SEARCH · Search NASA

Results for “SURFACE AREA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRS1990

A composition comparison between comets P/Halley and P/Brorsen-Metcalf

The appearance of comet Brorsen-Metcalf in 1989 following only a few years on the heels of comet Halley in 1986 gave an unusual opportunity to compare two comets of similar orbital elements but potentially different physical and chemical characteristics. Photometric spectral data were acquired for Brorsen-Metcalf on two dates: 13 July 1989 and 2 August 1989. The observations were performed with the 154 cm Catalina Telescope of the University of Arizona Observatories. The spectrum for 13 July 1989 is compared to a Halley spectrum. The general appearance of the spectra is very similar, both comets showing emission due to C2, NH2, OI(D-1), and CN. Neither displays any emission features that are exclusive to only one of the two. Since water is now reasonably well established as the major driving force in the activity of a comet, the H2O production rate for comet Brorsen-Metcalf was calculated. The relative ratios between the production rates of the various species obtained from the data are presented. Results are summarized in tabular form. All species are compared to the H2O production rate of the two comets. The results indicate that C2 originates from an extended source of dust particles or small polymers in addition to parent molecules. The lower production rates of C2 and CN in Brorsen-Metcalf correlate well with both the lower dust production and their smaller increase as the comet approaches the sun. Even without a mode, the spectroscopic observations of Brorsen-Metcalf allowed significant compositional conclusions to be drawn. The NH2 abundance is lower by about a factor of three which appears to be independent of heliocentric distance. Both C2 and CN are less abundant in Brorsen-Metcalf than in Halley and do not seem to participate as much in the strong increase as the comet approaches the sun. The lower H2O production rate implies that the active surface area of the comet Brorsen-Metcalf is much smaller, or equivalently the comet as a whole is much smaller. The substantially lower continuum level for Brorsen-Metcalf cannot readily be explained by smaller or larger active surface area, and must be intrinsic to the comet's embedded dust-to-ice ratio, or to an overall smaller-sized dust grain population.

Disanti, Michael A.↗

DOE OSTI2025

Role of Pb/PbSO 4 Morphologies in Dynamic Charge Acceptance of Lead Acid Batteries

The dynamic charge acceptance (DCA) of negative pastes in lead acid batteries is studied using a continuum level model that is validated against in situ X-ray diffraction experiments. The model matches the current transient during a ten-minute, 2.4 V charge at 80% state of charge (SOC) using a distribution of PbSO 4 particles. <2% by volume of small, reactive particles is shown to provide ∼50% of the capacity during the first ten seconds. Increases in DCA with increasing carbon content are captured with increasing lead surface area. The increase in DCA when the 2.4 V charge is done after discharging to 80% SOC (vs charging to 80%) is captured by reducing the PbSO 4 particle sizes. It is hypothesized that the lower DCA after charging is caused by the absence of smaller particles that were consumed during the initial charge to 80% SOC, which is confirmed from X-ray measurements. Finally, two-particle case studies show that reducing the PbSO 4 particle size is more effective for increasing DCA than increasing the PbSO 4 dissolution rate alone. For a given lead surface area, the optimal DCA occurs when the particle sizes are large enough to avoid blocking the surface but small enough to provide dissolution/diffusion improvements.

Knehr, Kevin W. [Argonne National Laboratory (ANL)↗

DOE OSTI2022

Melt Processing Pretreatment Effects on Enzymatic Depolymerization of Poly(ethylene terephthalate)

Poly(ethylene terephthalate) (PET) is a common thermoplastic material, used in a wide variety of applications (i.e., bottles, fabrics, packaging, electronics, and automotive components). Increasing demand for PET has precipitated a need for improved recycling technology, especially for single-use PET waste. Recently, enzymatic depolymerization has shown promise as an environmentally responsible alternative for PET chemical recycling that yields economically useful products (e.g., terephthalic acid, adipic acid, and ethylene glycol). However, the depolymerization system still suffers from low rates on crystalline PET substrates, and effects of realistic waste streams are not known. In our work, PET waste is pretreated using an ultra-high-speed twin-screw extruder system. PET substrates were modified by various processing pretreatments to allow enzymes better access to depolymerize substrate materials. The effect of varying throughput and mechanical shear on structural properties of the PET waste was analyzed using molecular weight and thermal characterizations. These pretreated samples exhibit modifications in molecular weight, glass transition temperature, crystallinity, and specific surface area. The unpurified leaf-branch compost cutinase enzyme produced from the fed-batch fermentation of Escherichia coli BL21(DE3) was used in enzymatic depolymerization, where a faster reaction was observed as crystallinity was decreased and the specific surface area was increased. The rate of terephthalic acid production was also significantly higher for samples processed at lower mechanical shear with higher throughputs. As a result, this work demonstrates the potential for tailoring pretreatments in pursuit of faster and more energy efficient PET recycling using enzymes, with facile adaptation to the industrial scale for the circular economy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1998

