SEARCH · Search NASA

Results for “Range limit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Design and Validation of a High-Throughput Reductive Catalytic Fractionation Method

Reductive catalytic fractionation (RCF) is a promising method to extract and depolymerize lignin from biomass, and bench-scale studies have enabled considerable progress in the past decade. RCF experiments are typically conducted in pressurized batch reactors with volumes ranging between 50 and 1000 mL, limiting the throughput of these experiments to one to six reactions per day for an individual researcher. Here, we report a high-throughput RCF (HTP-RCF) method in which batch RCF reactions are conducted in 1 mL wells machined directly into Hastelloy reactor plates. The plate reactors can seal high pressures produced by organic solvents by vertically stacking multiple reactor plates, leading to a compact and modular system capable of performing 240 reactions per experiment. Using this setup, we screened solvent mixtures and catalyst loadings for hydrogen-free RCF using 50 mg poplar and 0.5 mL reaction solvent. The system of 1:1 isopropanol/methanol showed optimal monomer yields and selectivity to 4-propyl substituted monomers, and validation reactions using 75 mL batch reactors produced identical monomer yields. To accommodate the low material loadings, we then developed a workup procedure for parallel filtration, washing, and drying of samples and a 1H nuclear magnetic resonance spectroscopy method to measure the RCF oil yield without performing liquid-liquid extraction. As a demonstration of this experimental pipeline, 50 unique switchgrass samples were screened in RCF reactions in the HTP-RCF system, revealing a wide range of monomer yields (21-36%), S/G ratios (0.41-0.93), and oil yields (40-75%). These results were successfully validated by repeating RCF reactions in 75 mL batch reactors for a subset of samples. We anticipate that this approach can be used to rapidly screen substrates, catalysts, and reaction conditions in high-pressure batch reactions with higher throughput than standard batch reactors.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

DOE OSTI2026

Kinetics vs Thermodynamics: Engineering Photoredox Reactivity from an Upper Excited State of Fe II

Ultrafast deactivation of metal-to-ligand charge-transfer (MLCT) states into low-lying metal-centered states has long limited the utility of first-row transition-metal complexes in a broad range of applications, including photoredox catalysis. Here we bypass such limitations using a Fe II -pyridinium carbene complex to enable electron transfer reactivity directly from a higher-lying MLCT state. Time-resolved spectroscopic data revealed that the higher-energy MLCT manifold relaxes to lower-lying metal-centered states with a time constant of ca. 3 ps. The nature of the metal-centered (MC) excited state as a 3 MC (i.e., S = 1) was inferred from variable-temperature transient absorption studies. These experiments also revealed that the ground-state recovery process occurs at or very near the “Marcus barrierless regime”, thereby allowing for an estimate of its excited-state redox potential. The detailed picture of the energetics of this compound that emerged enabled fine-tuning of competing thermodynamic and kinetic pathways to effect electron transfer from the higher-energy MLCT excited state prior to relaxation to the ligand-field manifold. We believe these results open an unexplored landscape for the use of earth-abundant first-row transition-metal-based chromophores for applications in light-to-chemical energy conversion.

charge transfer↗

DOE OSTI2024

Milky Way white dwarfs as sub-GeV to multi-TeV dark matter detectors

Here, we show that Milky Way white dwarfs are excellent targets for dark matter (DM) detection. Using Fermi and H.E.S.S. Galactic center gamma-ray data, we investigate sensitivity to DM annihilating within white dwarfs into long-lived or boosted mediators and producing detectable gamma rays. Depending on the Galactic DM distribution, we set new constraints on the spin-independent scattering cross section down to 10 -45 -10 -41 cm 2 in the sub-GeV DM mass range, which is multiple orders of magnitude stronger than existing limits. For a generalized NFW DM profile, we find that our white dwarf constraints exceed spin-independent direct detection limits across most of the sub-GeV to multi-TeV DM mass range, achieving sensitivities as low as about 10 -46 cm 2 . In addition, we improve earlier versions of the DM capture calculation in white dwarfs, by including the low-temperature distribution of nuclei when the white dwarf approaches crystallization. This yields smaller capture rates than previously calculated by a factor of a few up to two orders of magnitude, depending on white dwarf size and the astrophysical system.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2019

