Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface coverage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Turbulent boundary layer on a full-coverage film-cooled surface: An experimental heat transfer study with normal injection

Heat transfer behavior was studied in a turbulent boundary layer with full-coverage film cooling through an array of discrete holes and with injection normal to the wall surface. Stanton numbers were measured for a staggered hole pattern with pitch-to-diameter ratios of 5 and 10, an injection mass flux ratio range of 0.1 to 1.0, and a range of Reynolds number 170 thousand to 5 million. Air was used as the working fluid with the mainstream velocity varied from .14 to 33.5 m/sec (30 to 110 ft/sec). The data were taken for secondary injection temperatures equal to the wall temperature and also equal to the mainstream temperature. By use of linear superposition theory, the data may be used to obtain Stanton number as a continuous function of the injectant temperature. The heat transfer coefficient is defined on the basis of a mainstream-to-wall temperature difference. This difinition permits direct comparison of performance between film cooling and transpiration cooling.

Choe, H.↗

Surface species formed by the adsorption and dissociation of water molecules on Ru(0001) surface containing a small coverage of carbon atoms studied by scanning tunneling microscopy

The adsorption and dissociation of water on a Ru(0001) surface containing a small amount ({le} 3 %) of carbon impurities was studied by scanning tunneling microscopy (STM). Various surface species are formed depending on the temperature. These include molecular H{sub 2}O, H{sub 2}O-C complexes, H, O, OH and CH. Clusters of either pure H{sub 2}O or mixed H{sub 2}O-OH species are also formed. Each of these species produces a characteristic contrast in the STM images and can be identified by experiment and by ab initio total energy calculations coupled with STM image simulations. Manipulation of individual species via excitation of vibrational modes with the tunneling electrons has been used as supporting evidence.

36 MATERIALS SCIENCE↗

Mercury Adsorption on Minerals and Its Effect on Microbial Methylation

Adsorbed or solid-phase inorganic mercury [Hg(II)] is commonly assumed immobile or less bioavailable for microbial uptake, although recent studies suggest that mineral-adsorbed Hg(II) is at least partially available for cell uptake and methylation. This study examined the adsorption of Hg(II) onto two reference minerals, hematite and montmorillonite, and evaluated Hg(II) uptake and methylation by a sulfate-reducing bacterium Desulfovibrio desulfuricans ND132 in laboratory incubations. Mineral-adsorbed Hg(II) on both hematite and montmorillonite was not only available for cell uptake and methylation but also resulted in a 2–3-fold increased methylmercury production compared to the mineral-free incubation. An optimal Hg(II) methylation was observed at a low to moderate mineral/solution ratio (1–5 g L–1) with fixed Hg(II) (25 nM) and cell concentrations. The result could be explained by decreased cellular immobilization of Hg(II) but enhanced close interactions between Hg(II) and cells both adsorbed or concentrated on mineral surfaces, leading to increased methylation. However, a high mineral/solution ratio inhibited Hg(II) methylation, likely as a result of a low Hg(II) coverage (per surface area) at high mineral loadings, which limit close contacts between Hg(II) and the cells. These results indicate that mineral-adsorbed Hg(II) may be directly available for microbial uptake or methylation, although whether the adsorption enhances or inhibits Hg(II) methylation may depend upon microniches, where Hg(II), microbes, and minerals co-exist in the natural environment. We suggest that future studies are performed to establish quantitative relationships of bioavailable Hg(II) with not only the dissolved but also adsorbed Hg(II) species to improve model predictions of Hg(II) fate and transformations.

