Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model Checking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Climate-Water Adaptation for Future US Electricity Infrastructure

Future climate-water conditions are anticipated to increase electricity demand, reduce transmission capacity, and limit power production. Yet, typical electricity capacity expansion planning does not consider climate-water constraints. We project four alternative U.S. power system configurations using an iterative modeling and data exchange platform that integrates climate-driven hydrological, thermal power plant, and capacity expansion models. Through a comparison with traditional modeling approaches, we show that this novel approach provides greater confidence in electricity capacity projections by incorporating feasibility checks that adjust infrastructure development to reach grid reliability thresholds under climate-water constraints. Initial projections without climate-water impacts on electricity generation show future power systems become less vulnerable, independent of climate-water adaptation, as economic drivers increase renewable and natural gas-based capacity, while water-intensive coal and nuclear plants retire. However, power systems may face reliability challenges without climate-water adaptation, revealing the significance of incorporating climate-water impacts into power system planning. Climate-adjusted (Iterative approach) projections require a 5.3-12.0% increase in national-level capacity, relative to Initial projections, leading to an additional $125-143 billion (5.0-7.0%) in infrastructure costs. Variable renewable and natural gas technologies account for nearly all the additional capacity and, together with regional trade-offs in electricity generation, enhance grid performance to reach reliability thresholds. These adaptation transitions also lower water use and emissions, contributing to climate change mitigation, and highlight the trade-offs and impacts of both near and long-term electricity generation planning decisions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Laser Disdrometer Quantities (LDQUANTS) and Video Disdrometer Quantities (VDISQUANTS) Value-Added Products Report

Disdrometers are useful instruments that measure the distribution of raindrop sizes (drop size distribution: DSD) and the associated rainfall rates/accumulation as those raindrops fall to the ground. These DSDs are a quantity of interest to members of the modeler and observational communities. However, use of disdrometer data for model evaluation, radar monitoring, or other activities requires careful quality control and processing for key DSD properties of interest (e.g., the number concentration of drops) to ensure appropriate physical (scattering, fall speed) assumptions. The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) Laser Disdrometer Quantities and Video Disdrometer Quantities Value-Added Product (LDQUANTS/VDISQUANTS VAP) uses standard methods from Tokay et al. (e.g., 2013, 2014) to filter drops with unrealistic fall speeds. Further, it estimates several microphysical/geophysical quantities of parameterized DSDs (gamma or exponential assumption type fitting methods) as in previous disdrometer studies and ARM long-term efforts (e.g., Testud et al. 2001, Giangrande et al. 2014, Thompson et al. 2015). Disdrometers are also beneficial for cross-checks with other instrumentation, including rain gauges and radars. To support research interests and related radar monitoring activities, this product calculates radar equivalent quantities, including dual polarization radar quantities (e.g., Z, Differential Reflectivity ZDR, etc.), using T-Matrix scattering and additional wavelength, temperature, and drop shape assumptions (e.g., Thurai et al. 2007). All of these efforts allow disdrometer data sets to become more useful and easily handled by modeling and observational studies, or routine instrumentation checks.

47 OTHER INSTRUMENTATION↗

Intelligent Process Visualization through Nuclear Operation Process Modeling, Reasoning, and Object Detection from Field Videos (Final Report)

