Search NASA⌕ Search

SEARCH · Search NASA

Results for “Network structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Role of the Solvent–Surfactant Duality of Ionic Liquids in Directing Two-Dimensional Particle Assembly

Nanoparticle self-assembly plays a key role in formation of superlattices, which exhibit remarkable physical and chemical properties. However, controlling assembly remains a challenge partly due to a lack of understanding of the assembly dynamics and the difficulty in linking interfacial solution properties to interparticle forces. In this study, using liquid-cell transmission electron microscopy, self-assembly of gold nanoparticles (NPs) into superlattices in mixtures of water and ionic liquid (IL) was visualized, revealing a dual role of the IL in the assembly process. At intermediate concentrations, the IL acts as a surfactant stabilizing the particles at a well-defined equilibrium separation corresponding to the length of hydrogen bonded IL cations adsorbed onto neighboring NPs. Analysis of the interparticle forces reveals attractive long-range interactions of a van der Waals nature. At separations of 1-3 nm, interactions are dominated by attractive ion correlation and repulsive hydration forces giving rise to an energy minimum at 1.5 nm separation. The superlattice is further stabilized by hydrogen bonding, which shifts the equilibrium interparticle distance to 1.1 nm. In contrast, at higher concentrations, IL accumulates and forms a structured network in the gap between nanoparticles, where it acts as a solvent that eliminates the repulsive barrier and thus promotes particle coalescence. This solvent-surfactant duality of IL opens new opportunities for their use in directing particle assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Effect of Single Atom Cationic Defect Sites in an Al 2 O 3 (012) Surface on Altering Selenate and Sulfate Adsorption: An Ab Initio Study

Adsorption is a promising under-the-sink selenate remediation technique for distributed water systems. Recently it was shown that adsorption induced water network rearrangement control adsorption energetics on the α-Al 2 O 3 (012) surface. Here, we aim to elucidate the relative importance of the water network effects and surface cation identity on controlling selenate and sulfate adsorption energy using density functional theory calculations. Density functional theory (DFT) calculations predicted the adsorption energies of selenate and sulfate on nine transition metal cations (Sc–Cu) and two alkali metal cations (Ga and In) in the α-Al 2 O 3 (012) surface under simulated acidic and neutral pH conditions. We find that the water network effects had a larger impact on the adsorption energy than the cationic identity. However, cation identity secondarily controlled adsorption. Most cations decreased the adsorption energy, weakening the overall performance, the larger Sc and In cations enabled inner-sphere adsorption in acidic conditions because they relaxed outward from the surface, providing more space for adsorption. Additionally, only Ti induced Se selectivity over S by reducing the adsorbing selenate to selenite but not reducing the sulfate. Altogether, this study indicates that tuning water network structure will likely have a larger impact than tuning cation–selenate interactions for increasing adsorbate effectiveness.

Adsorption↗

Hydrogen-Doped Polymeric Carbon Monoxide at High Pressure

The ability to control materials stability, bonding, and transformation by thermo-mechanical and chemical means is significant for development of high-energy-density extended solids. We report that doping hydrogen (~10%) in carbon monoxide (CO) can greatly lower the polymerization pressure of CO and enhance the stability of recovered polymeric CO products at ambient conditions. Hydrogen-doped CO crystallizes into well-grown dendrites of β-CO-like phase at 3.2 GPa, which polymerizes to highly unsaturated black polymer (phase I) at ~4.7 (5.8) GPa. Upon further compression, this highly colored polymer transforms into a translucent 3D network structure (phase II) at 6–7 (10–17) GPa and then a transparent 2D layer structure (phase III) at 20–30 (30–60) GPa. A similar series of transformations are also found in pure CO but at considerably higher transition pressures, as noted in parentheses. All polymeric phases are recoverable at ambient conditions, exhibiting an array of phase stability and novel properties such as chemically unstable phase I, highly luminescent phase II, and highly transparent layered phase III. The density of recovered products ranges from ~2.3 g/cm 3 to 3.6 g/cm 3 , depending on the pressure recovered. The recovered products are highly disordered but slowly decompose to crystalline solids of anhydrous polymeric oxalic acid while exhibiting interesting crystal morphologies such as nm-cobs, nm-lamellar layers, and μm-bales. Here, the present first-principles MD simulations suggest that the polymerization occurs at 6 (or 10) GPa in H 2 -doped (or pure) CO. While not directly participating in the reaction, the role of H 2 molecules is to enhance the mobility of CO molecules leading to the polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proteomic Profiling of the Substantia Nigra to Identify Determinants of Lewy Body Pathology and Dopaminergic Neuronal Loss

