The Mariner IV Canopus sensor.
Canopus star sensor used for roll control of Mariner IV spacecraft
GUIDANCE SENSOR↗
SEARCH · Search NASA
Results for “STAR TRACKER”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Unidentified landmark navigation.
Unidentified landmark navigation from orbiting vehicle by computer simulation, noting instrumentation accuracies
COMPUTER SIMULATION↗
MIT's role in project Apollo. Volume 2: Optical, radar, and candidate subsystems
The development of optical, radar, and candidate subsystems for Project Apollo is discussed. The design and development of the optical subsystems for both the Apollo command and lunar spacecraft are described. Design approaches, problems, and solutions are presented. The evolution of radar interfaces with the GN&C system is discussed; these interfaces involved both hardware and software in a relatively complex interrelationship. The design and development of three candidate subsystems are also described. The systems were considered for use in Apollo, but were not incorporated into the final GN&C system. The three subsystems discussed are the star tracker-horizon photometer, the map and data viewer and the lunar module optical rendezvous system.
Source record↗
Magellan mission planning and orbital operations
The goal of NASA's Magellan mission is to understand the geological and geophysical processes that have shaped the planet Venus. Through synthetic aperture radar, radiometric, altimetric, and gravity measurements, the scientific community hopes to improve its knowledge of the planet's topography and internal mass distribution. This paper provides an overview of the Magellan mission; describes the spacecraft sequence software design, development, and test; addresses the nominal operational flow of stored sequence design and generation; briefly describes the ground processing of engineering telemetry and imaging data; and then summarizes the Magellan operational experience with non-routine behavior of the spacecraft during the cruise and mapping portions of the prime mission.
Venus↗
The SRTM Sub-arcsecond metrology camera
Explore the source record for details and available documents.
interferometry metrology star trackers↗
Characterization of an Advanced Technology CCD for the Cassini Stellar Reference Unit
Explore the source record for details and available documents.
Cassini mission Saturn CCD based star tracker Stel↗
Cassini Stellar Reference Unit: Performance Test Approach and Results
The Cassini Stellar Reference Unit (SRU) is the prime attitude determination sensor on the Cassini spacecraft...To ensure that the SRU will operate within specification for the entire mission, an extensive test program has been undertaken to characterize the SRU performance prior to launch and to quantify any expected performance degradation. Results from several eomplimentary test programs are presented and compared with pre-test performance predictions.
star↗
CMOS active pixel sensor specific performance effects on star tracker/imager position accuracy
This paper gives the status of theoretical and experimental efforts at JPL in the development of environmentally robust (radiation hard and radiation tolerant), ultra-low power, high performance CMOS active pixel sensor (APS) imagers for star tracker/imager applications.
CMOS↗
The development of a charge-coupled device tracker for spacecraft
Charge-coupled device (CCD) optical sensors have made it possible to construct high performance star and target trackers for spacecraft. The Advanced Star and Target Reference Orbital Sensor (ASTROS) trackers have been developed by JPL for the Shuttle-based astronomical flight Astro-1 and the Mariner Mark II (MMII) spacecraft. For the Shuttle application the tracker will provide the data for high precision instrument pointing and for the MMII application the tracker will provide stellar and extended target tracking data for flyby and rendezvous navigation. The specifications, architecture, and testing program for these trackers will be described. Laboratory measurements have demonstrated that these trackers can be very effective. The versatility and flexibility of the ASTROS type trackers will permit adaptation to a variety of navigation and guidance applications. These trackers represent one of the technologically advanced components that will be used in the development of the next generation of spacecraft.
Dennison, E. W.↗
Multi-purpose Active Pixel Sensor (APS) - Based Microtracker
A new, photon-sensitive, imaging array, the active pixel sensor (APS) has emerged as a competitor to the CCD imager for use in star and target trackers.
Programmable↗
A new scheme for processing noisy startracker measurements in spacecraft attitude determination systems
This paper presents a new approach to processing noisy startracker measurements in spacecraft attitude determination systems. It takes N measurements in each T-second interval and combines them to produce tracker outputs that are estimates of star position at the end of each interval, when the tracker outputs become available. This is an improvement over the standard method, measurement averaging, which generates outputs that are estimates of the average position of the star over each interval. This new scheme is superior to measurement averaging when the spacecraft has some rotation rate as in target tracking or earth pointing. Also, it is not just limited to startracker, but has potential application wherever measurement averaging of sensor outputs is used.
Polites, M. E.↗
ASTROS - High-performance CCD tracker for spacecraft
The architecture, capabilities, and testing of the Advanced Star and Target Reference Optical Sensor (ASTROS) I and II are described. The ASTROS I tracker is to be utilized for a UV telescope experiment on a Shuttle flight and is capable of measuring pointing errors of 1.5 microrad, and the ASTROS II tracker is being developed for the Mariner Mark II spacecraft to perform tracking, guiding, and optical navigation functions. The requirements for the two trackers are compared. Consideration is given to star and target tracking, optical navigation, and mass and power constraints. The compositions of the trackers, in particular the sensor, electrode drives, amplifiers and signal clamp, video signal processor, control and timing generator, memories, microprocessor, and interface, are examined.
