Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPACE LAW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Steering law for parallel mounted double-gimbaled control moment gyros. Revision A

Mounting of double-gimbaled control moment gyros (CMG's) of unlimited outer gimbal angle freedom with all their outer gimbal axes parallel allows drastic simplification of the CMG steering law development hardware. The advantages of the parallel mounting for the CMG steering law development are such that a law could be developed which is applicable to any number of CMG's with arbitrary angular momentum. Parallel mounting of the CMG's in conjunction with the steering law can therefore be considered a CMG kit suitable for many missions of differing momentum requirements. It also means that increasing momentum demands during the design phase of a space vehicle can be easily met by the addition of one or more CMG's of the original momentum capacity rather than a redesign to a larger momentum capacity. Another advantage of the parallel mounting is that the failure of any CMG can be treated like any other, i.e., only one failure mode is possible. The CMG steering law distributes the CMG momentum vectors such that all inner gimbal angles are equal which reduces the rate requirements on the outer gimbal axes. The steering law also spreads the outer gimbals which ensures avoidance of singularities internal to the angular momentum envelope.

Kennel, H. F.↗
NASA NTRS1985

The construction of airfoil pressure models by the plate method: Achievements, current research, technology development and potential applications

A method of constructing airfoils by inscribing pressure channels on the face of opposing plates, bonding them together to form one plate with integral channels, and contour machining this plate to form an airfoil model is described. The research and development program to develop the bonding technology is described as well as the construction and testing of an airfoil model. Sample aerodynamic data sets are presented and discussed. Also, work currently under way to produce thin airfoils with camber is presented. Samples of the aft section of a 6 percent airfoil with complete pressure instrumentation including the trailing edge are pictured and described. This technique is particularly useful in fabricating models for transonic cryogenic testing, but it should find application in a wide ange of model construction projects, as well as the fabrication of fuel injectors, space hardware, and other applications requiring advanced bonding technology and intricate fluid passages.

Lawing, P. L.↗
NASA NTRS1990

Integrated controls-structures design methodology development for a class of flexible spacecraft

Future utilization of space will require large space structures in low-Earth and geostationary orbits. Example missions include: Earth observation systems, personal communication systems, space science missions, space processing facilities, etc., requiring large antennas, platforms, and solar arrays. The dimensions of such structures will range from a few meters to possibly hundreds of meters. For reducing the cost of construction, launching, and operating (e.g., energy required for reboosting and control), it will be necessary to make the structure as light as possible. However, reducing structural mass tends to increase the flexibility which would make it more difficult to control with the specified precision in attitude and shape. Therefore, there is a need to develop a methodology for designing space structures which are optimal with respect to both structural design and control design. In the current spacecraft design practice, it is customary to first perform the structural design and then the controller design. However, the structural design and the control design problems are substantially coupled and must be considered concurrently in order to obtain a truly optimal spacecraft design. For example, let C denote the set of the 'control' design variables (e.g., controller gains), and L the set of the 'structural' design variables (e.g., member sizes). If a structural member thickness is changed, the dynamics would change which would then change the control law and the actuator mass. That would, in turn, change the structural model. Thus, the sets C and L depend on each other. Future space structures can be roughly divided into four mission classes. Class 1 missions include flexible spacecraft with no articulated appendages which require fine attitude pointing and vibration suppression (e.g., large space antennas). Class 2 missions consist of flexible spacecraft with articulated multiple payloads, where the requirement is to fine-point the spacecraft and each individual payload while suppressing the elastic motion. Class 3 missions include rapid slewing of spacecraft without appendages, while Class 4 missions include general nonlinear motion of a flexible spacecraft with articulated appendages and robot arms. Class 1 and 2 missions represent linear mathematical modeling and control system design problems (except for actuator and sensor nonlinearities), while Class 3 and 4 missions represent nonlinear problems. The development of an integrated controls/structures design approach for Class 1 missions is addressed. The performance for these missions is usually specified in terms of (1) root mean square (RMS) pointing errors at different locations on the structure, and (2) the rate of decay of the transient response. Both of these performance measures include the contributions of rigid as well as elastic motion.

