Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Observed drag coefficients in high winds in the near offshore of the South China Sea

This paper investigates the relationships between friction velocity, 10 m drag coefficient, and 10 m wind speed using data collected at two offshore observation towers (one over the sea and the other on an island) from seven typhoon episodes in the South China Sea from 2008 to 2014. The two towers were placed in areas with different water depths along a shore-normal line. The depth of water at the tower over the sea averages about 15 m, and the depth of water near the island is about 10 m. The observed maximum 10 min average wind speed at a height of 10 m is about 32 m s⁻¹. Momentum fluxes derived from three methods (eddy covariance, inertial dissipation, and flux profile) are compared. The momentum fluxes derived from the flux profile method are larger (smaller) over the sea (on the island) than those from the other two methods. The relationship between the 10 m drag coefficient and the 10 m wind speed is examined by use of the data obtained by the eddy covariance method. The drag coefficient first decreases with increasing 10 m wind speed when the wind speeds are 5–10 m s⁻¹, then increases and reaches a peak value of 0.002 around a wind speed of 18 m s⁻¹. The drag coefficient decreases with increasing 10 m wind speed when 10 m wind speeds are 18–27 m s⁻¹. A comparison of the measurements from the two towers shows that the 10 m drag coefficient from the tower in 10 m water depth is about 40% larger than that from the tower in 15 m water depth when the 10 m wind speed is less than 10 m s⁻¹. Above this, the difference in the 10 m drag coefficients of the two towers disappears.

54 ENVIRONMENTAL SCIENCES↗

Uncertainty analysis of terrestrial net primary productivity and net biome productivity in China during 1901-2005

Here, despite the importance of net primary productivity (NPP) and net biome productivity (NBP), estimates of NPP and NBP for China are highly uncertain. To investigate the main sources of uncertainty, we synthesized model estimates of NPP and NBP for China from published literature and the Multi-scale Synthesis and Terrestrial Model Intercomparison Project (MsTMIP). The literature-based results showed that total NPP and NBP in China were 3.35 ± 1.25 and 0.14 ± 0.094 Pg C yr –1 , respectively. Classification and regression tree analysis based on literature data showed that model type was the primary source of the uncertainty, explaining 36% and 64% of the variance in NPP and NBP, respectively. Spatiotemporal scales, land cover conditions, inclusion of the N cycle, and effects of N addition also contributed to the overall uncertainty. Results based on the MsTMIP data suggested that model structures were overwhelmingly important (>90%) for the overall uncertainty compared to simulations with different combinations of time-varying global change factors. The interannual pattern of NPP was similar among diverse studies and increased by 0.012 Pg C yr –1 during 1981–2000. In addition, high uncertainty in China's NPP occurred in areas with high productivity, whereas NBP showed the opposite pattern. Our results suggest that to significantly reduce uncertainty in estimated NPP and NBP, model structures should be substantially tested on the basis of empirical results. To this end, coordinated distributed experiments with multiple global change factors might be a practical approach that can validate specific structures of different models.

54 ENVIRONMENTAL SCIENCES↗

Testing a land model in ecosystem functional space via a comparison of observed and modeled ecosystem flux responses to precipitation regimes and associated stresses in a Central U.S. forest: Test Model in Ecosystem Functional Space

