SEARCH · Search NASA
Results for “Method”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Methods and Issues for the Combined Use of Integral Experiments and Covariance Data: Results of a NEA International Collaborative Study
N/A
Method of fission product beta spectra measurements for predicting reactor anti-neutrino emission
Not Available
Localization of a radioactive source in an urban environment using Bayesian Metropolis methods [Bayesian Metropolis methods for source localization in an urban environment]
Here, we present a method for localizing an unknown source of radiation in an urban environment using a distributed detector network. This method employs statistical parameter estimation techniques, relying on an approximation for the response of a detector to the source based on a simplified model of the underlying transport phenomena, combined with a Metropolis-type sampler that is modified to propagate the effect of fixed epistemic uncertainties in the material macroscopic cross sections of objects in the scene. We apply this technique to data collected during a measurement campaign conducted in a realistic analog for an urban scene using a network of six mobile detectors. Our initial results are able to localize the source to within approximately 8 m over a scene of size 300 m 200 m in two independent trials with 30 min count times, including a characterization of the uncertainty associated with the poorly known macroscopic cross sections of objects in the scene. In these measurements, the nearest detectors were between 20 m to 30 m from the source, and recorded count rates between approximately 3 and 13 times background. A few detectors had line-of-sight to the source, while the majority were obscured by objects present in the scene. After extending our model to account for the orientation of the detectors and correcting for anomalies in the measurement data we were able to further improve the localization accuracy to approximately 2 m in both trials.
New method for analysis of X-ray computed tomography scans of TRISO fuel forms
X-ray computed tomography (XCT) is a powerful characterization tool that has been used for examination of both tristructural-isotropic (TRISO) coated particles and fuel forms. Rapid, nondestructive imaging of complete specimens by XCT provides significant characterization advantages in both speed and comprehensiveness over traditional materialographic methods. This paper discusses a method that has been developed to analyze XCT images of pebble fuel forms containing ~18,000 TRISO particles each. The XCT images are three-dimensional with contrast based on relative x-ray transparency. In the case of TRISO fuel forms, XCT image intensity distinguishes between the high-density kernel, the medium-density SiC, and the low-density matrix and carbon layers. Image analysis software has been developed to process XCT data sets to extract spatial distribution information, including particle nearest-neighbor distances, local packing fraction, and fuel-free zone thickness in TRISO fuel forms. Finally, although this type of high-resolution XCT analysis is likely not feasible as a quality control measurement for commercial TRISO fuel, it is highly useful in generating feedback for the development of fuel form fabrication processes.
High-dimensional methods for quantum homodyne tomography
We provide optimized recursion relations for homodyne tomography. We improve previous methods by mitigating the divergences intrinsic in the calculation of the pattern functions used previously, and detail how to implement the data analysis through Monte Carlo simulations. Our refinements are necessary for the reconstruction of excited quantum states which populate a high-dimensional subspace of the electromagnetic field Hilbert space. •Stabilization of numerics for quantum homodyne tomography reconstructions.•High dimensional quantum homodyne tomography reconstruction.•Monte Carlo simulations of quantum homodyne tomography.•Quantum Homodyne tomography simulations.
