Search NASA⌕ Search

SEARCH · Search NASA

Results for “Support effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Crystallographich phase transition and island height selection in In/Si(111) growth

In/Si(111) has been studied with spot profile analysis low-energy electron diffraction, scanning tunneling microscope, and first-principles total energy calculations to identify its growth morphology at low temperatures. Of the different substrate interfaces used, only In growth on Si(111)- Pb-{alpha}-{radical}3 x {radical}3 has resulted in uniform height fcc (111) four-layer islands. A transition to the bulk bct (101) oriented islands is favored at higher temperatures T>250K and/or larger coverages {Theta} > 5ML. These results suggest two stabilizing effects for the preferred morphologies, i.e., quantum size effects and orientation dependent surface and interface energies. These stabilizing effects are supported from first-principles calculations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface oxygenation induced strong interaction between Pd catalyst and functional support for zinc–air batteries

Employing the strong metal-support interaction (SMSI) effect for promoting the catalyst's activity toward the oxygen reduction reaction (ORR) is promising due to the electronic structure optimization and high utilization efficiency of platinum group metal (PGM) catalysts. Metal oxides as alternative supports for PGMs facilitate intrinsic activity and improve durability as compared to conventional carbon supports. However, the restricted mass and electron transfer at the metal/support interface need to be addressed. Herein, to strengthen the interaction at the metal/support interfaces and improve the utilization efficiency of PGM, an ultralow loading of Pd was embedded in a surface-oxygenated PdNiMnO porous film. The Mn-doping was designed to promote surface oxygenation using a facile anodization process that created sufficiently exposed interfaces between Pd and the support, strengthening the SMSI effects at the Pd/oxygenated support interface for enhancing ORR performance. Furthermore, the Ni-containing oxygenated catalyst served as both the active component for the oxygen evolution reaction (OER) and the functional support for stabilizing Pd, making PdNiMnO a bifunctional catalyst for zinc–air flow batteries (ZAFB). As a proof-of-concept, the ZAFB (PdNiMnO) shows a maximal power density of 211.6 mW cm –2 and outstanding cycling stability for over 2000 h with a minimal voltage gap of 0.69 V at a current density of 10 mA cm –2 , superior to the state-of-the-art catalysts.

25 ENERGY STORAGE↗

Effect of Enhanced Thermal Stability of Alumina Support Layer on Growth of Vertically Aligned Single-Walled Carbon Nanotubes and Their Application in Nanofiltration Membranes

We investigate the thermal stability of alumina supporting layers sputtered at different conditions and its effect on the growth of aligned single-walled carbon nanotube arrays. Radio frequency magnetron sputtering of alumina under oxygen–argon atmosphere produces a Si-rich alumina alloy film on a silicon substrate. Atomic force microscopy on the annealed catalysts reveals that Si-rich alumina films are more stable than alumina layers with low Si content at the elevated temperatures at which the growth of single-walled carbon nanotubes is initiated. The enhanced thermal stability of the Si-rich alumina layer results in a narrower (< 2.2 nm) diameter distribution of the single-walled carbon nanotubes. Thanks to the smaller diameters of their nanotube pores, membranes fabricated with vertically aligned nanotubes grown on the stable layers display improved ion selectivity.

36 MATERIALS SCIENCE↗

Spectroscopic determination of metal redox and segregation effects during CO and CO/NO oxidation over silica-supported Pd and PdCu catalysts

Here, we report the effects of alloying Cu into silica supported Pd nanoparticles on the catalytic activity, surface composition, and particle structure during CO oxidation Pd is highly active for CO oxidation but is inhibited by relevant competitive reagents (e.g. NO) at low temperatures (< 150 °C). By alloying Cu into Pd nanoparticles, NO inhibition is suppressed without any CO oxidation activity loss. Infrared spectroscopy illustrates the formation of surface nitrosyl (NO-Pd) is eliminated in the PdCu alloy catalyst, preventing CO oxidation inhibition by NO. X-ray absorption spectroscopy studies show that Pd in the monometallic catalyst forms a surface oxide after light-off. Conversely, in the PdCu catalyst, Pd remains metallic during reaction, independent of temperature, whereas the Cu oxidizes when the catalyst becomes active, after light-off. Furthermore, DRIFTS studies show that the Cu segregates to the surface as the catalyst becomes active for diesel oxidation, presumably becoming the O 2 adsorption site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automatic Rural Road Centerline Detection and Extraction from Aerial Images for a Forest Fire Decision Support System