Testing complex land surface models has often proceeded by asking the question: does the model prediction agree with the observation? This approach has yet led to high-performance terrestrial models that meet the challenges of climate and ecological studies. Here we test the Community Land Model (CLM) by asking the question: does the model behave like an ecosystem? We pursue its answer by testing CLM in the ecosystem functional space (EFS) at the Missouri Ozark AmeriFlux (MOFLUX) forest site in the Central U.S., focusing on carbon and water flux responses to precipitation regimes and associated stresses. In the observed EFS, precipitation regimes and associated water and heat stresses controlled seasonal and interannual variations of net ecosystem exchange (NEE) of CO 2 and evapotranspiration in this deciduous forest ecosystem. Such controls were exerted more strongly by precipitation variability than by the total precipitation amount per se. A few simply constructed climate variability indices captured these controls, suggesting a high degree of potential predictability. While the interannual fluctuation in NEE was large, a net carbon sink was maintained even during an extreme drought year. Although CLM predicted seasonal and interanual variations in evapotranspiration reasonably well, its predictions of net carbon uptake were too small across the observed range of climate variability. Also, the model systematically underestimated the sensitivities of NEE and evapotranspiration to climate variability and overestimated the coupling strength between carbon and water fluxes. Its suspected that the modeled and observed trajectories of ecosystem fluxes did not overlap in the EFS and the model did not behave like the ecosystem it attempted to simulate. A definitive conclusion will require comprehensive parameter and structural sensitivity tests in a rigorous mathematical framework. We also suggest that future model improvements should focus on better representation and parameterization of process responses to environmental stresses and on more complete and robust representations of carbon-specific processes so that adequate responses to climate variability and a proper degree of coupling between carbon and water exchanges are captured.

58 GEOSCIENCES↗

High-spin Fe 2+ and Fe 3+ in single-crystal aluminous bridgmanite in the lower mantle

In this work, spin and valence states of iron in single-crystal bridgmanite (Mg 0.89 Fe 0.12 Al 0.11 Si 0.89 O 3 ) are investigated using X-ray emission and Mössbauer spectroscopies with laser annealing up to 115 GPa. The results show that Fe predominantly substitutes for Mg 2+ in the pseudo-dodecahedral A site, in which 80% of the iron is Fe 3+ that enters the lattice via the charge-coupled substitution with Al 3+ in the octahedral B site. The total spin momentum and hyperfine parameters indicate that these ions remain in the high-spin state with Fe 2+ having extremely high quadrupole splitting due to lattice distortion. (Al,Fe)-bearing bridgmanite is expected to contain mostly high-spin, A-site Fe 3+ , together with a smaller amount of A-site Fe 2+ , that remains stable throughout the region. Even though the spin transition of B-site Fe 3+ in bridgmanite was reported to cause changes in its elasticity at high pressures, (Fe,Al)-bearing bridgmanite with predominantly A-site Fe will not exhibit elastic anomalies associated with the spin transition.

58 GEOSCIENCES↗

Elasticity of single-crystal superhydrous phase B at simultaneous high pressure-temperature conditions

We investigated the combined effect of pressure and temperature on the elasticity of single-crystal superhydrous phase B (Shy-B) using Brillouin scattering and X-ray diffraction up to 12 GPa and 700 K. Next, using the obtained elasticity, we modeled the anisotropy of Shy-B along slab geotherms, showing that Shy-B has a low anisotropy and cannot be the major cause of the observed anisotropy in the region. Modeled velocities of Shy-B show that Shy-B will be shown as positive velocity anomalies at the bottom transition zone. Once Shy-B is transported to the topmost lower mantle, it will exhibit a seismic signature of lower velocities than topmost lower mantle. We speculate that an accumulation of hydrous phases, such as Shy-B, at the topmost lower mantle with a weight percentage of ~17–26% in the peridotite layer as subduction progresses could help explain the observed 2–3% low shear velocity anomalies in the region.

58 GEOSCIENCES↗

Confirming a pyrolitic lower mantle using self-consistent pressure scales and new constraints on CaSiO 3 perovskite

