SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Blackfeet Community College (BCC), under Topic Area 1.a. Energy Generating System(s), received funds to install solar photovoltaic (PV) systems to support four existing campus buildings. Blackfeet Community College seeks to bring renewable energy benefits to the Blackfeet Reservation Community.
Results of a statistical error analysis performed to determine the degree of uncertainty encountered when calibrating steerable receiving antennas with the solar calibration method. The analysis considers the propagation of precision error indices. It is shown that a worst-case one-sigma (1 sigma) uncertainty of plus or minus 0.8 dB in system noise temperature occurs for a solar calibration at L-band. Somewhat better precision can be achieved by monitoring the antenna gain-to-noise temperature ratio at a station; a worst-case uncertainty of plus or minus 0.5 dB (1 sigma) can be realized. An error analysis is made of a method to determine absolute antenna gain based upon solar flux density. The uncertainty in this type of measurement is plus or minus 0.7 dB (1 sigma) at L- and S-band frequencies.
In response to an emergency request, the mechanical properties of two complex laminate materials, used as thermal shields on the Skylab spacecraft, were investigated. Concern over the prolonged use of these materials in the space environment prompted this investigation. Shields made of both of these materials, popularly called the parasol and the sail types, were taken to the Skylab spacecraft by the original Skylab astronauts. Both were used to restore thermal control after the original control surfaces were damaged during launch. During the tests the tensile properties were measured at anticipated service temperature and after prolonged exposure to increasing degrees of ultraviolet radiation at intensities approaching two solar constants. Some samples received exposures equivalent to 2,350 hours. The performance and degradation of the two materials are presented in terms of orientation, vacuum, and degree of irradiation. In general, the 75-micron (3-mil) parasol laminate showed a decrease in tensile properties as a function of exposure time, while the 200-micron (8-mil) sail laminate was little affected by exposure to the ultraviolet radiation.
The 1976 Mars solar conjunction resulted in complete occultations of the Viking spacecraft by the sun at solar minimum. During the conjunction period, coherent 3.5- and 13-cm wavelength radio waves from the orbiters passed through the solar corona and were received with the 64-m antennas of the NASA Deep Space Network. Data were obtained within at least 0.3 and 0.8 R sub s of the photosphere at the 3.5- and 13-cm wavelengths, respectively. The data can be used to determine the plasma density integrated along the radio path, the velocity of density irregularities in the coronal plasma, and the spectrum of the density fluctuations in the plasma. Observations of integrated plasma density near the south pole of the sun generally agree with a model of the corona which has an 8:1 decrease in plasma density from the equator to the pole. Power spectra of the 3.5- and 13-cm signals at a heliocentric radial distance of about 2 R sub s have a 1/2 power width of several hundred hertz and vary sharply with proximate geometric miss distance. Spectral broadening indicates a marked progressive increase in plasma irregularities with decreasing ray altitude at scales between about 1 and 100 km.
The feasibility was evaluated of finding potential sites for Solar Power Satellite (SPS) receiving antennas (rectennas) in the continental United States, in sufficient numbers to permit the SPS to make a major contribution to U.S. generating facilities, and to give statistical validity to an assessment of the characteristics of such sites and their implications for the design of the SPS system. It is found that the cost-optimum power output of the SPS does not depend on the particular value assigned to the cost per unit area of a rectenna and its site, as long as it is independent of rectenna area. Many characteristics of the sites chosen affect the optimum design of the rectenna itself.
An empirical study was performed to evaluate the validity of various insolation models which employ either an isotropic or an anisotropic distribution approximation for sky light when predicting insolation on tilted surfaces. Data sets of measured hourly insolation values were obtained over a 6-month period using pyranometers which received diffuse and total solar radiation on a horizontal plane and total radiation on surfaces tilted toward the equator at 37 degrees and 60 degrees angles above the horizon. Data on the horizontal surfaces were used in the insolation models to predict insolation on the tilted surface; comparisons of measured vs calculated insolation on the tilted surface were examined to test the validity of the sky light approximations. It was found that the Liu-Jordan isotropic distribution model provides a good fit to empirical data under overcast skies but underestimates the amount of solar radiation incident on tilted surfaces under clear and partly cloudy conditions.