Thermal diffusivity above the Mott-Ioffe-Regel limit

We present high-resolution thermal diffusivity measurements on several near optimally doped electron- and hole-doped cuprate systems in a temperature range that passes through the Mott-Ioffe-Regel limit, above which the quasiparticle picture fails. Our primary observations are that the inverse thermal diffusivity is linear in temperature and can be fitted to $D^{-1}_Q = aT + b$. The slope a is interpreted through the Planckian relaxation time $τ ≈ ℏ/k_BT$ and a thermal diffusion velocity v B, which is close, but larger than the sound velocity. The intercept b represents a crossover diffusion constant that separates coherent from incoherent quasiparticles. These observations suggest that both phonons and electrons participate in the thermal transport, while reaching the Planckian limit for relaxation time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Cordon screen: A cordon-based congestion pricing policy evaluation method for U.S. cities

Global trends toward urbanization will exacerbate traffic congestion, delays in economic productivity, and air pollution issues for growing cities. Traffic congestion pricing is one method available to help ameliorate these concerns. New York City is on the verge of implementing a cordon-based traffic congestion pricing policy around its central business district. For budget-constrained municipalities, evaluating implementation of such policy could be costly. This article proposes a sketch-planning methodology, called Cordon Screen, for major U.S. cities to evaluate the net income, traffic mitigation, and avoided pollution emissions from cordon-based traffic congestion pricing. This method relies on national datasets and limited user-specific data inputs, along with a range of user-selectable assumptions informed by academic literature to deliver order-of-magnitude results. The numerous limitations of this method are acceptable for preliminary policy evaluation to determine if greater financial investment to obtain more accurate results is justified. The Denver metropolitan area is used to demonstrate Cordon Screen capabilities, with mid-range assumption results suggesting the policy is most effective at generating net income and increasing vehicle speeds on major interstates. For Denver, the policy is comparably less effective at reducing air pollution and increasing speeds on minor roadways. Validation against early implementation results from the London cordon are acceptable. Still, users should discount revenue generation projections. Choice of cordon area may be the most difficult obstacle when using the Cordon Screen. With refinement, Cordon Screen could serve as a low-cost, open-source planning evaluation tool for growing and congested U.S. cities.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2026

Direct and rapid uranium isotopic analysis of environmental sample swipes via microextraction – LS-APGD/Orbitrap mass spectrometry

Accurate and precise isotopic analysis of actinides collected on environmental sample swipes from within nuclear facilities is an important safeguarding measure for detecting undeclared materials and activities. Traditional isotope ratio (IR) analysis of actinides using a bulk digestion approach can be laborious and time-consuming. Recently, direct analysis of environmental swipe samples using a microextraction approach has been explored as an alternative to conventional bulk digestion methods. The present study further evaluates this approach for accurate and precise isotopic analysis of uranium (U) in cotton swipe samples using the liquid sampling-atmospheric pressure glow discharge (LS-APGD)/Orbitrap-FTMS Booster detection system. The instrumental parameters were optimized, and quantitative capabilities were demonstrated through excellent linearity (R2 = 0.99) across a deposited mass range of 1 to 500 ng, with a limit of detection of 90 pg (in a 2 × 4 mm region) for total U; well below typical U concentrations (ng–mg range) in environmental sample swipes. The 235U/238U ratio showed excellent accuracy (−0.3% relative difference from the certificate value), with ∼20× improvement over previous microextraction-Orbitrap methods. Precision (∼1% relative standard deviation) was also greatly enhanced by ∼5×. This study also demonstrates that figures of merit achieved with neat U solution were not highly degraded when various external interfering elements/matrices were introduced. Finally, the developed method was successfully applied to analyze practical swipe samples representative of laboratory and outdoor environments. The presented figures of merit and applicability to practical samples further validate the capability of the platform for rapid analysis (<7 minutes) of environmental swipe samples.