To effectively manage the terrestrial firefighting fleet in a forest fire scenario, namely, to optimize its displacement in the field, it is crucial to have a well-structured and accurate mapping of rural roads. The landscape’s complexity, mainly due to severe shadows cast by the wild vegetation and trees, makes it challenging to extract rural roads based on processing aerial or satellite images, leading to heterogeneous results. This article proposes a method to improve the automatic detection of rural roads and the extraction of their centerlines from aerial images. This method has two main stages: (i) the use of a deep learning model (DeepLabV3+) for predicting rural road segments; (ii) an optimization strategy to improve the connections between predicted rural road segments, followed by a morphological approach to extract the rural road centerlines using thinning algorithms, such as those proposed by Zhang–Suen and Guo–Hall. After completing these two stages, the proposed method automatically detected and extracted rural road centerlines from complex rural environments. This is useful for developing real-time mapping applications.

Lourenço, Miguel (ORCID:0000000157673394)↗

Social support and cognitive function in Chinese older adults who experienced depressive symptoms: is there an age difference?

Objective This study examined the moderating effect of overall social support and the different types of social support on cognitive functioning in depressed older adults. We also investigated whether the moderating effect varied according to age. Methods A total of 2,500 older adults (≥60 years old) from Shanghai, China were enrolled using a multistage cluster sampling method. Weighted linear regression and multiple linear regression was utilized to analyze the moderating effect of social support on the relationship between depressive symptoms and cognitive function and to explore its differences in those aged 60–69, 70–79, and 80 years and above. Results After adjusting for covariates, the results indicated that overall social support (β = 0.091, p = 0.043) and support utilization (β = 0.213, p < 0.001) moderated the relationship between depressive symptoms and cognitive function. Support utilization reduced the possibility of the cognitive decline in depressed older adults aged 60–69 years (β = 0.310, p < 0.001) and 80 years and above (β = 0.199, p < 0.001), while objective support increased the possibility of cognitive decline in depressed older people aged 70–79 years (β = −0.189, p < 0.001). Conclusion Our findings highlight the buffering effects of support utilization on cognitive decline in depressed older adults. We suggest that age-specific measures should be taken when providing social support to depressed older adults in order to reduce the deterioration of cognitive function.

Jing, Yurong↗

Multiple pathways link urban green- and bluespace to mental health in young adults

Highlights: • Green/bluespace might support mental health. • We examined pathways underlying the effect. • Increased greenspace supported mental health through indirect pathways. • Bluespace was not clearly associated with mental health. A growing body of scientific literature indicates that urban green- and bluespace support mental health; however, little research has attempted to address the complexities in likely interrelations among the pathways through which benefits plausibly are realized.

54 ENVIRONMENTAL SCIENCES↗

Chemical Potential of Metal Atoms in Supported Nanoparticles: Dependence upon Particle Size and Support

Metal nanoparticles supported on oxide surfaces form the basis for many industrial catalysts and promise to play an ever-increasing role in future energy and environmental technologies. The chemical potential (μ) of the metal atoms in these particles depends strongly on particle size and support and is an important factor that determines their catalytic properties, including their binding strengths to adsorbed reaction intermediates and their long-term stability against sintering. We present here a method for estimating this chemical potential as a function of particle size for different metal/oxide combinations. We show that this chemical potential for late transition metals is well approximated for a particle of diameter D by μ( D ) = [(3γ m – E adh )(1 + D o / D )](2 V m / D ), where γ m is the surface energy of the bulk metal, E adh is the adhesion energy at the bulk metal/oxide interface, and D o is ~1.5 nm, and V m is the molar volume of the bulk metal. We further show that E adh increases with (1) increasing heat of formation of the most stable oxide of the metal from metal gas atoms plus O 2 (gas) per mole of metal atoms, (2) decreasing enthalpy of reduction of the oxide to its next lower oxidation state plus O 2 (gas), per mole of oxygen atoms, and (3) increasing density of surface oxygen atoms on the oxide surface. The linear scaling of E adh with these properties allows estimations of E adh for a variety of metal/oxide combinations. Using this E adh estimate in the above equation with known values for γ m allows estimates of metal chemical potential versus particle size for late transition metals on various oxide supports. WE conclude this will improve our ability to understand structure–property relations in catalysis and design better catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing the Carbon Monoxide Oxidation Performance through Surface Defect Enrichment of Ceria-Based Supports for Platinum Catalyst

Effective synthesis and application of single-atom catalysts on supports lacking enough defects remain a significant challenge in environmental catalysis. Herein, we present a universal defect-enrichment strategy to increase the surface defects of CeO 2 -based supports through H 2 reduction pretreatment. The Pt catalysts supported by defective CeO 2 -based supports, including CeO 2 , CeZrO x , and CeO 2 /Al 2 O 3 (CA), exhibit much higher Pt dispersion and CO oxidation activity upon reduction activation compared to their counterpart catalysts without defect enrichment. Specifically, Pt is present as embedded single atoms on the CA support with enriched surface defects (CA-HD) based on which the highly active catalyst showing embedded Pt clusters (Pt C ) with the bottom layer of Pt atoms substituting the Ce cations in the CeO 2 surface lattice can be obtained through reduction activation. Embedded PtC can better facilitate CO adsorption and promote O 2 activation at Pt C –CeO 2 interfaces, thereby contributing to the superior low-temperature CO oxidation activity of the Pt/CA-HD catalyst after activation.