A high-altitude, unmanned, propeller-driven electric airplane is proposed for remote sensing of environmental phenomena. With motive power from surface-mounted solar arrays or microwave receivers, flight endurance of weeks to months could be anticipated. The proposed system offers unique capability for monitoring oceanic and atmospheric characteristics on local or regional scales. Coastal marine and tropospheric research activities, which require temporal resolutions of 2-72 hours, would be prime application areas. Potential missions might include the monitoring of ocean disposals, episodic marine biological events, and river/ocean interactions. Preliminary sizing and performance calculations are presented along with possible mission scenarios and payload complements.
Approximate slope error determined with minimal test equipment. Test Setup for Determining Slope Error for Point-Focusing Dish includes pinhole camera at center of curvature and color-coded target mounted around pinhole. Floodlights illuminate target to minimize exposure time. New procedure provides good approximation of reflector slope error and is excellent tool for comparative analysis of reflectors used as solar collectors for microwave receivers.
The Space Station will represent the first time that a solar dynamic power system will be used to generate electrical power in space. In a system such as this, sunlight is collected and focused by a solar concentrator onto the receiver of a heat engine which converts the energy into electricity. The concentrator must be capable of collecting and focusing as much of the incident sunlight as possible, and it must also withstand the atomic oxygen bombardment which occurs in low Earth orbit (LEO). This has led to the development of a system of thin film coatings applied to the concentrator facet surface in a chamber designed especially for this purpose. The system of thin film coatings employed gives both the necessary degree of reflectance and the required protection from the LEO atomic oxygen environment.
A major consequence of ozone depletion is an increase in solar ultraviolet (UV) radiation received at the Earth's surface. This chapter discusses advances that were made since the previous assessment (World Meteorological Organization (WMO)) to our understanding of UV radiation. The impacts of these changes in UV on the biosphere are not included, because they are discussed in the effects assessment.
To test and evaluate suitability of materials for use in space power systems and related space and commercial applications, and to achieve sufficient understanding of the mechanisms by which, the materials perform in their intended applications. Materials and proposed applications included but were not limited to: Improved anodes for lithium ion batteries, highly-transparent arc-proof solar array coatings, and improved surface materials for solar dynamic concentrators and receivers. Cooperation and interchange of data with industrial companies as appropriate.
Multi-Layer Insulation (MLI) returned during Servicing Mission 4 are still being analyzed. Analysis has revealed degradation of optical, thermal, and mechanical properties, increased crystallinity, and reduction in fluorine/carbon ratio of aluminized-Teflon fluorinated ethylene propylene (Al-FEP) FEP. These material properties can be affected by high temperatures on orbit, increased radiation exposure, and in some cases contamination from materials in close proximity to the insulation on orbit. Preliminary results support conclusions of previous studies: areas of Al-FEP that received higher levels of solar exposure show more degradation (high temperatures and radiation combined).
For more than 50 years, scientists have discussed the possibility of the existence of water ice and other frozen volatiles at the lunar poles [1]. However, it was not until the 1990s when the polar orbiting spacecraft Clementine and Lunar Prospector collected data supporting these hypotheses [2]. Subsequent missions, including the Lunar Reconnaissance Orbiter (LRO) mission [3], and the Lunar Crater Observation and Sensing Satellite (LCROSS) mission [4], provided further evidence that supports the existence of water ice deposits at the lunar poles. During NASA's Constellation Program, several areas at both lunar poles polar were included in 50 Regions of Interest (ROI) for intensive study by the Lunar Reconnaissance Orbiter Camera (LROC) [5]. These polar ROI focused on peaks and craters rims that received high amounts of solar illumination, assuming initial missions back to the lunar surface would utilize solar arrays to generate electricity. Recently, the successful demonstration of NASA's Kilopower Project at the National Nuclear Security Administration (NNSA) Nevada National Security Site makes it possible to consider lunar polar missions at locations other than highly illuminated regions. The Kilopower Project was initiated in 2015 to demonstrate subsystem-level technology readiness of a small space fission power system [6]. This abstract describes the science objectives and operations for a mission concept developed at NASA Glenn Research Center's COMPASS Concurrent Engineering Team for a 1-year exploration of Peary Crater focused on prospecting for lunar polar volatiles.
