Search NASA⌕ Search

SEARCH · Search NASA

Results for “RAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

The ambiguous AT2022rze: changing-look AGN mimicking a supernova in a merging galaxy system

AT2022rze is a luminous, ambiguous transient located south-east of the geometric centre of its host galaxy at redshift $z = 0.08$. The host appears to be formed by a merging galaxy system. The observed characteristics of AT2022rze are reminiscent of active galactic nuclei (AGNs), tidal disruption events, and superluminous supernovae. The transient reached a peak absolute magnitude of $-$20.2 $\pm$ 0.2 mag, showing a sharp rise (t$_{\mathrm{rise,1/e}} = 27.5 \pm 0.6$ d) followed by a slow decline (t$_{\mathrm{dec,1/e}} = 382.9 \pm 0.6$). Its bumpy light curve and narrow Balmer lines indicate the presence of gas (and dust). Its light curve shows rather red colours, indicating that the transient could be affected by significant host extinction. The spectra reveal coronal lines, indicative of high-energy (X-ray/UV) emission. Archival data reveal no prior activity at this location, disfavouring a steady-state AGN, although an optical spectrum obtained prior to the transient is consistent with an AGN classification of the host. Based on this, we conclude that the transient most likely represents a changing-look AGN at the centre of the smallest component of the merging system.

galaxies: active↗

Normalized Solar-Induced Fluorescence Responds Earlier Than Vegetation Indices to the 2019 North China Plain Drought

Recently, solar-induced chlorophyll fluorescence (SIF) from satellites has shown potential for evaluating vegetation status and stress responses. Fluorescence quantum yield ($Φ_F$) is essentially linked to vegetation stress. However, the complex physiological and structural responses of SIF and $Φ_F$ to drought need further study. This study normalized SIF as SIFn to account for angular variations and fluctuations in photosynthetically active radiation (PAR), aiming for more accurate drought monitoring. SIFn anomalies were compared to historical baselines (2019–2021 averages) of vegetation indices (VIs), raw SIF, and $Φ_F$ during a 2019 drought in the North China Plain (NCP). Here, the results show SIFn provides an effective method for drought monitoring, showing the earliest decline compared to raw SIF, VIs, and $Φ_F$. In the first two weeks of drought, SIFn decreased by 8.2%, 7.0%, 12.5%, and 8.2% across the four NCP subdivisions. SIFn outperformed other indicators, proving sensitive to early drought detection. SIFn was also examined for tracking drought alleviation by rainfall. The uncertainty under different viewing geometries was quantified. SIFn anomalies showed a strong correlation with rainfall anomalies (R: 0.45 ~ 0.52) and meteorological factors like PAR (R: 0.80 ~ 0.84) and relative humidity (R:0.52 ~ 0.54). The correlation of near-infrared reflectance (NIRv) and $Φ_F$ anomalies with SIF was weak during drought onset (R: 0.16 ~ 0.32) but strong at the end (R: 0.83 ~ 0.87). These suggest both canopy structure (mainly characterized by NIRv) and vegetation chlorophyll ($Φ_F$) are impacted by drought and influence SIF at different stages.

54 ENVIRONMENTAL SCIENCES↗

Forced Component Estimation Statistical Method Intercomparison Project (ForceSMIP)

Anthropogenic climate change is unfolding rapidly, yet its regional manifestation can be obscured by internal variability. A primary goal of climate science is to identify the externally forced climate response from among the noise of internal variability. Separating the forced response from internal variability can be addressed in climate models by using a large ensemble to average over different possible realizations of internal variability. However, with only one realization of the real world, it is a major challenge to isolate the forced response directly in observations. In the Forced Component Estimation Statistical Method Intercomparison Project (ForceSMIP), contributors used existing and newly developed statistical and machine learning methods to estimate the forced response over 1950–2022 within individual realizations of the climate system. Participants used neural networks, linear inverse models, fingerprinting methods, and low-frequency component analysis, among other approaches. These methods were trained using large ensembles from multiple climate models and then applied to observations. Here, we evaluate method performance within large ensembles and investigate the estimates of the forced response in observations. Our results show that many different types of methods are skillful for estimating the forced response in climate models, though the relative skill of individual methods varies depending on the variable and evaluation metric. Methods with comparable skill in models can give a wide range of estimates of the forced response pattern in observations, illustrating the epistemic uncertainty in forced response estimates. ForceSMIP gives new insights into the forced response in observations, its uncertainty, and methods for its estimation.