36 MATERIALS SCIENCE↗

Geo-temporal patterns to design cost-effective interventions for zoonotic diseases -the case of brucellosis in the country of Georgia

Control of zoonosis can benefit from geo-referenced procedures. Focusing on brucellosis, here the ability of two methods to distinguish disease dissemination patterns and promote cost-effective interventions was compared. Geographical data on bovine, ovine and human brucellosis reported in the country of Georgia between 2014 and 2019 were investigated with (i) the Hot Spot (HS) analysis and (ii) a bio-geographical (BG) alternative. More than one fourth of all sites reported cases affecting two or more species. While ruminant cases displayed different patterns over time, most human cases described similar geo-temporal features, which were associated with the route used by migrant shepherds. Other human cases showed heterogeneous patterns. The BG approach identified small areas with a case density twice as high as the HS method. The BG method also identified, in 2018, a 2.6–2.99 higher case density in zoonotic (human and non-human) sites than in non-zoonotic sites (which only reported cases affecting a single species) –a finding that, if corroborated, could support cost-effective policy-making. Three dissemination hypotheses were supported by the data: (i) human cases induced by sheep-related contacts; (ii) human cases probably mediated by contaminated milk or meat; and (iii) cattle and sheep that infected one another. This proof-of-concept provided a preliminary validation for a method that may support cost-effective interventions oriented to control zoonoses. To expand these findings, additional studies on zoonosis-related decision-making are recommended.

60 APPLIED LIFE SCIENCES↗

Accurate Effective Stress Measures: Predicting Creep Life for 3D Stresses Using 2D and 1D Creep Rupture Simulations and Data

Operating structural components experience complex loading conditions resulting in 3D stress states. Current design practice estimates multiaxial creep rupture life by mapping a general state of stress to a uniaxial creep rupture correlation using effective stress measures. The data supporting the development of effective stress measures are nearly always only uniaxial and biaxial, as 3D creep rupture tests are not widely available. This limitation means current effective stress measures must extrapolate from 2D to 3D stress states, potentially introducing extrapolation error. In this work, we use a physics-based, crystal plasticity finite element model to simulate uniaxial, biaxial, and triaxial creep rupture. Here, we use the virtual dataset to assess the accuracy of current and novel effective stress measures in extrapolating from 2D to 3D stresses and also explore how the predictive accuracy of the effective stress measures might change if experimental 3D rupture data was available. We confirm these conclusions, based on simulation data, against multiaxial creep rupture experimental data for several materials, drawn from the literature. The results of the virtual experiments show that calibrating effective stress measures using triaxial test data would significantly improve accuracy and that some effective stress measures are more accurate than others, particularly for highly triaxial stress states. Results obtained using experimental data confirm the numerical findings and suggest that a unified effective stress measure should include an explicit dependence on the first stress invariant, the maximum tensile principal stress, and the von Mises stress.

36 MATERIALS SCIENCE↗

Risk-Informed MultiPphysics BestEestimate Plus Uncertainties (BEPU) Application Development of RELAP5-3D Perturbation Model

