SEARCH · Search NASA

Results for “Power conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

DOE OSTI2018

A Highly Crystalline Fused‐Ring n‐Type Small Molecule for Non‐Fullerene Acceptor Based Organic Solar Cells and Field‐Effect Transistors

Abstract N‐type organic small molecules (SMs) are attracting attention in the organic electronics field, due to their easy purification procedures with high yield. However, only a few reports show SMs that perform well in both organic field‐effect transistors (OFETs) and organic solar cells (OSCs). Here, the synthesis and characterization of an n‐type small molecule with an indacenodithieno[3,2‐b]thiophene (IDTT) core unit and linear alkylated side chain (C 16 ) (IDTTIC) are reported. Compared to the state‐of‐the‐art n‐type molecule IDTIC, IDTTIC exhibits smaller optical bandgap and higher absorption coefficient, which is due to the enhanced intramolecular effect. After mixing with the polymer donor PBDB‐T, IDTIC‐based solar cells deliver a power conversion efficiency of only 5.67%. In stark contrast, the OSC performance of IDTTIC improves significantly to 11.2%. It is found that the superior photovoltaic properties of PBDB‐T:IDTTIC blends are mainly due to reduced trap‐assisted recombination and enhanced molecular packing coherence length and higher domain purity when compared to IDTIC. Moreover, a significantly higher electron mobility of 0.50 cm 2 V −1 s −1 for IDTTIC in OFET devices than for IDTIC (0.15 cm 2 V −1 s −1 ) is obtained. These superior performances in OSCs and OFETs demonstrate that SMs with extended π‐conjugation of the backbone possess a great potential for application in organic electronic devices.

Song, Xin↗

DOE OSTI2019

Effects of Short‐Axis Alkoxy Substituents on Molecular Self‐Assembly and Photovoltaic Performance of Indacenodithiophene‐Based Acceptors

Abstract The effects of central alkoxy side chain length of a series of narrow bandgap small molecule acceptors (SMAs) on their physicochemical properties and on the photovoltaic performance of the SMA‐based polymer solar cells (PSCs) are systematically investigated. It is found that the ordered aggregation of these SMAs in films is enhanced gradually with the increase of alkoxy chain length. The single‐crystal structures of these SMAs further reveal that small changes in the side chain length can have a dramatic impact on molecular self‐assembly. The short‐circuit current density and power conversion efficiency values of the corresponding PSCs increase with the increase of the side chain length of the SMAs. The π–π coherence length of the SMAs in the active layers is increased with the increase of the side chain length, which could be the reason for the increase of the J sc in the PSCs. The results indicate that small changes in side chain length can have a dramatic impact on the molecular self‐assembly, morphology, and photovoltaic performance of the PSCs. The structure–performance relationship established in this study can provide important instructions for the side chain engineering and for the design of efficient SMAs materials.

Li, Xiaojun↗

DOE OSTI2020

Fibril Network Strategy Enables High‐Performance Semitransparent Organic Solar Cells

Abstract The development of semitransparent organic solar cells (ST‐OSCs) represents a significant step toward the commercialization of OSCs. However, the trade‐off between power conversion efficiency (PCE) and average visible transmittance (AVT) restricts further improvements of ST‐OSCs. Herein, it is demonstrated that a fibril network strategy can enable ST‐OSCs with a high PCE and AVT simultaneously. A wide‐bandgap polymer PBT1‐C‐2Cl that can self‐assemble into a fibril nanostructure is used as the donor and a near‐infrared small molecule Y6 is adopted as the acceptor. It is found that a tiny amount of PBT1‐C‐2Cl in the blend can form a high speed pathway for hole transport due to the well distributed fibril nanostructure, which increases the transmittance in the visible region. Meanwhile, the acceptor Y6 guarantees sufficient light absorption. Using this strategy, the optimized ST‐OSCs yield a high PCE of 9.1% with an AVT of over 40% and significant light utilization efficiency of 3.65% at donor/acceptor ratio of 0.25:1. This work demonstrates a simple and effective approach to realizing high PCE and AVT of ST‐OSCs simultaneously.

