. The first part was an effort to study naturally occurring instability modes in the axisymmetric shear layer of a high Reynolds number turbulent jet. Untripped (transitional) and tripped (turbulent) nozzle exit conditions, both with 0.1 percent core turbulence, were studied. For the turbulent nozzle exit boundary layer case, the core turbulence, was varied systematically from 0.1 to 5 percent of the jet exit velocity. The region up to the end of the potential core was dominated by the axisymmetric mode. The azimuthal modes grew rapidly but dominated only downstream of the potential core region. For the jet excited by natural disturbances, the energy content of the higher order modes (m is less than 1) was significantly lower than that of the axisymmetric and m = +/-1 modes. The initial boundary layer had a profound effect on the natural jet evolution and its excitability. The shorter potential core allowed the jet in the transitional case to support helical disturbances closer the nozzle exit than the turbulent case. The natural jet evolution was found to remain unaffected for varying initial core turbulence over the range of 0.15 to 5 percent of the jet velocity. Target modes for efficient excitation of the jet were determined from the results of the naturally occurring jet instability mode experiments. The second part of this work describes an effort to control the axisymmetric shear layer by artificially exciting target modes. Under optimum conditions, two-frequency excitation is indeed more effective than single frequency plane wave excitation as far as jet mixing is concerned. At high amplitudes of fundamental and subharmonic forcing, the subharmonic augmentation and the axial location of the peak were independent of the initial phase difference. Two-frequency excitation also has its limitations, since axisymmetric waves are damped beyond the potential core. Higher spreading rates are obtained when multi-modal forcing is applied.

Raman, Ganesh↗
NASA NTRS1992

Supersonic jet mixing enhancement by delta-tabs

The results of a continuing investigation of the effect of vortex generators, in the form of small tabs at the nozzle exit, on the evolution of a jet are reported. Primarily, tabs of triangular shape are considered, and the effect is studied up to an equivalent jet Mach number of 1.8. By changing the orientation of the tab with respect to the nozzle exit plane, streamwise vortex pairs of opposite sign were generated. This resulted in either an outward election of jet core fluid into the ambient or an inward indentation of the mixing layer into the core of the jet. A triangular shaped tab with its apex leaning downstream, referred to as a delta tab, was found to be the most effective in influencing the jet evolution. Two delta tabs, spaced 180 degrees apart, completely bifurcated the jet. Four delta tabs increased jet mixing substantially, more than by various other methods tried previously; the mass flux at fourteen jet diameters downstream from the nozzle increased by about 50 percent over that for the no tab case. The tabs were found to be effective in jets with laminar or turbulent boundary layers as well as in jets with low or high core turbulence intensities.

Zaman, K. B. M. Q.↗
NASA NTRS1992

Supersonic jet mixing enhancement by 'delta-tabs'

The results of a continuing investigation of the effect of vortex generators, in the form of small tabs at the nozzle exit, on the evolution of a jet are reported. Primarily, tabs of triangular shape are considered, and the effect is studied up to an equivalent jet Mach number of 1.8. By changing the orientation of the tab with respect to the nozzle exit plane, streamwise vortex pairs of opposite sign were generated. This resulted in either an outward selection of jet core fluid into the ambient or an inward indentation of the mixing layer into the core of the jet. A triangular shaped tab with its apex leaning downstream, referred to as a delta tab, was found to be the most effective in influencing the jet evolution. Two delta tabs, spaced 180 degrees apart, completely bifurcated the jet. Four delta tabs increased jet mixing substantially, more than by various other methods tried previously; the mass flux at fourteen jet diameters downstream from the nozzle increased by about 50 percent over that for the no tab case. The tabs were found to be effective in jets with laminar or turbulent boundary layers as well as in jets with low or high core turbulence intensities.

Zaman, K. B. M. Q.↗
NASA NTRS1992

On the scaling of small-scale jet noise to large scale

An examination was made of several published jet noise studies for the purpose of evaluating scale effects important to the simulation of jet aeroacoustics. Several studies confirmed that small conical jets, one as small as 59 mm diameter, could be used to correctly simulate the overall or PNL noise of large jets dominated by mixing noise. However, the detailed acoustic spectra of large jets are more difficult to simulate because of the lack of broad-band turbulence spectra in small jets. One study indicated that a jet Reynolds number of 5 x 10 exp 6 based on exhaust diameter enabled the generation of broad-band noise representative of large jet mixing noise. Jet suppressor aeroacoustics is even more difficult to simulate at small scale because of the small mixer nozzles with flows sensitive to Reynolds number. Likewise, one study showed incorrect ejector mixing and entrainment using small-scale, short ejector that led to poor acoustic scaling. Conversely, fairly good results were found with a longer ejector and, in a different study, with a 32-chute suppressor nozzle. Finally, it was found that small-scale aeroacoustic resonance produced by jets impacting ground boards does not reproduce at large scale.