In this study, we have examined the lower mantle composition and mineralogy by modeling the density ( ρ ), bulk sound velocity ( V Φ ), and dln ρ /dln V Φ profiles of candidate lower mantle minerals using literature and new experimental equation of state (EoS) results. Additionally, for CaSiO 3 perovskite, complimentary synchrotron X-ray diffraction measurements in a laser-heated diamond anvil cell were conducted up to 156 GPa between 1200 K and 2600 K to provide more reliable constraints on the thermal EoS parameters. These new experimental results as well as literature P-V-T data sets are systematically analyzed using an internally self-consistent pressure scale. We have modeled ρ , V Φ , and dln ρ /dln V Φ profiles of the lower mantle with representative pyrolitic and chondritic compositional models in which the effect of Fe spin transition in ferropericlase is also taken into account. Our modeling results show that a pyrolitic lower mantle with an aggregate mineralogy of 75 vol % bridgmanite, 17 vol % ferropericlase, and 8 vol % CaSiO 3 perovskite produces ρ and V Φ profiles in better agreement with preliminary reference Earth model than a lower mantle with a chondritic composition. The modeled ρ , V Φ , and dln ρ /dln V Φ are mainly affected by the relative ratio of bridgmanite and ferropericlase but are not sensitive to the variation of the CaSiO 3 perovskite content. In addition, the spin crossover of Fe in ferropericlase can greatly raise the value of dln ρ /dln V Φ in the middle lower mantle, which is useful in detecting the presence of ferropericlase in the region. Based on these new mineral physical constraints and radial seismic structure, our study suggests the lower mantle is pyrolitic, which is chemically indistinguishable from the upper mantle.

58 GEOSCIENCES↗

Two-stage spin transition of iron in FeAl-bearing phase D at lower mantle

Hydrous magnesium silicate phase D plays a key role in the transport of water from the upper to the lower mantle via subducted slabs. Here we report pressure dependence hyperfine and lattice parameters of FeAl-bearing phase D up to megabar pressures using synchrotron nuclear forward scattering and X-ray diffraction in a diamond anvil cell at room temperature. We report FeAl-bearing phase D undergoes a two-stage high-spin to low-spin transition of iron for Fe 2+ at 37–41 GPa and for Fe 3+ at 64–68 GPa. These transitions are accompanied by an increase in density and a significant softening in the bulk modulus and bulk velocity at their respective pressure range. The occurrence of the dense low-spin FeAl-bearing phase D with relatively high velocity anisotropies in deep-subducted slabs can potentially contribute to small-scale seismic heterogeneities in the middle-lower mantle beneath the circum-Pacific area.

58 GEOSCIENCES↗

Response of Water Use Efficiency to Global Environmental Change Based on Output From Terrestrial Biosphere Models

Here, water use efficiency (WUE), defined as the ratio of gross primary productivity and evapotranspiration at the ecosystem scale, is a critical variable linking the carbon and water cycles. Incorporating a dependency on vapor pressure deficit, apparent underlying WUE (uWUE) provides a better indicator of how terrestrial ecosystems respond to environmental changes than other WUE formulations. Here we used 20th century simulations from four terrestrial biosphere models to develop a novel variance decomposition method. With this method, we attributed variations in apparent uWUE to both the trend and interannual variation of environmental drivers. The secular increase in atmospheric CO 2 explained a clear majority of total variation (66 ± 32%: mean ± one standard deviation), followed by positive trends in nitrogen deposition and climate, as well as a negative trend in land use change. In contrast, interannual variation was mostly driven by interannual climate variability. To analyze the mechanism of the CO 2 effect, we partitioned the apparent uWUE into the transpiration ratio (transpiration over evapotranspiration) and potential uWUE. The relative increase in potential uWUE parallels that of CO 2 , but this direct CO 2 effect was offset by 20 ± 4% by changes in ecosystem structure, that is, leaf area index for different vegetation types. However, the decrease in transpiration due to stomatal closure with rising CO 2 was reduced by 84% by an increase in leaf area index, resulting in small changes in the transpiration ratio. CO 2 concentration thus plays a dominant role in driving apparent uWUE variations over time, but its role differs for the two constituent components: potential uWUE and transpiration.