This report is a deliverable for the “Final Report” task of DOE NEET Project 19-16790, "Context-Aware Safety Information Display for Nuclear Field Workers." This project's overall goal is to test the hypothesis that integrating computer vision and process reasoning methods will enable proactive visualization of the safe operation and maintenance processes of Nuclear Power Plants (NPP) for field workers. Augmented Reality (AR) glasses adopting such proactive safety information visualization techniques can significantly increase personnel safety and reduce the NPP’s operating costs. The current practice of monitoring NPPs requires workers to switch between digital models, data, and physical workspaces in identifying relevant but potentially occluded objects and in assessing the risks of operation and maintenance processes. On the other hand, frequently changed field conditions require field workers to report to supervisors for real-time guidance. Such guidance is essential to ensure that changing conditions will not invalidate or endanger the work order and other ongoing processes that may jeopardize NPP operations. Additionally, incorrect recognition of equipment objects can result in communication errors and safety problems. AR techniques can assist engineers in viewing the physical workspaces with objects labeled with detailed operation procedures and safety reminders during field operations. The project team developed an “Intelligent Context-Aware Safety Information Display” (ICAD) for supporting Nuclear Power Plant (NPP) field workers in achieving safe and efficient execution of a series of operational tasks in uncertain and changing workspaces of an NPP. Before designing the ICAD-AR prototype, the project team synthesized NPP operational knowledge models through literature review studies, surveys, interviews with domain experts, and knowledge modeling. The project team conducted an extensive study of the operational procedures of various NPPs, and digital technologies that can support the safe and efficient execution of those procedures in different NPP operational contexts. This literature review helped the project team conduct surveys and interviews with nuclear engineers and field workers to identify three categories of information. The NPP knowledge modeling efforts reveal that the three categories of information identified have different levels of importance in a typical procedure of carrying out a series of tasks to achieve a specific NPP operation goal (e.g., shutdown, mode changes). These three categories of information include 1) Workspace dynamics – the changing spatial arrangements of workspaces, tools, protection equipment, and supporting materials, 2) Workflow prognostics – the dynamic dependencies between different parts of an NPP that functionally support and influence each other in terms of safety and efficiency, and 3) Hazards – objects and spaces that contain hazardous materials or physical conditions that can pose risks to workers or mechanical systems. The project team has profiled the importance levels of these categories of information into a knowledge model. This knowledge model specifies what types of information are more critical for a given task in a given workspace so that computers can automatically identify critical objects and sensors in a scene for delivering context-ware safety information to field workers through AR devices. Significant research development of this project results in technical research outcomes and a prototyping system that illustrates the technical feasibility of establishing an ICAD-AR system supporting the proactive safety information display for nuclear field workers. This final report summarizes the project team’s technological achievements in the past three years. Overall, the project team completed the development and integration of five techniques into a prototype ICAD Augmented Reality (ICAD-AR) system and demonstrated the developed system’s real-time execution in a mechanical room. The project team completed the analysis of using this prototype in other types of workspaces based on 3D image data and digital design models collected from two additional workspaces (a water treatment plant and a flow loop training facility). The integrated techniques include 1) Natural Language Processing (NLP) algorithms supporting the generation and updates of nuclear fieldwork process models based on text analysis of work packages and operation manuals; 2) sensor log analysis for predicting control actions in given sensor reading contexts; 3) computer vision algorithms for automatic localization and navigation of workers; 4) object detection algorithms for identifying task-related objects and correlated sensors for safety checking; 5) AR technique as a platform for supporting the integration. The testing results of these five techniques have shown that 1) the sensor log analysis model can predict the next control action with an accuracy of 0.883; 2) the trained natural language processing model can extract more than 80% of the critical information from paper-based procedures (PBPs); 3) the navigation algorithm with the integration of Visual Inertial Odometry (VIO) and Non-Recursive Bayesian Filter methods make operator’s trajectory estimation resilient to drift error; 4) the computer vision algorithm can detect task-specific and safety-critical objects with an average accuracy of 95.3%. The project team used work procedures collected from a flow loop training facility and two datasets collected from two mechanical rooms simulating the workspaces of NPPs to demonstrate the technical capabilities of the developed ICAD-AR prototype. The demonstration validated the technical feasibility of establishing the ICAD-AR system for nuclear field workers and identified the challenges in 1) automatic text analysis of work packages; 2) use of limited samples of sensor logs for predicting the proper timings of control actions; 3) reliably tracking workers and their task progress in mechanical rooms with many similar objects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An Analysis of Multi-type Relational Interactions in FMA Using Graph Motifs with Disjointness Constraints

The interaction of multiple types of relationships among anatomical classes in the Foundational Model of Anatomy (FMA) can provide inferred information valuable for quality assurance. This paper introduces a method called Motif Checking (MOCH) to study the effects of such multi-relation type interactions. MOCH represents patterns of multitype interaction as small labeled sub-graph motifs, whose nodes represent class variables, and labeled edges represent relational types. By representing FMA as an RDF graph and motifs as SPARQL queries, fragments of FMA are automatically obtained as auditing candidates. Leveraging the scalability and reconfigurability of Semantic Web Technology (OWL, RDF and SPARQL) and Virtuoso, we performed exhaustive analyses of three 2-node motifs, resulting in 638 matching FMA configurations; twelve 3-node motifs, resulting in 202,960 configurations. Using the Principal Ideal Explorer (PIE) methodology as an extension of MOCH, we were able to identify 755 root nodes with 4,100 respective descendants with opposing antonyms in their class names for arbitrary-length motifs. With possible disjointness implied by antonyms, we performed manual inspection of a subset of the resulting FMA fragments and tracked down a source of abnormal inferred conclusions (captured by the motifs), coming from a gender-neutral class being modeled as a part of gender-specific class, such as “Urinary system” is a part of “Female human body.” Our results demonstrate that MOCH and PIE provide a unique source of valuable information for quality assurance. Since our approach is general, it is applicable to any ontological system with an OWL representation.