Shrestha, Suraj [Clemson University, SC]↗

DOE OSTI2025

Super-Resolution Ptychography with Small Segmented Detectors

To overcome the spatial resolution limit set by aperture-limited diffraction in traditional scanning transmission electron microscopy, microscopists have developed ptychography enabled by iterative phase retrieval algorithms and high-dynamic-range pixel array detectors. Current detector designs are limited by the data rate off chip, so a high-pixel-count detector has a proportionally lower frame rate than the few-segment detectors used for differential phase contrast (DPC) imaging. This slower acquisition speed leads to heightened vulnerability to scan noise, drift, and potential sample damage. This creates opportunities for repurposing fast segmented detectors for ptychography by trading a reduction in reciprocal space pixels for an increase in real space pixels. Here, we explore a strategy of oversampling in real space and instead apply detector pixel upsampling during the reconstruction process. Further, we demonstrate the viability of achieving super-resolution ptychography on thin objects using only 2 × 2 detector pixels, surpassing the resolution of integrated DPC (iDPC) imaging. With optimization using simulated datasets and experiments on MoTe 2 /WSe 2 bilayer moiré superlattices, we achieved super-resolution ptychography reconstructions under rapid acquisition conditions (37.5 pA, 1 μs dwell time), yielding over 50% improvements in contrast and information limit compared to annular dark field and iDPC imaging on the same detectors.

2D materials↗

DOE OSTI2022

A New Search for Low-mass Dark Matter and an Examination and Reduction of the Uncertainty due to the Photoelectric Absorption Cross Section using a Cryogenic Silicon Detector with Single-charge Sensitivity

Many astrophysical observations point to the abundant existence of dark matter (DM) in the universe composed of particles beyond the Standard Model. However despite numerous experiments using different techniques, DM particles have yet to be directly observed. The Super Cryogenic Dark Matter Search (SuperCDMS) SNOLAB experiment will employ silicon and germanium crystal detectors operated at temperatures as low as 15~mK to probe DM interactions using phonon and ionization signals. Recently, R\&D; facilities have developed gram-sized high-voltage eV-scale (HVeV) silicon detectors that achieve single-electron-hole-pair resolution. By probing effective DM-electron interactions, these devices can be used for searches of low-mass DM candidates.This dissertation presents a DM search experiment known as HVeV Run~2 that employs a second-generation HVeV detector operated in an above-ground laboratory at Northwestern University (IL, USA). Energy spectra are obtained from a blind analysis with 0.39 and 1.2\,g-days of exposure with the detector biased at 60 and 100\,V, respectively. The 0.93~gram detector achieves a 3\,eV phonon energy resolution, corresponding to a world-leading charge resolution of 3\,\% of a single electron-hole pair for a detector bias of 100\,V. With charge carrier trapping and impact ionization effects incorporated into the DM signal models, the resulting exclusion limits are reported for inelastic DM-electron scattering for DM masses from 0.5--$10^{4}$\,MeV$/c^{2}$; in the mass range from 1.2--50\,eV$/c^{2}$ the limits for dark photon and axion-like particle absorption are reported.Several DM search experiments, including HVeV Run~2, are sensitive to low-mass DM candidates that rely on the temperature-dependent photoelectric absorption cross section of silicon. However discrepancies in the underlying literature data result in dominating systematic uncertainties on the DM exclusion limits. In order to reduce these systematic uncertainties, this dissertation presents a novel method of making a direct, low-temperature measurement of the photoelectric absorption cross section of silicon at energies near the band gap (1.2--2.8\,eV).

Wilson, Matthew James↗

DOE OSTI2020

Search for charged Higgs bosons decaying into a top and a bottom quark in the all-jet final state of pp collisions at $ \sqrt{s} $ = 13 TeV

A search for charged Higgs bosons (H$^{±}$) decaying into a top and a bottom quark in the all-jet final state is presented. The analysis uses LHC proton-proton collision data recorded with the CMS detector in 2016 at $ \sqrt{s} $ = 13 TeV, corresponding to an integrated luminosity of 35.9 fb$^{−1}$. No significant excess is observed above the expected background. Model-independent upper limits at 95% confidence level are set on the product of the H$^{±}$ production cross section and branching fraction in two scenarios. For production in association with a top quark, limits of 21.3 to 0.007 pb are obtained for H$^{±}$ masses in the range of 0.2 to 3 TeV. Combining this with a search in leptonic final states results in improved limits of 9.25 to 0.005 pb. The complementary s-channel production of an H$^{±}$ is investigated in the mass range of 0.8 to 3 TeV and the corresponding upper limits are 4.5 to 0.023 pb. These results are interpreted using different minimal supersymmetric extensions of the standard model.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Search for Higgs boson pair production in the two bottom quarks plus two photons final state in p p collisions at s = 13 TeV with the ATLAS detector

