Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Fundamental origin of the large impact of strain on superconducting Nb 3 Sn

We report that superconductors can carry very high current densities without resistive loss. This makes them highly suitable for the construction of compact high field magnets of several tens of tesla. However, with increasing current density and magnetic field come high Lorentz loads and high strain levels, and it is empirically known that superconducting properties are affected by strain. The superconducting properties of the most commonly used high field material, Nb 3 Sn, are particularly badly affected by strain. Here we demonstrate that strain causes significant sub-lattice distortion in the A15 lattice structure of Nb 3 Sn, and show how this leads to the relatively large reduction of its superconducting properties. The changes are found to be primarily due to changes in the electron density of states, with a lesser contribution due to changes in the phonon spectrum. The amount of sub-lattice distortion further depends on crystal orientation. In conclusion, these findings suggest that it is possible to mitigate the reduction of the current carrying capacity by strain through crystal alignment and sub-lattice stabilization. This would enable superconducting magnets to reach a significantly higher magnetic field, and ease their construction by simplifying react-and-wind coil fabrication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Applications of Artificial Neural Networks in Structural Engineering with Emphasis on Continuum Models

The use of continuum models for the analysis of discrete built-up complex aerospace structures is an attractive idea especially at the conceptual and preliminary design stages. But the diversity of available continuum models and hard-to-use qualities of these models have prevented them from finding wide applications. In this regard, Artificial Neural Networks (ANN or NN) may have a great potential as these networks are universal approximators that can realize any continuous mapping, and can provide general mechanisms for building models from data whose input-output relationship can be highly nonlinear. The ultimate aim of the present work is to be able to build high fidelity continuum models for complex aerospace structures using the ANN. As a first step, the concepts and features of ANN are familiarized through the MATLAB NN Toolbox by simulating some representative mapping examples, including some problems in structural engineering. Then some further aspects and lessons learned about the NN training are discussed, including the performances of Feed-Forward and Radial Basis Function NN when dealing with noise-polluted data and the technique of cross-validation. Finally, as an example of using NN in continuum models, a lattice structure with repeating cells is represented by a continuum beam whose properties are provided by neural networks.

Kapania, Rakesh K.↗

The role of chemical structure on the magnetic and electronic properties of Co{sub 2}FeAl{sub 0.5}Si{sub 0.5}/Si(111) interface

We show that Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} film deposited on Si(111) has a single crystal structure and twin related epitaxial relationship with the substrate. Sub-nanometer electron energy loss spectroscopy shows that in a narrow interface region there is a mutual inter-diffusion dominated by Si and Co. Atomic resolution aberration-corrected scanning transmission electron microscopy reveals that the film has B2 ordering. The film lattice structure is unaltered even at the interface due to the substitutional nature of the intermixing. First-principles calculations performed using structural models based on the aberration corrected electron microscopy show that the increased Si incorporation in the film leads to a gradual decrease of the magnetic moment as well as significant spin-polarization reduction. These effects can have significant detrimental role on the spin injection from the Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} film into the Si substrate, besides the structural integrity of this junction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Comparison Study of Offshore Wind Support Structures with Monopiles and Jackets for U.S. Waters: Preprint

U.S. experience in offshore wind is limited, and high costs are expected unless innovations are introduced in one or multiple aspects of the project, from the installed technology to the balance of system (BOS). The substructure is the main single component responsible for the BOS capital expenditure (CapEx) and thus one that, if improved, could yield significant levelized cost of energy (LCOE) savings. For projects in U.S. waters, multimember, lattice structures (also known as jackets) can render required stiffness for transitional water depths at potentially lower costs than monopiles (MPs). In this study, we used a systems engineering approach to evaluate the LCOE of prototypical wind power plants at six locations along the eastern seaboard and the Gulf of Mexico for both types of support structures. Using a reference wind turbine and actual metocean conditions for the selected sites, we calculated loads for a parked and an operational situation, and we optimized the MP- and jacket-based support structures to minimize their overall mass. Using a suite of cost models, we then computed their associated LCOE. For all water depths, the MP-based configurations were heavier than their jacket counterparts, but the overall costs for the MPs were less than they were for jackets up to depths of slightly less than 30 m. When the associated manufacturing and installation costs were included, jackets resulted in lower LCOE for depths greater than 40 m. These results can be used by U.S. stakeholders to understand the potential for different technologies at different sites, but the methodology illustrated in this study can be further employed to analyze the effects of innovations and design choices throughout wind power plant systems.