Zhang, Guo Qiang↗

The MicroBooNE Single-Photon Low-Energy Excess Search (Public Note 1087)

MicroBooNE is a short baseline neutrino experiment at Fermilab designed to address the low energy excess observed by the MiniBooNE experiment. This note describes and presents preliminary results for the MicroBooNE analysis developed to address this excess as a single photon plus one or zero protons in the final state. The analysis assumes neutrino neutral current Δ resonance production followed by Δ radiative decay on argon (NC Δ → Nγ ) as the "signal model"; event reconstruction and selection have been developed and optimized in order to maximize efficiency and reduce cosmogenic and other beam-related backgrounds to the NC Δ → Nγ signal. We present the analysis methodology and validation checks performed on limited-statistics open data sets, corresponding to 5 x10 19 protons on target (POT), following a blind analysis, as well as the projected sensitivities for testing the Standard Model (SM) predicted rate for the NC Δ → Nγ process and for testing the interpretation of the previously observed MiniBooNE low energy excess as NC Δ → Nγ events, using the full anticipated MicroBooNE data set of 12.25 x 10 20 POT.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SCALE Procedure for Verified, Archived, Library of Inputs and Data (VALID)

This procedure provides a framework for preparing, reviewing, and storing model inputs and derived data so that individuals with authorized access to the Verified, Archived, Library of Inputs and Data (VALID) repository can use the inputs and data with confidence in their analyses. This procedure uses documented checks and reviews to ensure that the inputs and data were correctly generated using appropriate references. Configuration management is implemented to prevent inadvertent modification of the inputs and data or inclusion of models that have not been reviewed. This procedure also provides guidance to be followed if errors are identified or if input or data revisions are needed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Involute Working Group – FSI Analysis of Fuel Plates Using Finite Volume and Finite Element Methods

The three involute plate research reactors RHF, HFIR, and FRM II have expressed an interest in using computational software to carry their steady-state safety analysis. Since these tools represent a significant departure from the methods used currently (one-dimensional), the acceptability of the new approach by regulators requires thorough verification and validation of these tools. Therefore, Argonne National Laboratory and the three involute-plate reactors formed an informal group called the Involute Working Group aiming at qualifying computational tools to perform steady-state safety analysis. The present report focuses on a comparison of finite volume and finite element methods to model solids in fluid-structure interaction problems with the goal to estimate the coolant flow-induced fuel plate deflections obtained with the two methods. The finite volume method will be obsoleted in STARCCM+ by the end of 2021, nevertheless, this evaluation is important because the method was used by ANL researchers to model the response of the fuel plates, despite its drawbacks, which are discussed in the report. It was essential to check how those estimates compare to the results obtained with the finite element method that is considered superior for structural analysis. Various geometries, i.e., flat, cylindrical and circle-involute fuel plates, as well as coolant flow speed, were considered. The comparison shows that, independently of the plate geometry, the finite volume method significantly underestimates the deflection as compared to finite element method for coarser meshes. When the discretization is developed as a result of a mesh sensitivity study using finite element method, the result obtained using finite volume method can be a few times smaller than the corresponding finite element method solution. A code-to-code comparison , between STAR-CCM+ and LS-DYNA was included in the analysis. Within the LS-DYNA models, two types of finite element formulations were used: solid and shell finite elements. Mesh sensitivity study showed that both approaches converge to a similar value that was obtained with STAR-CCM+ finite element solver. The evaluation of the computational solvers was extended by adding two benchmark cases from the STAR-CCM+ Verification Suite and presented in the Appendix A. The selected cases are: (1) bending of a cantilever beam under external load, and (2) cylindrical shell deformation analysis, known in the literature as ‘Scordelis-Lo roof’. The problems were solved with finite volume, and finite element methods, and the results confirmed the previously discussed findings. The analysis shows that the finite element solver is superior to the finite volume solver in terms of representation of model geometry and estimating the structural behavior of fuel plates. Depending on the ratio of the load to the flexibility of the plate, the finite volume solver can greatly under- or overestimate the structural response if a very carefully selected mesh is not used.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Constraints on dark energy parameters from correlations of CMB with LSS

