Search NASA⌕ Search

SEARCH · Search NASA

Results for “PERFORMANCE CHARACTERISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Modeling and Simulation of Reliability & Maintainability Parameters for Reusable Launch Vehicles using Design of Experiments

This paper describes the development of a methodology for estimating reliability and maintainability distribution parameters for a reusable launch vehicle. A disciplinary analysis code and experimental designs are used to construct approximation models for performance characteristics. These models are then used in a simulation study to estimate performance characteristic distributions efficiently. The effectiveness and limitations of the developed methodology for launch vehicle operations simulations are also discussed.

Unal, Resit↗

Ion thruster thermal characteristics and performance.

Experimental and analytical studies of mercury-fed hollow cathode ion thrusters are presented. Pertinent thermal properties and plasma heating characteristics of the system have been determined through correlation and integration of temperature measurement data with a single stage Wiener-Kalman estimation technique. The resultant analytical network model is applied to predict the thermal performance of specified thruster systems under various operating conditions. The effects of solar intensity levels on the thruster thermal behavior, the dependency on the thruster dimension and multithruster design arrangements have been examined.

Wen, L.↗

Thermoforming of Continuous Fibre Reinforced Thermoplastic Composites

The introduction of new materials, particularly for aerospace products, is not a simple, quick or cheap task. New materials require extensive and expensive qualification and must meet challenging strength, stiffness, durability, manufacturing, inspection and maintenance requirements. Growth in industry acceptance for fibre reinforced thermoplastic composite systems requires the determination of whole life attributes including both part processing and processed part performance data. For thermoplastic composite materials the interactions between the processing parameters, in-service structural performance and end of life recyclability are potentially interrelated. Given the large number and range of parameters and the complexity of the potential relationships, understanding for whole life design must be developed in a systematic building block approach. To assess and demonstrate such an approach this article documents initial coupon level thermoforming trials for a commercially available fibre reinforced thermoplastic laminate, identifying the key interactions between processing and whole life performance characteristics. To examine the role of the thermoforming process parameters on the whole life performance characteristics of the formed part requires a series of manufacturing trials combined with a series of characterisation tests on the manufacturing trial output. Using a full factorial test programme and considering all possible process parameters over a range of potential magnitudes would result in a very large number of manufacturing trials and accompanying characterisation tests. Such an approach would clearly be expensive and require significant time to complete, therefore failing to address the key requirement for a future design methodology capable of rapidly generating design knowledge for new materials and processes. In this work the role of mould tool temperature and blank forming temperature on the thermoforming of a commercially available thermoplastic based composite laminate is investigated followed by post processed part characterization. Key findings include an optimized composite processing window, and the influence of raw material blank forming temperature and mould tool temperature on part crystallinity and flexural strength. This process study forms one element of a major project structure which has been designed to address the gap between design, analysis and manufacturing, using at its core, a digital framework for the creation and management of performance parameters related to the lifecycle performance of thermoplastic composite structures.

36 MATERIALS SCIENCE↗

Performance of Compressor XJ-41-V Turbojet Engine I - Preliminary Investigation at Equivalent Compressor Speed of 8000 RPM

At the request of the Air Material Command, Arm Air Forces, an investigation was conducted at the NACA Cleveland laboratory to determine the performance characteristics of the XJ-41-V turbojet-engine compressor. The complete compressor was mounted on a collecting chamber having an annular air-flow passage simulating the burner annulus of the engine and was driven by an electric motor. The compressor was extensively instrumented to determine the overall performance of the compressor, the characteristic performance of each of the compressor components, the state of the air stream in the simulated burner annulus, and the operation of the compressor bearings. An initial investigation at an equivalent compressor speed of 8000 rpm was made to determine the performance of the compressor and the collecting chamber and to determine the similarity of the air stream at the entrance to the simulated burner annulus. The mechanical performance of the compressor over a range of actual compressors speeds from 3300 to 8000 rpm is reported.