17 WIND ENERGY↗

Thickness dependent itinerant ferromagnetism in ultrathin Ba-doped SrRu O 3 films

The electronic and magnetic properties in AB⁢O 3 perovskite oxides are extremely sensitive to lattice structure, but also to dimensionality, such as the thickness in thin film-form. Here, we report the thickness-dependent electromagnetic properties of ultrathin epitaxially stabilized Sr 1-x ⁢Ba x ⁢Ru⁢O 3 (x = 0.08, 0.2) thin films on a SrTi⁢O 3 (001) substrate. The results reveal that the barium doping (0.08 ≤ x ≤ 0.20) reduces Ru⁢O 6 orthorhombic distortions existing in SrRu⁢O 3 and induces a tetragonal distortion, as evidenced by out-of-plane lattice expansion. A metal-to-insulator transition, accompanied by a ferromagnetic to nonmagnetic transition occurs with reducing film thickness from 10 to 3 unit cells for both x = 0.08 and 0.2, regardless of the doping level. The results suggest that the effects of compositional vacancies and surface/interface contributions introduced via dimensional confinement are more dominant than A-site chemical disorder or structural distortion for the loss of metallicity and ferromagnetism in ultra-thin epitaxial films.

36 MATERIALS SCIENCE↗

Structural Optimization of a Direct-Drive Wind Turbine Generator Inspired by Additive Manufacturing

This study explores the structural freedom and design opportunities of additive manufacturing for a 5-MW direct-drive generator for a wind turbine and compares it to more traditional spoke-arm designs using NREL's GeneratorSE. The work focuses on light-weighting the stator within the generator, complementing previous rotor work. The light-weighting approach uses complex geometries and lattice structures made possible by additive manufacturing to realize increased strength with reduced mass. By reducing the mass at the top of the tower, wind turbines face lower loading along with decreased cost and improved structural stability. Furthermore, an altered bedplate support location facilitates lighter stator designs by better load transfer. Design optimization suggests additive manufacturing has the potential to transform generator designs to realize light-weighting. Since these machines are large, simulation and modeling are essential first steps before future experimental validation.

17 WIND ENERGY↗

Structure Sensitive Reaction Kinetics of Chiral Molecules on Intrinsically Chiral Surfaces

Enantiospecific heterogeneous catalysis utilizes chiral surfaces to resolve enantiomers via structure sensitive surface chemistry. The catalyst design challenge is the identification of chiral surface structures that maximize enantiospecificity. Herein, we develop data driven models for the enantiospecificity of tartaric acid reactions on chiral Cu(hkl) R&S surfaces. Measurements of enantiospecific rate constants were obtained by using curved Cu(hkl) R&S surfaces that enable kinetic measurements on hundreds of chiral surface orientations. One model uses feature vectors derived from generalized coordination numbers to capture the local structure around Cu atoms exposed by the Cu(hkl) R&S surfaces. The second model introduces the use of chiral cubic harmonic functions to capture the symmetry constraints of the face-centered cubic Cu structure. The model using 58 generalized coordination numbers has a fitting error similar to that of the model using only 5 cubic harmonic functions. The two models predict maxima in the enantiospecificity on surfaces with very similar surface orientations. The models developed in this work are applicable for any enantiospecific reaction happening on any chiral material with a cubic lattice structure, opening the way to understanding the surface structure sensitivity of the enantiospecific reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lattice distortions and octahedral rotations in epitaxially strained LaNiO{sub 3}/LaAlO{sub 3} superlattices

Using a complementary combination of x-ray diffraction and atomically resolved imaging we investigated the lattice structure of epitaxial LaNiO{sub 3}/LaAlO{sub 3} superlattices grown on a compressive-strain inducing LaSrAlO{sub 4} (001) substrate. A refinement of the structure obtained from the x-ray data revealed the monoclinic I 2/c 1 1 space group. The (Ni/Al)O{sub 6} octahedral rotation angle perpendicular to the superlattice plane is enhanced, and the one parallel to the plane is reduced with respect to the corresponding bulk values. High-angle annular dark field imaging was used to determine the lattice parameters within the superlattice unit cell. High-resolution electron microscopy images of the oxygen atoms are consistent with the x-ray results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dual‐Scale Nanostructures via Evaporative Assembly

Abstract Dual‐scale hierarchical structures with regular microscale patterns and varying degree of nanoscale crystalline order are synthesized on physically and chemically homogeneous substrates by evaporative self‐assembly with a suspension of DNA‐functionalized nanoparticles (NPs) with a charged core shell. For a certain NP concentration range, periodic concentric rings in a stripe‐like micropattern are produced over macroscale surface areas by an NP monolayer with hexagonal lattice structure at the nanoscale. The stripe width, spacing, and nanoparticle ordering can be controlled by varying the NP concentration. The results indicate that the interplay between “stick‐slip” motion of the droplet contact line and coulombic and steric NP interactions control the formation of the observed structures. A simple analytical model is proposed to account for the experimental observations and guide the future design of different nanostructure morphologies. This work demonstrates a simple cost‐effective mask‐free method for fabricating large‐area nanostructured 2D materials and metasurfaces for applications ranging from energy conversion/storage to optoelectronics and nanophotonics.