54 ENVIRONMENTAL SCIENCES↗

Quantifying the Effects of Historical Land Cover Conversion Uncertainty on Global Carbon and Climate Estimates

Previous studies have examined land use change as a driver of global change, but the translation of land use change into land cover conversion has been largely unconstrained. In this paper, we quantify the effects of land cover conversion uncertainty on the global carbon and climate system using the integrated Earth System Model. Our experiments use identical land use change data and vary land cover conversions to quantify associated uncertainty in carbon and climate estimates. Land cover conversion uncertainty is large, constitutes a 5 ppmv range in estimated atmospheric CO 2 in 2004, and generates carbon uncertainty that is equivalent to 80% of the net effects of CO 2 and climate and 124% of the effects of nitrogen deposition during 1850–2004. Additionally, land cover uncertainty generates differences in local surface temperature of over 1°C. Finally, we conclude that future studies addressing land use, carbon, and climate need to constrain and reduce land cover conversion uncertainties.

54 ENVIRONMENTAL SCIENCES↗

New High-Pressure Phase of CaCO 3 at the Topmost Lower Mantle: Implication for the Deep-Mantle Carbon Transportation

In this study, we have investigated the stability of CaCO 3 at high pressures and temperatures using synchrotron X-ray diffraction in laser-heated diamond anvil cells. Our experimental results have shown that CaCO 3 in the aragonite structure transforms into CaCO 3 -VII (P2 1 /c) at 27 GPa and 1,500 K with a negative Clapeyron slope of –4.3(9) MPa/K. CaCO 3 -VII is stable between 23 and 38 GPa at 2,300 K and transforms into post-aragonite at 42 GPa and 1,400 K. Furthermore, it reacts with stishovite, an abundant form of SiO 2 in subducted oceanic crust, forming CaSiO 3 -perovskite. The occurrence of CaSiO 3 -perovskite via the reaction of CaCO 3 -VII and stishovite provides an explanation for the observation of the high concentrations of CaSiO 3 -perovskite and some amount of CaCO 3 in deep-mantle inclusions. We conclude, CaCO 3 -VII is thus an important carbon-bearing phase at the topmost lower mantle and may provide necessary carbon to produce deep-mantle diamonds.

58 GEOSCIENCES↗

Concurrent Synthesis of High-Performance Monolayer Transition Metal Disulfides

To date, the chemical vapor deposition (CVD) approach has been widely used for the growth of transition metal dichalcogenides (TMDs). However, the reported CVD methods to synthesize TMDs cannot be used to grow more than one type of TMDs. This work reports a promising CVD technique to concurrently synthesize multiple monolayer transition metal disulfides once. The optoelectrical characterization and high-resolution transmission electron microscopy show the high quality of monolayer crystals, and, more importantly, there is no mixing between different precursors during the growth process, which has been investigated by considering the gas flow dynamics and concentration distribution of precursors in our setup. This strategy indicates the promising future for the batch production of 2D materials and the concurrent synthesis techniques in standard state-of-the-art complementary metal-oxide-semiconductor (CMOS) fabrication technology.

36 MATERIALS SCIENCE↗

Self-Templated Fabrication of CoO–MoO 2 Nanocages for Enhanced Oxygen Evolution

Oxygen evolution reaction (OER) plays a key role in energy conversion and storage processes such as water splitting and carbon dioxide reduction. However, the sluggish kinetics caused by insufficient active surface and limited charge transfer hinder OER's wide applications. In this work, a novel self-templating strategy for the fabrication of composite CoO–MoO 2 nanocages with enhanced OER performance is proposed. By designing a nanocage structure and incorporating conductive MoO 2 to promote both mass and charge transfer, high OER activity (η = 312 mV at 10 mA cm -2 ) as well as good stability in the resulting CoO–MoO 2 composite nanostructure can be achieved. This versatile synthetic strategy can also be extended to other metals (such as W) to provide greater opportunities for the controlled fabrication of mixed metal oxide nanostructures for electrochemical applications.

