Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multicomponent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Scalable aqueous-phase fabrication of reduced graphene oxide nanofiltration membranes by an integrated roll-to-roll (R2R) process

Economic fractionation of multicomponent biomass-derived streams is a key challenge in biobased fuels and chemicals production. Kraft black liquor (BL) is generated at ~1 billion tons/yr globally from biomass pulping and contains ~15wt% total solids including lignin, hemicellulose fragments, and inorganics. Membrane-based BL concentration is attractive but challenged by low solute rejections and poor stability in BL, which combines alkaline pH (~13), high dissolved solids content (15+ wt%) and high temperature (70–85°C). Here we discuss the scaled fabrication and characterization of reduced graphene oxide (rGO) nanofiltration membranes by slot die coating on a roll-to-roll (R2R) with integrated vacuum filtration. Here, we obtain high-quality 90×30 cm rGO membranes (referred to as “R2R-rGO membranes” in this work) with ~100 nm average thickness supported on porous poly(ethersulfone) (PES) sheets, and an effective area of 2700cm 2 . We present characterizations of their microstructure and uniformity as mapped over large areas by scanning electron microscopy (SEM), ellipsometry, adhesion test and X-ray photoelectron spectroscopy (XPS). The constructed ellipsometry model for the rGO membrane/PES substrate composite was successfully applied to 48 different locations of the R2R-rGO membranes. The R2R-rGO membranes showed >98% lignin rejection with a steady state flux of ~12 LMH at 50bar in a 15.7wt% total solids (TS) kraft BL stream at 72°C and 2–3 gal/min crossflow rates. Slot die coating on a R2R platform with integrated vacuum filtration can enable rapid fabrication of high-quality GO membranes at scale without organic solvents or volatile organic compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Amphiphile conformation impacts aggregate morphology and solution structure across multiple lengthscales

Although the self-assembly of amphiphiles is well-studied in aqueous solutions, much less is understood about the fundamental driving forces and structure property relationships in non-polar media. In recent work [Journal of Physical Chemistry B, 2020, 124, 10822.] the authors have studied a series of malonomide-based amphiphiles that are relevant to liquid-liquid extraction. That work demonstrated that aggregation is largely driven by local dipole-dipole interactions between molecules. Here, we build upon this observation to develop a more detailed understanding of how the balance of dipole-dipole interactions (controlled by conformation) and molecular architecture influences the morphology of the aggregates across lengthscales. Using constrained molecular dynamics about key degrees of freedom, we demonstrate that the conformation of N,N-dimethyl,N,N-dioctylhexylethoxy malonamide (DMDOHEMA) and N,N-dimethyl,N,N-dibutyltetradecyl malonamide (DMDBTDMA) has a significant impact upon self-association - where appropriate conformational sampling is essential. To quantify the aggregate morphology, several graph theoretic and persistent homology based properties are determined. The former examines the patterns of intermolecular interactions within clusters, while the latter examines the 3-dimensional spatial distribution. Based upon these analyses, we find that the morphology of aggregates, particularly at higher malonamide concentration, depends on a balance of dipole alignment and alkyl tail sterics. Dipole alignment encourages linear patterns of the intermolecular interactions within aggregates, while the alkyl tail steric interactions between the malonamide result in noticeably less linear aggregates for DMDOHEMA than DMDBTDMA. This is reflected in the spatial distribution, where more holes or voids exist between extractants within the DMDOHEMA that distribute within the solution in more of a "swiss cheese" arrangement as opposed to the more filamentous distribution of DMBDTDMA. This study links conformation and molecular structure to the morphology of amphiphile assemblies, and serves as a basis for ongoing study of multicomponent amphiphile solutions with polar and other solutes, and how these impact aggregation phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Additively manufactured refractory high-entropy alloys with superior radiation resistance