Srivastava, Sunita↗

Triblock Colloids for Directed Self-Assembly

Methods for functionalizing micrometer-sized colloidal spheres with three or more zones of chemical functionality (ABA or ABC) are described. To produce ABA triblock colloids, we functionalized the north pole, south pole, and equator to produce what we call X, Y, and K functionality according to the number of allowed nearest neighbors and their spatial arrangements. Furthermore, these synthesis methods allowed targeting of various lattice structures whose bonding between neighboring particles in liquid suspension was visualized in situ by optical microscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Electrokinetics of Oxygen Electrodes in Solid Oxide Electrolyzer Cells

A microscale model is presented in this study to simulate electrode kinetics of the oxygen electrode in a solid oxide electrolyzer cell (SOEC). Two mixed ionic/electronic conducting structures are examined for the oxygen producing electrode in this work: single layer porous lanthanum strontium cobalt ferrite (LSCF), and bilayer LSCF/SCT (strontium cobalt tantalum oxide) structures. A yttrium-stabilized zirconia (YSZ) electrolyte separates the hydrogen and oxygen electrodes, as well as a gadolinium doped-ceria (GDC) buffer layer on the oxygen electrode side. Electrochemical reactions occurring at the two-phase boundaries (2PBs) and three-phase boundaries (3PBs) of single-layer LSCF and bilayer LSCF/SCT oxygen electrodes are modeled under various SOEC voltages with lattice oxygen stoichiometry as the key output. The results reveal that there exists a competition in electrode kinetics between 2PBs and 3PBs, but 3PBs are the primary reactive sites for single-layer LSCF oxygen electrode under high voltages. These locations experience the greatest oxygen stoichiometry variations and are therefore the most likely locations for dimensional changes. By applying an active SCT layer over LSCF, the 2PBs become activated to compete with the 3PBs, thus alleviating oxygen stoichiometry variations and reducing the likelihood of dimensional change. This strategy could reduce lattice structural expansion, proving to be valuable for electrode-electrolyte delamination prevention and will be the focus of future work.

30 DIRECT ENERGY CONVERSION↗

CO 2 electro-reduction on Cu 3 P: Role of Cu(I) oxidation state and surface facet structure in C 1 -formate production and H 2 selectivity

We report the catalytic activity and mechanism of copper(I) phosphide, Cu 3 P, with predominant [00Ι] facet exposure for the electrochemical reduction of CO 2 (CO 2 RR) to formic acid. Crystalline nanosheets of this compound that show a preferential [00Ι] facet orientation exhibit undiminished CO 2 RR activity after 16 hours with full retention of crystal structure and surface chemical speciation and no detectable corrosion. In contrast to the range of products formed on Cu metal, CuO, and Cu 2 O, the CO 2 RR on Cu 3 P [00Ι] produces mainly hydrogen and formate as the sole carbon product in KHCO 3 electrolyte. Analysis of the Cu 3 P [00Ι] facet by HAADF-STEM was used to determine the surface lattice structure, while both XPS and Auger spectroscopies were used to determine the surface chemical speciation from the kinetic energies of ionized electrons. The presented analysis identifies isolated trigonal CuP 3 sites on the Cu 3 P[00Ι]-Cu 3 P 3 terminated surface and the Cu(I) oxidation state as precursor to the active catalyst. The CO 2 RR selectivity to formate and the higher turnover rate for H 2 production on the [00Ι] facet allows a structure-activity analysis and chemical mechanism to be proposed. Formation of a surface hydride at isolated *H-CuP 3 sites is proposed as the catalytic site in forming both H 2 and formate, while the long Cu—Cu separation retards forming C-C coupling products. In conclusion, these results disprove previously published claims of Cu(I) oxidation state as a sufficient criterion to promote CO 2 RR to C 2+ products, show that stronger bonded hydrides, *H-CuP 3 on Cu 3 P, favor production of the C1 product formate over all other carbon products, and predict that stronger formate binding (bidentate) is needed for CO 2 RR currents to compete with H 2 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying redox heterogeneity in single-crystalline LiCoO 2 cathode particles