Proteinaceous aggregates containing ?-synuclein protein called Lewy bodies in the substantia nigra is a hallmark of Parkinson’s disease. The molecular mechanisms of Lewy body formation and associated neuronal loss remain largely unknown. To gain insights on proteins and pathways associated with Lewy body pathology, we performed quantitative profiling of the proteome. We analyzed substantia nigra tissue from 51 subjects arranged into three groups: cases with Lewy body pathology, Lewy body-negative controls with matching neuronal loss and controls with no neuronal loss. Using label-free LC-MS/MS approach we quantified the 2,963 most abundant proteins. Statistical testing for differential protein abundance, followed by pathway enrichment and Bayesian learning of the causal network structure were performed to identify likely drivers of Lewy body formation and dopaminergic neuronal loss. The identified pathways include (1) Arp2/3 complex-mediated actin nucleation; (2) synaptic function; (3) poly(A) RNA binding; (4) basement membrane and endothelium; and (5) hydrogen peroxide metabolic process. According to the data, the endothelial/basement membrane pathway is tightly connected with both pathologies and likely to be one of the drivers of the neuronal loss. The poly(A) RNA-binding proteins, including the ones relevant to other neurodegenerative disorders (e.g. TDP-43 and FUS) have strong inverse correlation with Lewy bodies and may reflect alternative mechanism of nigral neurodegeneration.

Petyuk, Vladislav A.↗

Exchangeable Liquid Crystalline Elastomers: Enabling Rapid Processing and Enhanced Actuation Stability through On-Demand Deactivation

Exchangeable liquid crystalline elastomers (xLCEs) bearing dynamic covalent bonds are promising candidates for soft actuators due to their unique capability to adjust both network structure and liquid crystalline (LC) alignment after polymerization. While current xLCEs with low exchange temperatures are convenient for processing, they suffer from issues such as creep and loss of LC alignment during repeated thermal actuation. Herein, we present an effective solution using dynamic anhydride chemistry within a thiol-ene-based xLCE. This approach enables a catalyst-free, low-temperature bond exchange of the xLCE after polymerization, allowing for the adjustment of LC orientation under mild conditions. More importantly, it enables on-demand deactivation of the bond exchange via anhydride hydrolysis, effectively eliminating creep and enhancing actuation stability for over 100 cycles. Furthermore, the hydrolysis process results in the formation of carboxylic acid groups, which can be converted into carboxylates via alkali treatment, thereby providing the xLCE with humidity responsiveness. Finally, these findings highlight the use of dynamic anhydride bonds in the fabrication and optimization of xLCEs with enhanced durability and functionality, which is expected to facilitate significant advancements in their applications in soft actuators and robotics.

36 MATERIALS SCIENCE↗

Versatile Synthesis of Amine-Reactive Microgels by Self-Assembly of Azlactone-Containing Block Copolymers

Relations between molecular design, chemical functionality, and stimulus-triggered response are important for a variety of applications of polymeric systems. In this paper, reactive amphiphilic block copolymers (BCPs) of poly(2-vinylpyridine)-block-poly(2-vinyl-4,4-dimethylazlactone) (PVP-b-PVDMA) were synthesized and assembled into microgels capable of incorporating functional amines. The composition of the PVP-b-PVDMA BCPs was varied to control the number of reactive sites in the spherical aggregates created by self-assembly of PVP-b-PVDMA BCPs in a 2-propanol/THF (v:v = 19:1) solvent mixture, which is selective for PVP. PVDMA and PVP segments were selectively cross-linked by 1,4-diaminobutane (DAB) or 1,4-diiodobutane (DIB) to fabricate core- and corona-cross-linked azlactone-containing microgels, respectively. Non-cross-linked aggregates of PVP-b-PVDMA and DIB-cross-linked microgels dissociate when exposed to THF, which is a good solvent for both blocks. However, the DAB-cross-linked BCP microgels swell in THF, suggesting the formation of a stable, three-dimensional network structure. Finally, because of their ability to be reactively modified in ways that allows their stability or disassembly characteristics to be tailored, these azlactone-containing BCP microgels provide an attractive platform for applications in a wide range of fields, including catalysis, imaging, molecule separation, and guest loading for targeted delivery.