In this paper, we combine the the latest observational data, including the WMAP five-year data (WMAP5), the baryon acoustic oscillations (BAO) and type Ia supernovae (SN) ''union'' compilation, and use the Markov Chain Monte Carlo method to determine the dark energy parameters. We pay particular attention to the Integrated Sache-Wolfe (ISW) data from the cross-correlations of cosmic microwave background (CMB) and large scale structure (LSS). In the ΛCDM model, we find that the ISW data, as a complement to the WMAP data, could significantly improve the constraint of curvature Ω{sub k}. We also check the improvement of constraints from the new prior on the Hubble constant and find this new prior could improve the constraint of Ω{sub k} by a factor of 2. Finally, we study the dynamical evolving EoS of dark energy from the current observational data. Based on the dynamical dark energy model, parameterizing as w(a) = w{sub 0}+w{sub a}(1−a), we find that the ΛCDM model remains a good fit to the current data. When taking into account the ISW data, the error bars of w{sub 0} and w{sub a} could be shrunk slightly. Current constraints on the dynamical dark energy model are not conclusive. The future precision measurements are needed.

79 ASTRONOMY AND ASTROPHYSICS↗

The MicroBooNE Single-Photon Low-Energy Excess Search

MicroBooNE is a short baseline neutrino experiment at Fermilab designed to address the low energy excess observed by the MiniBooNE experiment. This note describes and presents preliminary results for the MicroBooNE analysis developed to address this excess as a single photon plus one or zero protons in the final state. The analysis assumes neutrino neutral current Δ resonance production followed by Δ radiative decay on argon (NC Δ → $N_γ$) as the “signal model”; event reconstruction and selection have been developed and optimized in order to maximize efficiency and reduce cosmogenic and other beam-related backgrounds to the NC Δ → $N_γ$ signal. We present the analysis methodology and validation checks performed on limited-statistics open data sets, corresponding to 5×10 19 protons on target (POT), following a blind analysis, as well as the projected sensitivities for testing the Standard Model (SM) predicted rate for the NC Δ → $N_γ$ process and for testing the interpretation of the previously observed MiniBooNE low energy excess as NC Δ → $N_γ$ events, using the full anticipated MicroBooNE data set of 12.25×10 20 POT.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The JCSG MR Pipeline: Optimized Alignments, Multiple Models And Parallel Searches

The success rate of molecular replacement (MR) falls considerably when search models share less than 35% sequence identity with their templates, but can be improved significantly by using fold-recognition methods combined with exhaustive MR searches. Models based on alignments calculated with fold-recognition algorithms are more accurate than models based on conventional alignment methods such as FASTA or BLAST, which are still widely used for MR. In addition, by designing MR pipelines that integrate phasing and automated refinement and allow parallel processing of such calculations, one can effectively increase the success rate of MR. Here, updated results from the JCSG MR pipeline are presented, which to date has solved 33 MR structures with less than 35% sequence identity to the closest homologue of known structure. By using difficult MR problems as examples, it is demonstrated that successful MR phasing is possible even in cases where the similarity between the model and the template can only be detected with fold-recognition algorithms. In the first step, several search models are built based on all homologues found in the PDB by fold-recognition algorithms. The models resulting from this process are used in parallel MR searches with different combinations of input parameters of the MR phasing algorithm. The putative solutions are subjected to rigid-body and restrained crystallographic refinement and ranked based on the final values of free R factor, figure of merit and deviations from ideal geometry. Finally, crystal packing and electron-density maps are checked to identify the correct solution. If this procedure does not yield a solution with interpretable electron-density maps, then even more alternative models are prepared. The structurally variable regions of a protein family are identified based on alignments of sequences and known structures from that family and appropriate trimmings of the models are proposed. All combinations of these trimmings are applied to the search models and the resulting set of models is used in the MR pipeline. It is estimated that with the improvements in model building and exhaustive parallel searches with existing phasing algorithms, MR can be successful for more than 50% of recognizable homologues of known structures below the threshold of 35% sequence identity. This implies that about one-third of the proteins in a typical bacterial proteome are potential MR targets.