Active cathode particles are fundamental architectural units for the composite electrode of Li-ion batteries. The microstructure of the particles has a profound impact on their behavior and, consequently, on the cell-level electrochemical performance. LiCoO 2 (LCO, a dominant cathode material) is often in the form of well-shaped particles, a few micrometres in size, with good crystallinity. In contrast to secondary particles (an agglomeration of many fine primary grains), which are the other common form of battery particles populated with structural and chemical defects, it is often anticipated that good particle crystallinity leads to superior mechanical robustness and suppressed charge heterogeneity. Yet, sub-particle level charge inhomogeneity in LCO particles has been widely reported in the literature, posing a frontier challenge in this field. Herein, this topic is revisited and it is demonstrated that X-ray absorption spectra on single-crystalline particles with highly anisotropic lattice structures are sensitive to the polarization configuration of the incident X-rays, causing some degree of ambiguity in analyzing the local spectroscopic fingerprint. To tackle this issue, a methodology is developed that extracts the white-line peak energy in the X-ray absorption near-edge structure spectra as a key data attribute for representing the local state of charge in the LCO crystal. This method demonstrates significantly improved accuracy and reveals the mesoscale chemical complexity in LCO particles with better fidelity. In addition to the implications on the importance of particle engineering for LCO cathodes, the method developed herein also has significant impact on spectro-microscopic studies of single-crystalline materials at synchrotron facilities, which is broadly applicable to a wide range of scientific disciplines well beyond battery research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Synthesis and Magnetic Properties of Fe–Co–Ni/С Nanocomposites

Nanoparticles of the Fe–Co–Ni ternary alloy, encapsulated in the carbon matrix of nanocomposites, have been synthesized, The structure, phase composition, and magnetic properties of the obtained materials have been determined with the help of diffractometry and magnetometry. It has been established that nanoparticles of the ternary alloy are formed due to solution of cobalt in the Fe–Ni alloy. The composition of the nanoparticles of the alloy depends on the mass percent ratio of the metas in the precursor. With growth of the iron content, nanoparticles of the ternary alloy with various composition are formed with FCC and BCC crystal lattice structure. As the synthesis temperature and relative iron content are increased, the magnetization of the Fe–Co–Ni/C nanocomposites increases from 26 to 157 A·m{sup 2}/kg. The coercive force is determined by the synthesis temperature, the size of the nanoparticles, and the composition of the alloy, and its value varies from 330 to 43 Oe.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Exploration, Prediction, and Experimental Verification of Structure and Optoelectronic Properties in I 2 -Eu-IV-X 4 (I = Li, Cu, Ag; IV = Si, Ge, Sn; X = S, Se) Chalcogenide Semiconductors

Recently, there has been extensive research into photovoltaic, thermoelectric, and nonlinear optical applications of chalcogenide semiconductors within the large set of defect-resistant I 2 -II-IV-X4 (I = Li, Cu, Ag; II = Ba, Sr, Eu, Pb; IV = Si, Ge, Sn; X = S, Se) compounds. Five Eu-including compounds have previously been reported within this family, but a comparative study of possible structures and electronic properties of all 18 Eu-based combinations is still absent. Herein, we use hybrid density functional theory to study rare-earth-including I 2 -II-IV-X 4 semiconductors with Eu on the II site, in order to further understand this family and test the geometric tolerance factor approach (reported in our previous work) as a tool for predicting potential stable structures. We investigate how the exchange mixing parameter of the HSE06 density functional, α, affects the energetic positions of electronic levels, especially of the localized f-electron orbitals near the band edges of the extended semiconductor structures, using literature photoemission and band gap data of EuS for comparison. Lowest-energy quaternary structure candidates, energy band structures, and densities of states are computationally predicted for all 18 materials. Based on its predicted photovoltaics-relevant band gap, the previously unknown compound Cu 2 EuSnSe 4 was selected and synthesized. Furthermore, the experimental structure, lattice parameters, and band gap of Cu 2 EuSnSe 4 are consistent with the computational predictions, confirming a 1.55 eV band gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen Purification in Palladium-Based Membranes: An Operando X-ray Diffraction Study

Palladium (Pd)-based membranes are highly selective to H 2 , compact, and operationally flexible, and they could facilitate efficient and on-demand production of H 2 as a clean energy carrier. For the first time, we designed an operando X-ray diffraction (XRD) experiment to study a dense Pd membrane during H 2 permeation at typical operating conditions (e.g., 280–440 °C and 1–3 bar pressure difference). By correlating the lattice structure of a metallic membrane with its gas-separation performance in real time, the operando XRD experiment could serve as a diagnostic tool for research on high-temperature gas-separation membranes. As a proof-of-concept study, we simultaneously collected H 2 -flux and transmission-XRD measurements, from which we calculated key hydrogen-transport properties, including permeability, solubility, and diffusivity. We also showed that the Pd lattice remained in the α phase throughout the operating conditions investigated. Furthermore these results are in reasonable agreement with the literature.

