Carbon molecular sieve membranes for CO 2 /N 2 separations: Evaluating subambient temperature performance
Flue gas CO 2 capture has gained significant attention in recent years to mitigate the environmental impact of greenhouse gases. In spite of excellent performance by polymer membranes, there is still a need for more robust membranes to exceed the polymer upper bound at subambient temperatures, and carbon molecular sieve (CMS) membranes could offer a potential solution. In the present study, as a proof of concept, CMS hollow fiber membranes derived from defect-free 6FDA/BPDA-DAM polymer precursors at a pyrolysis temperature of 550°C were investigated for CO 2 /N 2 separation. Both ambient (35°C) and subambient (-20°C) temperature performance for these CMS membranes have been studied using a combination of pressure decay sorption and permeation techniques. Permeation findings using CO 2 /N 2 (20:80) mixed gas CMS showed CO 2 /N 2 selectivity of ~109 and CO 2 permeance of ~107 GPU at -20°C. Most interestingly, a decrease of only ~33% in CO 2 permeance with a large increase in CO 2 /N 2 selectivity (~4.5 times) was observed for CMS membranes on decreasing temperature from 35°C to -20°C. Gas sorption measurements indicated that the Langmuir hole filling capacity (C’ H ) for CO 2 is very high compared to N 2 at both ambient and subambient temperatures. This trend was attributed to higher sorbed density of CO 2 at saturation in the micropores due to its transition from gas phase to the liquid phase at subambient temperatures. Significant increases in sorption selectivity as well as diffusion selectivity for CO 2 /N 2 going from ambient to subambient temperatures make CMS membranes a possible substitute for polymer membranes for CO 2 /N 2 separation.