Method for measurement of diffusivity: Calorimetric studies of Fe/Ni multilayer thin films
A calorimetric method for the measurement of diffusivity in thin film multilayers is introduced and applied to the Fe Ni system. Using this method, the diffusivity in [Fe (25 nm)/Ni (25 nm)](20) multilayer thin films is measured as 4 x 10(-3)exp(-1.6 +/- 0.1 eV/ k(B)T) cm(2)/s, respectively. The diffusion mechanism in the multilayers and its relevance to laboratory synthesis of L1(0) ordered FeNi are discussed. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Measuring solar reflectance - Part II: Review of practical methods
A companion article explored how solar reflectance varies with surface orientation and solar position, and found that clear sky air mass 1 global horizontal (AM1GH) solar reflectance is a preferred quantity for estimating solar heat gain. In this study we show that AM1GH solar reflectance R{sub g,0} can be accurately measured with a pyranometer, a solar spectrophotometer, or an updated edition of the Solar Spectrum Reflectometer (version 6). Of primary concern are errors that result from variations in the spectral and angular distributions of incident sunlight. Neglecting shadow, background and instrument errors, the conventional pyranometer technique can measure R{sub g,0} to within 0.01 for surface slopes up to 5:12 [23 ], and to within 0.02 for surface slopes up to 12:12 [45 ]. An alternative pyranometer method minimizes shadow errors and can be used to measure R{sub g,0} of a surface as small as 1 m in diameter. The accuracy with which it can measure R{sub g,0} is otherwise comparable to that of the conventional pyranometer technique. A solar spectrophotometer can be used to determine R{sub g,0}{sup *}, a solar reflectance computed by averaging solar spectral reflectance weighted with AM1GH solar spectral irradiance. Neglecting instrument errors, R{sub g,0}{sup *} matches R{sub g,0} to within 0.006. The air mass 1.5 solar reflectance measured with version 5 of the Solar Spectrum Reflectometer can differ from R{sub g,0}{sup *} by as much as 0.08, but the AM1GH output of version 6 of this instrument matches R{sub g,0}{sup *} to within about 0.01. (author)
Method for Detection of Trace Metal and Metalloid Contaminants in Coal-Generated Fuel Gas Using Gas Chromatography/Ion Trap Mass Spectrometry
There exists an increasing need to develop a reliable method to detect trace contaminants in fuel gas derived from coal gasification. While Hg is subject to current and future regulations, As, Se, and P emissions may eventually be regulated. Sorbents are the most promising technology for the removal of contaminants from coal-derived fuel gas, and it will be important to develop a rapid analytical detection method to ensure complete removal and determine the ideal time for sorbent replacement/regeneration in order to reduce costs. This technical note explores the use of a commercial gas chromatography/ion trap mass spectrometry system for the detection of four gaseous trace contaminants in a simulated fuel gas. Quantitative, repeatable detection with limits at ppbv to ppmv levels were obtained for arsine (AsH 3 ), phosphine (PH 3 ), and hydrogen selenide (H 2 Se), while qualitative detection was observed for mercury. Decreased accuracy and response caused by the primary components of fuel gas were observed.
Spin-State Ordering in Metal-Based Compounds Using the Localized Active Space Self-Consistent Field Method
Quantitatively accurate calculations for spin-state ordering in transition-metal complexes typically demand a robust multiconfigurational treatment. The poor scaling of such methods with increasing size makes them impractical for large, strongly correlated systems. Density matrix embedding theory (DMET) is a fragmentation approach that can be used to specifically address this challenge. The single-determinantal bath framework of DMET is applicable in many situations, but it has been shown to perform poorly for molecules characterized by strong correlation when a multiconfigurational self-consistent field solver is used. To ameliorate this problem, the localized active space self-consistent field (LASSCF) method was recently described. Here in this work, LASSCF is applied to predict spin-state energetics in mono- and di-iron systems, and we show that the model offers an accuracy equivalent to that of CASSCF but at a substantially lower computational cost. Performance as a function of basis set and active space is also examined.
Electrochemical Methods for Assessing Kinetic Factors in the Reduction of CO 2 to Formate: Implications for Improving Electrocatalyst Design
hermochemical insights are often employed in the rationalization of reactivity and in the design of electrocatalysts for CO 2 reduction reactions targeting C–H bond-containing products. This work identifies experimental methods for assessing kinetic aspects of reactivity. These methods are illustrated using [Fe 4 N(CO) 12 ] - , which produces formate from CO 2 at -1.2 V versus SCE in either a MeCN/H 2 O solvent (95:5) or pH 6.5 buffered water. Elementary rates for each reaction step are identified along with the rate-determining step (RDS) as C–H bond formation. Transition state kinetics were determined from an Eyring analysis for the rate-determining C–H bond formation step using temperature-dependent electrochemical measurements. A lower measured Δ G ‡ (298 K, 12.3 ± 0.1 kcal mol –1 ) in a pH 6.5 aqueous solution, compared with a Δ G ‡ (298 K) of 15.0 ± 0.1 kcal mol –1 in a MeCN/H 2 O solvent (95:5), correlates with faster observed reaction rates and provides a kinetic rationalization for the solvent-dependent chemistry. Taken together, the experimentally determined kinetic insights highlight that enhancement of the local concentration of CO 2 at catalyst–hydride sites should be a primary focus of ongoing catalyst design. This will both enhance reaction rates and increase selectivity for C–H bond formation over competing H–H bond formation, because that step is fast in H 2 evolution reactions.
