Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOTOELECTRIC EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

477 records · Page 27

Influence of PbCl{sub 2} content in PbI{sub 2} solution of DMF on the absorption, crystal phase, morphology of lead halide thin films and photovoltaic performance in planar perovskite solar cells

In this paper, the influence of PbCl{sub 2} content in PbI{sub 2} solution of DMF on the absorption, crystal phase and morphology of lead halide thin films was systematically investigated and the photovoltaic performance of the corresponding planar perovskite solar cells was evaluated. The result revealed that the various thickness lead halide thin film with the small sheet-like, porous morphology and low crystallinity can be produced by adding PbCl{sub 2} powder into PbI{sub 2} solution of DMF as a precursor solution. The planar perovskite solar cell based on the 300-nm-thick CH{sub 3}NH{sub 3}PbI{sub 3−x}Cl{sub x} thin film by the precursor solution with the mixture of 0.80 M PbI{sub 2} and 0.20 M PbCl{sub 2} exhibited the optimum photoelectric conversion efficiency of 10.12% along with an open-circuit voltage of 0.93 V, a short-circuit photocurrent density of 15.70 mA cm{sup −2} and a fill factor of 0.69. - Graphical abstract: The figure showed the surface and cross-sectional SEM images of lead halide thin films using the precursor solutions: (a) 0.80 M PbI{sub 2}, (b) 0.80 M PbI{sub 2}+0.20 M PbCl{sub 2}, (c) 0.80 M PbI{sub 2}+0.40 M PbCl{sub 2}, and (d) 0.80 M PbI{sub 2}+0.60 M PbCl{sub 2}. With the increase of the PbCl{sub 2} content in precursor solution, the size of the lead halide nanosheet decreased and the corresponding thin films gradually turned to be porous with low crystallinity. - Highlights: • Influence of PbCl{sub 2} content on absorption, crystal phase and morphology of thin film. • Influence of perovskite film thickness on photovoltaic performance of solar cell. • Lead halide thin film with small sheet-like, porous morphology and low crystallinity. • Planar solar cell with 300 nm-thick perovskite thin film achieved PCE of 10.12%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Active Electrostatic flight for airless bodies

The environment near the surface of asteroids, comets, and the Moon is electrically charged due to the Sun’s photoelectric bombardment and lofting dust, which follows the Sun illumination as the body spins. Charged dust is ever present, in the form of dusty plasma, even at high altitudes, following the solar illumination. If a body with high surface resistivity is exposed to the solar wind and solar radiation, sunexposed areas and shadowed areas become differentially charged. The E-Glider (Electrostatic Glider) is an enabling capability for operation at airless bodies, a solution applicable to many types of in-situ missions, which leverages the natural environment. This platform directly addresses the "All Access Mobility" Challenge, one of the NASA’s Space Technology Grand Challenges. Exploration of comets, asteroids, moons and planetary bodies is limited by mobility on those bodies. The lack of an atmosphere, the low gravity levels, and the unknown surface soil properties pose a very difficult challenge for all forms of know locomotion at airless bodies. This EGlider levitates by extending thin, charged, appendages, which are also articulated to direct the levitation force in the most convenient direction for propulsion and maneuvering. The charging is maintained through continuous charge emission. It lands, wherever it is most convenient, by retracting the appendages or by firing a cold-gas thruster, or by deploying an anchor. Preliminary calculations indicate that a 1 kg mass can be electrostatically levitated in a microgravity field with a 2 m diameter electrostatically inflated ribbon structure at 19kV, hence the need for a “balloon-like” system. The wings could be made of very thin Au-coated Mylar film, which are electrostatically inflated, and would provide the lift due to electrostatic repulsion with the naturally charged asteroid surface. Since the E-glider would follow the Sun’s illumination, the solar panels on the vehicle would constantly charge a battery. Further articulation at the root of the lateral strands or inflated membrane wings, would generate a component of lift depending on the articulation angle, hence a selective maneuvering capability which, to all effects, would lead to electrostatic (rather than aerodynamic) flight.