36 MATERIALS SCIENCE↗

Engineering Scale Simulation of Nonequilibrium Network Phases for Battery Electrolytes

According to the article, Diblock copolymers play an important role in the fabrication of battery materials and fuel cells. For these applications, one block provides mechanical stability, whereas the other is conducting. The application characteristics of the material critically depend on the morphology of the multicomponent material, and three-dimensional, percolating domains of the conducting domains are preferred. In this work, we investigate the nonequilibrium morphology of diblock copolymers after a quench from the disordered phase. After the spinodal self-assembly, we observe three-dimensionally percolating network structures for volume fractions, f ≥ 8/32, of the conducting component even if the equilibrium phases exhibit different percolation properties. We quantify the conductivity and tortuosity of these structures via a simple random-walk model and observe that the conductivity of the nonequilibrium structures is significantly smaller than that of the equilibrium phases. We also find large but finite-sized, fractal-like structures inside the morphology, which influence the transport properties. To explore the morphology on different scales and mitigate finite-size effects, we employ very large simulations with billions of particles. Our work demonstrates that for the prediction of bulk transport properties in these nonequilibrium morphologies it is necessary to study such large system sizes.

Polymer Science↗

Thermoresponsive Stiffening with Microgel Particles in a Semiflexible Fibrin Network

We report here temperature-responsive soft composites of semiflexible biopolymer networks (fibrin) containing dispersed microgel colloidal particles of poly(N-isopropylacrylamide) (pNIPAM) that undergo a thermodynamically driven deswelling transition above the lower critical solution temperature. Unlike standard polymer particle composites, decreasing the inclusion volume of the particles (by increasing temperature) is concomitant with a striking increase of the overall elastic stiffness of the composite. We observe such a behavior over a wide composition space. The composite elastic shear modulus reversibly stiffens by up to 10-fold over a small change in temperature from 25 to 35 °C. In isolation, the fibrin network and microgel suspension both soften with increased temperature, making the stiffening of the composites particularly significant. We hypothesize that stiffening is caused by the shrinking microgel particles that deform fibrin filaments, and modify the network structure. We further develop a phenomenological model that quantifies this hypothesis, and the derived predictions are qualitatively consistent with our experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adhesively Bonded Copper and Polyimide for Flexible Printed Circuit Boards: A Data-Driven Degradation Study Under Accelerated Aging

The long-term durability of polyimide laminated adhesive based flexible printed circuit boards (PCBs) is critical to the microelectronics industry. The interface of the adhesive layer binding the polyimide and copper layers is particularly vulnerable since decreased bonding strength can lead to deadhesion, performance loss, and premature device failure. Here, in this study, adhesive-bonded polyimide and copper samples are subjected to 1000 h of damp heat exposure (85 °C/85%RH) to evaluate the impact of moisture and copper inclusion on the adhesive bonding performance. Significant copper diffusion through the adhesive layer is observed, which, combined with moisture uptake, is found to substantially weaken interfacial adhesion in copper-containing samples, thereby reducing device lifetime. Observed surface and bulk material changes are correlated to adhesion strength using the network structural equation modeling (netSEM) approach, resulting in a robust predictive model of performance degradation based on measurable materials properties.

Chemistry↗

Real-Time Alignment and Reorientation of Polymer Chains in Liquid Crystal Elastomers

Liquid crystal elastomers (LCEs) exhibit soft elasticity due to the alignment and reorientation of mesogens upon mechanical loading, which provides additional mechanisms to absorb and dissipate energy. This enhanced response makes LCEs potentially transformative materials for biomedical devices, tissue replacements, and protective equipment. However, there is a critical knowledge gap in understanding the highly rate-dependent dissipative behaviors of LCEs due to the lack of real-time characterization techniques that probe the microscale network structure and link it to the mechanical deformation of LCEs. In this work, we employ in situ optical measurements to evaluate the alignment and reorientation degree of mesogens in LCEs. The data are correlated to the quantitative physical analysis using polarized Fourier-transform infrared spectroscopy. The time scale of mesogen alignment is determined at different strain levels and loading rates. The mesogen reorientation kinetics is characterized to establish its relationship with the macroscale tensile strain, and compared to theoretical predictions. Overall, this work provides the first detailed study on the time-dependent evolution of mesogen alignment and reorientation in deformed LCEs. It also provides an effective and more accessible approach for other researchers to investigate the structural-property relationships of different types of polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intra-molecular Charge Transfer and Electron Delocalization in Non-fullerene Organic Solar Cells