36 MATERIALS SCIENCE↗

Tuning Hole Transport Layer Using Urea for High-Performance Perovskite Solar Cells

Interface engineering is critical to the development of highly efficient perovskite solar cells. Here, urea treatment of hole transport layer (e.g., poly(3,4-ethylene dioxythiophene):polystyrene sulfonate (PEDOT:PSS)) is reported to effectively tune its morphology, conductivity, and work function for improving the efficiency and stability of inverted MAPbI 3 perovskite solar cells (PSCs). This treatment has significantly increased MAPbI 3 photovoltaic performance to 18.8% for the urea treated PEDOT:PSS PSCs from 14.4% for pristine PEDOT:PSS devices. The use of urea controls phase separation between PEDOT and PSS segments, leading to the formation of a unique fiber-shaped PEDOT:PSS film morphology with well-organized charge transport pathways for improved conductivity from 0.2 S cm -1 for pristine PEDOT:PSS to 12.75 S cm -1 for 5 wt% urea treated PEDOT:PSS. The urea-treatment also addresses a general challenge associated with the acidic nature of PEDOT:PSS, leading to a much improved ambient stability of PSCs. Additionally, the device hysteresis is significantly minimized by optimizing the urea content in the treatment.

14 SOLAR ENERGY↗

High-Voltage Charging-Induced Strain, Heterogeneity, and Micro-Cracks in Secondary Particles of a Nickel-Rich Layered Cathode Material

Nickel-rich layered materials LiNi 1-x-y Mn x Co y O 2 are promising candidates for high-energy-density lithium-ion battery cathodes. Unfortunately, they suffer from capacity fading upon cycling, especially with high-voltage charging. It is critical to have a mechanistic understanding of such fade. Synchrotron-based techniques (including scattering, spectroscopy, and microcopy) and finite element analysis are utilized to understand the LiNi 0.6 Mn 0.2 Co 0.2 O 2 material from structural, chemical, morphological, and mechanical points of view. The lattice structural changes are shown to be relatively reversible during cycling, even when 4.9 V charging is applied. However, local disorder and strain are induced by high-voltage charging. Nano-resolution 3D transmission X-ray microscopy data analyzed by machine learning methodology reveal that high-voltage charging induced significant oxidation state inhomogeneities in the cycled particles. Regions at the surface have a rock salt–type structure with lower oxidation state and build up the impedance, while regions with higher oxidization state are scattered in the bulk and are likely deactivated during cycling. In addition, the development of micro-cracks is highly dependent on the pristine state morphology and cycling conditions. Hollow particles seem to be more robust against stress-induced cracks than the solid ones, suggesting that morphology engineering can be effective in mitigating the crack problem in these materials.

25 ENERGY STORAGE↗

Tuning Fermi Levels in Intrinsic Antiferromagnetic Topological Insulators MnBi 2 Te 4 and MnBi 4 Te 7 by Defect Engineering and Chemical Doping

MnBi 2 Te 4 and MnBi 4 Te 7 are intrinsic antiferromagnetic topological insulators, offering a promising materials platform for realizing exotic topological quantum states. However, high densities of intrinsic defects in these materials not only cause bulk metallic conductivity, preventing the measurement of quantum transport in surface states, but may also affect magnetism and topological properties. In this paper, systematic density functional theory calculations reveal specific material chemistry and growth conditions that determine the defect formation and dopant incorporation in MnBi 2 Te 4 and MnBi 4 Te 7 . The large strain induced by the internal heterostructure promotes the formation of large-size-mismatched antisite defects and substitutional dopants. The results here show that the abundance of antisite defects is responsible for the observed n-type metallic conductivity. Additionally, a Te-rich growth condition is predicted to reduce the bulk free electron density, which is confirmed by experimental synthesis and transport measurements in MnBi 2 Te 4 . Furthermore, Na doping is proposed to be an effective acceptor dopant to pin the Fermi level within the bulk band gap to enable the observation of surface quantum transport. The defect engineering and doping strategies proposed here should stimulate further studies for improving synthesis and for manipulating magnetic and topological properties in MnBi 2 Te 4 , MnBi 4 Te 7 , and related magnetic topological insulators.