Zhao, Linduo↗

Excitability in the H{sub 2}+O{sub 2} reaction on a Rh(110) surface induced by high coverages of coadsorbed potassium

By means of photoemission electron microscopy as spatially resolving method, the effect of high coverages of coadsorbed potassium (0.16 ≤ θ{sub K} ≤ 0.21) on the dynamical behavior of the H{sub 2} + O{sub 2} reaction over a Rh(110) surface was investigated. We observe that the originally bistable system is transformed into an excitable system as evidenced by the formation of target patterns and spiral waves. At K coverages close to saturation (θ{sub K} ≈ 0.21) mass transport of potassium with pulses is seen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth and structural evolution of Sn on Ag(001): Epitaxial monolayer to thick alloy film

The growth and structure of Sn on Ag(001), from submonolayer to thick film coverages at room temperature, are studied using low energy electron diffraction, x-ray photoemission spectroscopy and angle-resolved photoemission spectroscopy (ARPES) techniques. The authors observe different growth modes for submonolayer Sn coverages and for higher Sn coverages. Systematic surface structural evolution, consistent with the substitution of surface Ag atoms by Sn atoms, is observed for submonolayer Sn coverages while an ordered Ag-Sn bulk alloy film is formed for higher Sn coverages with an Ag overlayer. For monolayer coverage of Sn, a pseudomorphic growth of a Sn layer without alloying is determined. ARPES results also confirm the presence of an ordered Ag overlayer on the bulk Ag-Sn alloy film, suggesting the formation of an Ag/Ag{sub 3}Sn/Ag(001) sandwich structure at the surface for higher Sn coverages. The present results illustrate the complex interplay of atomic mobilities, surface free-energies, and alloy formation energies in determining the growth and structural properties of the system.

36 MATERIALS SCIENCE↗

Adsorption of V on a Hematite (0001) Surface and its Oxidation: Monolayer Coverage

The adsorption of a monolayer of V on idealized Fe- and oxygen-terminated hematite (0 0 0 1) surfaces and subsequent oxidation under atomic O adsorption are studied by density functional theory. Theoretical results are compared with X-ray surface standing wave and X-ray photoelectron spectroscopic measurements, and interpreted in the light of data on sub-monolayer coverages. Near-surface Fe reduction under V adsorption and accompanying structural relaxation are examined. These effects and subsequent response to oxidation, are found to be highly site specific. A full monolayer of oxygen leads to a V{sup 5+} state and reoxidation of subsurface Fe to the trivalent state, seen in both theory and experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ synchrotron radiation photoelectron spectroscopy study of the oxidation of the Ge(100)-2 × 1 surface by supersonic molecular oxygen beams

In situ synchrotron radiation photoelectron spectroscopy was performed during the oxidation of the Ge(100)-2 × 1 surface induced by a molecular oxygen beam with various incident energies up to 2.2 eV from the initial to saturation coverage of surface oxides. The saturation coverage of oxygen on the clean Ge(100) surface was much lower than one monolayer and the oxidation state of Ge was +2 at most. This indicates that the Ge(100) surface is so inert toward oxidation that complete oxidation cannot be achieved with only pure oxygen (O{sub 2}) gas, which is in strong contrast to Si surfaces. Two types of dissociative adsorption, trapping-mediated and direct dissociation, were confirmed by oxygen uptake measurements depending on the incident energy of O{sub 2}. The direct adsorption process can be activated by increasing the translational energy, resulting in an increased population of Ge{sup 2+} and a higher final oxygen coverage. We demonstrated that hyperthermal O{sub 2} beams remarkably promote the room-temperature oxidation with novel atomic configurations of oxides at the Ge(100) surface. Our findings will contribute to the fundamental understanding of oxygen adsorption processes at 300 K from the initial stages to saturated oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous MS-IR Studies of Surface Formate Reactivity Under Methanol Synthesis Conditions on Cu/SiO2