Refractory high-entropy alloys (RHEAs) are promising candidates for next-generation nuclear and high-temperature applications. Among many approaches to manufacture RHEAs, additive manufacturing (AM) represents the most recent and advanced metal manufacturing method which allows near-net-shape manufacturing to reduce material waste and post-processing time. However, performance of AM RHEAs under complex irradiation conditions remains largely unexplored. Here, in this study, we demonstrate for the first time the response of directed energy deposition (DED) AM quaternary RHEAs (HfTaVW, CrTaVW) subjected to sequential dual-beam ion irradiation, consisting of helium pre-implantation followed by high-dose heavy ion bombardment. Compositions of DED AM RHEAs were selected using Monte Carlo (MC) simulations based on a cluster expansion (CE) Hamiltonian parameterized by density functional theory (DFT). Post-irradiation microstructural characterization revealed that the AM RHEA maintained remarkable stability, with suppressed helium bubble growth and reduced defect accumulation compared to conventional alloys. Even at high doses (∼100 dpa), the alloy exhibited no void swelling, a low density of dislocation loops, and no evidence of severe degradation. These results highlight the intrinsic ability of AM-derived microstructures and multicomponent chemistry to synergistically mitigate irradiation effects. Our findings establish AM RHEAs as a class of materials with superior resistance to radiation damage under conditions relevant to advanced fusion and fission environments and demonstrate the importance of sequential ion beam studies in evaluating their long-term performance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Revealing local order via high energy EELS

Short range order (SRO) is critical in determining the performance of many important engineering materials. However, accurate characterization of SRO with high spatial resolution – which is needed for the study of individual nanoparticles and at material defects and interfaces – is often experimentally inaccessible. Here, we locally quantify SRO via scanning transmission electron microscopy with extended energy loss fine structure analysis. Specifically, we use novel instrumentation to perform electron energy loss spectroscopy out to 12 keV, accessing energies which are conventionally only possible using a synchrotron. Our data is of sufficient energy resolution and signal-to-noise ratio to perform quantitative extended fine structure analysis, which allows determination of local coordination environments. To showcase this technique, we investigate a multicomponent metallic glass nanolaminate and locally quantify the SRO with <10 nm spatial resolution; this measurement would have been impossible with conventional synchrotron or electron microscopy methods. Finally, we discuss the nature of SRO within the metallic glass phase, as well as the wider applicability of our approach for determining processing–SRO–property relationships in complex materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimizing quantification of MK6240 tau PET in unimpaired older adults

Accurate measurement of Alzheimer's disease (AD) pathology in older adults without significant clinical impairment is critical to assessing intervention strategies aimed at slowing AD-related cognitive decline. The U.S. Study to Protect Brain Health Through Lifestyle Intervention to Reduce Risk (POINTER) is a 2-year randomized controlled trial to evaluate the effect of multicomponent risk reduction strategies in older adults (60-79 years) who are cognitively unimpaired but at increased risk for cognitive decline/dementia due to factors such as cardiovascular disease and family history. The POINTER Imaging ancillary study is collecting tau-PET ([ 18 F]MK6240), beta-amyloid (Aβ)-PET ([ 18 F]florbetaben [FBB]) and MRI data to evaluate neuroimaging biomarkers of AD and cerebrovascular pathophysiology in this at-risk sample. Here 481 participants (70.0±5.0; 66% F) with baseline MK6240, FBB and structural MRI scans were included. PET scans were coregistered to the structural MRI which was used to create FreeSurfer-defined reference regions and target regions of interest (ROIs). We also created off-target signal (OTS) ROIs to examine the magnitude and distribution of MK6240 OTS across the brain as well as relationships between OTS and age, sex, and race. OTS was unimodally distributed, highly correlated across OTS ROIs and related to younger age and sex but not race. Aiming to identify an optimal processing approach for MK6240 that would reduce the influence of OTS, we compared our previously validated MRI-guided standard PET processing and 6 alternative approaches. The alternate approaches included combinations of reference region erosion and meningeal OTS masking before spatial smoothing as well as partial volume correction. To compare processing approaches we examined relationships between target ROIs (entorhinal cortex (ERC), hippocampus or a temporal meta-ROI (MetaROI)) SUVR and age, sex, race, Aβ and a general cognitive status measure, the Modified Telephone Interview for Cognitive Status (TICSm). Overall, the processing approaches performed similarly, and none showed a meaningful improvement over standard processing. Across processing approaches we observed previously reported relationships with MK6240 target ROIs including positive associations with age, an Aβ+> Aβ- effect and negative associations with cognition. In sum, we demonstrated that different methods for minimizing effects of OTS, which is highly correlated across the brain within subject, produced no substantive change in our performance metrics. This is likely because OTS contaminates both reference and target regions and this contamination largely cancels out in SUVR data. Caution should be used when efforts to reduce OTS focus on target or reference regions in isolation as this may exacerbate OTS contamination in SUVR data.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Numerical study of multi-component flow and mixing in a scaled fission product venting system

