Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC RIGIDITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

The rigidity dependence of cosmic ray solar modulation

Continuous particle flux measurements above rigidity thresholds of 1.2, 2.2, 5.5 and 11 GV were made by using the thresholds of two Cerenkov detectors aboard the ISEE-3 spacecraft. The ISEE-3 was launched in August 1978, near the beginning of the current solar cycle's heavy modulation phase, and the data presented represent the first direct measurement made at these energies with such a long time base. The measured long term modulation rigidity spectrum is compared with other data and with the spectrum of Forbush decreases, and it is found that the agreement between electron and positively charged particle results must be considered a constraint on cosmic ray modulation models involving the mechanism of gradient and curvature drift in the interplanetary magnetic field.

Evenson, P.↗

Rotational stability of a long field-reversed configuration

Rotationally driven modes of long systems with dominantly axial magnetic field are considered. We apply the incompressible model and order axial wavenumber small. A recently developed gyro-viscous model is incorporated. A one-dimensional equilibrium is assumed, but radial profiles are arbitrary. The dominant toroidal (azimuthal) mode numbers ℓ=1 and ℓ=2 modes are examined for a variety of non-reversed (B) and reversed profiles. Previous results for both systems with rigid rotor equilibria are reproduced. New results are obtained by incorporation of finite axial wavenumber and by relaxing the assumption of rigid electron and ion rotation. It is shown that the frequently troublesome ℓ=2 field reversed configuration (FRC) mode is not strongly affected by ion kinetic effects (in contrast to non-reversed cases) and is likely stabilized experimentally only by finite length effects. It is also shown that the ℓ=1 wobble mode has a complicated behavior and is affected by a variety of configuration and profile effects. The rotationally driven ℓ=1 wobble is completely stabilized by strong rotational shear, which is anticipated to be active in high performance FRC experiments. Thus, observed wobble modes in these systems are likely not driven by rotation alone.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analyses and tests for design of an electro-impulse de-icing system

De-icing of aircraft by using the electro-magnetic impulse phenomenon was proposed and demonstrated in several European countries. However, it is not available as a developed system due to lack of research on the basic physical mechanisms and necessary design parameters. The de-icing is accomplished by rapidly discharging high voltage capacitors into a wire coil rigidly supported just inside the aircraft skin. Induced eddy currents in the skin create a repulsive force resulting in a hammer-like force which cracks, de-bonds, and expels ice on the skin surface. The promised advantages are very low energy, high reliability of de-icing, and low maintenance. Three years of Electo-Impulse De-icing (EIDI) research is summarized and the analytical studies and results of testing done in the laboratory, in the NASA Icing Research Tunnel, and in flight are presented. If properly designed, EIDI was demonstrated to be an effective and practical ice protection system for small aircraft, turbojet engine inlets, elements of transport aircraft, and shows promise for use on helicopter rotor blades. Included are practical techniques of fabrication of impulse coils and their mountings. The use of EIDI with nonmetallic surface materials is also described.

Zumwalt, G. W.↗

Multiple Laser Tracker Synchronization for the Vibration Analysis

Measuring the mechanical coupling and rigidity of a large apparatus presents unique challenges for 3D metrology. In this case the motion of well separated points attached to a rotor blade must be rapidly and repeatedly measured and the resulting data synchronized. This presentation describes the methodology and results for the mechanical coupling test of the magnetic field mapping system (FMS) for the Mu2e experiment at Fermi National Accelerator Laboratory (Fermilab). Three laser trackers, 2 API Radians and an API TIII, simultaneously measured the position of three cylindrical corner cube reflectors mounted on the FMS while the system was in motion and after coming to rest. The laser trackers took measurements at 83Hz for the T3 and 100Hz for the Radians, with fine spatial resolution, resulting in over 20,000 points measured per instrument in observation cycle. The laser tracker hardware and utilized software are unable to synchronize the three independent data streams directly during the measurement process. Instead a custom software program was developed to perform this synchronization of the data sequences during post-processing using features of the targets motion common to all three fiducial locations.