59 BASIC BIOLOGICAL SCIENCES↗

Modeling and MANOVA studies on toxicity and endocrine potential of packaging materials exposed to different extraction schemes

Highlights: • Simultaneous assessment of the impact of treatment conditions on packages ecotoxicity. • Checking of the impact of temperature and extracting solvents on endocrine potential of packages. • Comparison of the package lining spectra before and after extraction. • Ecotoxicity parameters as a tool in packages lining stability assessment. The stability of the linings of packaging that is in contact with the goods stored has been of major concern during decades of the development of packaging materials. In this work, an attempt was undertaken to assess the applicability of using two bioassays (Microtox® and XenoScreen YES/YAS) in estimating the stability of packaging (cans, caps, multilayer material) and the impact of their degradation on the toxicity of some simulated media. The assessment of the impact of packaging storage conditions (temperature, disinfection, preservation, extracting and washing solvents) was planned and performed with i) regression modeling of the experimental effects on the ecotoxicity readings, ii) ANOVA and MANOVA estimation of the experimental conditions as significant factors affecting the toxicity results and iii) FTIR analysis of the packages. It is shown that the effects of temperature and extraction solvents could be quantitatively assessed by the agreement between all methods applied. It can be stated that temperature and acidity as well as the alcohol content in the sensitive media have the greatest impact on the toxicity of the extract and thus on the stability of the internal lining and the extractability of xenobiotics.

54 ENVIRONMENTAL SCIENCES↗

Progress Toward Simulating Departure from Nucleate Boiling at High-Pressure Applications with Selected Wall Boiling Closures

Recently, a Eulerian-based two-fluid computational fluid dynamics (CFD) framework with a wall heat flux partitioning approach has been intensively investigated for departure from nucleate boiling (DNB) simulation under the U.S. Department of Energy–funded Consortium for Advanced Simulation of Light Water Reactors (CASL) program. Understanding of the DNB characteristics over a range of pressurized water reactor–like operating conditions and accurate prediction of boiling crisis in the nuclear power system have been grand challenges because of the large impact of DNB on reactor safety and operational economics. The ultimate goal of this task in the CASL program is to introduce a robust multiphase CFD–based DNB modeling framework that is capable of characterizing an entire boiling history in which the wall boiling mode experiences the following through multiple stages of heat transfer mode: (1) single-phase convective heat transfer, (2) nucleate boiling heat transfer, and (3) identification of the departure of nucleate boiling. To validate the CASL boiling model, we have benchmarked simulated DNB over three different flow channel configurations (pipe flow, 5 × 5 fuel bundle with mixing vane tests, and 5 × 5 fuel bundle without mixing vane tests) against experimental measurements, and the validation result with open literature is reported. The DNB detection criteria in the simulation are checked by monitoring the peak wall temperature, wall dryout factor, and net energy balance. In addition to the DNB performance test, some preliminary sensitivity results on closure model selection are reported to address the prediction capability of local void profile against measurements. The boiling simulation tested in this study exhibits a maximum deviation of 24% from the measured DNB value in a high-pressure (i.e., 138 bars) subcooled pipe flow test. The ranges of operating conditions are as follows: 1650 to 2650 kg/m 2 ·s for mass flux and 8.5 to 96 K for subcooled inlet temperature. The deviation is even reduced to 7% when the subcooled temperature is less than 40 K. Besides accuracy, base practice guidelines for DNB detection criteria are tested by monitoring three simulation variables: (1) maximum wall temperature, (2) wall dryout factor (i.e., K-value), and (3) energy balance. Numerical robustness of DNB simulation is largely achieved in most of the validation test except for a few high subcooled test cases.