Ginsburg, Ambrose↗

Electrochemical storage

The source of the problem within the individual single cell which is related to the stochastic properties of cell populations and to the actual electrochemistry and chemistry taking place is described. The complications which arise in multicell batteries to show how different electrochemistries might alleviate or accentuate these problems is described. The concept of the electrochemical system is introduced to show how certain shortcomings of the single cell/battery string concept can be circumvented. Some of these electrochemical systems permit performance characteristics that are impossible by using conventional battery design philosophies. Projections for energy density and performance characteristics of the concepts are addressed.

Thaller, L. H.↗

The 2001 Mars In-Situ-Propellant-Production Precursor (MIP) Flight Demonstration

The successful performance of the five individual demonstrations of MARS IN-SITU-PROPELLANT-PRODUCTION PRECURSOR (MIP) will provide both knowledge of and confidence in the reliability of this technology. At the completion of this flight demonstration, the MIP Team will be able to: a) recommend preferred hardware configurations for the intake and adsorption of carbon dioxide from the Martian atmosphere; b) understand the performance characteristics of zirconia cells to generate propellant-grade oxygen; c) understand long-term performance characteristics of advanced solar cells/arrays operated in the actual Mars environment; d) evaluate the functionality of methods to mitigate the deposition of airborne dust onto solar arrays; and e) recommend preferred hardware designs for innovative thermal management including the radiation of heat to the outside environment.

Kaplan, David I.↗

Processing unit performance projection using dynamic hardware behaviors

Methods for estimating accelerator performance for dynamic hardware behaviors are disclosed. Computer program code to be executed on a first processing unit is received, and an execution of the computer code on the first processing unit is monitored to determine a plurality of performance characteristics. A plurality of dynamic hardware behaviors is determined by applying a clustering algorithm to the performance characteristics, and an equivalent accelerator portion of computer code to be executed on a second processing unit is generated by translating a set of instructions in a first portion of computer code corresponding to a first one of the plurality of dynamic hardware behaviors to an equivalent set of instructions to be executed on the second processing unit. An estimated measure of performance for executing the equivalent accelerator portion on the second processing unit is determined for the first one of the plurality of dynamic hardware behaviors.

97 MATHEMATICS AND COMPUTING↗

Durability of Corrosion Protection Coatings for Aluminum

The objectives of this work are to (1) Develop a detailed understanding of the performance characteristics of current chromate conversion coatings utilized in the stockpile, (2) Develop a detailed understanding of the performance characteristics of non-chromate conversion coatings proposed to replace their chromate containing counterparts, (3) Provide an informed assessment of the aforementioned coatings and a recommended course of action for the replacement of chromate containing coatings, and (4) establish subject matter expertise in the area of replacement coatings to provide as a resource to the systems organization. These tasks will be accomplished by performing a battery of traditional corrosion performance tests (in accordance with the relevant MIL specifications governing chemical conversion coatings), combined with more detailed analytical evaluation of the materials. Coatings will be evaluated in the as-received and artificially aged condition. Four different coating systems were evaluated on four different aluminum alloys in FY16. The focus this year was to continue populating the test matrix initiated in previous years, evaluating key coatings in the as received and thermally stressed condition, as compared to the baseline chromate conversion coating (Bonderite (formerly Alodine) 1200S). The non-chromate conversion coatings included Bonderite T 5900, Chemeon TCP-HF, Luster-On Aluminescent, and MacDermid-Enthone Iridite NCP. A second effort that was completed this year was to address a bottleneck that existed for the electrical evaluation of the coatings, assessing their conformance with the MIL specification. An electromechanical test system was assembled and automated, eliminating the need to rely on an already heavily utilized mechanical test system and operator in Materials Mechanics and Tribology.