43 PARTICLE ACCELERATORS↗

Solvation Structure and Dynamics of Mg(TFSI) 2 Aqueous Electrolyte

Using ab initio molecular dynamics (AIMD) simulations, classical molecular dynamics (CMD) simulations, small-angle X-ray scattering (SAXS), and pulsed-field gradient nuclear magnetic resonance (PFG-NMR), the solvation structure and ion dynamics of magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 ) aqueous electrolyte at 1, 2, and 3 m concentrations are investigated. From AIMD and CMD simulations, the first solvation shell of an Mg 2+ ion is found to be composed of six water molecules in an octahedral configuration and the solvation shell is rather rigid. The TFSI - ions prefer to stay in the second solvation shell and beyond. Meanwhile, the comparable diffusion coefficients of positive and negative ions in Mg(TFSI) 2 aqueous electrolytes have been observed, which is mainly due to the formation of the stable [Mg(H 2 O) 6 ] 2+ complex, and, as a result, the increased effective Mg ion size. Finally, the calculated correlated transference numbers are lower than the uncorrelated ones even at the low concentration of 2 and 3 m, suggesting the enhanced correlations between ions in the multivalent electrolytes. This work provides a molecular-level understanding of how the solvation structure and multivalency of the ion affect the dynamics and transport properties of the multivalent electrolyte, providing insight for rational designs of electrolytes for improved ion transport properties.

36 MATERIALS SCIENCE↗

SU-D-207A-07: The Effects of Inter-Cycle Respiratory Motion Variation On Dose Accumulation in Single Fraction MR-Guided SBRT Treatment of Renal Cell Carcinoma

Purpose: To assess the dose deposition in simulated single-fraction MR-Linac treatments of renal cell carcinoma, when inter-cycle respiratory motion variation is taken into account using online MRI. Methods: Three motion characterization methods, with increasing complexity, were compared to evaluate the effect of inter-cycle motion variation and drifts on the accumulated dose for an SBRT kidney MR-Linac treatment: 1) STATIC, in which static anatomy was assumed, 2) AVG-RESP, in which 4D-MRI phase-volumes were time-weighted, based on the respiratory phase and 3) PCA, in which 3D volumes were generated using a PCA-model, enabling the detection of inter-cycle variations and drifts. An experimental ITV-based kidney treatment was simulated in a 1.5T magnetic field on three volunteer datasets. For each volunteer a retrospectively sorted 4D-MRI (ten respiratory phases) and fast 2D cine-MR images (temporal resolution = 476ms) were acquired to simulate MR-imaging during radiation. For each method, the high spatio-temporal resolution 3D volumes were non-rigidly registered to obtain deformation vector fields (DVFs). Using the DVFs, pseudo-CTs (generated from the 4D-MRI) were deformed and the dose was accumulated for the entire treatment. The accuracies of all methods were independently determined using an additional, orthogonal 2D-MRI slice. Results: Motion was most accurately estimated using the PCA method, which correctly estimated drifts and inter-cycle variations (RMSE=3.2, 2.2, 1.1mm on average for STATIC, AVG-RESP and PCA, compared to the 2DMRI slice). Dose-volume parameters on the ITV showed moderate changes (D99=35.2, 32.5, 33.8Gy for STATIC, AVG-RESP and PCA). AVG-RESP showed distinct hot/cold spots outside the ITV margin, which were more distributed for the PCA scenario, since inter-cycle variations were not modeled by the AVG-RESP method. Conclusion: Dose differences were observed when inter-cycle variations were taken into account. The increased inter-cycle randomness in motion as captured by the PCA model mitigates the local (erroneous) hotspots estimated by the AVG-RESP method.

60 APPLIED LIFE SCIENCES↗

Topology and ground state control in open-shell donor-acceptor conjugated polymers

Donor-acceptor (DA) conjugated polymers (CPs) with narrow bandgaps and open-shell (diradical) character represent an emerging class of materials whose rich behavior emanates from their collective electronic properties and diminished electron pairing. However, the structural and electronic heterogeneities that define these materials complicate bandgap control at low energies and connections linking topology, exchange interactions, and (opto)electronic functionality remain nascent. To address these challenges, we demonstrate structurally rigid and strongly π-conjugated copolymers comprised of a solubilizing thiadiazoloquinoxaline acceptor and cyclopenta[2,1-b:3,4-b']dithiophene or dithieno[3,2-b:2',3'-d]thiophene donors. Atom-specific substitution modulates local aromatic character within the donor resulting in dramatic differences in structural, physicochemical, electronic, and magnetic properties of the polymers. These long-range π-mediated interactions facilitate control between low-spin aromatic and high-spin quinoidal forms. This work provides a strategy to understand the evolution of the electronic structure within DA CPs, control the ground state spin multiplicity, tune spin-spin interactions, and articulate the emergence of their novel properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turbulence-level dependence of cosmic ray parallel diffusion