Method to Attenuate U(VI) Mobility in Acidic Waste Plumes Using Humic Acids
Explore the source record for details and available documents.
Exciton Absorption Spectra by Linear Response Methods: Application to Conjugated Polymers
The theoretical description of the time-evolution of excitons requires, as an initial step, the calculation of their spectra, which has been inaccessible to most users due to the high computational scaling of conventional algorithms and accuracy issues caused by common density functionals. Previously (J. Chem. Phys.2016, 144, 204105), we developed a simple method that resolves these issues. Our scheme is based on a two-step calculation in which a linear-response TDDFT calculation is used to generate orbitals perturbed by the excitonic state, and then a second linear-response TDDFT calculation is used to determine the spectrum of excitations relative to the excitonic state. Herein, we apply this theory to study near-infrared absorption spectra of excitons in oligomers of the ubiquitous conjugated polymers poly(3-hexylthiophene) (P3HT), poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV), and poly(benzodithiophene-thieno[3,4-b]thiophene) (PTB7). For P3HT and MEH-PPV oligomers, the calculated intense absorption bands converge at the longest wavelengths for 10 monomer units, and show strong consistency with experimental measurements. The calculations confirm that the exciton spectral features in MEH-PPV overlap with those of the bipolaron formation. In addition, our calculations identify the exciton absorption bands in transient absorption spectra measured by our group for oligomers (1, 2, and 3 units) of PTB7. For all of the cases studied, we report the dominant orbital excitations contributing to the optically active excited state–excited state transitions, and suggest a simple rule to identify absorption peaks at the longest wavelengths. We suggest our methodology could be considered for further developments in theoretical transient spectroscopy to include nonadiabatic effects, coherences, and to describe the formation of species such as charge-transfer states and polaron pairs.
Method of Distributions for Two‐Phase Flow in Heterogeneous Porous Media
Abstract Multiscale heterogeneity and insufficient characterization data for a specific subsurface formation of interest render predictions of multi‐phase fluid flow in geologic formations highly uncertain. Quantification of the uncertainty propagation from the geomodel to the fluid‐flow response is typically done within a probabilistic framework. This task is computationally demanding due to, for example, the slow convergence of Monte Carlo simulations (MCS), especially when computing the tails of a distribution that are necessary for risk assessment and decision‐making under uncertainty. The frozen streamlines method (FROST) accelerates probabilistic predictions of immiscible two‐phase fluid flow problems; however, FROST relies on MCS to compute the travel‐time distribution, which is then used to perform the transport (phase saturation) computations. To alleviate this computational bottleneck, we replace MCS with a deterministic equation for the cumulative distribution function (CDF) of travel time. The resulting CDF‐FROST approach yields the CDF of the saturation field without resorting to sampling‐based strategies. Our numerical experiments demonstrate the high accuracy of CDF‐FROST in computing the CDFs of both saturation and travel time. For the same accuracy, it is about 5 and 10 times faster than FROST and MCS, respectively.
Comparing sulfidation kinetics of silver nanoparticles in simulated media using direct and indirect measurement methods
Reported reaction kinetics of metal nanoparticles in natural and engineered systems commonly have used proxy measurements to infer chemical transformations, but extension of these methods to complex media has proven difficult.
A comparative study of secondary depolymerization methods on oxidized lignins
DDQ oxidized lignins were used as substrates to assess the effectiveness of secondary depolymerization methods for the production of aromatics.
A simple method for producing bio-based anode materials for lithium-ion batteries
Renewable biomaterials are catalytically converted to graphite for use in lithium-ion anodes using a simple and scalable process.