Schaub, Hanspeter↗

SU-F-T-33: Air-Kerma Strength and Dose Rate Constant by the Full Monte Carlo Simulations

Purpose: In general, the air-kerma strength (Sk) has been determined by the energy weighting the photon energy fluence and the corresponding mass-energy absorption coefficient or mass-energy transfer coefficient. Kerma is an acronym for kinetic energy released per unit mass, defined as the sum of the initial kinetic energies of all the charged particles. Monte Carlo (MC) simulations can investigate the kinetic energy of the charged particles after photo interactions and sum the energy. The Sk of {sup 192}Ir source is obtained in the full MC simulation and finally the dose rate constant Λ is determine. Methods: MC simulations were performed using EGS5 with the microSelectron HDR v2 type of {sup 192}Ir source. The air-kerma rate obtained to sum the electron kinetic energy after photoelectric absorption or Compton scattering for transverse-axis distance from 1 to 120 cm with a 10 m diameter air phantom. Absorbed dose in water is simulated with a 30 cm diameter water phantom. The transport cut-off energy is 10 keV and primary photons from the source need two hundred and forty billion in the air-kerma rate and thirty billion in absorbed dose in water. Results: Sk is multiplied by the square of the distance in air-kerma rate and determined by fitting a linear function. The result of Sk is (2.7039±0.0085)*10-{sup −11} µGy m{sup 2} Bq{sup −1} s{sup −1}. Absorbed dose rate in water at 1 cm transverse-axis distance D(r{sub 0}, θ{sub 0}) is (3.0114±0.0015)*10{sup −11} cGy Bq{sup −1} s{sup −1}. Conclusion: From the results, dose rate constant Λ of the microSelectron HDR v2 type of {sup 192}Ir source is (1.1137±0.0035) cGy h{sup −1} U{sup −1} by the full MC simulations. The consensus value conΛ is (1.109±0.012) cGy h{sup −1} U{sup −1}. The result value is consistent with the consensus data conΛ.

60 APPLIED LIFE SCIENCES↗

A density functional theory and time-dependent density functional theory investigation on the anchor comparison of triarylamine-based dyes

To understand the effects of the anchor part in organic dyes on the energy conversion efficiency of dye-sensitized solar cells (DSCs), two different anchor groups used in metal-free triphenylamine (TPA)-based organic dyes for DSCs have been theoretically compared. Density functional theory (DFT) and time-dependent DFT (TDDFT) study of geometry properties, excitations, and electronic structures of triarylamine-based dyes (TC1 and TPAR1) before and after binding to titanium has been performed under the level of TD-PBE1PBE/6-311G(d,p)//B3LYP/6-311G(d,p). The result shows that cyanoacrylic acid anchor favors better photoelectrochemical properties of DSCs than that of rhodanine-3-acetic acid anchor via providing more shift of TiO{sub 2} conduction band toward the vacuum energy levels (larger open circuit potentials) and more favorable conjugation with titanium. This study is expected to shed light on the design of metal-free organic dyes for DSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

E-Glider: Active Electrostatic Flight for Airless Body Exploration

The environment near the surface of asteroids, comets, and the Moon is electrically charged due to the Sun's photoelectric bombardment and lofting dust, which follows the Sun illumination as the body spins. Chargeddust is ever present, in the form of dusty plasma, even at high altitudes, following the solar illumination. If abody with high surface resistivity is exposed to the solar wind and solar radiation, sun-exposed areas andshadowed areas become differentially charged. The E-Glider (Electrostatic Glider) is an enabling capability foroperation at airless bodies, a solution applicable to many types of in-situ mission concepts, which leverages thenatural environment. With the E-Glider, we transform a problem (spacecraft charging) into an enablingtechnology, i.e. a new form of mobility in microgravity environments using new mechanisms and maneuveringbased on the interaction of the vehicle with the environment. Consequently, the vision of the E-Glider is toenable global scale airless body exploration with a vehicle that uses, instead of avoids, the local electricallycharged environment. This platform directly addresses the "All Access Mobility" Challenge, one of the NASA'sSpace Technology Grand Challenges. Exploration of comets, asteroids, moons and planetary bodies is limitedby mobility on those bodies. The lack of an atmosphere, the low gravity levels, and the unknown surface soilproperties pose a very difficult challenge for all forms of know locomotion at airless bodies. This E-Gliderlevitates by extending thin, charged, appendages, which are also articulated to direct the levitation force in themost convenient direction for propulsion and maneuvering. The charging is maintained through continuouscharge emission. It lands, wherever it is most convenient, by retracting the appendages or by firing a cold-gasthruster, or by deploying an anchor. The wings could be made of very thin Au-coated Mylar film, which areelectrostatically inflated, and would provide the lift due to electrostatic repulsion with the naturally chargedasteroid surface. Since the E-glider would follow the Sun's illumination, the solar panels on the vehicle wouldconstantly charge a battery. Further articulation at the root of the lateral strands or inflated membrane wings,would generate a component of lift depending on the articulation angle, hence a selective maneuveringcapability which, to all effects, would lead to electrostatic (rather than aerodynamic) flight. Preliminarycalculations indicate that a 1 kg mass can be electrostatically levitated in a microgravity field with a 2 mdiameter electrostatically inflated ribbon structure at 19kV, hence the need for a "balloon-like" system. Due tothe high density and the photo-electron sheath and associate small Debye length, significant power is requiredto levitate even a few kilograms. The power required is in the kilo-Watt range to maintain a constant chargelevel.