The coverages and surface lifetimes of copper-bound formates on Cu/SiO2 catalysts, and the steady-state rates of reverse water-gas shift and methanol synthesis have been measured simultaneously by mass (MS) and infrared (IR) spectroscopies under a variety of elevated pressure conditions at temperatures between 140 and 160°C. DCOO lifetimes under steady state catalytic conditions in CO2:D2 atmospheres were measured by 12C – 13C isotope transients (SSITKA). The values range from 220s at 160°C to 660s at 140°C. The catalytic rates of both reverse water gas shift (RWGS) and methanol synthesis are ~100-fold slower than this formate removal rate back to CO2+1/2 H2, and thus they do not significantly influence the formate lifetime or coverage at steady state. The formate coverage is instead determined by formate’s rapid production / decomposition equilibrium with gas phase CO2+H2. The results are consistent with formate being an intermediate in methanol synthesis, but with the rate-controlling step being after formate production (for example, its further hydrogenation to methoxy). A 2-3 fold shorter life time (faster decomposition rate) was observed for formate under reactions conditions when both D2 and CO2 are present than in pure Ar or D2+Ar alone, attributed to effects of coadsorbates (produced in D2 and CO2) on adsorbed formate reaction pathways. The carbon which appears in the methanol product spends a longer time on the surface than the formate species, 1.8 times as long at 140°C. The additional delay on the surface is attributed in part to readsorption of methanol on the catalyst, thus obscuring the mechanistic link between formate and methanol.

10 SYNTHETIC FUELS↗

Self-assembling of formic acid on the partially oxidized p (2×1) Cu(110) surface reconstruction at low coverages

Carbon dioxide (CO 2 ) reduction for synthetic fuel generation could be an integral part of a sustainable energy future. Copper (Cu) is the leading electrocatalyst for CO 2 reduction to produce multiple C-containing products such as C1 and C2 hydrocarbons and oxygenates. Understanding the mechanisms leading to their production could help optimize these pathways further. Adsorption studies of the many possible intermediates on well-characterized surfaces are crucial to elucidating these mechanisms. In this work, we explore the adsorption configurations of formic acid (HCOOH) on the surface of the partially oxidized p (2 × 1) reconstruction of the Cu(110) surface, using low-temperature scanning tunneling and atomic force microscopy, in conjunction with density functional theory modeling. We find that HCOOH adsorbs favorably on the CuO chain comprising the reconstruction. The adsorption interactions involve dative bonding of the carbonyl O to the oxidized Cu and hydrogen bonding of the OH group to the surface O or to an adjacently adsorbed HCOOH molecule. Furthermore, cooperative adsorption of the molecules occurs, forming two- to three-molecule-long oligomer chains, facilitated by intermolecular hydrogen bonding and mutual polarization of the CuO acid-base adsorption sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of H 2 O on the ethylene glycol/alkali dismantling of bagasse for high-value conversion

Using a high-boiling alcohol system to dismantle main components of biomass is a feasible technology. Reducing dismantle operating costs and improving dismantle efficiency are essential for promoting the green, economical, and sustainable development of biomass refining. Therefore, based on the low cost and chemical properties of H 2 O at high temperature, the effects of different H 2 O dosages in NaOH-catalyzed ethylene glycol (HBAA) system on the dismantling efficiency of bagasse, surface lignin coverage, recovered-lignin activity and enzymatic hydrolysis efficiency were investigated. Compared with the HBAA dismantling system without H 2 O, the HBAA system with 60% w/v H 2 O can obviously increase the removal rates of lignin and hemicellulose, while recovering up to 99% of cellulose and significantly declining surface lignin coverage, thus enhancing the enzymatic hydrolysis efficiency. Additionally, the results of density functional theory calculations and 2D HSQC NMR analysis prove that the synergy between H 2 O and ethylene glycol can promote the esterification reaction occurrence at the α-C carbon cation in β-O-4 structure of lignin, thereby protecting the β-O-4 aromatic ether bond. Simultaneously, when the H 2 O dosage increase from 0% to 60%, the enzymatic yield increases from 84.51% to 93.74% with an enzyme load of 10 FPU/g. Based on experimental results, this study conducted a techno-economic analysis of bagasse dismantling for ethanol and co-production of lignin, achieving a minimum ethanol selling price of $\$$1.07 per kg. Here, in this study, a green and economical solution for dismantling the main components of bagasse is developed, which is important for the high-value conversion of bagasse.