Soderman, Paul T.↗
NASA NTRS1993

Development of phased twin flip-flop jets

The flip-flop nozzle is a device that can produce an oscillating jet flow without any moving parts. There is now a renewed interest in such nozzles due to their potential for use as excitation devices in practical applications. An experiment aimed at developing twin flip-flop jets that operate at prescribed frequencies and phase differences was performed. The phasing was achieved using two different nozzle interconnection schemes. In one configuration the two jets flapped in-phase and in another they flapped out-of-phase with respect to each other. In either configuration the frequencies of oscillation of both jets were equal. When one of the jets was run at a constant high velocity and the velocity of the second jet was increased gradually, the higher velocity jet determined the frequency of oscillation of both jets. The two flip-flop jet configurations described could be used to excite a primary jet flow in either an anti-symmetric (sinuous) or a symmetric (varicose) mode.

Raman, Ganesh↗
NASA NTRS1994

CFD Assessment of Orifice Aspect Ratio and Mass Flow Ratio on Jet Mixing in Rectangular Ducts

Isothermal CFD analysis was performed on axially opposed rows of jets mixing with cross flow in a rectangular duct. Laterally, the jets' centerlines were aligned with each other on the top and bottom walls. The focus of this study was to characterize the effects of orifice aspect ratio and jet-to-mainstream mass flow ratio on jet penetration and mixing. Orifice aspect ratios (L/W) of 4-to-1, 2-to-1, and 1-to-1, along with circular holes, were parametrically analyzed. Likewise, jet-to-mainstream mass flow ratios (MR) of 2.0, 0.5, and 0.25 were systematically investigated. The jet-to-mainstream momentum-flux ratio (J) was maintained at 36 for all cases, and the orifice spacing-to-duct height (S/H) was varied until optimum mixing was attained for each configuration. The numerical results showed that orifice aspect ratio (and likewise orifice blockage) had little effect on jet penetration and mixing. Based on mixing characteristics alone, the 4-to-1 slot was comparable to the circular orifice. The 4-to-1 slot has a smaller jet wake which may be advantageous for reducing emissions. However, the axial length of a 4-to-1 slot may be prohibitively long for practical application, especially for MR of 2.0. The jet-to-mainstream mass flow ratio had a more significant effect on jet penetration and mixing. For a 4-to-1 aspect ratio orifice, the design correlating parameter for optimum mixing (C = (S/H)(sq. root J)) varied from 2.25 for a mass flow ratio of 2.0 to 1.5 for a mass flow ratio of 0.25.

Bain, D. B.↗
NASA NTRS1992

On the scaling of small-scale jet noise to large scale

An examination was made of several published jet noise studies for the purpose of evaluating scale effects important to the simulation of jet aeroacoustics. Several studies confirmed that small conical jets, one as small as 59 mm diameter, could be used to correctly simulate the overall or perceived noise level (PNL) noise of large jets dominated by mixing noise. However, the detailed acoustic spectra of large jets are more difficult to simulate because of the lack of broad-band turbulence spectra in small jets. One study indicated that a jet Reynolds number of 5 x 10(exp 6) based on exhaust diameter enabled the generation of broad-band noise representative of large jet mixing noise. Jet suppressor aeroacoustics is even more difficult to simulate at small scale because of the small mixer nozzles with flows sensitive to Reynolds number. Likewise, one study showed incorrect ejector mixing and entrainment using a small-scale, short ejector that led to poor acoustic scaling. Conversely, fairly good results were found with a longer ejector and, in a different study, with a 32-chute suppressor nozzle. Finally, it was found that small-scale aeroacoustic resonance produced by jets impacting ground boards does not reproduce at large scale.

Soderman, Paul T.↗
NASA NTRS1994

An extended source for CN jets in Comet P/Halley

We examined radial intensity profiles of CN jets in comparison with the diffuse, isotropic component of the CN coma of Comet P/Halley. All images were bias-subtracted, flat-fielded, and continuum-subtracted. We calculated the diffuse profiles by finding the azimuthal mean of the coma least contaminated by jets yielding profiles similar to those of vectorial and Haser models of simple photodissociation. We found the jet profiles by calculating a mean around a Gaussian-fitted center in r-theta space. There is an unmistakable difference between the profiles of the CN jets and the profiles of the diffuse CN. Spatial derivatives of these profiles, corrected for geometrical expansion, show that the diffuse component is consistent with a simple photodissociation process, but the jet component is not. The peak production of the jet profile occurs 6000 km from the nucleus at a heliocentric distance of 1.4 AU. Modeling of both components of the coma indicate results that are consistent with the diffuse CN photochemically produced, but the CN jets need an additional extended source. We found that about one-half of the CN in the coma of Comet P/Halley originated from the jets, the rest from the diffuse component. These features, along with the width of the jet being approximately constant, are consistent with a CHON grain origin for the jets.

Klavetter, James Jay↗