Molecular Static Third-Order Polarizabilities of Carbon-Cage Fullerene and Their Correlation with Three Geometric Properties: Symmetry, Aromaticity, and Size

The static third-order polarizabilities (gamma) of C60, C70, five isomers of C78 and two isomers of C84 were analyzed in terms of three properties, from a geometric point of view: symmetry, aromaticity and size. The polarizability values were based on the finite field approximation using a semiempirical Hamiltonian (AM1) and applied to molecular structures obtained from density functional theory calculations. Symmetry was characterized by the molecular group order. The selection of 6-member rings as aromatic was determined from an analysis of bond lengths. Maximum interatomic distance and surface area were the parameters considered with respect to size. Based on triple linear regression analysis, it was found that the static linear polarizability (alpha) and gamma in these molecules respond differently to geometrical properties: alpha depends almost exclusively on surface area while gamma is affected by a combination of number of aromatic rings, length and group order, in decreasing importance. In the case of alpha, valence electron contributions provide the same information as all-electron estimates. For gamma, the best correlation coefficients are obtained when all-electron estimates are used and when the dependent parameter is ln(gamma) instead of gamma.

Moore, C. E.↗

DOE OSTI2020

Highly Durable and Active Pt/Sb-Doped SnO 2 Oxygen Reduction Reaction Electrocatalysts Produced by Atomic Layer Deposition

Platinum supported on mixed-metal oxides (MMOs) are a class of active and durable cathode catalysts for proton exchange membrane fuel cell (PEMFC) due to a combination of the high oxidative stability of the supports and strong-metal-support interactions (SMSI) that enable them to exceed the activity of Pt/C. Herein, we solve a significant remaining challenge with Pt/MMO systems, namely the relatively low surface area and porosity. This is achieved by dispersing nearly-uniform Pt clusters using atomic layer deposition (ALD) on highly conductive (6.2 S/cm) and stable antimony doped tin dioxide (ATO) support. ALD-Pt/ATO exhibited significantly higher electrochemically active surface area (ECSA) (74 m 2 /g) and oxygen reduction reaction (ORR) catalytic activity (102 mA/mg Pt at 0.9 V vs. RHE) compared to Pt/ATO synthesized using ethylene glycol (ECSA=31 m 2 /g Pt , mass activity=52 mA/mg Pt at 0.9 V vs. RHE) and formic acid reduction methods (ECSA=28 m 2 /g Pt , mass activity=46 mA/mg Pt at 0.9 V vs. RHE). Further characterization showed that wet chemical methods resulted in poorer Pt particle dispersion, poor control over Pt particle size distribution and chemical degradation of the support (during Pt deposition). Given the near-ideal Pt particle size distribution of the ALD-Pt/ATO, particle size growth and loss of ECSA was found to be minimal over the course of rigorous potential cycling. Thus, after 10,000 potential cycles between 1V and 1.5V vs. RHE, ALD-Pt/ATO and other Pt/ATOs were found to retain 100% of their initial ECSA compared to 57.6% retention for Pt/C. Upon testing in a H 2 /air PEMFC, following 1,000 potential cycles, the change in ALD-Pt/ATO performance was negligible while Pt/C exhibited a 68.2% loss of initial peak power density. Thus, ALD-Pt/ATO is an active and highly durable ORR electrocatalyst in PEMFCs under start-up-shut down conditions.