Xie, Yuanpeng↗

DOE OSTI2022

Effect of the Selective Halogenation of Small Molecule Acceptors on the Blend Morphology and Voltage Loss of High-Performance Solar Cells

Herein, the impacts of the selective halogenation at two different positions of dicyanomethylene-3-indanone (IC) end groups and inner side chains of small molecular acceptors (SMAs) on the P D :SMA interfacial interactions, blend morphology, and resulting photovoltaic properties are described. In this study, four different SMAs (A1, A2, A3, and A4) with the same molecular backbone, but with different degrees of halogenation, are synthesized. The IC end groups on the backbones of the A1 and A3, and A2 and A4 SMAs are chlorinated and fluorinated, respectively; in addition, 6-phenoxyhexyl inner side chains of the A3 and A4 are chlorinated. The SMAs are paired with a chlorinated PBDT-Cl PD to construct organic solar cells (OSCs). The PBDT-Cl:A4-based OSC exhibits the highest power conversion efficiency of 17.2%, outperforming the PBDT-Cl:A1-(13.3%), PBDT-Cl:A2-(15.6%), and PBDT-Cl:A3-based OSC (16.5%). The Cl atoms on the side chains in the A3 and A4 SMAs enhance the molecular/energetic interactions at the P D :SMA interfaces and improve the blend morphology in terms of domain purity and spacing. These effects lead to the improved fill factors and reduced voltage loss of the PBDT-Cl:A3- and PBDT-Cl:A4-based OSCs. This study demonstrates the importance of appropriate halogenation of SMAs in optimizing the blend morphology, reducing voltage loss, and improving OSC performance.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Targeted Adjusting Molecular Arrangement in Organic Solar Cells via a Universal Solid Additive

The incorporation of solid additive has been considered as an effective strategy for developing organic photovoltaics with multi-components, which is independent of dynamics, playing unique roles in morphology adjustment. However, their complex working mechanisms involving specific chemical structures are selective to material systems, hence limiting their university and flexibility in application. Herein, an inert small-molecular compound naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole (NT) is introduced into the bulk-heterojunction blend as the solid additive, which can function with various material systems and solvents, depending on its simple π-conjugated structure and S⋯N interaction for adjusting molecular alignment. It is interesting to note that the introduced NT can not only improve device performance, but also simplify complicated pre- or post-processing methods, reduce impact from batch-to-batch differences, construct sufficient energy transfer channel as well as improve device stability. The resulting devices based on PTzBI-dF:Y6-BO system show an impressive power conversion efficiency of 17.4% with obviously enhanced T 80 lifetime of >1200 h. These findings provide useful guidelines for exploring potential universal solid additives benefitting toward commercial application.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Tradeoff between Intermolecular Interaction and Backbone Disorder by High Molecular Dipole Block for Improving Blend Morphology of Polymer Solar Cells

Constructing terpolymer has attracted increasing attention as a strategy to improve the performance of polymer solar cell. Terpolymer usually offers an opportunity to lower the frontier molecular orbital energy level, introduces additional absorption band and sometimes optimizes the morphology of the active blend. Generally, the additional segment in terpolymer backbone inevitably introduces backbone disorder, which causes entropy rises. However, selecting a suitable dipole unit introduces extra driving forces for crystallization by enhancing intermolecular interactions. This provides a handy knob for tradeoff between intermolecular interaction and backbone disorder, thus regulating the blend morphology. In this study, a high dipole and electron-deficient group of pyrrolo[3,4-f ]benzotriazole-5,7(6H)-dione (TzBI) is incorporated into the high-performance donor polymer and a series of terpolymers with different content of TzBI are designed. As expected, the morphology is optimized gradually for improving charge generation and charge transport, also suppressing charge recombination. The champion device with 10% TzBI exhibited a power conversion efficiency (PCE) of 18.36%, which is 5% increase compared to the controlled device. This study presents a charming terpolymer strategy by highly electron-deficient and high dipole segment to realize a tradeoff between intermolecular interaction and backbone disorder, facilitating the optimization of morphology and elevation of fill factor and device efficiency.