Electrostatic Flight↗

Increased size selectivity of Si quantum dots on SiC at low substrate temperatures: An ion-assisted self-organization approach

A simple, effective, and innovative approach based on ion-assisted self-organization is proposed to synthesize size-selected Si quantum dots (QDs) on SiC substrates at low substrate temperatures. Using hybrid numerical simulations, the formation of Si QDs through a self-organization approach is investigated by taking into account two distinct cases of Si QD formation using the ionization energy approximation theory, which considers ionized in-fluxes containing Si{sup 3+} and Si{sup 1+} ions in the presence of a microscopic nonuniform electric field induced by a variable surface bias. The results show that the highest percentage of the surface coverage by 1 and 2 nm size-selected QDs was achieved using a bias of -20 V and ions in the lowest charge state, namely, Si{sup 1+} ions in a low substrate temperature range (227-327 deg. C). As low substrate temperatures ({<=}500 deg. C) are desirable from a technological point of view, because (i) low-temperature deposition techniques are compatible with current thin-film Si-based solar cell fabrication and (ii) high processing temperatures can frequently cause damage to other components in electronic devices and destroy the tandem structure of Si QD-based third-generation solar cells, our results are highly relevant to the development of the third-generation all-Si tandem photovoltaic solar cells.

36 MATERIALS SCIENCE↗

Optimization of processing parameters on the controlled growth of ZnO nanorod arrays for the performance improvement of solid-state dye-sensitized solar cells

High-transparency and high quality ZnO nanorod arrays were grown on the ITO substrates by a two-step chemical bath deposition (CBD) method. The effects of processing parameters including reaction temperature (25-95 {sup o}C) and solution concentration (0.01-0.1 M) on the crystal growth, alignment, optical and electrical properties were systematically investigated. It has been found that these process parameters are critical for the growth, orientation and aspect ratio of the nanorod arrays, showing different structural and optical properties. Experimental results reveal that the hexagonal ZnO nanorod arrays prepared under reaction temperature of 95 {sup o}C and solution concentration of 0.03 M possess highest aspect ratio of {approx}21, and show the well-aligned orientation and optimum optical properties. Moreover the ZnO nanorod arrays based heterojunction electrodes and the solid-state dye-sensitized solar cells (SS-DSSCs) were fabricated with an improved optoelectrical performance. -- Graphical abstract: The ZnO nanorod arrays demonstrate well-alignment, high aspect ratio (L/D{approx}21) and excellent optical transmittance by low-temperature chemical bath deposition (CBD). Display Omitted Research highlights: > Investigate the processing parameters of CBD on the growth of ZnO nanorod arrays. > Optimization of CBD process parameters: 0.03 M solution concentration and reaction temperature of 95 {sup o}C. > The prepared ZnO samples possess well-alignment and high aspect ratio (L/D{approx}21). > An n-ZnO/p-NiO heterojunction: great rectifying behavior and low leakage current. > SS-DSSC has J{sub SC} of 0.31 mA/cm{sup 2} and V{sub OC} of 590 mV, and an improved {eta} of 0.059%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalogue of UBVRI photometry of T Tauri stars and analysis of the causes of their variability