Searches are performed for nonresonant and resonant di-Higgs boson production in the $b\bar{b}γγ$ final state. The dataset used corresponds to an integrated luminosity of 139 fb –1 of proton–proton collisions at a center-of-mass energy of 13 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. No excess above the expected background is found and upper limits on the di-Higgs boson production cross sections are set. A 95% confidence-level upper limit of 4.2 times the cross section predicted by the Standard Model is set on pp → HH nonresonant production, where the expected limit is 5.7 times the Standard Model predicted value. The expected constraints are obtained for a background hypothesis excluding pp → HH production. The observed (expected) constraints on the Higgs boson trilinear coupling modifier κ λ are determined to be [–1.5, 6.7] ([– 2.4, 7.7]) at 95% confidence level, where the expected constraints on κ λ are obtained excluding pp → HH production from the background hypothesis. For resonant production of a new hypothetical scalar particle X (X → HH → $b\bar{b}γγ$), limits on the cross section for pp → X → HH are presented in the narrow-width approximation as a function of m X in the range 251 GeV ≤ m X ≤ 1000 GeV. The observed (expected) limits on the cross section for pp → X → HH range from 640 fb to 44 fb (391 fb to 46 fb) over the considered mass range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Sustainable Aviation Fuel via Hydroprocessing of Catalytic Fast Pyrolysis Oil

Cycloalkanes have been identified as a promising alternative for sustainable aviation fuel (SAF) in a recent US Department of Energy Review of Technical Pathways to SAF. Cycloalkanes can provide desirable SAF properties, including energy density, and, in addition, they may be able to provide necessary seal swelling and leakage protection and replace undesirable aromatics in aviation fuel. Catalytic fast pyrolysis (CFP) followed by hydroprocessing constitutes a platform well suited for converting biomass to cycloalkanes. CFP oils are rich in phenolic compounds and, depending on CFP catalyst, in aromatic hydrocarbons, which can both be hydrogenated to form cycloalkanes. In this work, we report results from hydroprocessing of two types of CFP oil to produce fractions boiling in the sustainable aviation fuel range and meeting tested aviation fuel specifications. CFP oils prepared over a zeolite catalyst (ZSM-5) and a hydrodeoxygenation catalyst (Pt/TiO2) were hydroprocessed over a sulfided NiMo/Al2O3 catalyst in a two-stage process (1st stage ~250 degrees C and 2nd stage 385 degrees C) in a continuous trickle-bed hydrotreater. The hydrotreated product contained 39-40% material boiling in the SAF range by distillation with a carbon efficiency of 36-37% from CFP oil to SAF fraction. The SAF fractions consisted of 82-87% of cycloalkanes, had non-detectable oxygen contents and lower heating values (LHV) above the jet fuel minimum limit of 42.8 MJ/kg. The SAF-range product also had acceptable volatility and freeze and flash points per aviation fuel specifications. The results suggest a promising pathway for SAF production via the catalytic fast pyrolysis pathway. Methods to enhance the yield of SAF will be discussed.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS↗

DOE OSTI2024

Biosynthesis of Strained Amino Acids by a PLP‐Dependent Enzyme through Cryptic Halogenation