Numerical simulation of isothermal multi-component gas flow was conducted to study fluid flow and mixing in a scaled low-pressure, low-temperature test facility for the fission product venting system (FPVS) of a gas cooled fast reactor (GFR). The geometry of FPVS test facility was an open loop including gradual expansion coupling and two 90°pipe elbows. First, the validation of large eddy simulation (LES) wall-adapting local eddy-viscosity (WALE) turbulent model was performed for transitional flow in a circular pipe with gradual expansion. The reactingFOAM solver in OpenFOAM v8 was employed. By introducing appropriate turbulence disturbance at the flow inlet, such as turbulence intensity, the numerical results showed good agreement in (1) the velocity profile downstream of the pipe expansion measured by particle image velocimetry (PIV) in this study, and (2) the reattachment length reported in the literature. Using this validated model, the numerical simulation of flow and component mixing was performed for the FPVS with an inlet flowrate corresponding to a Reynolds number of 2,400 to investigate the flow behavior and component mixing. Standard deviation of the mass fraction of component, referred to as absolute mixing index (AMI), was calculated to quantify the mixing of components, showing that the component mixing length determined by AMI is related to the reattachment length downstream of the expansion. Additionally, this study was able to identify the best location in the FPVS test facility to measure the velocity and concentration profies where multicomponent flow is well mixed.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

A simple three-component mixing problem for the evaluation of a new reaction rate model

A simple computational mixing problem is presented which can be utilized to assess the behavior of Reynolds-averaged reaction rate models in a problem with temporally varying mixedness. In this problem, three mixing components are homogeneously distributed but initially separated in a triply periodic domain. Further, these components are initialized within a Taylor–Green-like velocity field, which creates a mixing history evolving from the so-called “no-mix limit” to a well-mixed state. Large-eddy simulation results from this problem in configurations involving both premixed and nonpremixed reactants are then compared with zero-dimensional Reynolds-averaged Navier–Stokes results utilizing a new model for multicomponent reacting mixtures. The new model is shown to appropriately respect the no-mix limit and outperforms an earlier model (Morgan, 2022), particularly at early times when components are near the no-mix limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Thermal diffusion, exhaust gas recirculation and blending effects on lean premixed hydrogen flames

Thermodiffusively-unstable lean premixed hydrogen flames are investigated using two-dimensional direct numerical simulation employing finite-rate chemical kinetics. Three databases are generated focussing on the inclusion of the Soret effect, the recirculation of exhaust gas, and blending with methane. A simple rescaling of a classic thermal diffusion model is presented and shown to mimic multicomponent diffusion with very low computational cost and little-to-no loss in accuracy. It is also shown that a previously developed model for mean local flame speeds in lean premixed hydrogen flames can still be used provided Soret effects are taken into account in one-dimensional calculations. The addition of exhaust gas to the unburned mixture is found to enhance thermodiffusive instability; the primary mechanism for this was shown to be the highly-efficient third-body nature of water, with the reduction of adiabatic flame temperature a second-order effect. Again, the existing mean local flame speed model proved sufficient. Finally, blending with methane was found to reduce the thermodiffusive response of the flame, more so than the existing model suggests, despite adjustment of the fuel Lewis number; an adapted model is presented to account for this.