The United States nuclear industry is facing a strong challenge to ensure maximum safety while enhancing economic benefit. Safety is a key parameter to all aspects related to light water reactor (LWR) nuclear power plants (NPPs), especially cost savings. Since the goal is to extend the lifetimes of these NPPs, the traditional deterministic safety concept may not guarantee a current economic asset. The Light Water Reactor Sustainability (LWRS) Program has been promoting a wide range of research and development (R&D) in this field to maximize the safety, economics, and performance of these NPPs through improved scientific understanding. One of the best practices to achieve this goal is to identify and optimize safety margins, which can lead to cost reduction. To do this, under the LWRS framework, the Risk-Informed Systems Analysis (RISA) Pathway will focus on the optimization of safety margin and minimization of uncertainties to ensure both safety and economics at the highest level. The RISA Pathway will provide enhanced capabilities for analyzing and characterizing LWR systems performance by developing and demonstrating methods, tools, and data to enable risk-informed margins management (RIMM). The goals of the RISA Pathway are twofold: (1) deploy the risk-informed tools and methods that enable better representation of safety margins and factors that contribute to cost and safety; and (2) conduct advanced risk assessment applications with industry to support margin management strategies that enable more cost-effective plant operation. The tools and methods provided by the RISA Pathway will support effective margin management for both active and passive safety systems, structures, and components (SSC) of an NPP. The tools and methods used in the RISA Pathway should have high confidence and highest technical maturity for and implementation to industry at its current setting. They should also have a capability to support risk-informed decision making for both probabilistic and deterministic elements of safety. The RISA Pathway will, therefore, perform a comprehensive assessment of verification and validation (V&V) status of RISA Toolkit to enhance credibility RISA Toolkit which be used by industry. This report summarizes RELAP5-3D development activities for best estimated and uncertainty (BEPU) capability to support ongoing RISA Pathway pilot projects for risk informed uncertainty quantification applications. Work scope includes (1) development of initial perturbation model for selected closure laws and (2) testing of suitable probability distribution functions (PDF) for the selected correlations. Developed BEPU modules are tested with selected separate effect cases and compared with conventional thermal-hydraulics model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Direct non-oxidative methane coupling on vitreous silica supported iron catalysts

Direct non-oxidative methane coupling (NMC) is one of the promising pathways for methane upgrading into value-added olefin and aromatic hydrocarbons. The silica-supported iron (i.e., Fe/SiO 2 ) catalyst has been reported effective for NMC, but the effects of silica support on the catalyst property and NMC performance have rarely been explored. Here, in this work, we prepared a vitreous silica-supported iron (Fe/SiO 2 -V) catalyst by flame fusion of a mixture of quartz silica and fayalite. The physicochemical properties and NMC performance of the as-prepared catalysts were measured. Compared to crystalline cristobalite support in Fe/SiO 2 catalyst that has been studied previously, vitreous silica support has disordered Si-O bonds and structural defects, enabling better iron dispersion and more vital metal-support interaction. The as-prepared Fe/SiO 2 -V catalyst had a shorter induction period in methane activation and lower coke yield in NMC. The increase in iron concentration in Fe/SiO 2 -V catalysts elongated the catalyst induction period and promoted aromatics and coke formation. The coke type of the spent Fe/SiO 2 -V catalyst is more uniform than the cristobalite-supported iron catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Silica Support in Phosphoric Acid Catalyzed Production of p -Xylene from 2,5-Dimethylfuran and Ethylene

p-Xylene is a commodity chemical of industrial importance for terephthalic acid production, for which renewable sourcing from naturally abundant lignocellulosic biomass is highly desired. Previous work demonstrated that phosphoric acid stabilized on siliceous zeolite supports (e.g., P-BEA, P-SPP) exhibits high selectivity toward p-xylene (>97%) from 2,5-dimethylfuran (DMF) and ethylene. However, the effect of the support and the contribution of heterogeneous versus homogeneous phosphoric acid on the observed catalytic behavior in the solvated reaction system have not been addressed. Here, we determine the phosphoric acid catalytic activity for DMF conversion and its selectivity to p-xylene when it is supported on a silica support as well as in the absence of a support. Specifically, phosphoric acid catalysis was studied in three different scenarios: (1) phosphoric acid was added in the liquid reaction mixture in the absence of any solid support, (2) phosphoric acid was added in the liquid reaction mixture along with inert silica support including siliceous zeolite (i.e., allowing for phosphoric acid–support assembly to proceed in the reaction mixture), and (3) phosphoric acid was first impregnated on the siliceous zeolite support and then the preassembled supported phosphoric acid catalyst was added in the liquid reaction mixture. We found that the reaction rate and selectivity to p-xylene are different in the above scenarios reflecting the effect of the solid support on the catalytic performance of phosphoric acid. In scenario 1, a low concentration of phosphoric acid (1.7 mM) in the absence of any solid support exhibited high selectivity to p-xylene (80% selectivity to p-xylene at 60% conversion of DMF), which decreased with increasing acid concentration. The selectivity to p-xylene and activity of phosphoric acid significantly increased by adding a silica support into the reaction system (scenario 2). Furthermore, this improvement was attributed to phosphoric acid partial association with the surface of the silica support under the reaction conditions (in situ catalyst assembly). Phosphoric acid predeposited on siliceous zeolite supports (e.g., P-BEA, P-SPP) synthesized via impregnation prior to the reaction (scenario 3) catalyzed the reaction heterogeneously without noticeable leaching and exhibited the highest activity and selectivity to p-xylene, suggesting an important role of the silica support and the need to ensure that phosphoric acid acts as a heterogeneous catalyst in order to accomplish selective conversion of DMF to p-xylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of verification and validation status - RELAP5-3D and RAVEN