Abstract Amino acids (AAs) are modular building blocks which nature uses to synthesize both macromolecules, such as proteins, and small molecule natural products, such as alkaloids and non‐ribosomal peptides. While the 20 main proteinogenic AAs display relatively limited side chain diversity, a wide range of non‐canonical amino acids (ncAAs) exist that are not used by the ribosome for protein synthesis, but contain a broad array of structural features and functional groups. In this communication, we report the discovery of the biosynthetic pathway for a new ncAA, pazamine, which contains a cyclopropane ring formed in two steps. In the first step, a chlorine is added onto the C 4 position of lysine by a radical halogenase, PazA. The cyclopropane ring is then formed in the next step by a pyridoxal‐5′‐phosphate‐dependent enzyme, PazB, via an S N 2‐like attack at C 4 to eliminate chloride. Genetic studies of this pathway in the native host, Pseudomonas azotoformans , show that pazamine potentially inhibits ethylene biosynthesis in growing plants based on alterations in the root phenotype of Arabidopsis thaliana seedlings. We further show that PazB can be utilized to make an alternative cyclobutane‐containing AA. These discoveries may lead to advances in biocatalytic production of specialty chemicals and agricultural biotechnology.

Sosa, Max B.↗

DOE OSTI2025

Polymer Size–Catalytic Activity Relationships in Solution by Fluorescence Correlation Spectroscopy

Measuring the catalytic activity of specific sizes of polymers with active catalysts in solution is typically challenging, due to limited instrument detection sensitivity and/or dynamic range. Here, a fluorescence correlation spectroscopy (FCS) method is developed to determine the catalytic activity of living polymers of a specific apparent size in solution. Deviation from a single-component FCS data fitting, as assessed by χ2, is also introduced and developed as a “speciation index”—a method to evaluate and track changes in the relative amount of distinct polymer sizes with reaction progress. These methods are enabled by incorporating a selectively reactive fluorescent monomer into growing polydicyclopentadiene or polynorbornene during ring-opening metathesis polymerization (ROMP). Compared to polynorbornene, data showed that catalysts in aggregates of polyDCPD retained higher activity for longer—outcomes not directly inferable from simple diffusional-access predictions. Here, the ability to assign catalytic activity to polymers of specific sizes, and then to determine how this activity evolves with reaction progress, support long-term goals in the development and measurement of nano-objects that possess size-dependent catalytic activity.

Active catalyst↗

DOE OSTI2020

Leaf traits and canopy structure together explain canopy functional diversity: an airborne remote sensing approach

Plant functional diversity is strongly connected to photosynthetic carbon assimilation in terrestrial ecosystems. However, many of the plant functional traits that regulate photosynthetic capacity, including foliar nitrogen concentration and leaf mass per area, vary significantly between and within plant functional types and vertically through forest canopies, resulting in considerable landscape-scale heterogeneity in three dimensions. Hyperspectral imagery has been used extensively to quantify functional traits across a range of ecosystems but is generally limited to providing information for top-of-canopy leaves only. On the other hand, lidar data can be used to retrieve the vertical structure of forest canopies. Because these data are rarely collected at the same time, there are unanswered questions about the effect of forest structure on the 3-D spatial patterns of functional traits across ecosystems. In the United States, the National Ecological Observatory Network's Airborne Observation Platform (NEON AOP) provides an opportunity to address this structure-function relationship by collecting lidar and hyperspectral data together across a variety of ecoregions. With a fusion of hyperspectral and lidar data from the NEON AOP and field-collected foliar trait data, we assessed the impacts of forest structure on spatial patterns of N. In addition, we examine the influence of abiotic gradients and management regimes on top of canopy %N and total canopy N (i.e. the total amount of N (g/m 2 ) within a forest canopy) at a NEON site consisting of a mosaic of open longleaf pine and dense broadleaf deciduous forests. Here, our resulting maps suggest that in contrast with top-of-canopy values, total canopy N variation is dampened across this landscape resulting in relatively homogeneous spatial patterns. At the same time, we found that leaf functional diversity and canopy structural diversity showed distinct dendritic patterns related to the spatial distribution of plant functional types.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Additively manufactured heat exchangers: a review on opportunities and challenges

Heat Exchangers (HXs) are crucial engineering components for thermal management. The broad range of applications and the current limits of traditional manufacturing techniques has directed designers and researchers to utilize additive manufacturing (AM) technologies to open a new chapter in HXs design and development. AM has created a world of opportunity to redesign HXs in pioneering forms, shapes, and sizes. In other words, AM technologies provides significant opportunities to increase surface area to volume ratio in heat transfer devices. On the other hand, there are certain challenges to overcome in order to fully grasp the benefits of AM technologies. This thorough review study is different from other published review as it intends to highlight the challenges and opportunities in design and manufacturing of HXs. In addition, part of this study is dedicated to investigate the experimental characterization of additively manufactured HXs. Furthermore, the significant details associated with experimental characterization are normally overlooked in review studies.