08 HYDROGEN↗
DOE OSTI2020

Dynamics of polymer segments, polymer chains, and nanoparticles in polymer nanocomposite melts: A review

The addition of nanoparticles (NPs) to a polymer matrix, forming a polymer nanocomposite (PNC), is known to alter the microscopic dynamic processes of both species which leads to unique macroscopic material properties of the PNC. Because the NPs and polymers have overlapping characteristic length, time, and energy scales, the interactions within these materials are complex and the dynamics are interrelated. In this review, we present an overview of experimental, simulation, and theoretical results that probe multi-scale polymer and nanoparticle dynamics in polymer nanocomposites and navigate the dense parameter space presented by these multicomponent systems. Although a variety of PNC systems are mentioned, we focus this discussion on linear thermoplastics filled with hard spherical or cylindrical NPs in the melt state. We begin by introducing PNCs, the dynamic processes within them, and the importance of dynamics for properties and processing. At the smallest length and time scales, we discuss segmental dynamics in PNCs, including the role of polymer attributes, NP attributes, and NP-polymer interactions. Then, we present measurements of collective motions and intermediate (Rouse) dynamics in various PNC materials. At longer length and time scales, we discuss polymer center-of-mass diffusion in PNCs with either spherical or anisotropic NPs. We then explore the dynamics of the NPs in PNCs and polymer melts, including theoretical predictions, simulation results, and experimental observations. Lastly, we note some of the remaining challenges in probing dynamics in PNC materials and fundamentally studying PNCs more generally.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Predicting short-range order evolution in WTaCrVHf refractory high-entropy alloys

Short-range order (SRO) in multicomponent concentrated alloys affects their mechanical response. Hence, is paramount to understand how composition modifies the chemical ordering in the system to design materials with optimal properties. Here, in this work, we present a methodology to predict the SRO and thermodynamic properties in chemically complex systems and apply it to the WTaCrVHf quinary alloy. We observe that the addition of Hf significantly modifies the SRO, mainly at intermediate to low temperatures, matching experimental observations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A simple model for short-range ordering kinetics in multi-principal element alloys

Short-range ordering (SRO) in multi-principal element alloys influences material properties such as strength and corrosion. While some degree of SRO is expected at equilibrium, predicting the kinetics of its formation is challenging. We present a simplified isothermal concentration-wave (CW) model to estimate an effective relaxation time of SRO formation. Estimates from the CW model agree to within a factor of five with relaxation times obtained from kinetic Monte Carlo (kMC) simulations when above the highest ordering instability temperature. Further, the advantage of the CW model is that it only requires mobility and thermodynamic parameters, which are readily obtained from alloy mobility databases and Metropolis Monte Carlo simulations, respectively. The simple parameterization of the CW model and its analytical nature makes it an attractive tool for the design of processing conditions to promote or suppress SRO in multicomponent alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Novel Zwitterionic Chromatography Approach to Separate Lithium from Unconventional Resources

Lithium (Li) is a key element for clean energy technologies, and, accordingly, the global lithium demand has been increasing rapidly. Therefore, to meet the Li demand and maintain supply chain stability, it is critical to develop efficient lithium extraction technologies that allow exploitation of unconventional lithium resources, such as geothermal brines and inland brine streams. However, the recovery of Li from these resources is challenging due to low Li concentration, low ratios of Li/Na, Li/Mg, or Li/Ca, and complex feed compositions. To address this, we introduced a new Direct Lithium Extraction (DLE) process using Zwitterionic Chromatography (ZIC) to separate Li from other salts. Since salts are partitioned on ZIC under water elution, no reagent chemicals are needed, and the Li separation is not limited by the adsorption capacity. We prepared 13 different zwitterionic (ZI) resins to investigate the salt retention on various ZI groups and then screened out promising sorbents for efficient Li separation. It was found that salt retention was synergistically affected by the pore size and ZI configurations. Using carboxybetaine (QAC3CA) sorbents, multicomponent separations showed that Li can be partitioned from divalent salts or Na with selectivities of 1.8 or 1.9, respectively. Although the selectivity is relatively low, in real brine tests, Li was separated from Ca and Mg with 79.2 % yield, showing the potential for a continuous process to achieve high productivity and high yield. Simulation studies suggest the salt elution mechanism is related to the hydration reaction energy and the effective hydrated radius of cations.