36 MATERIALS SCIENCE↗

DOE OSTI2022

High‐Performance Green Thick‐Film Ternary Organic Solar Cells Enabled by Crystallinity Regulation

Abstract The power conversion efficiency (PCE) of organic solar cells (OSCs) has reached high values of over 19%. However, most of the high‐efficiency OSCs are fabricated by spin‐coating with toxic solvents and the optimal photoactive layer thickness is limited to 100 nm, limiting practical development of OSCs. It is a great challenge to obtain ideal morphology for high‐efficiency thick‐film OSCs when using non‐halogenated solvents due to the unfavorable film formation kinetics. Herein, high‐efficiency ternary thick‐film (300 nm) OSCs with PCE of 15.4% based on PM6:BTR‐Cl:CH1007 are fabricated by hot slot‐die coating using non‐halogenated solvent (o‐xylene) in the air. Compared to PM6:BTR‐Cl:Y6 blends, the stronger pre‐aggregation of CH1007 in solution induces the earlier aggregation of CH1007 molecules and longer aggregation time, and thus results in high and balanced crystallinity of donors and acceptor in CH1007‐based ternary film, which led to high‐carrier mobility and suppressed charge recombination. The ternary strategy is further used to fabricate high‐efficiency, thick‐film, large‐area, and flexible devices processed from non‐halogenated solvents, paving the way for industrial development of OSCs.

Chemistry↗

DOE OSTI2023

Solid Solvation Assisted Electrical Doping Conserves High‐Performance in 500 nm Active Layer Organic Solar Cells

Abstract Organic solar cells (OSCs) process fascinating solution‐printing capability to achieve low‐cost and large‐scale manufacture. However, the rapid power conversion efficiency (PCE) decay with active layer thickness enlargement inhibits the implement of OSCs’ potential advantages. To overcome the bottlenecks of PCE decay in thick active layer OSCs, the electrical doping with componential selectivity in bulk heterojunction (BHJ) film is achieved by introducing a solid solvation additive. Benefiting from the higher exciton splitting efficiency together with the longer drift (L dr ) and diffusion (L diff ) lengths, an OSC with 100 nm BHJ film demonstrates a PCE increment from 16.44% to 18.24% with prolonged dark and illuminated storage stabilities. Applying the solid solvation assisted (SSA) doping method in the OSCs with 500 nm active layer, the PCE significantly increases by 31.9%, from the original value of 11.79% to 15.55%. It further improves to 15.84% in a ternary blend thick‐film device, which is the record value to the best of our knowledge. Besides, the SSA doping narrows the PCE gap between the 0.04 and 1 cm 2 devices. All improvements demonstrate the great potential of SSA doping for OSC commercial manufacture, since it optimizes the photovoltaic performance under all practical conditions of long‐term, thick‐film, and large‐area.

Chemistry↗

DOE OSTI2024

Design Principles of Diketopyrrolopyrrole‐Thienopyrrolodione Acceptor 1 –Acceptor 2 Copolymers

Abstract The design principles of acceptor 1 –acceptor 2 copolymers featuring alternating diketopyrrolopyrrole (DPP) and thienopyrrolodione (TPD) moieties are investigated. The investigated series of polymers is obtained by varying the aromatic linker between the two acceptor motifs between thiophene, thiazole, pyridine, and benzene. High electron affinities between 3.96 and 4.42 eV, facilitated by the synergy of the acceptor motifs are determined with optical gaps between 1.37 and 2.02 eV. Grazing incidence wide‐angle X‐ray scattering studies reveal a range of film morphologies after thermal annealing, including face‐on, end‐on and superstructure edge‐on‐like crystallites. Conversely, all materials form thin edge‐on layers on the polymer–air interface, as demonstrated by multi‐elemental near‐edge X‐ray absorption fine‐structure spectroscopy. The benefit of the electron‐deficient linkers thiazole and pyridine is evident: In organic field effect transistors, electron mobilities of up to 4.6 × 10 −2 cm 2 V −1 s −1 are obtained with outstanding on/off current ratios of 5 × 10 5 , facilitated by the absence of detectable hole transport in these materials. Viability for all‐polymer solar cells is assessed in active layer blends with the donor polymer PM6, yielding a maximum average power conversion efficiency of 4.8% and an open circuit voltage above 1 V.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Impact of Linker Engineering in Core‐Linked Dimeric Acceptors for High‐Performance Organic Solar Cells