25 ENERGY STORAGE↗

NASA NTRS1991

Lidar measurements at Garmisch, conversion model, and midlatitude aerosol effects

Lidar backscatter soundings of stratospheric aerosol layer were routinely made at the IFU, Garmisch-Partenkirchen. After 1979 significant perturbations of the stratosphere were observed after volcano eruptions from 1980 to 1985. A volcanically quiescent period followed until the eruption at the end of 1989. Determinations of particle extinction, mass and surface area of the stratospheric particulate load are important in climatic considerations and heterogeneous chemistry effects. Balloon-borne particle counter measurements are used to derive height and time resolved conversion factors to convert lidar backscatter data to extinction, mass and surface area values. This is done by combining particle size distributions with Mie backscatter and extinction functions. These conversion factors are applicable to midlatitude lidar observations and were used to convert ruby lidar measurement at the IFU.

Jaeger, Horst↗

DOE OSTI2021

Mesocrystallizing Nanograins for Enhanced Li + Storage

Morphology and crystallinity of electrode materials have a major effect on their charge carrier storage properties when applied in rechargeable batteries. While nanosizing electrode particles (with larger surface area) and maintaining electrode integrity are both good for performance enhancement, they seem to contradict each other and can be hardly well-balanced. Herein, we designed electrode particles consisting of numerous nanograins with uniform crystalline orientation to guarantee both high surface area and high structural integrity, allowing the significant improvement of Li + storage kinetics and performance. Applying this “mesocrystallizing” strategy to a NiCo 2 O 4 -based anode, resulting in various degrees of pseudocapacitance response, the long-term cyclability and rate performance of this material have been largely enhanced. Impressively, the mesocrystalline NiCo 2 O 4 electrode exhibits a high reversible capacity of 1403 mAh g -1 after 200 cycles at 1.6 A g -1 (a rate of 1.8 C). The growth mechanism of mesocrystalline materials with different morphologies is identified to be a topotactic strctural transition process featuring a gradual edge-to-core corrasion process. This work presents an important synthetic clue to balance the morpholgy and crystallinity of battery electrode materials for their perforamnce optimization and is expected to inspire future structural design for battery materials beyond the one prototyped here.

25 ENERGY STORAGE↗

NASA NTRS1986

Representation of the vaporization behavior of turbulent polydisperse sprays by equivalent monodisperse sprays

The concept of using an equivalent monodisperse spray to represent the vaporization behavior of polydisperse sprays has been examined by numerically solving two turbulent vaporizing sprays. One involves the injection of Freon-11 in a still environment, whereas the other is a methanol spray in a still but hot environment. The use of three different mean sizes, namely, Sauter mean diameter, volume median diameter, and surface-area mean diameter, has been investigated. Results indicate a good degree of correlation between the polydisperse spray and its equivalent monodisperse sprays represented by the volume median diameter and the Sauter mean diameter, the former giving slightly better results. The surface-area mean diameter does not provide as good a correlation as the other two mean diameters.

Aggarwal, S. K.↗

NASA NTRS1987

Representation of the vaporization behavior of turbulent polydisperse sprays by 'equivalent' monodisperse sprays

Aggarwal, S. K.↗

NASA NTRS1993

Evapotranspiration and runoff from large land areas: Land surface hydrology for atmospheric general circulation models

A land surface hydrology parameterization for use in atmospheric GCM's is presented. The parameterization incorporates subgrid scale variability in topography, soils, soil moisture and precipitation. The framework of the model is the statistical distribution of a topography-soils index, which controls the local water balance fluxes, and is therefore taken to represent the large land area. Spatially variable water balance fluxes are integrated with respect to the topography-soils index to yield our large topography-soils distribution, and interval responses are weighted by the probability of occurrence of the interval. Grid square averaged land surface fluxes result. The model functions independently as a macroscale water balance model. Runoff ratio and evapotranspiration efficiency parameterizations are derived and are shown to depend on the spatial variability of the above mentioned properties and processes, as well as the dynamics of land surface-atmosphere interactions.