critical minerals↗
DOE OSTI2019

High throughput crystal structure and composition mapping of crystalline nanoprecipitates in alloys by transmission Kikuchi diffraction and analytical electron microscopy

Statistically significant crystal structure and composition identification of nanocrystalline features such as nanoparticles/nanoprecipitates in materials chemistry and alloy designing using electron microscopy remains a grand challenge. In this paper, we reveal that differing crystallographic phases of nanoprecipitates in alloys can be mapped with unprecedented statistics using transmission Kikuchi diffraction (TKD), on typical carbon-based electron-transparent samples. Using a case of multiphase, multicomponent nanoprecipitates extracted from an improved version of 9% chromium Eurofer-97 reduced-activation ferritic-martensitic steel we show that TKD successfully identified more than thousand M 23 C 6 , MX, M 7 C 3 , and M 2 X ( M =Fe, Cr, W, V, Ta; X = C, N) nanoprecipitates in a single scan, something that is currently unachievable using a transmission electron microscope (TEM) without incorporating a precision electron diffraction (PED) system. Precipitates as small as ~20–25 nm were successfully phase identified by TKD. We verified the TKD phase identification using high-resolution transmission electron microscopy (HRTEM) and convergent beam electron diffraction (CBED) pattern analysis of a few precipitates that were identified by TKD on same sample. TKD study was combined with state-of-art analytical scanning transmission electron microscopy (STEM)-energy dispersive X-ray (EDX) spectroscopy and multivariate statistical analysis (MVSA) which provided the complete crystal structure and distinct chemistries of the precipitates in the steel in a high throughput automated way. This technique should be applicable to characterizing any multiphase crystalline nanoparticles or nanomaterials. Furthermore the results highlight that combining phase identification by TKD with analytical STEM and modern data analytics may open new pathways in big data material characterization at nanoscale that may be highly beneficial for characterizing existing materials and in designing new materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mesoporous Thin Film Architectures: Addressing Material Demands through Molecular Self-Assembly

Mesoporous thin films spark interest across a wide range of disciplines due to their tunable nanostructures, large internal surface areas, and strong compatibility with planar optical, electronic, and microfluidic devices. While attention in the porous materials community has shifted toward macroporous or disordered nanoporous systems, a resurgence in mesoporous thin film research is underway, driven by new molecular self-assembly methods, advanced materials chemistry, and improved characterization techniques. The integration of high-χN block copolymer design, kinetically persistent micelle templating, and postdeposition processing protocols now allows control over structural parameters such as pore size, wall thickness, porosity, and connectivity. These advances have overcome many of the thermodynamic and processing constraints that previously limited widespread adoption. Rather than serving only as high-surface-area supports, mesoporous thin films are engineered as active interfaces where responsive chemistries and nanoscale confinement act in tandem. Embedding switchable ligands, thermoresponsive polymers, redox mediators, or ion-selective groups directly within the pore walls enables real-time control over transport, optical, and electrochemical properties. These capabilities open up new directions in adaptive coatings, gated membranes, and fast-response biosensors. To further expand their functional scope, mesoporous films are integrated into hierarchical and multicomponent architectures. Techniques such as triblock terpolymer templating, crack-directed assembly, and nanoimprint lithography allow for control over spatial organization on the micron and submicron scale and pore system orientation. This enables programmable anisotropy, enhanced molecular diffusion, and wavelength-selective photonic behavior, essential for next-generation sensing, catalysis, and energy applications. Such structural and functional complexity requires equally sophisticated characterization. Multimodal and in situ techniques can track material dynamics under operational conditions. Recent progress includes extended-range ellipsometric porosimetry (EP) for hierarchical architectures, vacuum EP for interface energetics, time-resolved EP for diffusion kinetics, and correlative AFM-SAXS mapping. The introduction of advanced neutron-based spectroscopies, particularly quasielastic neutron scattering (QENS), promises to provide real-time access to ion transport dynamics and segmental motion under nanoscale confinement, offering a path toward deeper mechanistic understanding of structure-performance correlations in mesoporous systems. This Account reflects the technical advances made and the interdisciplinary collaborations that have shaped our collective vision. The particular dimensions of mesopores enable us to subtly tune interactions at the molecular, interfacial, and mesoscopic levels that permit us to harness nanoconfinement. What emerges is a versatile, modular platform capable of chemical gating, energy transduction, and sensing with a level of tunability unmatched by other porous materials. We highlight critical challenges including the need for more robust large-area processing, a deeper understanding of dynamic behavior under cycling, and better integration with device-level architectures. Our strategies support the transition of mesoporous thin films into active high-performance components in next-generation energy, environmental, and biomedical systems.