Abstract The dimerization of small molecule acceptors (SMAs) is a promising strategy for enhancing the long‐term stability and power conversion efficiency (PCE) of organic solar cells (OSCs). However, the reported DSMAs are primarily limited to end‐linked molecular configurations, highlighting the need for further exploration of various dimer architectures. Herein, the development of two distinct core‐linked dimerized SMAs (DYF‐V and DYF‐E) are reported with tailored linker structures (vinylene and ethynyl, respectively), achieving high‐performance OSCs (PCE = 18.53%). Interestingly, a subtle change in the linker structures results in markedly different molecular properties and photovoltaic performances of the dimer acceptors. DYF‐E with an ethynyl linker exhibits more twisted backbone conformation and mitigated aggregation property compared to DYF‐V, inducing desirable blend morphologies with a polymer donor including high crystallinity, face‐on oriented packing structures, and well‐intermixed domains. Thus, the DYF‐E‐based OSCs exhibit a high PCE (17.02%), which significantly outperforms the DYF‐V‐based OSCs (PCE = 9.98%). Furthermore, the ternary OSCs based on DYF‐E achieve a higher PCE of 18.53%. Thus, this study highlights the significance of selecting an appropriate linker in core‐linked dimerized SMAs for producing high‐performance OSCs.

Oh, Shinbee↗

DOE OSTI2024

Effect of Molecular Conformation on Intermolecular Interactions and Photovoltaic Performances of Giant Molecule Acceptors

The molecular conformation of giant molecule acceptors (GMAs) plays a significant role in regulating the intermolecular interactions and their photovoltaic performances in organic solar cells (OSCs). For the linear GMA GT‐l, the stronger homo‐molecular interaction causes its aggregation being weakly affected by the donor, thus forming an ordered molecular stacking and proper phase separation in its blend film. The star‐shaped GMA GT‐s‐based blend film shows a dominant hetero‐molecular interaction that suppresses the aggregation of the donor and acceptor, resulting in smaller phase separation and more uniform vertical phase distribution. While for another star‐shaped GMA GTs, the weakest hetero‐molecular interaction causes its blend film to form larger phase separation. Therefore, the GT‐l based OSC with PM6 as donor shows the highest charge mobilities, the fastest charge transfer (CT) process, reduced energy loss and less charge recombination, contributing to a higher power conversion efficiency (PCE) of 19.03%. Comparatively, the PCEs of the OSCs based on GTs and GT‐s are 18.05% and 17.58% respectively. Notably, all the three GMAs based OSCs show excellent thermal stability and long‐term storage stability. This study provides a facile strategy by tuning the linking unit and its connecting mode for designing highly efficient and stable organic photovoltaic materials.

Chemistry↗

DOE OSTI2026

Temperature‐Dependent Crystallization in Two‐Step Perovskite Deposition Revealed by In Situ GIWAXS and Machine Learning‐Guided Analysis

The performance and stability of perovskite solar cells are strongly governed by the crystallization behavior of their active layer. In two-step sequential deposition, early-stage film formation plays a decisive role in determining final phase purity and device quality. Guided by a data-driven analysis of nearly 39 000 devices in the FAIR perovskite database, we identified solvent-mediated quenching and thermal processing as key variables affecting power conversion efficiency (PCE), particularly in two-step fabrication. Here, to investigate these effects in real time, we designed and implemented a custom-built, temperature-controlled spin-coating system, enabling precise thermal modulation during precursor deposition. Using this platform, we performed in situ GIWAXS measurements to study the crystallization dynamics of FA 0.5 MA 0.5 PbI 3 films over a temperature range of 30°C–90°C. Our results reveal a non-monotonic relationship between spin-coating temperature and α-phase formation, governed by the interplay between precursor interdiffusion, PbI 2 crystallinity, and δ-phase suppression. The custom thermal control enabled us to isolate and quantify these competing effects during the earliest stages of film formation, providing mechanistic insight into how spin-coating temperature governs both phase purity and kinetic pathways in two-step perovskite systems. Temperature-dependent SEM and photovoltaic device measurements further demonstrate that early-stage crystallization pathways directly translate into differences in morphology, charge-transport continuity, and device performance. These findings inform targeted strategies for optimizing deposition protocols to balance rapid nucleation, phase stability, and device performance.