Maghami, P. G.↗
NASA NTRS2004

Steps in Solution Growth: Revised Gibbs-Thomson Law, Turbulence and Morphological Stability

Two groups of new phenomena revealed by AFM and high resolution optical interferometry on crystal faces growing from solutions will be discussed. 1. Spacing between strongly polygonized spiral steps with low less than 10(exp -2) kink density on lysozyme and K- biphtalate do not follow the Burton-cabrera-Frank theory. The critical length of the yet immobile first Short step segment adjacent to a pinning defect (dislocation, stacking fault) is many times longer than that following from the step free energy. The low-kink density steps are typical of many growth conditions and materials, including low temperature gas phase epitaxy and MBE. 2. The step bunching pattern on the approx. 1 cm long { 110) KDP face growing from the turbulent solution flow (Re (triple bonds) 10(exp 4), solution flow rate approx. 1 m/s) suggests that the step bunch height does not increase infinitely as the bunch path on the crystal face rises, as is usually observed on large KDP crystals. The mechanism controlling the maximal bunch width and height is based on the drag of the solution depleted by the step bunch down thc solution stream. It includes splitting, coagulation and interlacing of bunches

Chernov, A. A.↗
NASA NTRS2017

Data Production on Past and Future NASA Missions

Data return is a metric that is commonly publicized for all space science missions. In the early days of the Space Program, this figure was small, and could be described in bits or maybe even megabits. But now, missions are capable of returning data volumes two or three orders of magnitude larger. For example, Voyager 1 and 2 combined produced a little over 5 Terabits of data in 39 years of operation. In contrast, the Cassini mission, launched two decades after Voyager, produced about one and a half times those data volumes in half the time. NISAR, an Earth Science Mission currently in implementation, plans to produce over 28 Petabits of raw data in just 3 years. This means that NISAR will produce about as many data in 30 days as the combined data production of nearly all planetary missions to date. These increases in capability are a result of technology enhancements in two main areas: telecommunications architecture (both space and ground segments) and data storage technology. This paper describes the progression of these two technologies over the course of more than three decades of space missions and provides additional insight into the design of the end-to-end NISAR Data System Architecture. Trends in the data are briefly explored and compared to Moore’s Law which provides only a qualitative model for memory growth but not for data production. In summary, early missions are found to be driven by unrefined processes while later missions, having utilized earlier lessons learned, focus more on improvements to flight and ground capabilities. Data return seems to fall into three categories. First, deep space missions are driven by the large distances that limit data return to the Earth. Next, the orbiter infrastructure around Mars helps these missions generate more data than other deep space spacecraft. Finally, near-Earth missions have the greatest capabilities for the studied metrics due to their close proximity to Earth and the ground network availability.

Xaypraseuth, Peter↗
NASA NTRS1974

Automatic spacecraft detumbling by internal mass motion

In the operation of future manned space vehicles, there will always be a finite probability that an accident will occur which results in uncontrolled tumbling of a craft. Hard docking by a manned rescue vehicle is not acceptable because of the hazardous environment to which rescue crewmen would be exposed and excessive maneuvering accelerations during docking operations. A movable-mass control concept, which is activated upon initiation of tumbling and is autonomous, can convert tumbling motion into simple spin. The complete equations of motion for an asymmetric rigid spacecraft containing a movable mass are presented, and appropriate control law and system parameters are selected to minimize kinetic energy, resulting in simple spin about the major principal axis. Simulations indicate that for a large space station experiencing a collision, which results in tumbling, a 1% movable mass is capable of stabilizing motion in 2 hr.

Edwards, T. L.↗
NASA NTRS1980

Four years of zodiacal light observations from the Helios space probes - Evidence for a smooth distribution of interplanetary dust

Zodiacal light experiments on Helios 2 that has been operating continually since January 1976 are discussed, with the purpose of elucidating the distribution of interplanetary dust. Results for the observed gradient of zodiacal light intensity between 1 A.U. and perihelion at 0.3 A.U. show that for all elongations, from 17.5 deg to 135 deg from the sun, the exponent of intensity increase is -2.3 plus or minus 0.1. Color investigations show no systematic variation with heliocentric distance, but a slight reddening is present, increasing towards small elongations. The degree of polarization is found to be higher at 1 A.U. than given previously and decreases towards the sun, even if no correction for electron scattering is made. All results thus fit the hypothesized power law for radial distribution of dust. It is concluded from the stability of zodiacal intensity that the distribution of interplanetary dust is rather simple in space and quite constant in time.