36 MATERIALS SCIENCE↗

Performance evaluation of Space Shuttle SRB parachutes from air drop and scaled model wind tunnel tests

The aerodynamic performance characteristics have been determined for the Space Shuttle Solid Rocket Booster drogue, main, and pilot parachutes. The performance evaluation on the 20-degree conical ribbon parachutes is based primarily on air drop tests of full scale prototype parachutes. In addition, parametric wind tunnel tests were performed and used in parachute configuration development and preliminary performance assessments. The wind tunnel test data are compared to the drop test results and both sets of data are used to determine the predicted performance of the Solid Rocket Booster flight parachutes. Data from other drop tests of large ribbon parachutes are also compared with the Solid Rocket Booster parachute performance characteristics. Parameters assessed include full open terminal drag coefficients, reefed drag area, opening characteristics, clustering effects, and forebody interference.

Moog, R. D.↗

Development and evaluation of a predictive algorithm for telerobotic task complexity

There is a wide range of complexity in the various telerobotic servicing tasks performed in subsea, space, and hazardous material handling environments. Experience with telerobotic servicing has evolved into a knowledge base used to design tasks to be 'telerobot friendly.' This knowledge base generally resides in a small group of people. Written documentation and requirements are limited in conveying this knowledge base to serviceable equipment designers and are subject to misinterpretation. A mathematical model of task complexity based on measurable task parameters and telerobot performance characteristics would be a valuable tool to designers and operational planners. Oceaneering Space Systems and TRW have performed an independent research and development project to develop such a tool for telerobotic orbital replacement unit (ORU) exchange. This algorithm was developed to predict an ORU exchange degree of difficulty rating (based on the Cooper-Harper rating used to assess piloted operations). It is based on measurable parameters of the ORU, attachment receptacle and quantifiable telerobotic performance characteristics (e.g., link length, joint ranges, positional accuracy, tool lengths, number of cameras, and locations). The resulting algorithm can be used to predict task complexity as the ORU parameters, receptacle parameters, and telerobotic characteristics are varied.

Gernhardt, M. L.↗

Microstrip antenna study for Pioneer Saturn/Uranus atmosphere entry probe

The design parameters of a microstrip antenna were studied to determine its performance characteristics as affected by an atmospheric entry probe environment. The technical literature was reviewed to identify the known design and performance characteristics. These data were used to evaluate the expected effects of mission environments on the microstrip antenna design proposed for the Saturn/Uranus Atmospheric Entry Probe (SAEP). Radiation patterns and VSWR measurements were made to evaluate the performance in the SAEP thermal environment. Results of the literature search and pattern tests confirm that the microstrip antenna is a good choice as a transmitting antenna on the SAEP. The microstrip antenna is efficient, compact, and well suited to a space environment. The pattern can be controlled with a minimum beamwidth of 60 degrees (air substrate; e.g., honeycomb structure) and a maximum on the order of 100 degrees with higher dielectric constant substrates. The power handling capacity is good and can be improved by covering the antenna with a dielectric cover.

Kuhlman, E. A.↗

Multi-objective Bayesian alloy design using multi-task Gaussian processes

In design applications, correlations among material properties (such as the tendency for stronger materials to be less ductile) are often neglected. This approach is echoed in multi-objective optimization techniques which treat each performance characteristic as an independent objective, aiming to optimize scalar functions and find optimal Pareto fronts. However, this overlooks the statistical relationships between performance characteristics inherent in a material system. To address this, we propose the use of Bayesian optimization, a highly efficient black-box optimization algorithm known for constructing Gaussian processes (GPs) – uncorrelated surrogates - to model objective functions. Rather than evaluating multiple GPs for each objective function separately, we argue for a shift towards jointly modeling these objective functions, considering their statistical correlations. This integrated approach utilizes naturally occurring relationships among material properties, providing additional information to enhance the performance of the design framework. This requires the replacement of multiple independent GPs with a single multi-task GP, employing a correlation matrix to construct a multi-task kernel function, wherein each task corresponds to a single objective function. Here, we anticipate this refined methodology will better leverage material correlations, improving design optimization results.