Famiglietti, J. S.↗

DOE OSTI2021

Impact of sodium vanadium oxide (NaV 3 O 8 , NVO) material synthesis conditions on charge storage mechanism in Zn-ion aqueous batteries

The electrochemical charge storage of sodium vanadate (NaV 3 O 8 or NVO) cathodes in aqueous Zn-ion batteries has been hypothesized to be influenced by the inclusion of structural water for facilitating ion transfer in the material. Materials properties considered important (morphology, crystallite and particle size, surface area) are systematically studied herein through investigation of two NVO materials, NaV 3 O 8 ·0.34H 2 O [NVO(300)] and NaV 3 O 8 ·0.05H 2 O [NVO(500)], with different water content, acicular morphologies with different size and surface area achieved via post-synthesis heat treatment. The electrochemistry of the two materials was evaluated in aqueous Zn-ion cells with 2 M ZnSO 4 electrolyte using cyclic voltammetry, galvanostatic cycling, and rate capability testing. Furthermore, the thinner NVO(300) nanobelts (0.13 μm) demonstrate greater specific capacities and higher effective diffusion coefficients relative to the thicker NVO(500) nanorods. Notably however, while cells containing NVO(500) deliver lower specific capacity, they demonstrate enhanced capacity retention with cycling. The structural changes accompanying oxidation and reduction are elucidated via ex situ X-ray diffraction, transmission electron microscopy, and operando V K-edge X-ray absorption spectroscopy (XAS), where NVO material properties are shown to influence the ion insertion. Operando XAS verified that electron transfer corresponds directly to change in vanadium oxidation state, affirming vanadium redox as the governing electrochemical process.

25 ENERGY STORAGE↗

DOE OSTI2025

Editorial: Functionalization of porous materials for sustainable energy applications

Global energy demands are shifting toward a more sustainable future, with the goal of achieving carbon neutrality by 2050. Emerging technologies are driving this transition. The industry, academia, government, non-profit organizations, and the broader community are collaboratively working to reduce greenhouse gas (GHG) emissions and address climate change to ensure a sustainable future. According to the International Energy Agency, in 2022, the production, transportation, and processing of oil and gas resulted in 5.1 billion tons of CO 2 -equivalent emissions, representing nearly 15% of all energy-related GHG emissions. Moreover, the end-use of oil and gas accounted for an additional 40% of emissions. The IEA’s Net Zero Emissions by 2050 Scenario calls for immediate, collective action from the industry, transportation and other stakeholders to mitigate these emissions. In this effort, the development of energy materials will play a critical role in reducing emissions. Among these, porous materials offer an innovative solution, leveraging their high surface area, adjustable pore sizes, and chemical versatility to address these pressing challenges effectively. By carefully designing their nanostructures, the architecture and properties of these materials can be tailored for specific applications. Key factors such as chemical composition, particle size, pore distribution, and surface area optimization enhance the reactivity and energy conversion efficiency. Additionally, pre- and post-functionalization processes can introduce targeted chemical properties, further improving their performance. This Research Topic explores recent advancements in energy and materials science through four scholarly papers, showcasing innovative solutions for sustainable energy technologies while providing valuable insights into the unique properties and structure of porous materials (Figure 1). Li et al. present their work on highly defective NiFeV layered triple hydroxides, highlighting enhanced electrocatalytic activity and stability for oxygen evolution reactions (OER). Kovalskii et al. contribute a mini-review on hydrogen storage using hexagonal boron nitride (h-BN) and BN-based materials, offering an insightful overview of these promising materials. Chava et al. discuss their recent achievements in ceramic electrolytes used for improvement of performance of solid-state batteries. Lastly, Li et al. review the properties of porous materials with a focus on shrinkage behavior during the drying process, shedding light on key considerations for material design.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Effect of cell compression on the performance and the structure of proton exchange membrane water electrolyzer (PEMWE) assembly

Here, in the field of water electrolysis, the proton exchange membrane water electrolyzer (PEMWE) is currently the most advanced technology for producing hydrogen without emitting CO 2 . Although PEMWE plants are already in operation, further research is needed to improve cell efficiency and reduce the use of rare materials, such as iridium oxide catalysts for the oxygen evolution reaction (OER). One of the main causes of performance loss in PEMWE is the relatively low electric conductivity of the porous transport layer (PTL) and of the anode catalyst layer, which results in ohmic losses and low catalyst utilization during high current density operation. The objective of this study is to investigate how optimization of the PTL and electrode interface can increase the cell performance. To this end, we tested different cell assemblies using fibrous and sintered PTLs, decreasing membrane thickness, reducing iridium loading, and inserting a microporous layer to increase contact surface area. Electrochemical characterization of each cell configuration was systematically performed at various compression levels as the pressure is a crucial parameter influencing the electrode/PTL contact area. In parallel, X-ray microcomputed tomography (micro-CT) was employed to investigate the effects of cell hydration and compression on the structure of PEMWE components. This study combining electrochemistry and micro-CT imaging presents how optimizing the electrode/PTL contact surface area, minimizes ohmic losses, and enables PEMWE operation with low iridium loading at high current densities.