ABSTRACT Understanding the transport of energetic cosmic rays belongs to the most challenging topics in astrophysics. Diffusion due to scattering by electromagnetic fluctuations is a key process in cosmic ray transport. The transition from a ballistic to a diffusive-propagation regime is presented in direct numerical calculations of diffusion coefficients for homogeneous magnetic field lines subject to turbulent perturbations. Simulation results are compared with theoretical derivations of the parallel diffusion coefficient’s dependences on the energy and the fluctuation amplitudes in the limit of weak turbulence. The present study shows that the widely used extrapolation of the energy scaling for the parallel diffusion coefficient to high turbulence levels predicted by quasi-linear theory does not provide a universally accurate description in the resonant-scattering regime. It is highlighted here that the numerically calculated diffusion coefficients can be polluted for low energies due to missing resonant interaction possibilities of the particles with the turbulence. Five reduced-rigidity regimes are established, which are separated by analytical boundaries derived in this work. Consequently, a proper description of cosmic ray propagation can only be achieved by using a turbulence-level-dependent diffusion coefficient and can contribute to solving the Galactic cosmic ray gradient problem.

79 ASTRONOMY AND ASTROPHYSICS↗

Microstructure of amide-functionalized polyethylenes determined by NMR relaxometry

Amidation of polyethylenes creates a range of amide-containing materials with enhanced properties, but the effect of these functional groups on the microstructure of these new materials is not known. Here we employ solid-state nuclear magnetic resonance (NMR) techniques to analyze the microstructure of amide-modified polyethylenes. While a decrease in crystallinity was observed with increasing amounts of functionalization, we found by measuring the chain mobility of the crystalline, amorphous, and interphasial regions of the polyethylenes with NMR relaxation techniques that the grafted amidyl groups partition into the rigid amorphous fraction (RAF) between the crystalline and amorphous regions. The chemical specificity of these NMR experiments creates precise assessments of the location of functional groups within the materials. Together, these insights into the microstructure and morphology of amide-containing polyethylenes lay a foundation for a deeper understanding of the structure and properties of functional polyolefins.

Haber, Shira [Lawrence Berkeley National Laborator↗

The superconducting cavity stability ruby maser oscillator

Analysis of an application of the rudy maser to a superconducting Cavity Stabilized oscillator shows many attractive features. These derive from the mechancial stability inherent in an all-cryogenic design and from the properties of the ruby maser itself. A multiple-cavity design has been developed to allow physical separation of the high-Q superconducting cavity and the ruby element with its requried applied magnetic field. Mode selection is accomplished in this design by tuning the ruby by means of the applied field. We conclude that such an oscillator would perform well, even with cavity Q's as low as 10 to the 8th power allowing the use of a superconductor-on-sapphire resonator with its greater rigidity and lower thermal expansion. A first test of the Superconducting Cavity Stabilized Maser Oscillator (SCSMO) confirms the efficacy of the multiple-cavity design and the applicability of the ruby maser. Frequency variation less than 4x10 to the minus 11th power was measured in the stabilized mode and is attributed to the reference oscillator and to instabilities in the pump source. Variation of 10 to the minus 10th power was observed in the low-Q unstabilized mode, again attributable to pump fluctuations. Even so, direct scaling to a Q of 10 the 9th power predicts a stability better than 10 to the minus 15th power. Together with results showing the lowest losses to date in sapphire at microwave frequencies, and preliminary experiments on superconductor-on-sapphire resonators, frequency stability, levels as low as 10 to the minus 17th power are indicated.

Dick, G. J.↗

Stepwise deprotonation of truxene: structures, metal complexation, and charge-dependent optical properties

As a planar subunit of C 60 -fullerene, truxene (C 27 H 18 ) represents a highly symmetrical rigid hydrocarbon with strong blue emission. Herein, we used truxene as a model to investigate the chemical reactivity of a fullerene fragment with alkali metals. Monoanion, dianion, and trianion products with different alkali metal counterions were crystallized and fully characterized, revealing the core curvature dependence on charge and alkali metal coordination. Moreover, a proton nuclear magnetic resonance study coupled with computational analysis demonstrated that deprotonation of the aliphatic CH 2 segments introduces aromaticity in the five-membered rings. Importantly, the UV-vis absorption and photoluminescence of truxenyl anions with different charges reveal intriguing charge-dependent optical properties, implying variation of the electronic structure based on the deprotonation process. An increase in aromaticity and π-conjugation yielded a red shift in the absorption and photoluminescent spectra; in particular, large Stokes shifts were observed in the truxenyl monoanion and dianion with high emission quantum yield and time of decay. Overall, stepwise deprotonation of truxene provides the first crystallographically characterized examples of truxenyl anions with three different charges and charge-dependent optical properties, pointing to their potential applications in carbon-based functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Design of a Large Booster Ring for the Medium Energy Electron-Ion Collider at Jlab

In this paper, we present the current design of the large booster ring for the Medium energy Electron-Ion Collider at Jefferson Lab. The booster ring takes 3 GeV protons or ions of equivalent rigidity from a pre-booster ring, and accelerates them to 20 GeV for protons or equivalent energy for light to heavy ions before sending them to the ion collider ring. The present design calls for a figure-8 shape of the ring for superior preservation of ion polarization. The ring is made of warm magnets and shares a tunnel with the two collider rings. Acceleration is achieved by warm RF systems. The linear optics has been designed with the transition energy above the highest beam energy in the ring so crossing of transition energy will be avoided. Preliminary beam dynamics studies including chromaticity compensation are presented in this paper.