The surface of asteroid Bennu changes over time because of impacts, mass movement, and particle ejections [1-4]. The OSIRIS-REx samples were collected from a 20-m-diameter crater on Bennu called Hokioi. One of the driving hypotheses of the mission is that Hokioi is part of a population of small (<25 m) craters that are less than 0.1 Myr old and contain relatively unweathered material [1,4]. Our goal is to understand the recent surface exposure history of Bennu, utilizing radionuclides (10Be, 26Al, 36Cl, 41Ca) produced by both galactic and solar cosmic rays. We received ~12 mg of aggregate sample OREX-803014-0. We picked five of the larger particles with masses ranging from 0.24 to 0.68 mg. We dissolved each particle, along with 0.15 mg Be and 1.0 mg Cl carrier, in HF/HNO3 mixture, and did the same for the remaining aggregate sample of 9.8 mg. After dissolution, we took a small aliquot for chemical analysis, added 0.7 mg of Al carrier, and separated Be, Al, and Cl for analysis of cosmogenic 10Be, 26Al, and 36Cl by accelerator mass spectrometry [5]. Preliminary 26Al results show concentrations of 21–27 dpm/kg for the Bennu samples, with an average of 22.5 ± 0.6 dpm/kg for the five particles and 21.1 ± 0.7 dpm/kg for the remaining aggregate. These values are close to the expected 26Al saturation values of 25–30 dpm/kg for the top 1 m of Bennu’s regolith, suggesting a minimum exposure age of 1.5–2.0 Myr near the surface. Our initial Bennu results also resemble those found for Ryugu samples [6,7]; thus, we can hypothesize that the two asteroids have had similar surface exposure histories.
A solar cycle statistical model has been developed based on the accumulating cycle sunspot data to estimate future levels of the solar cycle activity. Since the current solar cycle 24 has progressed about three years, the cycle activity levels are estimated with an accurately defined solar minimum 24. Then, solar cycle 24 is projected with the cycle activity levels using the statistical model. The projection of solar cycle 24 is then coupled to space related quantities of interest to radiation protection, because the interplanetary plasma and radiation fields are modulated by the degree of disturbance in the solar surface and the radiation doses received by astronauts in interplanetary space are likewise influenced. The resultant projection of solar cycle 24 provides a basis for estimating exposure in future space missions, and projection errors can be corrected as the cycle progresses and observations become available because this model is shown to be self-correcting.
Lenses project solar image onto aperature to exclude circumsolar radiation, more precisely measuring energy captured by receiver aperatures of highly-concentrating solar thermal-energy converters. First version uses achromatic objective lens to form image of Sun at aperature ahead of radiometer cavity. Smaller second version with shorter focal length forms image magnified by another lens and thrown onto aperature. Both Versions require calibration against standard radiometer.
Twenty thin film specimens were flown on M1SSE-5 as a cooperative effort between several organizations. This presentation will report results of initial inspections and post-flight measurements of the optical properties and recession of these materials due to the approx.13 month exposure period on the exterior of the International Space Station. These specimens were located on the "anti-solar" side of the MISSE-5 container and received a low number of Equivalent Sun Hours of solar UV exposure. Profilometry and/or ATF measurements will be conducted to determine thickness changes and atomic oxygen-induced recession rates Six of the specimens were covered with thin Kapton films, 0.1 and 0.3 mil in thickness. The 0.1 mil Kapton was almost completely eroded, suggesting that the atomic oxygen fluence is <8 x 10(exp 19) atoms/sq cm, similar to levels experienced during Space Shuttle materials experiments in the 1980's and 1990's. A comparison of results from MISSE-5 and Space Shuttle experiments will be included for those materials common to both the short and long-term exposures.
Monte Carlo transport calculations estimating solar flare proton radiation dose received by travelers during supersonic flight