The United States nuclear industry is facing a strong challenge to ensure maximum safety while enhancing economic benefit. Safety is a key parameter to all aspects related to light water reactor (LWR) nuclear power plants (NPPs), especially cost savings. Since the goal is to extend the lifetimes of these NPPs, the traditional deterministic safety concept may not guarantee a current economic asset. The Light Water Reactor Sustainability (LWRS) Program has been promoting a wide range of research and development (R&D) in this field to maximize the safety, economics, and performance of these NPPs through improved scientific understanding. One of the best practices to achieve this goal is to identify and optimize safety margins, which can lead to cost reduction. To do this, under the LWRS framework, the Risk-Informed Systems Analysis (RISA) Pathway will focus on the optimization of safety margin and minimization of uncertainties to ensure both safety and economics at the highest level. The RISA Pathway will provide enhanced capabilities for analyzing and characterizing LWR systems performance by developing and demonstrating methods, tools, and data to enable risk-informed margins management (RIMM). The goals of the RISA Pathway are twofold: (1) deploy the risk-informed tools and methods that enable better representation of safety margins and factors that contribute to cost and safety; and (2) conduct advanced risk assessment applications with industry to support margin management strategies that enable more cost-effective plant operation. The tools and methods provided by the RISA Pathway will support effective margin management for both active and passive safety systems, structures, and components (SSC) of an NPP. The tools and methods used in the RISA Pathway should have high confidence and highest technical maturity for and implementation to industry at its current setting. They should also have a capability to support risk-informed decision making for both probabilistic and deterministic elements of safety. The RISA Pathway will, therefore, perform a comprehensive assessment of verification and validation (V&V) status of RISA Toolkit to enhance credibility RISA Toolkit which be used by industry. This report summarizes assessment technical maturity of RISA thermal-hydraulics accident analysis code RELAP5-3D and multi-purpose probabilistic risk analysis tool RAVEN V&V status including specific information of the tool such as capability and features, quality assurance program, developer/independent V&V record, separation/integral tests history, user documents, and feedback.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hydrogen production through the water-gas shift reaction: thermodynamic equilibrium versus experimental results over supported Ni catalysts

This paper discusses the experimental results of the water-gas shift reaction over supported nickel catalysts in comparison to thermodynamic equilibrium composition at the same reaction conditions. The effects of different supports on the performance of H{sub 2} production over nickel-supported catalysts are also evaluated at both low and high temperatures. Ceria-promoted nickel catalyst supported on powder alumina (Ni/CeO{sub 2}-Al{sub 2}O{sub 3}) demonstrated excellent performance. The catalyst was not stable at low temperature (250{sup o}C) but showed good stability at high temperature (450{sup o}C). At 450{sup o}C, with a catalyst loading of 0.05 g, CO/S (S = steam) ratio of 1:3, and gas hourly space velocity (GHSV) - 200 L h{sup -1} g{sub cat}{sup -1}, the activity of Ni/CeO{sub 2}-Al{sub 2}O{sub 3} was 95% with a H{sub 2} yield of 52% and a H{sub 2} selectivity of 73%.

01 COAL, LIGNITE, AND PEAT↗

Stable organic field-effect-transistors with high mobilities unaffected by supporting dielectric based on phenylene-bridged thienobenzothiophene

We report on the electrical properties of organic field-effect transistors (OFET) based on a new class of organic semiconductors. The molecules consist of the same thieno[2,3-b][1]benzothiophene building blocks, connected by different π-bridge spacers (ethylene, phenylene, and fluorophenylene). Molecular orbitals and highest occupied molecular orbital/lowest unoccupied molecular orbital energies were calculated and compared with results from cyclic voltammetric and UV-vis absorption measurements. In order to study the influence of the bridge groups on the molecular arrangement and surface interaction, the transistor performance on a wide range of dielectrics has been investigated in detail. These include as grown SiO{sub 2} and Al{sub 2}O{sub 3} and also treated with octadecyltrichrolosilane and octadecylphosphonic acid, as well as Cytop and Parylene C. An extended study of the multitude of combinations of these materials revealed mobilities up to ∼1 cm{sup 2}/Vs, measured for devices made of the phenylene-bridged compound. Surprisingly, the mobility was quite independent of the supporting gate dielectric. Stability over time has been observed with no degradation after 5 months. By eliminating the hysteresis using Cytop, we were able to show that some of the molecules form films without long-term charge carrier trapping. These are interesting features for practical industrial processing of organic electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