43 PARTICLE ACCELERATORS↗

Three series of quaternary rare-earth transition-metal pnictides with CaAl{sub 2}Si{sub 2}-type structures: RECuZnAs{sub 2}, REAgZnP{sub 2}, and REAgZnAs{sub 2}

Three series of quaternary rare-earth transition-metal pnictides REMM′Pn{sub 2} (M=Cu, Ag; M′=Zn; Pn=P, As) have been prepared by reaction of the elements at 800 °C, with crystal growth promoted through the addition of iodine. The extent of RE substitution is broad in these series: RECuZnAs{sub 2} (RE=Y, La-Nd, Sm, Gd–Lu), REAgZnP{sub 2} (RE=La–Nd, Sm, Gd–Dy), and REAgZnAs{sub 2} (RE=La-Nd, Sm, Gd-Dy). Powder and single-crystal X-ray diffraction analysis revealed that they adopt the trigonal CaAl{sub 2}Si{sub 2}-type structure (space group P3{sup ¯}m1, Z=1), in which Cu or Ag atoms are disordered with Zn atoms over the unique tetrahedrally coordinated transition-metal site. Magnetic measurements indicated Curie–Weiss behavior for several members of the RECuZnAs{sub 2} and REAgZnP{sub 2} series. Core-line X-ray photoelectron spectra (XPS) collected on some RECuZnAs{sub 2} members corroborate the charge assignment deduced by the Zintl concept for these compounds, (RE{sup 3+})(M{sup 1+})(Zn{sup 2+})(Pn{sup 3−}){sub 2}. Optical diffuse reflectance spectra and valence band XPS spectra established that these compounds are small band-gap semiconductors (up to ∼0.8 eV in REAgZnP{sub 2}) or semimetals (RECuZnAs{sub 2}). Band structure calculations also support this electronic structure and indicate that the band gap can be narrowed through appropriate chemical substitution (RE=smaller atoms, M=Cu, and Pn=As). - Graphical abstract: Cu or Ag atoms are disordered with Zn atoms over the tetrahedral site within relatively rigid [M{sub 2}Pn{sub 2}] slabs in three series of quaternary pnictides adopting the CaAl{sub 2}Si{sub 2}-type structure. - Highlights: • Three series (comprising 25 compounds) of pnictides REMM'Pn{sub 2} were prepared. • Cu or Ag atoms are disordered with Zn atoms within relatively rigid [M{sub 2}Pn{sub 2}] slabs. • They are semimetals or small band-gap semiconductors. • RECuZnAs{sub 2} and REAgZnP{sub 2} are generally paramagnetic.

36 MATERIALS SCIENCE↗

Taylor-Couette flow of unmagnetized plasma

Differentially rotating flows of unmagnetized, highly conducting plasmas have been created in the Plasma Couette Experiment. Previously, hot-cathodes have been used to control plasma rotation by a stirring technique [C. Collins et al., Phys. Rev. Lett. 108, 115001 (2012)] on the outer cylindrical boundary—these plasmas were nearly rigid rotors, modified only by the presence of a neutral particle drag. Experiments have now been extended to include stirring from an inner boundary, allowing for generalized circular Couette flow and opening a path for both hydrodynamic and magnetohydrodynamic experiments, as well as fundamental studies of plasma viscosity. Plasma is confined in a cylindrical, axisymmetric, multicusp magnetic field, with T{sub e} < 10 eV, T{sub i} < 1 eV, and n{sub e}<10{sup 11} cm{sup −3}. Azimuthal flows (up to 12 km/s, M = V∕c{sub s} ∼ 0.7) are driven by edge J × B torques in helium, neon, argon, and xenon plasmas, and the experiment has already achieved Rm ∼ 65 and Pm∼0.2−12. We present measurements of a self-consistent, rotation-induced, species-dependent radial electric field, which acts together with pressure gradient to provide the centripetal acceleration for the ions. The maximum flow speeds scale with the Alfvén critical ionization velocity, which occurs in partially ionized plasma. A hydrodynamic stability analysis in the context of the experimental geometry and achievable parameters is also explored.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Rigidity Spectrum of Cosmic-Ray Variations within Propagating InterplanetaryDisturbances: Neutron Monitor and SOHO/EPHIN Observations at∼1–10GV