Saadawy, Ahmed [King Fahd University of Petroleum ↗

DOE OSTI2019

From Lead Halide Perovskites to Lead‐Free Metal Halide Perovskites and Perovskite Derivatives

Abstract Despite the exciting progress on power conversion efficiencies, the commercialization of the emerging lead (Pb) halide perovskite solar cell technology still faces significant challenges, one of which is the inclusion of toxic Pb. Searching for Pb‐free perovskite solar cell absorbers is currently an attractive research direction. The approaches used for and the consequences of Pb replacement are reviewed herein. Reviews on the theoretical understanding of the electronic, optical, and defect properties of Pb and Pb‐free halide perovskites and perovskite derivatives are provided, as well as the experimental results available in the literature. The theoretical understanding explains well why Pb halide perovskites exhibit superior photovoltaic properties, but Pb‐free perovskites and perovskite derivatives do not.

Xiao, Zewen↗

DOE OSTI2018

Achieving Balanced Crystallinity of Donor and Acceptor by Combining Blade‐Coating and Ternary Strategies in Organic Solar Cells

Abstract As a prototype tool for slot‐die coating, blade‐coating exhibits excellent compatibility with large‐area roll‐to‐roll coating. A ternary organic solar cell based on PBDB‐T:PTB7‐Th:FOIC blends is fabricated by blade‐coating and exhibits a power conversion efficiency of 12.02%, which is one of the highest values for the printed organic solar cells in ambient environment. It is demonstrated that blade‐coating can enhance crystallization of these three materials, but the degree of induction is different (FOIC > PBDB‐T > PTB7‐Th). Thus, the blade‐coated PBDB‐T:FOIC device presents much higher electron mobility than hole mobility due to the very high crystallinity of FOIC. Upon the addition of PTB7‐Th into the blade‐coated PBDB‐T:FOIC blends, the crystallinity of FOIC decreases together with the corresponding electron mobility, due to the better miscibility between PTB7‐Th and FOIC. The ternary strategy not only maintains the well‐matched crystallinity and mobilities, but also increases the photocurrent with complementary light absorption as well as the Förster resonant energy transfer. Furthermore, small domains with homogeneously distributed nanofibers are observed in favor of the exciton dissociation and charge transport. This combination of blade‐coating and ternary strategies exhibits excellent synergistic effect in optimizing morphology, showing great potential in the large‐area fabrication of highly efficient organic solar cells.

Zhang, Lin↗

DOE OSTI2019

In Situ Back‐Contact Passivation Improves Photovoltage and Fill Factor in Perovskite Solar Cells

Abstract Organic–inorganic hybrid perovskite solar cells (PSCs) have seen a rapid rise in power conversion efficiencies in recent years; however, they still suffer from interfacial recombination and charge extraction losses at interfaces between the perovskite absorber and the charge–transport layers. Here, in situ back‐contact passivation (BCP) that reduces interfacial and extraction losses between the perovskite absorber and the hole transport layer (HTL) is reported. A thin layer of nondoped semiconducting polymer at the perovskite/HTL interface is introduced and it is shown that the use of the semiconductor polymer permits—in contrast with previously studied insulator‐based passivants—the use of a relatively thick passivating layer. It is shown that a flat‐band alignment between the perovskite and polymer passivation layers achieves a high photovoltage and fill factor: the resultant BCP enables a photovoltage of 1.15 V and a fill factor of 83% in 1.53 eV bandgap PSCs, leading to an efficiency of 21.6% in planar solar cells.