42 ENGINEERING↗

DOE OSTI2021

Attributable human-induced changes in the magnitude of flooding in the Houston, Texas region during Hurricane Harvey

Abstract The human influence on precipitation during tropical cyclones due to the global warming is now well documented in the literature. Several studies have found increases in Hurricane Harvey’s total precipitation over the Greater Houston area ranging from the Clausius-Clapeyron limit of 7% to as much as 38% locally. Here we use a hydraulic model to translate these attribution statements about precipitation to statements about the resultant flooding and associated damages. We find that while the attributable increase in the total volume of flood waters is the same as the attributable increase in precipitation, the attributable increase in the total area of the flood is less. However, we also find that in the most heavily flooded parts of Houston, the local attributable increases in flood area and volume are substantially larger than the increase in total precipitation. The results of this storyline attribution analysis of the Houston flood area are used to make an intuitive best estimate of the cost of Hurricane Harvey attributable to anthropogenic global warming as thirteen billion US dollars.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Hydroxymethanesulfonate (HMS) Formation during Summertime Fog in an Arctic Oil Field

Hydroxymethanesulfonate (HMS) is produced in the aqueous-phase reaction of formaldehyde (HCHO) and sulfur dioxide (SO 2 ) and has been proposed as a significant contributor to midlatitude wintertime pollution events. In this work, we report HMS detection within submicrometer atmospheric aerosols during frequent late summer, regional fog events in an Arctic oil field. The number fraction of individual particles containing HMS increased during fog periods, consistent with aqueous-phase formation. The single-particle mass spectra showed the primary particle signature (oil field emissions), plus secondary oxidized organics and sulfate, consistent with aqueous-phase processing. HMS mass concentrations ranged from below the ion chromatography limit of detection (0.3 ng/m 3 ) to 1.6 ng/m 3 , with sulfate concentrations of 37-222 ng/m 3 . HCHO and SO 2 measurements suggest that the fog HMS production rate is ~10 times higher in the oil fields than in the upwind Beaufort Sea. Aqueous-phase reactions of local oil field emissions during frequent summertime regional fog events likely have downwind impacts on Arctic aerosol composition. The potential for fog-based HMS production was estimated to be an order of magnitude higher in Fairbanks and Anchorage, AK, than in the oil fields and may explain the missing organosulfate source contributing to Fairbanks air quality.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Fourier-like Thermal Relaxation of Nanoscale Explosive Hot Spots

Hot spots are local regions of high temperature that are widely considered to govern explosive initiation. Hot spot dynamics rests on a delicate balance between heat generation due to chemical reactions and heat loss through thermal conduction, making accurate determinations of the conductivity under extreme conditions a key component of predictive explosive models. We develop here an approach to directly determine the thermal transport properties of explosive hot spots with realistic initial structures through a combination of molecular dynamics (MD) and diffusive heat equation (HEq) modeling. Effective thermal conductivity values are determined by fitting HEq models to MD predictions of long timescale hot spot relaxation. The approach is applied to model hot spots in the molecular crystalline explosive 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) for a range of shock strengths and two limiting cases for impact orientation. Isotropic and anisotropic HEq models yield similar results, despite TATB exhibiting some of the largest and most anisotropic thermal conductivity values for explosive near normal conditions. The conductivity is found to be a strong function of density, which parametrically captures dependence on temperature, pressure, and material state. The associated root-mean-square errors of the fitted HEq models are approximately 5% of MD predicted final equilibrium temperatures. Here, the conductivity values determined here for TATB hot spots are considerably larger than those used in a prior hot spot criticality study, which may significantly impact predictions for critical hot spot sizes. The approach provides a convenient foundation for determining the effective thermal conductivity for hot spot problems in other explosives and directly yields information on reasonable approximations that might be taken in higher-level models for those materials.

36 MATERIALS SCIENCE↗