Leinert, C.↗
NASA NTRS2023

Direct Measurement of the Cosmic-Ray Helium Spectrum from 40 GeV to 250 TeV with the Calorimetric Electron Telescope on the International Space Station

We present the results of a direct measurement of the cosmic-ray helium spectrum with the CALET instrument in operation on the International Space Station since 2015. The observation period covered by this analysis spans from October 13, 2015, to April 30, 2022 (2392 days). The very wide dynamic range of CALET allowed for the collection of helium data over a large energy interval, from ∼40 GeV to ∼250 TeV, for the first time with a single instrument in low Earth orbit. The measured spectrum shows evidence of a deviation of the flux from a single power law by more than 8σ with a progressive spectral hardening from a few hundred GeV to a few tens of TeV. This result is consistent with the data reported by space instruments including PAMELA, AMS-02, and DAMPE and balloon instruments including CREAM. At higher energy we report the onset of a softening of the helium spectrum around 30 TeV (total kinetic energy). Though affected by large uncertainties in the highest energy bins, the observation of a flux reduction turns out to be consistent with the most recent results of DAMPE. A double broken power law is found to fit simultaneously both spectral features: the hardening (at lower energy) and the softening (at higher energy). A measurement of the proton to helium flux ratio in the energy range from 60 GeV=n to about 60 TeV=n is also presented, using the CALET proton flux recently updated with higher statistics.

O Adriani↗
NASA NTRS2002

Maximum Likelihood Estimation of the Broken Power Law Spectral Parameters with Detector Design Applications

The method of Maximum Likelihood (ML) is used to estimate the spectral parameters of an assumed broken power law energy spectrum from simulated detector responses. This methodology, which requires the complete specificity of all cosmic-ray detector design parameters, is shown to provide approximately unbiased, minimum variance, and normally distributed spectra information for events detected by an instrument having a wide range of commonly used detector response functions. The ML procedure, coupled with the simulated performance of a proposed space-based detector and its planned life cycle, has proved to be of significant value in the design phase of a new science instrument. The procedure helped make important trade studies in design parameters as a function of the science objectives, which is particularly important for space-based detectors where physical parameters, such as dimension and weight, impose rigorous practical limits to the design envelope. This ML methodology is then generalized to estimate broken power law spectral parameters from real cosmic-ray data sets.

Howell, Leonard W.↗
NASA NTRS1995

A class of stabilizing controllers for flexible multibody systems

The problem of controlling a class of nonlinear multibody flexible space systems consisting of a flexible central body to which a number of articulated appendages are attached is considered. Collocated actuators and sensors are assumed, and global asymptotic stability of such systems is established under a nonlinear dissipative control law. The stability is shown to be robust to unmodeled dynamics and parametric uncertainties. For a special case in which the attitude motion of the central body is small, the system, although still nonlinear, is shown to be stabilized by linear dissipative control laws. Two types of linear controllers are considered: static dissipative (constant gain) and dynamic dissipative. The static dissipative control law is also shown to provide robust stability in the presence of certain classes of actuator and sensor nonlinearities and actuator dynamics. The results obtained for this special case can also be readily applied for controlling single-body linear flexible space structures. For this case, a synthesis technique for the design of a suboptimal dynamic dissipative controller is also presented. The results obtained in this paper are applicable to a broad class of multibody and single-body systems such as flexible multilink manipulators, multipayload space platforms, and space antennas. The stability proofs use the Lyapunov approach and exploit the inherent passivity of such systems.

Joshi, Suresh M.↗
NASA NTRS1981

Optimal transfer between close near-circular orbits

A nonlinear analysis is carried out for the optimal transfer between close near-circular noncoplanar orbits with no limit on time. The degeneracy of the linear analyses of Marec and Edelbaum is, thereby, removed and with the aid of a generalized Jacobi test, it is established that the minimum-impulse transfer requires, at most, three impulses. A field of extremals is generated in an orbit element space starting with the initial state and anticipated adjoint variables and integrating these variables by using the optimal thrust control law that maximizes the variational Hamiltonian. The nonoptimality of any four-impulse strategy is determined numerically by observing the reflection of every extremal from either an envelope (conjugate point test) or a switching surface on or before the application of the fourth impulse. This test is carried out in Regions I, II, and III of Marec, as well as the special transition region of Breakwell near the boundary of Region III.

Kechichian, J.↗
NASA NTRS1983

A proposed approach to the application of nonlinear irreversible thermodynamics to fracture in composite materials

The fracture criteria upon which most fracture mechanics is based involves an energy balance that is not appropriate for the fracture mechanics of viscoelastic materials such as polymer matrix composites. A more appropriate criterion based upon nonequilibrium thermodynamics and involving a power balance rather than an energy balance is proposed. This crierion is based upon a reformulation of the second law of thermodynamics which focuses attention on the total Legendre transform of energy expressed as a functional over time and space. This excess energy functional can be shown to be equivalent to the Rice J integral if the only irreversible process is the propogation of a single crack completely through the thickness of the specimen and if the crack propogation is assured to be independent of time. For the more general case of more than one crack in a viscoelastic medium integration over both time and space is required. Two experimentally measurable parameters are proposed which should permit the evaluation of this more general fracture criterion.