Tan, Furui↗

DOE OSTI2020

Choose Your Own Adventure: Fabrication of Monolithic All-Perovskite Tandem Photovoltaics

Metal halide perovskites (MHPs) have transfixed the photovoltaic (PV) community due to their outstanding and tunable optoelectronic properties coupled to demonstrations of high-power conversion efficiencies (PCE) at a range of bandgaps. This has motivated the field to push perovskites to reach the highest possible performance. One way to increase the efficiency is by fabricating multijunction solar cells, which can split the solar spectrum, reducing thermalization loss. Low-cost all-perovskite tandems have a real chance to soon exceed 30% PCE, which could transform the PV industry. Achieving this goal requires the identification of perovskite sub-cells that are both highly efficient and can be effectively integrated. In this review, it is discussed how to navigate the multiple-choice adventure in choosing between the myriad of options and considerations present when deciding what perovskite materials, contact layers, and processing tools to use. Some of the potential fabrication pitfalls often encountered in MHP based tandem PVs are highlighted, so that they can hopefully be avoided in the future.

14 SOLAR ENERGY↗

DOE OSTI2020

The Role of Demixing and Crystallization Kinetics on the Stability of Non‐Fullerene Organic Solar Cells

Abstract With power conversion efficiency now over 17%, a long operational lifetime is essential for the successful application of organic solar cells. However, most non‐fullerene acceptors can crystallize and destroy devices, yet the fundamental underlying thermodynamic and kinetic aspects of acceptor crystallization have received limited attention. Here, room‐temperature (RT) diffusion coefficients of 3.4 × 10 −23 and 2.0 × 10 −22 are measured for ITIC‐2Cl and ITIC‐2F, two state‐of‐the‐art non‐fullerene acceptors. The low coefficients are enough to provide for kinetic stabilization of the morphology against demixing at RT. Additionally profound differences in crystallization characteristics are discovered between ITIC‐2F and ITIC‐2Cl. The differences as observed by secondary‐ion mass spectrometry, differential scanning calorimetry (DSC), grazing‐incidence wide‐angle X‐ray scattering, and microscopy can be related directly to device degradation and are attributed to the significantly different nucleation and growth rates, with a difference in the growth rate of a factor of 12 at RT. ITIC‐4F and ITIC‐4Cl exhibit similar characteristics. The results reveal the importance of diffusion coefficients and melting enthalpies in controlling the growth rates, and that differences in halogenation can drastically change crystallization kinetics and device stability. It is furthermore delineated how low nucleation density and large growth rates can be inferred from DSC and microscopy experiments which could be used to guide molecular design for stability.

Hu, Huawei↗

DOE OSTI2020

Thermodynamic Properties and Molecular Packing Explain Performance and Processing Procedures of Three D18:NFA Organic Solar Cells

Abstract Organic solar cells (OSCs) based on D18:Y6 have recently exhibited a record power conversion efficiency of over 18%. The initial work is extended and the device performance of D18‐based OSCs is compared with three non‐fullerene acceptors, Y6, IT‐4F, and IEICO‐4Cl, and their molecular packing characteristics and miscibility are studied. The D18 polymer shows unusually strong chain extension and excellent backbone ordering in all films, which likely contributes to the excellent hole‐transporting properties. Thermodynamic characterization indicates a room‐temperature miscibility for D18:Y6 and D18:IT‐4F near the percolation threshold. This corresponds to an ideal quench depth and explains the use of solvent vapor annealing rather than thermal annealing. In contrast, D18:IEICO‐4Cl is a low‐miscibility system with a deep quench depth during casting and poor morphology control and low performance. A failure of ternary blends with PC 71 BM is likely due to the near‐ideal miscibility of Y6 to begin with and indicates that strategies for developing successful ternary or quaternary solar cells are likely very different for D18 than for other high‐performing donors. This work reveals several unique property–performance relations of D18‐based photovoltaic devices and helps guide design or fabrication of yet higher efficiency OSCs.

Wang, Zhen↗