Climate attribution↗

Chapter 14: Electron Microscopy on Thin Films for Solar Cells

This chapter overviews the various techniques applied in scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and highlights their possibilities and also limitations. It gives the various imaging and analysis techniques applied on a scanning electron microscope. The chapter shows that imaging is divided into that making use of secondary electrons (SEs) and of backscattered electrons (BSEs), resulting in different contrasts in the images and thus providing information on compositions, microstructures, and surface potentials. Whenever aiming for imaging and analyses at scales of down to the angstroms range, TEM and its related techniques are appropriate tools. In many cases, also SEM techniques provide the access to various material properties of the individual layers, not requiring specimen preparation as time consuming as TEM techniques. Finally, the chapter dedicates to cross-sectional specimen preparation for electron microscopy. The preparation decides indeed on the quality of imaging and analyses.

14 SOLAR ENERGY↗

Minimizing Interfacial Recombination in 1.8 eV Triple‐Halide Perovskites for 27.5% Efficient All‐Perovskite Tandems

Abstract All‐perovskite tandem solar cells show great potential to enable the highest performance at reasonable costs for a viable market entry in the near future. In particular, wide‐bandgap (WBG) perovskites with higher open‐circuit voltage ( V OC ) are essential to further improve the tandem solar cells’ performance. Here, a new 1.8 eV bandgap triple‐halide perovskite composition in conjunction with a piperazinium iodide (PI) surface treatment is developed. With structural analysis, it is found that the PI modifies the surface through a reduction of excess lead iodide in the perovskite and additionally penetrates the bulk. Constant light‐induced magneto‐transport measurements are applied to separately resolve charge carrier properties of electrons and holes. These measurements reveal a reduced deep trap state density, and improved steady‐state carrier lifetime (factor 2.6) and diffusion lengths (factor 1.6). As a result, WBG PSCs achieve 1.36 V V OC , reaching 90% of the radiative limit. Combined with a 1.26 eV narrow bandgap (NBG) perovskite with a rubidium iodide additive, this enables a tandem cell with a certified scan efficiency of 27.5%.

14 SOLAR ENERGY↗

No Evidence for Passivation Effects of Na and K at Grain Boundaries in Polycrystalline Cu(In,Ga)Se2 Thin Films for Solar Cells

Thin-film solar cells based on Cu(In,Ga)Se2 (CIGSe) absorber layers reach conversion efficiencies of above 20%. One key to this success is the incorporation of alkali metals, such as Na and K, into the surface and the volume of the CIGSe thin film. The present work discusses the impact of Na and K on the grain-boundary (GB) properties in CIGSe thin films, i.e., on the barriers for charge carriers, ..phi..b, and on the recombination velocities at the GBs, sGB. First, the physics connected with these two quantities as well as their impact on the device performance are revised, and then the values for the barrier heights and recombination velocities are provided from the literature. The sGB values are measured by means of a cathodoluminescence analysis of Na-/K-free CIGSe layers as well as on CIGSe layers on Mo/sapphire substrates, which are submitted to only NaF or only KF postdeposition treatments. Overall, passivating effects on GBs by neither Na nor K can be confirmed. The GB recombination velocities seem to remain on the same order of magnitude, in average about 10^3-10^4 cm s^-1, irrespective of whether CIGSe thin films are Na-/K-free or Na-/K-containing.