oxides↗
DOE OSTI2025

Dirhodium(II,II) Complexes as Panchromatic Single-Molecule Photocatalysts for Hydrogen Evolution

The growing global energy demand and climate change have prompted a shift from carbon-based fuels to sustainable energy sources. Hydrogen production by harnessing solar energy and using abundant proton sources represents an attractive approach to addressing this crisis. Single-molecule single-chromophore photocatalysts, capable of both absorbing the incident photon and catalyzing the chemical transformation, are able to circumvent energy losses present in multicomponent systems that require a photosensitizer and a catalyst, often employing additional redox relay molecules. Here, the series of complexes derived from cis-[Rh 2 (μ-DPhF) 2 (μ-bncn) 2 ] 2+ (1; DPhF = N,N′-diphenylformamidinate, bncn = benzo[c]cinnoline) discussed in this Account presents robust and air-stable single-molecule photocatalysts with panchromatic absorption from the ultraviolet spectral region to the near-infrared (NIR), with high turnover frequencies of ∼20 to 30 h –1 under red light irradiation. For comparison, other single-molecule hydrogen-evolving photocatalysts reported to date exhibit low photocatalytic efficiency, are not operable in the visible or NIR regions, and are unstable under an ambient atmosphere.

Absorption↗
DOE OSTI2017

Gold Polar Intermetallics: Structural Versatility through Exclusive Bonding Motifs

The design of new materials with desired chemical and physical characteristics requires thorough understanding of the underlying composition–structure–property relationships and the experimental possibility of their modification through the controlled involvement of new components. From this point of view, intermetallic phases, a class of compounds formed by two or more metals, present an endless field of combinations that produce several chemical compound classes ranging from simple alloys to true ionic compounds. Polar intermetallics (PICs) belong to the class that is electronically situated in the middle, between Hume–Rothery phases and Zintl compounds and possessing e/a (valence electron per atom) values around 2. In contrast to the latter, where logical rules of formation and classification systems were developed decades ago, polar intermetallics remain a dark horse with a huge diversity of crystal structures but unclear mechanisms of their formation. Partial incorporation of structural and bonding features from both nonpolar and Zintl compounds is commonly observed here. A decent number of PICs can be described in terms of complex metallic alloys (CMAs) following the Hume–Rothery electron-counting schemes but exhibit electronic structure changes that cannot be explained by the latter. Our research is aimed at the discovery and synthesis of new polar intermetallic compounds, their structural characterization, and investigation of their properties in line with the analysis of the principles connecting all of these components. Understanding of the basic structural tendencies is one of the most anticipated outcomes of this analysis, and systematization of the available knowledge is the initial and most important step. Here in this Account, we focus on a well-represented but rather small section of PICs: ternary intermetallic compounds of gold with electropositive and post-transition metals of groups 12 to 15. The strong influence of relativistic effects in its chemical bonding results in special, frequently unique structural motifs, while at the same time gold participates in common structure types as an ordinary transition element. Enhanced bonding strength leads to the formation and stabilization of complex homo- and heteroatomic clusters and networks that are compositionally restricted to just a few options throughout the periodic table. Because it has the highest absolute electronegativity among metals, comparable to those of some halogens, gold usually plays the role of an anion, even being able to form true salts with the most electropositive metals. We discuss the occurrence of the structure types and show the place of gold intermetallics in the general picture. Among the structures considered are ones as common as AlB 2 or BaAl 4 types, in line with the recently discovered diamond-like homoatomic metal networks, formation of local fivefold symmetry, different types of tunneled structures, and more complex intergrown multicomponent structures.

36 MATERIALS SCIENCE↗