Dennison, E. W.↗
Application of New Technology to Future Celestial Trackers
New developments in image sensors and optical materials have opened the door to dramatic mass and power reductions in celestial tracker designs. The rapid development of active pixel sensors (APS) has provided a new detector choice offering high on-chip integration of support circuitry at reduced power consumption. Silicon-Carbide (Si-C) optics are one of the new developments in low-mass optical components. We describe the celestial tracker needs of an Autonomous Feature and Star Tracking (AFAST) system designed for autonomous spacecraft control. Details of a low mass celestial tracker, based on a low power APS array and optimized for an AFAST system, are discussed.
active↗
Small Orbital Stereo Tracking Camera Technology Development
Any exploration vehicle assembled or Spacecraft placed in LEO or GTO must pass through this debris cloud and survive. Large cross section, low thrust vehicles will spend more time spiraling out through the cloud and will suffer more impacts.Better knowledge of small debris will improve survival odds. Current estimated Density of debris at various orbital attitudes with notation of recent collisions and resulting spikes. Orbital Debris Tracking and Characterization has now been added to NASA Office of Chief Technologists Technology Development Roadmap in Technology Area 5 (TA5.7)[Orbital Debris Tracking and Characterization] and is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crews due to the risk of Orbital Debris damage to ISS Exploration vehicles. The Problem: Traditional orbital trackers looking for small, dim orbital derelicts and debris typically will stare at the stars and let any reflected light off the debris integrate in the imager for seconds, thus creating a streak across the image. The Solution: The Small Tracker will see Stars and other celestial objects rise through its Field of View (FOV) at the rotational rate of its orbit, but the glint off of orbital objects will move through the FOV at different rates and directions. Debris on a head-on collision course (or close) will stay in the FOV at 14 Km per sec. The Small Tracker can track at 60 frames per sec allowing up to 30 fixes before a near-miss pass. A Stereo pair of Small Trackers can provide range data within 5-7 Km for better orbit measurements.
Bryan, Tom↗
The Lunar Orbiter: A Spacecraft to Advance Lunar Exploration
The film describes the Lunar Orbiter's mission to photograph landing areas on the Moon. The Orbiter will be launched from Cape Kennedy using an Atlas Agena booster rocket. Once it is boosted in a trajectory toward the Moon, the Orbiter will deploy two-way earth communication antennas and solar panels for electricity. Attitude control jets will position the solar panels toward the sun and a tracker for a fix on its navigational star. The Orbiter will be put in an off-center orbit around the Moon where it will circle from four to six days. Scientists on Earth will study the effects of the Moon's gravitational field on the spacecraft, then the orbit will be lowered to 28 miles above the Moon's surface. Engineers will control the Orbiter manually or by computer to activate two camera lenses. The cameras will capture pictures of 12,000 square miles of lunar surface in 25 and 400 square mile increments. Pictures will be sent back to Earth using solar power to transmit electrical signals. The signals will be received by antennas at Goldstone, CA, and in Australia and Spain. Incoming photographic data will be electronically converted and processed to produce large-scale photographic images. The mission will be directed from the Space Flight Operations Facility in Pasadena, CA by NASA and Boeing engineers. After the photographic mission, the Orbiter will continue to circle the Moon providing information about micrometeoroids and radiation in the vicinity.
Source record↗
Improved instrumental magnitude prediction expected from version 2 of the NASA SKY2000 master star catalog
The SKY2000 Master Star Catalog (MC), Version 2 and its predecessors have been designed to provide the basic astronomical input data needed for satellite acquisition and attitude determination on NASA spacecraft. Stellar positions and proper motions are the primary MC data required for operations support followed closely by the stellar brightness observed in various standard astronomical passbands. The instrumental red-magnitude prediction subsystem (REDMAG) in the MMSCAT software package computes the expected instrumental color index (CI) [sensor color correction] from an observed astronomical stellar magnitude in the MC and the characteristics of the stellar spectrum, astronomical passband, and sensor sensitivity curve. The computation is more error prone the greater the mismatch of the sensor sensitivity curve characteristics and those of the observed astronomical passbands. This paper presents the preliminary performance analysis of a typical red-sensitive CCDST during acquisition of sensor data from the two Ball CT-601 ST's onboard the Rossi X-Ray Timing Explorer (RXTE). A comparison is made of relative star positions measured in the ST FOV coordinate system with the expected results computed from the recently released Tycho Catalogue. The comparison is repeated for a group of observed stars with nearby, bright neighbors in order to determine the tracker behavior in the presence of an interfering, near neighbor (NN). The results of this analysis will be used to help define a new photoelectric photometric instrumental sensor magnitude system (S) that is based on several thousand bright star magnitudes observed with the PXTE ST's. This new system will be implemented in Version 2 of the SKY2000 MC to provide improved predicted magnitudes in the mission run catalogs.
Sande, C. B.↗
An advanced tracker design for pointing and control of space vehicles using the charge injection device
The use of charge transfer devices (CTD) in pointing and control of space vehicles is examined, with emphasis on the use of charge injection devices (CID). The selection of CTD type and CID operation, including CID signal and noise analysis and signal improvement, are discussed. Star tracking operational advantages of the CTD are pointed out, and the tracking optical concept is discussed and graphically depicted. The position interpolation procedure and the effects of rate of stellar motion on position interpolation are considered, and error analysis is examined. Finally, the breadboard and test program are discussed in detail, coarse and fine acquisition, test for star, track pattern, test procedure and results. An overall accuracy performance of approximately 0.02 pixels or approximately 0.8 arcsec for the test equipment and tracker was obtained.
Jones, C.↗