The rigidity dependence of all Forbush decreases (FDs) recorded from 1995 to 2015 has been determined using neutron monitor (NM) and Solar and Heliospheric Observatory (SOHO) (EPHIN) spacecraft data, covering the energy (rigidity) range from ∼433 MeV (1GV) to 9.10 GeV (10 GV). We analyzed a total of 421 events and determined the spectrum in rigidity with an inverse power-law fit. As a result, the mean spectral index was identified to be 〈γF〉 = 0.46 ± 0.02. The majority (∼66%) of the FDs have γF within the range 0.3–0.7. The remaining one-third of the events (∼33%) have either (very) soft or hard FD spectra, with the latter being more common than the former. Significant variations of γF occur within almost every FD event. During the initial FD decay phase the spectrum becomes gradually harder, in contrast to the recovery phase, when it becomes softer. Additionally, low energies (rigidities) seem to be better suited for studying the fine structure of interplanetary disturbances (primarily interplanetary coronal mass ejections) that lead to FDs. In particular, FDs recorded by the EPHIN instrument on SOHO better capture a two-step structure than FDs observed by NMs. Finally, the ejecta of an ICME, especially when identified as a magnetic cloud, often leads to abrupt changes in the slope of γF.

Anatoly Belov↗

Stressor-layer-induced elastic strain sharing in SrTiO 3 complex oxide sheets

A precisely selected elastic strain can be introduced in submicron-thick single-crystal SrTiO 3 sheets using a silicon nitride stressor layer. A conformal stressor layer deposited using plasma-enhanced chemical vapor deposition produces an elastic strain in the sheet consistent with the magnitude of the nitride residual stress. Synchrotron x-ray nanodiffraction reveals that the strain introduced in the SrTiO 3 sheets is on the order of 10 -4 , matching the predictions of an elastic model. Using this approach to elastic strain sharing in complex oxides allows the strain to be selected within a wide and continuous range of values, an effect not achievable in heteroepitaxy on rigid substrates.

36 MATERIALS SCIENCE↗

The expected cosmic ray density and stream distributions at the heliolatitudinal asymmetry of solar wind

The results of the spatial distribution of cosmic ray density, gradients, and anisotropy obtained on the basis of the numerical solution of the anisotropic diffusion equation with an account of solar wind velocity change depending on the latitudinal angle theta of the form U=u sub oe sup alpha theta and the diffusion coefficient depending on the spatial coordinates and the particle rigidity are presented. It is shown that the increase of the solar wind velocity and the diffusion coefficient with heliolatitude leads to gradient distributions that are in accord with experimental data observed in space. The results of the energetic spectrum of 11 and 22-year cosmic ray variations obtained with an account of direction of the general magnetic field of the Sun are presented are given.

Alania, M. V.↗

Simulation of Attitude and Trajectory Dynamics and Control of Multiple Spacecraft

Agora software is a simulation of spacecraft attitude and orbit dynamics. It supports spacecraft models composed of multiple rigid bodies or flexible structural models. Agora simulates multiple spacecraft simultaneously, supporting rendezvous, proximity operations, and precision formation flying studies. The Agora environment includes ephemerides for all planets and major moons in the solar system, supporting design studies for deep space as well as geocentric missions. The environment also contains standard models for gravity, atmospheric density, and magnetic fields. Disturbance force and torque models include aerodynamic, gravity-gradient, solar radiation pressure, and third-body gravitation. In addition to the dynamic and environmental models, Agora supports geometrical visualization through an OpenGL interface. Prototype models are provided for common sensors, actuators, and control laws. A clean interface accommodates linking in actual flight code in place of the prototype control laws. The same simulation may be used for rapid feasibility studies, and then used for flight software validation as the design matures. Agora is open-source and portable across computing platforms, making it customizable and extensible. It is written to support the entire GNC (guidance, navigation, and control) design cycle, from rapid prototyping and design analysis, to high-fidelity flight code verification. As a top-down design, Agora is intended to accommodate a large range of missions, anywhere in the solar system. Both two-body and three-body flight regimes are supported, as well as seamless transition between them. Multiple spacecraft may be simultaneously simulated, enabling simulation of rendezvous scenarios, as well as formation flying. Built-in reference frames and orbit perturbation dynamics provide accurate modeling of precision formation control.

Stoneking, Eric T.↗