42 ENGINEERING↗

Regge phenomenology of pion photoproduction off the nucleon at forward angles

We present a Regge model for pion photoproduction which is basically free of parameters within the framework of the s-channel helicity amplitude. For completeness we take into account axial mesons a{sub 1}(1260), b{sub 1}(1235) and tensor meson a{sub 2}(1320) in addition to the primary {pi}+{rho} exchanges for charged pion photoproduction, while the axial meson h{sub 1}(1170) exchange is added to the model of {omega}+{rho}{sup 0}+b{sub 1} exchanges for the neutral case. The present model deals for the first time with the a{sub 2} and h{sub 1} Regge poles in the s-channel helicity amplitude. For model independence, we use coupling constants of all exchanged mesons determined from empirical decay widths or from the SU(3) relations together with consistency check with existing estimates that are widely accepted in other reaction processes. Based on these coupling constants the simultaneous description of four photoproduction channels is given. Within the Regge regime, s>>4M{sup 2} and -t<2 GeV{sup 2}, cross sections and spin polarization asymmetries at various photon energies are analyzed and results are obtained in better agreement with experimental data without referring to any fitting procedure. The model confirms dominance of the nucleon Born term in the sharp rise of the charged pion cross section at very forward angles, while dominance of the {omega} exchange with the nonsense wrong signature zero leads to the deep dip in the neutral pion cross section. In contrast to existing models, however, our model for the charged pion case shows quite a different production mechanism due to the crucial role of the tensor meson a{sub 2} exchange in the cross section and spin polarization asymmetries. Also the axial meson b{sub 1} exchange is found to give a sizable contribution to the photon polarization asymmetry. In the neutral case, the role of the b{sub 1} is not significant, but the isoscalar h{sub 1} exchange gives an important contribution to the dip-generating mechanism in the photon polarization, showing the isoscalar nature of the process with the {omega}. These findings demonstrate validity of the present model with the prompt use of the tensor meson a{sub 2} and axial meson h{sub 1} for a wider application.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The abelian confinement mechanism revisited: New aspects of the Georgi–Glashow model

The confinement problem remains one of the most difficult problems in theoretical physics. An important step toward the solution of this problem is Polyakov’s work on abelian confinement. The Georgi–Glashow model is a natural testing ground for this mechanism which has been surprising us by its richness and wide applicability. In this work, we shed light on two new aspects of this model in 2+1 D. First, we develop a many-body description of the effective degrees of freedom. Namely, we consider a non-relativistic gas of W-bosons in the background of monopole–instanton plasma. Many-body treatment is a standard toolkit in condensed matter physics. However, we add a new twist by supplying the monopole–instantons as external background field. Using this construction along with a mean-field approximation, we calculate the form of the potential between two electric probes as a function of their separation. This potential is expressed in terms of the Meijer-G function which interpolates between logarithmic and linear behavior at small and large distances, respectively. Second, we develop a systematic approach to integrate out the effect of the W-bosons at finite temperature in the range 0≤T<M{sub W}, where M{sub W} is the W-boson mass, starting from the full relativistic partition function of the Georgi–Glashow model. Using a heat kernel expansion that takes into account the non-trivial thermal holonomy, we show that the partition function describes a three-dimensional two-component Coulomb gas. We repeat our analysis using the many-body description which yields the same result and provides a check on our formalism. At temperatures close to the deconfinement temperature, the gas becomes essentially two-dimensional recovering the partition function of the dual sine-Gordon model that was considered in a previous work. -- Highlights: • We consider the problem of abelian confinement in the Georgi–Glashow model from a new perspective. • We develop a many-body description of the degrees of freedom of this model in the background of monopole–instanton plasma. • We use the many-body formalism to find an analytic expression of the potential between two probes at zero temperature. • We also use a systematic approach to integrate out the W-bosons starting from the full relativistic partition function. • This results in a three-dimensional two-component Coulomb gas with long range and Aharonov–Bohm phase interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical challenges for energy conservation in N -body simulations of collapsing self-interacting dark matter halos