Lindenmeyer, P. H.↗
NASA NTRS1987

An optimal resolved rate law for kinematically redundant manipulators

The resolved rate law for a manipulator provides the instantaneous joint rates required to satisfy a given instantaneous hand motion. When the joint space has more degrees of freedom than the task space, the manipulator is kinematically redundant and the kinematic rate equations are underdetermined. These equations can be locally optimized, but the resulting pseudo-inverse solution has been found to cause large joint rates in some cases. A weighting matrix in the locally optimized (pseudo-inverse) solution is dynamically adjusted to control the joint motion as desired. Joint reach limit avoidance is demonstrated in a kinematically redundant planar arm model. The treatment is applicable to redundant manipulators with any number of revolute joints and to non-planar manipulators.

Bourgeois, B. J.↗
NASA NTRS1987

An optimal resolved rate law for kindematically redundant manipulators

The resolved rate law for a manipulator provides the instantaneous joint rates required to satisfy a given instantaneous hand motion. When the joint space has more degrees of freedom than the task space, the manipulator is kinematically redundant and the kinematic rate equations are underdetermined. These equations can be locally optimized, but the resulting pseudo-inverse solution was found to cause large joint rates in some case. A weighting matrix in the locally optimized (pseudo-inverse) solution is dynamically adjusted to control the joint motion as desired. Joint reach limit avoidance is demonstrated in a kinematically redundant planar arm model. The treatment is applicable to redundant manipulators with any number of revolute joints and to nonplanar manipulators.

Bourgeois, B. J.↗
NASA NTRS1991

Resolved rate and torque control schemes for large scale space based kinematically redundant manipulators

Resolved rate control of kinematically redundant ground based manipulators is a challenging problem. The structural, actuator, and control loop frequency characteristics of industrial grade robots generally allow operation with resolved rate control; a rate command is achievable with good accuracy. However, space based manipulators are different, typically have less structural stiffness, more motor and joint friction, and lower control loop cycle frequencies. These undesirable characteristics present a considerable Point of Resolution (POR) control problem for space based, kinematically redundant manipulators for the following reason: a kinematically redundant manipulator requires an arbitrary constraint to solve for the joint rate commands. A space manipulator will not respond to joint rate commands because of these characteristics. A space based manipulator simulation, including free end rigid body dynamics, motor dynamics, motor striction/friction, gearbox backlash, joint striction/friction, and Space Station Remote Manipulator System type configuration parameters, is used to evaluate the performance of a documented resolved rate control law. Alternate schemes which include torque control are also evaluated.

Robert W Bailey↗
NASA NTRS1992

SAGE II stratospheric density and temperature retrieval experiment

This paper describes a stratospheric density and temperature retrieval experiment based on the solar occultation measurement of the Stratospheric Aerosol and Gas Experiment (SAGE II). The entire retrieval analysis involves two inversion steps: the vertical structure inversion, which derives the profile of local atmospheric extinction from SAGE II limb optical depth data, and the species inversion, which inverts the concentration of air molecules, aerosols, ozone, and nitrogen dioxide from the derived atmospheric extinction at five SAGE II short wavelengths (0.385, 0.448, 0.453, 0.525, and 0.600 microns). The derived density profile is then used to infer the temperature distribution, assuming that the atmosphere is in hydrostatic equilibrium and obeys the ideal gas law. The temperature profiles retrieved from the SAGE II observations are compared with near-coincident, in both time and space, French Rayleigh lidar and NASA Wallops Flight Facility rocket datasonde soundings as well as the National Meteorological Center (NMC) data analyses. The results indicate that the mean SAGE II temperature agrees with the mean lidar measurements to within 2 C at altitudes from 30.5 to 52.5 km. The SAGE II and datasonde observations agree to within about 4 C in approximately the same altitude region.

Wang, Pi-Huan↗
NASA NTRS1994

On the wavelet optimized finite difference method

When one considers the effect in the physical space, Daubechies-based wavelet methods are equivalent to finite difference methods with grid refinement in regions of the domain where small scale structure exists. Adding a wavelet basis function at a given scale and location where one has a correspondingly large wavelet coefficient is, essentially, equivalent to adding a grid point, or two, at the same location and at a grid density which corresponds to the wavelet scale. This paper introduces a wavelet optimized finite difference method which is equivalent to a wavelet method in its multiresolution approach but which does not suffer from difficulties with nonlinear terms and boundary conditions, since all calculations are done in the physical space. With this method one can obtain an arbitrarily good approximation to a conservative difference method for solving nonlinear conservation laws.

Jameson, Leland↗