36 MATERIALS SCIENCE↗

Composition-Dependent Photoluminescence Properties and Anti-Counterfeiting Applications of A 2 AgX 3 (A = Rb, Cs; X = Cl, Br, I)

Copper(I) halides are emerging as attractive alternatives to lead halide perovskites for optical and electronic applications. However, blue-emitting all-inorganic copper(I) halides suffer from poor stability and lack of tunability of their photoluminescence (PL) properties. In this work, the preparation of silver(I) halides A 2 AgX 3 (A = Rb, Cs; X = Cl, Br, I) through solid-state synthesis is reported. In contrast to the Cu(I) analogs, A 2 AgX 3 are broad-band emitters sensitive to A and X site substitutions. First-principle calculations show that defect-bound excitons are responsible for the observed main PL peaks in Rb 2 AgX 3 and that self-trapped excitons (STEs) contribute to a minor PL peak in Rb 2 AgBr 3 . This is in sharp contrast to Rb 2 CuX 3 , in which the PL is dominated by the emission by STEs. Moreover, the replacement of Cu(I) with Ag(I) in A 2 AgX 3 significantly improves photostability and stability in the air under ambient conditions, which enables their consideration for practical applications. Thus, luminescent inks based on A 2 AgX 3 are prepared and successfully used in anti-counterfeiting applications. The excellent light emission properties, significantly improved stability, simple preparation method, and tunable light emission properties demonstrated by A 2 AgX 3 suggest that silver(I) halides may be attractive alternatives to toxic lead halide perovskites and unstable copper(I) halides for optical applications.

36 MATERIALS SCIENCE↗

Surface-Driven Evolution of the Anomalous Hall Effect in Magnetic Topological Insulator MnBi 2 Te 4 Thin Films

We report understanding the effects of the interfacial modification to the functional properties of magnetic topological insulator thin films is crucial for developing novel technological applications from spintronics to quantum computing. Here, a large electronic and magnetic response is reported to be induced in the intrinsic magnetic topological insulator MnBi 2 Te 4 by controlling the propagation of surface oxidation. It is shown that the formation of the surface oxide layer is confined to the top 1–2 unit cells but drives large changes in the overall magnetic response. Specifically, a dramatic reversal of the sign of the anomalous Hall effect is observed to be driven by finite thickness magnetism, which indicates that the film splits into distinct magnetic layers each with a unique electronic signature. These data reveal a delicate dependence of the overall magnetic and electronic response of MnBi 2 Te 4 on the stoichiometry of the top layers. This study suggests that perturbations resulting from surface oxidation may play a non-trivial role in the stabilization of the quantum anomalous Hall effect in this system and that understanding targeted modifications to the surface may open new routes for engineering novel topological and magnetic responses in this fascinating material.

36 MATERIALS SCIENCE↗

High‐Throughput Screening Assisted Discovery of a Stable Layered Anti‐Ferromagnetic Semiconductor: CdFeP 2 Se 6

Recent advances in 2D magnetism have heightened interest in layered magnetic materials due to their potential for spintronics. In particular, layered semiconducting antiferromagnets exhibit intriguing low-dimensional semiconducting behavior with both charge and spin as carrier controls. However, synthesis of these compounds is challenging and remains rare. Here, first-principles based high-throughput search is conducted to screen potentially stable mixed metal phosphorous trichalcogenides (MM ' P 2 X 6 , where M and M ' are transition metals and X is a chalcogenide) that have a wide range of tunable bandgaps and interesting magnetic properties. Among the potential candidates, a stable semiconducting layered magnetic material, CdFeP 2 Se 6 , that exhibits a short-range antiferromagnetic order at T N = 21 K with an indirect bandgap of 2.23 eV is successfully synthesized . This work suggests that high-throughput screening assisted synthesis can be an effective method for layered magnetic materials discovery.

2D materials↗