Catalyst - PTL interface↗

NASA NTRS1991

Meteoroid and orbital debris record of the Long Duration Exposure Facility

The Long Duration Exposure Facility (LDEF) was recovered in January 1990 following 5.7 years exposure of approx. 130 square meters of surface area in low-Earth orbit (250-179 miles). Kennedy Space Center acquired data are currently being reduced to yield accurate impact crater depths and diameters. Presented here is a preliminary accounting of the impact record based on the approx. 15.4 square meter surface area of LDEF's 6061-T6 aluminum frame, which was exposed in 26 different directions.

Zolensky, Mike↗

NASA NTRS1991

Monolith catalysts for closed-cycle carbon dioxide lasers

The objective was to explore ways of making a monolithic form of catalyst for CO2 lasers. The approach chosen was to pelletize the catalyst material, Au/MnO2 powder, and epoxy the pellets to stainless steel sheets as structural supports. The CO oxidation reaction over Au/MnO2 powder was found to be first overall, and the reaction rate constant at room temperature was 4.4 +/- 0.3 cc/(g x sec). The activation energy was 5.7 kcal/mol. The BET surface area of the pellets was found to vary from 125 to 140 sq m/g between different batches of catalyst. Pellets epoxied to stainless steel strips showed no sign of fracture or dusting when subjected to thermal tests. Pellets can be dropped onto hard surfaces with chipping of edges but no breakage of the pellets. Mechanical strength tests performed on the pellets showed that the crush strength is roughly one-fourth of the pelletizing force. The apparent activity and activation energy over the pellets were found to be less than over the powdered form of the catalyst. The lower apparent activity and activation energy of the pellets are due to the fact that the internal surface area of a pellet is not exposed to the reactant concentration present in the flowing gas as a result of intrapellet diffusion resistance. Effectiveness factors varied from 0.44, for pellets having thickness of 2 mm and attached with epoxy to a stainless steel strip. The epoxy and the stainless steel strip were found to simply block off one of the circular faces of the pellets. The epoxy did not penetrate the pellets and block the active sites. The values of the effective diffusivities were estimated to be between 2.3 x 10(exp -3) and 4.9 x 10(exp -3) sq cm/s. With measurements performed on one powder sample and one pellet configuration, reasonable accurate predictions can be made of conversions that would be obtained with other pellet thickness and configurations.

Herz, Richard K.↗

NASA NTRS1957

Bodies of Revolution Having Minimum Drag at High Supersonic Airspeeds

Approximate shapes of nonlifting bodies having minimum pressure foredrag at high supersonic airspeeds are calculated. With the aid of Newton's law of resistance, the investigation is carried out for various combinations of the conditions of given body length, base diameter, surface area, and volume. In general, it is found that when body length is fixed, the body has a blunt nose; whereas, when the length is not fixed, the body has a sharp nose. The additional effect of curvature of the flow over the surface is investigated to determine its influence on the shapes for minimum drag. The effect is to increase the bluntness of the shapes in the region of the nose and the curvature in the region downstream of the nose. These shape modifications have, according to calculation, only a slight tendency to reduce drag. Several bodies of revolution of fineness ratios 3 and 5, including the calculated shapes of minimum drag for given length and base diameter and for given base diameter and surface area, were tested at Mach numbers from 2.73 to 6.28. A comparison of theoretical and experimental foredrag coefficients indicates that the calculated minimum-drag bodies are reasonable approximations to the correct shape.