14 SOLAR ENERGY↗

Measurement of the phase between strong and electromagnetic amplitudes in the decay J/ψ → ϕη

The first direct measurement of the relative phase between the strong and electromagnetic amplitudes for a J/ψ decaying into a vector-pseudoscalar final state is performed using 26 energy points of e + e − annihilation data between 3.00 GeV and 3.12 GeV. The data sets were collected by the BESIII detector with a total integrated luminosity of 452 pb −1 . By investigating the interference pattern in the cross section lineshape of e + e − → ϕη, the relative phase between the strong and electromagnetic amplitudes of J/ψ decay is determined to be within [133°, 228°] at 68% confidence level.

QCD↗

O 2 -Dependence of reactions of 1,2-dimethoxyethanyl and 1,2-dimethoxyethanylperoxy isomers

Reaction mechanisms of Ṙ and ROȮ radicals derived from low-temperature oxidation of 1,2-dimethoxyethane (CH 3 O(CH 2 ) 2 OCH 3 ) were investigated using speciation from multiplexed photoionization mass spectrometry (MPIMS) measurements via Cl-initiated oxidation, in conjunction with electronic structure calculations. The experiments were conducted at 5 bar, from 450 K – 650 K, and O 2 concentrations from 1 · 10 14 cm –3 – 6 · 10 18 cm –3 to probe the effects on competing reaction channels of 1,2-dimethoxyethanyl (Ṙ) and 1,2-dimethoxyethanylperoxy (ROȮ) isomers. Several species were detected with photoionization spectral fitting – ethene, formaldehyde, methyl vinyl ether, and 2-methoxyacetaldehyde – and, as determined by electronic structure calculations, may form via unimolecular decomposition of 1,2-dimethoxyethanyl or 1,2-dimethoxyethanylperoxy. O 2 -dependent yield ratios show that the formation pathways for all species undergo a competition between O 2 -addition and unimolecular decomposition. Here, adiabatic ionization energies were also calculated and utilized along with exact mass determinations to infer contributions for other species derived exclusively from first- and second-O 2 -addition, including 1,2-dimethoxyethene, cyclic ethers, and dicarbonyls.

1,2-dimethoxyethane↗

Effects of carbon substitution on magnetic properties and magnetocaloric effects in Mn 65-x Ga 17 C 18+x compounds

This study involved the tuning of the magnetic, magnetocaloric, and room-temperature structural properties of Mn 65-x Ga 17 C 18+x (0 ≤ x ≤ 4) compounds prepared using a high-energy ball milling (HEBM) technique. This study indicates that the crystal structure of all the compounds can be described as an anti-perovskite cubic structure with the Pm-3m space group and the crystal cell volume decreases with increasing carbon concentration. The system shows a first-order structural phase transition at a temperature T=T M between two cubic phases having different magnetic structures. The phases are characterized by antiferromagnetic (AFM) and ferromagnetic (FM) -like behavior at low (T < T M ) and high (T M > T) temperature regions, respectively. A suppression of the AFM phase was observed with increasing C concentration. The temperature-induced first-order transitions (FOTs) were found to possess a small thermal hysteresis in the magnetization (~2-3 K) in an applied magnetic field of H = 50 kOe. Magnetic entropy changes estimated from isothermal magnetization curves indicate that the largest value of the magnetic entropy change of |ΔS M | = 2.1 J kg -1 K -1 for x = 4 with ΔH = 50 kOe, with a relative cooling power (RCP) of ~190 J kg -1 . Furthermore, high-energy ball milling (HEBM), a scalable technique, has been demonstrated as a viable method to synthesize magnetocaloric materials with substantial RCP values.