Two types of electron acceptors were synthesized by coupling two kinds of electron-rich cores with four equivalent perylene diimides (PDIs) at the a position. With fully aromatic cores, TPB and TPSe have pi-orbitals spread continuously over the whole aromatic conjugated backbone, unlike TPC and TPSi, which contain isolated PDI units due to the use of a tetrahedron carbon or silicon linker. Density functional theory calculations of the projected density of states showed that the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) for TPB are localized in separate regions of space. Further, the LUMO of TPB shows a greater contribution from the orbitals belonging to the connective core of the molecules than that of TPC. Overall, the properties of the HOMO and LUMO point at increased intra-molecular delocalization of negative charge carriers for TPB and TPSe than for TPC and TPSi and hence at a more facile intra-molecular charge transfer for the former. The film absorption and emission spectra showed evidences for the inter -molecular electron delocalization in TPB and TPSe, which is consistent with the network structure revealed by X-ray diffraction studies on single crystals of TPB. These features benefit the formation of charge transfer states and/or facilitate charge transport. Thus, higher electron mobility and higher charge dissociation probabilities under J sc condition were observed in blend films of TPB:PTB7-Th and TPSe:PTB7-Th than those in TPC:PTB7Th and TPSi:PTB7-Th blend films. As a result, the J sc and fill factor values of 15.02 mA/cm 2 , 0.58 and 14.36 mA/cm 2 , 0.55 for TPB- and TPSe-based solar cell are observed, whereas those for TPC and TPSi are 11.55 mA/cm 2 , 0.47 and 10.35 mA/cm 2 , 0.42, respectively.

14 SOLAR ENERGY↗

100th Anniversary of Macromolecular Science Viewpoint: Fundamentals for the Future of Macromolecular Nitroxide Radicals

Macromolecular radicals, radical polymers, and polyradicals bear unique functionalities derived from their pendant radical groups. Here, the increasing need for organic functional materials is driving the growth in research interest in macromolecular radicals for batteries, electronics, memory, and imaging. This Viewpoint summarizes the current state-of-knowledge regarding the macromolecular nitroxide radicals’ redox mechanism, conductivity, chain conformation, controlled polymerization, network structure, conjugated forms, and applications. The nitroxide radical group is the focus because it is the most widely studied. Although most literature focuses upon applications, an emerging body of work is highlighting the fundamental physicochemical properties of macromolecular radicals. To this end, this Viewpoint recommends areas of opportunity in fundamental studies and best practices in reporting.

36 MATERIALS SCIENCE↗

Solvent-Mediated Control of Nanocellulose Dispersion: An Integrated Computational and Experimental Investigation

Fibrillated cellulose derived from forestry feedstocks represents a renewable and high-strength materials platform for circular bioeconomies. However, its practical implementation is hindered by the irreversible aggregation of nanocellulose architectures, including cellulose nanofibers (CNFs). Solvent-based dispersion offers a simple and practical route to prevent CNF aggregation. Here, in this work, we integrate classical and enhanced sampling molecular dynamics (MD) simulations with experimental suspension rheology and atomic force microscopy (AFM) to elucidate how solvent environments tune CNF–CNF interactions and dispersion stability. CNF–CNF contact free energies computed from MD simulations reveal reduced aggregation in acetone/water, γ-valerolactone (GVL)/water, and tetrahydrofuran (THF)/water and pure acetone compared with pure water, reflecting stronger CNF-solvent relative to inter-CNF interactions. Correspondingly, CNF-solvent suspensions in these solvent systems exhibit stronger inter-fibril network structures and enhanced recovery compared to water, indicating improved CNF-solvent affinity. Liquid cell AFM imaging in acetone–water mixtures and in pure acetone further confirm the presence of well-dispersed CNFs. By combining multiscale computation with targeted experiments, this study establishes a rational framework for solvent design to achieve stable nanocellulose dispersions for high-strength biobased materials and efficient bioenergy conversion.

cellulose↗

Controlled Assembly of Lignocellulosic Biomass Components and Properties of Reformed Materials

Reforming whole lignocellulosic biomass into value-added materials has yet to be achieved mainly due to the infusible nature of biomass and its recalcitrance to dissolve in common organic solvents. Recently, the solubility of biomass in ionic liquids (ILs) has been explored to develop all-lignocellulosic materials; however, efficient dissolution and therefore production of value-added materials with desired mechanical properties remain a challenge. This article presents an approach to producing high-performance lignocellulosic films from hybrid poplar wood. An autohydrolysis step that removes ≤50% of the hemicellulose fraction is performed to enhance biomass solvation in 1-ethyl-3-methyl imidazolium acetate ([C2mim][OAc]). The resulting biomass–IL solution is then cast into free-standing films using different coagulating solvents, yet preserving the polymeric nature of the biomass constituents. Methanol coagulated films exhibit a cocontinuous 3D-network structure with dispersed domains of less than 100 nm. The consolidated films with controllable morphology and structural order demonstrate tensile properties better than those of quasi-isotropic wood. Here, the methods for producing these biomass derivatives have potential for fabricating novel green materials with superior performance from woody and grassy biomass.