Eggers, A J , Jr↗

NASA NTRS1995

KAO observations of SN1987A

Explosion calculations of SN1987A generate pictures of Rayleigh-Taylor fingers of radioactive Ni-56 (Ni-56 yields Co-56 yields Fe-56) which are boosted to velocities of several thousand km/s. From the KAO observations of the mid-IR iron lines, a picture of the iron in the ejecta emerges which is consistent with the 'frothy iron fingers' having expanded to fill about 50% of the metal-rich volume of the ejecta (nu(sub m) less than or equal to 2500 km/s). The ratio of the nickel line intensities I(sub (Ni I)7.5 micron)/I(sub (Ni II)6.6 microns) yields a high ionization fraction of x(sub Ni) greater than or equal to 0.9 in the volume associated with the iron-group elements at day 415, before dust condenses in the ejecta. From the KAO observations of the dust's thermal emission (2 microns to 100 microns), it is deduced that when the grains condense, their infrared radiation is trapped, their apparent opacity is gray, and they have a surface area filling factor of about 50%. The dust emission from SN1987A is featureless: no 9.7 micron silicate feature, nor PAH features, nor dust emission features of any kind are seen at any time. The total dust opacity increases with time even though the surface area filling factor and the dust/gas ratio remain constant. This suggests that the dust forms along coherent structures which can maintain their radial line-of-sight opacities, i.e., along fat fingers. The coincidence of the filling factor of the dust and the filling factor of the iron strongly suggests that the dust condenses within the iron, and therefore the dust is iron-rich. It only takes approximately 10(exp -4) solar mass of dust for the ejecta to be optically thick out to approximately 100 microns; a lower limit of 4 x 10(exp -4) solar mass of condensed grains exists in the metal-rich volume, but much more dust could be present. The episode of dust formation started at about 539 days and proceeded rapidly, so that by 600 days 45% of the bolometric luminosity was being emitted in the IR; by 775 days, 86% of the bolometric luminosity was being reradiated by the dust. Measurements of the bolometric luminosity of SN1987A from 1000 to 2300 days are based on 10 micron and 20 micron photometry and rely on the suppositions that the IR emission is a graybody (proven to be true by the KAO observations at 615 and 775 days) and that the dust temperature drops to and remainsat 150 K. The late-time bolometric luminosity is stronger than that expected from the radioactive decay of Co-56, Co-57, Ti-44, and Na-22 and the late-time dust temperatures are consistent with the presence of a compact object.

Wooden, Diane H.↗

NASA NTRS1994

Explosion Calculations of SN1087

Explosion calculations of SNT1987A generate pictures of Rayleigh-Taylor fingers of radioactive Ni-56 which are boosted to velocities of several thousand km/s. From the KAO observations of the mid-IR iron lines, a picture of the iron in the ejecta emerges which is consistent with the "frothy iron fingers" having expanded to fill about 50% of the metal-rich volume of the ejecta. The ratio of the nickel line intensities yields a high ionization fraction of greater than or equal to 0.9 in the volume associated with the iron-group elements at day 415, before dust condenses in the ejecta. From the KAO observations of the dust's thermal emission, it is deduced that when the grains condense their infrared radiation is trapped, their apparent opacity is gray, and they have a surface area filling factor of about 50%. The dust emission from SN1987A is featureless: no 9.7 micrometer silicate feature, nor PAH features, nor dust emission features of any kind are seen at any time. The total dust opacity increases with time even though the surface area filling factor and the dust/gas ratio remain constant. This suggests that the dust forms along coherent structures which can maintain their radial line-of-sight opacities, i.e., along fat fingers. The coincidence of the filling factor of the dust and the filling factor of the iron strongly suggests that the dust condenses within the iron, and therefore the dust is iron-rich. It only takes approximately 4 x 10(exp -4) solar mass of dust for the ejecta to be optically thick out to approximately 100 micrometers; a lower limit of 4 x 10(exp -4) solar mass of condensed grains exists in the metal-rich volume, but much more dust could be present. The episode of dust formation started at about 530 days and proceeded rapidly, so that by 600 days 45% of the bolometric luminosity was being emitted in the IR; by 775 days, 86% of the bolometric luminosity was being reradiated by the dust. Measurements of the bolometric luminosity of SN1987A from 1000 - 1800 days are based on 10 micrometers and 20 micrometers photometry and rely on the suppositions that the IR emission is a greybody (proven to be true by the KAO observations at 615 and 775 days) and that the dust temperature drops to and remains at 150 K. The late time bolometric luminosity is stronger than that expected from the radioactive decay of Co-56, Co-57, Ti-44, and Na-22 and the possibility of an embedded compact object will be discussed.

Wooden, Diane H.↗