A computer-based catalogue of UBVRI photoelectric photometry of T Tauri stars and their earlier type analogs has been compiled. It presently includes over 10 000 entries on 80 stars and will be updated on a regular basis; it is available on Internet. The catalogue is used to analyze the sometimes bizarre light variations of pre-main-sequence stars on time scales of days to months in an attempt to illuminate the nature and causes of the phenomenon. It is useful in discussing their light variations to divide the stars into three groups according to their spectra. These are: weak T Tauri stars (WTTS; spectral class later than K0 and W(sub H-alpha less than 10 A), classical T Tauri stars (CTTS; spectral class later than K0 and W(sub H-alpha) greater than 10 A), and early type T Tauri stars (ETTS; spectral class of K0 or earlier). Three distinct types of variability are displayed by stars in the catalogue. Type I variations are periodic in VRI and undoubtedly caused by rotational modulation of a star with an asymmetric distribution of cool spots on its surface. Irregular flare activity is sometimes seen on such stars in U and B. Type I variations are easiest to see on WTTS but are clearly present on CTTS and ETTS as well. Type II variations are caused by hot 'spots' or zones and, it is argued, result from changes in the excess or 'veiling' continuum commonly attributed to an accretion boundary layer or impact zone of a magnetically channeled accretion flow. This type of variation is seen predominantly or solely in CTTS. A subcategory, designated Type IIp, consists of stars which display periodic variations caused by hot spots. Whereas cool spots may last for hundreds or thousands of rotations, hot spots appear to come and go on a much shorter time scale. This suggests that both unsteady accretion and rotation of the star contribute to Type II variations. It is shown that a third type of variation exists among ETTS, including stars as early as A type. UX Ori is a typical example and we call these Type III variables or UXors. Their distinguishing characteristic is that they can display very large amplitudes (exceeding 2.8 mag in V) while showing little or no evidence for a veiling continuum or any substantial change in their photospheric spectra. If Type III variations are caused by changes in accretion luminosity, then boundary layers or impact zones in ETTS must be much different from CTTS which, of course, is possible since mass accretion rates are probably much higher. However, the leading hypothesis for explaining Type III variations is variable obscuration by circumstellar dust. It is argued that the putative dust clumps causing such variations cannot be confined to a disk; otherwise UXors would be rare. Perhaps magnetic effects are involved in levitating accreting dust out of the plane, as has been suggested for CTTS, or perhaps we are witnessing continuing infall of clumps from placental clouds. A third possibility is that dust may be condensing in an outflow.

Herbst, William↗

Electrical and photovoltaic properties of CdTe/ZnTe n-i-p junctions grown by molecular beam epitaxy

Preliminary studies have been performed on photoelectrical properties of CdTe/ZnTe n-i-p junctions grown using the molecular beam epitaxy technique. Photovoltaic properties of the cells have been investigated by the measurements of current-voltage (I-V) characteristics under 1-sun illumination. I-V characteristics yield efficiencies of the cells varying from 3.4% to 4.9%. The low efficiency can be due to the presence of electrically active defects. In order to study the origin of defects in CdTe/ZnTe photovoltaic junctions, space charge techniques (C-V and deep level transient spectroscopy (DLTS)) have been applied. From the C-V measurements, a doping profile was calculated confirming charge accumulation in the i-CdTe layer. The results of the DLTS studies revealed the presence of four traps within a temperature range from 77–420 K. Three of them with activation energies equal to 0.22 eV, 0.45 eV, and 0.78 eV have been ascribed to the hole traps present in the i-CdTe material and their possible origin has been discussed. The fourth, high-temperature DLTS peak observed at ∼350 K has been attributed to extended defects as its amplitude and temperature position depends on the value of the filling pulse width. It is assumed that the defects related to the trap are either located in the i-CdTe layer or at the i-CdTe/ZnTe interface. However, it was found that the trap exhibits twofold nature: it behaves as a majority or as a minority trap, depending on the filling pulse height, which is a characteristic feature of recombination centers. This trap is presumably responsible for the low efficiency of the cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