09 BIOMASS FUELS↗

Micromodel Investigation of Transport Effect on the Kinetics of Reductive Dissolution of Hematite

Reductive dissolution of hematite in porous media was investigated using a micromodel with realistic pore network structures that include distinctive advection domain, macro-pores and micro-pores created in silicon substrate. The micromodel pore surface was sputter deposited with a thin layer (230 nm) of hematite. The hematite in the micromodel was reduced by injecting pH-varying solutions containing a reduced form of flavin mononucleotide (FMNH2), a biogenic soluble electron transfer mediator produced by Shewanella species. The reduction kinetics was determined by measuring effluent Fe(II) concentration and by spectroscopically monitoring the hematite dissolution front in the micromodel. Batch experiment was also performed to estimate the hematite reduction rate under the well-mixed condition. The results showed a significant spatial variation in local redox reaction rate that was controlled by the coupled diffusion and reaction. The overall rate of the redox reaction in the micromodel required a three-domain numerical model to effectively describe with distinctive rate parameters in different pore domains. Results from this study demonstrated the important scaling effect when extrapolating geochemical or biogeochemical reaction rate from batch reactor to porous media and indicated a significant control of physical transport mechanisms on the reaction rate scaling.

Reactive transport, porous media, hematite↗

Electrodeposition of Magnonic V(tetracyanoethylene) 2 Thin Films

Molecule-based magnetic materials have been identified as promising candidates for application in magnonic technologies, owing not only to their solution processability but also because they can exhibit narrow ferromagnetic resonance (FMR) linewidths and low Gilbert damping coefficients—crucial prerequisites for the transmission of coherent magnons over macroscopic distances. In particular, V(TCNE) 2 , a compound with a threedimensional network structure composed of vanadium(II) centers linked by tetracyanoethylene (TCNE •− ) radical anions, displays magnonic properties comparable to yttrium iron garnet, the quintessential magnonic material in the field. However, existing solution and chemical vapor deposition methods for synthesizing V(TCNE) 2 require the use of highly reactive zero-valent molecular vanadium precursors, stymying research on this important material. Herein, we report a facile electrochemical method for the deposition of thin films of V(TCNE) 2 using readily obtainable and stable divalent vanadium precursors and TCNE •− anions generated by electrochemical reduction. Magnetization measurements reveal that the films exhibit ferrimagnetic ordering above room temperature, consistent with V(TCNE) 2 films synthesized via other methods. Moreover, the electrodeposited films exhibit narrow FMR linewidths as low as 17.5 G and a low Gilbert damping coefficient of 1.1 × 10 −3 , values that are on par with some currently integrated metallic magnonic materials. More generally, these results demonstrate that electrodeposition can provide a straightforward means of generating highperformance magnonic materials using readily available molecular precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-Situ TEM Study Of Lithiation Behavior Of Silicon Nanoparticles Attached To And Embedded In A Carbon Matrix

Rational design of silicon and carbon nanocomposite with a special topological feature has been demonstrated to be a feasible way for mitigating the capacity fading associated with the large volume change of silicon anode in lithium ion batteries. Although the lithiation behavior of silicon and carbon as individual component has been well understood, lithium ion transport behavior across a network of silicon and carbon are still lacking. In this paper, we probe the lithiation behavior of silicon nanoparticles attached to and embedded in a carbon nanofiber using in-situ TEM and continuum mechanical calculation. We found that aggregated silicon nanoparticles show contact flattering upon initial lithiation, which is characteristically analogous to the classic sintering of powder particles by neck-growth mechanism. As compared with the surface-attached silicon particle, particles embedded in the carbon matrix show delayed lithiation. Depending on the strength of the carbon matrix, lithiation of the embedded silicon nanoparticle can lead to the fracture of the carbon fiber. These observations provide insights on lithium ion transport in the network structured composite of silicon and carbon, and ultimately provide fundamental guidance for mitigating the failure of battery due to the large volume change of silicon anode.

Environmental Molecular Sciences Laboratory↗

Monolithic Gyroidal Mesoporous Mixed Titanium–Niobium Nitrides

Mesoporous transition metal nitrides are interesting materials for energy conversion and storage applications due to their conductivity and durability. We present ordered mixed titanium–niobium (8:2, 1:1) nitrides with gyroidal network structures synthesized from triblock terpolymer structure-directed mixed oxides. The materials retain both macroscopic integrity and mesoscale ordering despite heat treatment up to 600 °C, without a rigid carbon framework as a support. Furthermore, the gyroidal lattice parameters were varied by changing polymer molar mass. This synthesis strategy may prove useful in generating a variety of monolithic ordered mesoporous mixed oxides and nitrides for electrode and catalyst materials.

36 MATERIALS SCIENCE↗