36 MATERIALS SCIENCE↗

Performance and breakdown characteristics of irradiated vertical power GaN P-i-N diodes

Electrical performance and defect characterization of vertical GaN P-i-N diodes before and after irradiation with 2.5 MeV protons and neutrons is investigated. Devices exhibit increase in specific on-resistance following irradiation with protons and neutrons, indicating displacement damage introduces defects into the p-GaN and n- drift regions of the device that impact on-state device performance. The breakdown voltage of these devices, initially above 1700 V, is observed to decrease only slightly for particle fluence <; 10 13 cm -2 . Furthermore, the unipolar figure of merit for power devices indicates that while the on-resistance and breakdown voltage degrade with irradiation, vertical GaN P-i-Ns remain superior to the performance of the best available, unirradiated silicon devices and on-par with unirradiated modern SiC-based power devices.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The space telescope observatory

A guide to the expected characteristics of the space telescope (ST) observatory is presented. The general objectives of the ST observatory are summarized. The plans for the development of the observatory are described with a brief history of the scientific activities; an account of the scope of the present program; a summary of the major responsibilities of the contractors; and a list of the project milestones are included. The performance characteristics of the observatory are provided including the imaging and stray light characteristics, pointing capability, and operational access. The expected performance characteristics of all six of the first generation science instruments are summarized. The mode of operations is described which includes a discussion of program options, guide star selection, methods of acquisition, and quick look data capabilities.

Bahcall, J. N.↗

Advanced radiographic imaging techniques.

Examination of the nature and operational constraints of conventional X-radiographic and neutron imaging methods, providing a foundation for a discussion of advanced radiographic imaging systems. Two types of solid-state image amplifiers designed to image X rays are described. Operational theory, panel construction, and performance characteristics are discussed. A closed-circuit television system for imaging neutrons is then described and the system design, operational theory, and performance characteristics are outlined. Emphasis is placed on a description of the advantages of these imaging systems over conventional methods.

Beal, J. B.↗

Performance Dependences of Multiplication Layer Thickness for InP/InGaAs Avalanche Photodiodes Based on Time Domain Modeling

InP/InGaAs avalanche photodiodes (APDs) are being widely utilized in optical receivers for modern long haul and high bit-rate optical fiber communication systems. The separate absorption, grading, charge, and multiplication (SAGCM) structure is an important design consideration for APDs with high performance characteristics. Time domain modeling techniques have been previously developed to provide better understanding and optimize design issues by saving time and cost for the APD research and development. In this work, performance dependences on multiplication layer thickness have been investigated by time domain modeling. These performance characteristics include breakdown field and breakdown voltage, multiplication gain, excess noise factor, frequency response and bandwidth etc. The simulations are performed versus various multiplication layer thicknesses with certain fixed values for the areal charge sheet density whereas the values for the other structure and material parameters are kept unchanged. The frequency response is obtained from the impulse response by fast Fourier transformation. The modeling results are presented and discussed, and design considerations, especially for high speed operation at 10 Gbit/s, are further analyzed.

Xiao, Yegao↗

Identify and Quantify the Mechanistic Sources of Sensor Performance Variation Between Individual Sensors SN1 and SN2

This Technical Letter Report satisfies the M3AR-14PN2301022 milestone, and is focused on identifying and quantifying the mechanistic sources of sensor performance variation between individual 22-element, linear phased-array sensor prototypes, SN1 and SN2. This effort constitutes an iterative evolution that supports the longer term goal of producing and demonstrating a pre-manufacturing prototype ultrasonic probe that possesses the fundamental performance characteristics necessary to enable the development of a high-temperature sodium-cooled fast reactor inspection system. The scope of the work for this portion of the PNNL effort conducted in FY14 includes performing a comparative evaluation and assessment of the performance characteristics of the SN1 and SN2 22 element PA-UT probes manufactured at PNNL. Key transducer performance parameters, such as sound field dimensions, resolution capabilities, frequency response, and bandwidth are used as a metric for the comparative evaluation and assessment of the SN1 and SN2 engineering test units.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