36 MATERIALS SCIENCE↗

Bimetallic NiCo boride nanoparticles confined in a MXene network enable efficient ambient ammonia electrosynthesis

Ambient electrocatalytic nitrogen fixation is an emerging technology for green ammonia synthesis, but the absence of optimized, stable and performant catalysts can render its practical application challenging. Herein, bimetallic NiCo boride nanoparticles confined in MXene are shown to accomplish high-performance nitrogen reduction electrolysis. Taking advantage of the synergistic effect in specific compositions with unique electronic d and p orbits and typical architecture of rich nanosized particles embedded in the interconnected conductive network, the synthesized MXene@NiCoB composite demonstrates extensive improvements in nitrogen molecule chemisorption, active area exposure and charge transport. As a result, optimal NH 3 yield rate of 38.7 μg h -1 mgcat. -1 and Faradaic efficiency of 6.92% are acquired in 0.1 M Na 2 SO 4 electrolyte. Moreover, the great catalytic performance can be almost entirely maintained in the cases of repeatedly-cycled and long-term electrolysis. Theoretical investigations reveal that the nitrogen reduction reaction on MXene@NiCoB catalyst proceeds according to the distal pathway, with a distinctly-reduced energy barrier relative to the Co 2 B counterpart. In conclusion, this work may inspire a new route towards the rational catalyst design for the nitrogen reduction reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combining geometric-optical and spectral invariants theories for modeling canopy fluorescence anisotropy

The spectral invariants theory ( p -theory) has received much attention in the field of quantitative remote sensing over the past few decades and has been adopted for modeling of canopy solar-induced chlorophyll fluorescence (SIF). However, the spectral invariant properties (SIP) in simple analytical formulae have not been applied for modeling canopy fluorescence anisotropy primarily because they are parameterized in terms of leaf total scattering, which precludes the differentiation between forward and backward leaf SIF emissions. In this study, we have developed the canopy-SIP SIF model by combining geometric-optical (GO) theory to account for asymmetric leaf SIF forward and backward emissions at the first-order scattering and by modeling multiple scattering based on the p-theory, thus avoiding the dependence on radiative transfer models. The applicability of the model simulations especially over 3D heterogeneous canopies was improved by incorporating canopy structure through multi-angular clumping index, and by modeling single scattering from the four components of the scene in view according to the GO approach. The results show good consistency with both the state-of-the-art SIF models and multi-angular field SIF observations over grass and chickpea canopies. Further, the coefficient of determination (R²) between the simulated SIF and field measurements was 0.75 (red) and 0.74 (far-red) for chickpea, and 0.65 (both red and far-red) for grass. The average relative error was approximately 3% for 1D homogeneous scenes when comparing the canopy-SIP SIF model simulations to the SCOPE model simulations, and around 4% for the 3D heterogeneous scene when comparing to the LESS model simulations. The results indicate that the proposed approach for separating asymmetric leaf SIF emissions is a robust way to keep a balance between satisfactory simulation accuracy and efficiency. Model simulations suggest that neglecting the leaf SIF asymmetry can lead to an underestimation of canopy red SIF by 6.3% to 42.6% for various leaf biochemical and canopy structural parameters. This study presents a simple but efficient analytical approach for canopy fluorescence modeling, with potential for large-scale canopy fluorescence simulations.

3D heterogeneous structure↗

Femtosecond time-resolved two-photon photoemission studies of ultrafast carrier relaxation in Cu2O photoelectrodes

Abstract Cuprous oxide (Cu 2 O) is a promising material for solar-driven water splitting to produce hydrogen. However, the relatively small accessible photovoltage limits the development of efficient Cu 2 O based photocathodes. Here, femtosecond time-resolved two-photon photoemission spectroscopy has been used to probe the electronic structure and dynamics of photoexcited charge carriers at the Cu 2 O surface as well as the interface between Cu 2 O and a platinum (Pt) adlayer. By referencing ultrafast energy-resolved surface sensitive spectroscopy to bulk data we identify the full bulk to surface transport dynamics for excited electrons rapidly localized within an intrinsic deep continuous defect band ranging from the whole crystal volume to the surface. No evidence of bulk electrons reaching the surface at the conduction band level is found resulting into a substantial loss of their energy through ultrafast trapping. Our results uncover main factors limiting the energy conversion processes in Cu 2 O and provide guidance for future material development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