Dark matter (DM) halos can be subject to gravothermal collapse if the DM is not collisionless, but engaged in strong self-interactions instead. When the scattering is able to efficiently transfer heat from the centre to the outskirts, the central region of the halo collapses and reaches densities much higher than those for collisionless DM. This phenomenon is potentially observable in studies of strong lensing. Current theoretical efforts are motivated by observations of surprisingly dense substructures. However, a comparison with observations requires accurate predictions. One method to obtain such predictions is to use N-body simulations. Collapsed halos are extreme systems that pose severe challenges when applying state-of-the-art codes to model self-interacting dark matter (SIDM). In this work, we investigate the root of such problems, with a focus on energy non-conservation. Moreover, we discuss possible strategies to avoid them. We ran N-body simulations, both with and without SIDM, of an isolated DM-only halo and we adjusted the numerical parameters to check the accuracy of the simulation. We find that not only the numerical scheme for SIDM can lead to energy non-conservation, but also the modelling of gravitational interaction and the time integration are problematic. The main issues we find are: (a) particles changing their time step in a non-time-reversible manner; (b) the asymmetry in the tree-based gravitational force evaluation; and (c) SIDM velocity kicks breaking the time symmetry. Tuning the parameters of the simulation to achieve a high level of accuracy allows us to conserve energy not only at early stages of the evolution, but also later on. However, the cost of the simulations becomes prohibitively large as a result. Some of the problems that make the simulations of the gravothermal collapse phase inaccurate can be overcome by choosing appropriate numerical schemes. However, other issues still pose a challenge. Our findings motivate further works on addressing the challenges in simulating strong DM self-interactions.

dark matter↗

The Atacama Cosmology Telescope: delensed power spectra and parameters

We present ΛCDM cosmological parameter constraints obtained from delensed microwave background power spectra. Lensing maps from a subset of DR4 data from the Atacama Cosmology Telescope (ACT) are used to undo the lensing effect in ACT spectra observed at 150 and 98 GHz. At 150 GHz, we remove the lensing distortion with an effective efficiency of 30% (TT), 30% (EE), 26% (TE) and 20% (BB); this results in detections of the delensing effect at 8.7σ (TT), 5.1σ (EE), 2.6σ (TE), and 2.4σ (BB) significance. The combination of 150 and 98 GHz TT, EE, and TE delensed spectra is well fit by a standard ΛCDM model. We also measure the shift in best-fit parameters when fitting delensed versus lensed spectra; while this shift does not inform our ability to measure cosmological parameters, it does provide a three-way consistency check among the lensing inferred from the best-fit parameters, the lensing in the CMB power spectrum, and the reconstructed lensing map. This shift is predicted to be zero when fitting with the correct model since both lensed and delensed spectra originate from the same region of sky. Furthermore, fitting with a ΛCDM model and marginalizing over foregrounds, we find that the shift in cosmological parameters is consistent with zero. Our results show that gravitational lensing of the microwave background is internally consistent within the framework of the standard cosmological model.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamical model for the toroidal sporadic meteors

More than a decade of radar operations by the Canadian Meteor Orbit Radar have allowed both young and moderately old streams to be distinguished from the dispersed sporadic background component. The latter has been categorized according to broad radiant regions visible to Earth-based observers into three broad classes: the helion and anti-helion source, the north and south apex sources, and the north and south toroidal sources (and a related arc structure). The first two are populated mainly by dust released from Jupiter-family comets and new comets. Proper modeling of the toroidal sources has not to date been accomplished. Here, we develop a steady-state model for the toroidal source of the sporadic meteoroid complex, compare our model with the available radar measurements, and investigate a contribution of dust particles from our model to the whole population of sporadic meteoroids. We find that the long-term stable part of the toroidal particles is mainly fed by dust released by Halley type (long period) comets (HTCs). Our synthetic model reproduces most of the observed features of the toroidal particles, including the most troublesome low-eccentricity component, which is due to a combination of two effects: particles' ability to decouple from Jupiter and circularize by the Poynting-Robertson effect, and large collision probability for orbits similar to that of the Earth. Our calibrated model also allows us to estimate the total mass of the HTC-released dust in space and check the flux necessary to maintain the cloud in a steady state.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiple soft limits of cosmological correlation functions

We derive novel identities satisfied by inflationary correlation functions in the limit where two external momenta are taken to be small. We derive these statements in two ways: using background-wave arguments and as Ward identities following from the fixed-time path integral. Interestingly, these identities allow us to constrain some of the O(q{sup 2}) components of the soft limit, in contrast to their single-soft analogues. We provide several nontrivial checks of our identities both in the context of resonant non-Gaussianities and in small sound speed models. Additionally, we extend the relation at lowest order in external momenta to arbitrarily many soft legs, and comment on the many-soft extension at higher orders in the soft momentum. Finally, we consider how higher soft limits lead to identities satisfied by correlation functions in large-scale structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