36 MATERIALS SCIENCE↗

STRUCTURAL INTERACTIONS OF HYDROGEN WITH BULK AMORPHOUS MICROSTRUCTURES IN METALLIC SYSTEMS UNDERSTANDING THE ROLE OF PARTIAL CRYSTALLINITY ON PERMEATION AND EMBRITTLEMENT

The development of metallic glasses in bulk form has led to a resurgence of interest into the utilization of these materials for a variety of applications. A potentially exciting application for these bulk metallic glass (BMG) materials is their use as composite membranes to replace high cost Pd/Pd-alloy membranes for enhanced gas separation processes. One of the major drawbacks to the industrial use of Pd/Pd-alloy membranes is that during cycling above and below a critical temperature an irreversible change takes place in the palladium lattice structure which can result in significant damage to the membrane. Furthermore, the cost associated with Pd-based membranes is a potential detractor for their continued use and BMG alloys offer a potentially attractive alternative. Several BMG alloys have been shown to possess high permeation rates, comparable to those measured for pure Pd metal. In addition, high strength and toughness when either in-situ or ex-situ second phase dispersoids are present. Both of these properties, high permeation and high strength/toughness, potentially make these materials attractive for gas separation membranes that could resist hydrogen 'embrittlement'. However, a fundamental understanding of the relationship between partially crystalline 'structure'/devitrification and permeation/embrittlement in these BMG materials is required in order to determine the operating window for separation membranes and provide additional input to the material synthesis community for improved alloy design. This project aims to fill the knowledge gap regarding the impact of crystallization on the permeation properties of metallic glass materials. The objectives of this study are to (i) determine the crystallization behavior in different gas environments of Fe and Zr based commercially available bulk metallic glass and (ii) quantify the effects of partial crystallinity on the hydrogen permeation properties of these metallic glass membranes.

08 HYDROGEN↗

Competing magnetic phases in Cr 3+𝛿 ⁢Te 4 are spatially segregated

Cr 1+𝑥⁢ Te 2 is a self-intercalated van der Waals system that is of current interest for its room-temperature room-temperature ferromagnetic (FM) phases and tunable topological properties. In bulk samples, the strain from the interstitial Cr ions leads to distinct structural phases for different ranges of 𝑥. Early neutron powder diffraction (NPD) measurements on the monoclinic phase Cr 3 ⁢Te 4 (𝑥=0.5) presented evidence for competing FM and antiferromagnetic (AFM) phases. Here we apply neutron diffraction to a single crystal of Cr 3+𝛿 ⁢Te 4 with 𝛿=−0.10 and discover that it consists of two distinct monoclinic phases, one with FM order below 𝑇 C ≈321 K and another that develops AFM order below 𝑇 N ≈86 K. In contrast, we find that a crystal with 𝛿=−0.26 exhibits only FM order below 𝑇 C ≈285 K. The single-crystal analysis is complemented by results obtained with NPD, x-ray powder diffraction, and transmission electron microscopy (TEM) measurements on the 𝛿=−0.10 composition. From observations of spontaneous magnetostriction of opposite sign at 𝑇 C and 𝑇 N , along with the TEM evidence for both monoclinic phases in a single thin ( ≈100 nm) grain, we conclude that the two phases must have a fine-grained ( ≲100 nm) intergrowth character, as might occur from high-temperature spinodal decomposition during the growth process. Calculations of the relaxed lattice structures for the FM and AFM phases with density functional theory provide a rationalization of the observed spontaneous magnetostrictions. Correlations between the magnitude and orientation of the magnetic moments with lattice parameter variation demonstrate that the magnetic orders are sensitive to strain, thus explaining why magnetic ordering temperatures and anisotropies can be different between bulk and thin-film samples, when the latter are subject to epitaxial strain. Our results point to the need to investigate the supposed coexistence FM and AFM phases reported elsewhere in the Cr 1+𝑥 ⁢Te 2 system, such as in the Cr 5 ⁢Te 8 phase (𝑥=0.25).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