Ethylene glycol↗

The study of oxygen molecules on Pt (111) surface with high resolution x-ray photoemission spectroscopy

By using high resolution x-ray photoelectron spectroscopy, we show that inelastic scattering of photoelectron at low temperature (30-50 K) generates two kinds of oxygen species on Pt (111) surface. Intense synchrotron radiation source dissociates oxygen molecules into chemisorbed atomic oxygen and induces the formation of PtO on the surface. Estimated coverage of dissociated atomic oxygen is 0.5 ML, suggesting possible formation of p(2x1) surface structure, while PtO coverage shows saturation coverage of 0.5 ML. Molecular oxygen dosed at 30 K undergoes thermally activated transition from physisorbed to chemisorbed state at around 40 K.

36 MATERIALS SCIENCE↗

FX2 advanced fogging technology - 15711

Problem statement: The need for an advanced technology that can better address potential airborne contaminants at DOE Savannah River Site 235-F. Current methods of knocking down or fixing this contamination are labor intensive, costly, and sometimes ineffective. Thus, to make exposure ALARA, the advanced fogging effort is being tested using Idaho National Laboratory's FX2 fixative agent. The FX2 fogging agent is a proprietary mixture of water, latex paint (LTX), glycerin (GLY) and sodium lauryl sulfate (SLS). Initial development began in 2006 when a DOE Small Business Innovative Research (SBIR) grant resulted in the development of a conceptual advanced capture coating fog system. This coating is shown to be excellent at reducing airborne contamination and 'fixing' particulates in place as demonstrated by Idaho National Lab. Controlling Potential Airborne Particulates: Testing capacity to knockdown airborne particulates. Evaluating ability to fix to different surfaces (e.g., glass, wood, steel, concrete, brick). Line of sight as well as non-line of sight (shadowed) locations will be tested for coverage. Adhesiveness and Coverage of Surface Area: Contact area will be placed under air pressure to attempt dislodging of dried mixture. Particle analysis utilizing ImageJ will be conducted to determine quantifiable coverage. Ignitability: Observation of the FX2's reactivity to flame and heat sources as it is being applied. Results will provide useful information for the prevention of potential hazards. Determine Shielding Properties Against Alpha Sources: Determine the shielding abilities of the FX2. Fogging agent against an alpha particle emitting point source. Evaluating Critical Properties: These properties will be evaluated to better characterize the FX2 and allow for optimal understanding of results: ASTM E1354 - Burn Rate; NFPA 296-Flashover; ASTM D2196 - Viscosity; ASTM D1331 - Surface Tension; ASTM D792 - Density. Testing Innovations: Developed by the National Institutes of Health, ImageJ is a public domain image processing program that allows for the analysis that this effort requires. Coverage: Through contrast analysis, ImageJ can be used to determine the coverage of the agent upon any of the testing surfaces. Correlations: With the feature of coverage evaluation, a relationship, and thus a graphical representation, can be made between surface coverage and radiation shielding. Future work: Engineering and manufacturing of mobile robotic fogging device. ASTM WK5394: establishing performance specifications for stabilizers to minimize migration of dispersible radioactive contamination.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Adsorption of V on a Hematite (0001) Surface and its Oxidation: Submonolayer Coverage

The adsorption of submonolayer V on an idealized model hematite (0 0 0 1) surface and subsequent oxidation under atomic O adsorption are studied by density functional theory. The preferred adsorption sites, adsorption energy and configuration changes due to V and O adsorption are investigated. It is found that in most cases V forms threefold bonds with surface O atoms, inducing a large geometry change at the hematite surface and near surface region and a bond stretch between surface Fe and O. The adsorption energy is mainly decided by interplay between adsorbed metal-surface oxygen bonding and adsorbed metal - subsurface metal interaction. The relative energy of subsequent O adsorption and geometry depends on the reformed V/hematite structure. Electronic properties such as projected densities of states and chemical state change upon V adsorption are studied through both periodic slab and embedded cluster localized orbital calculations; both strong vanadium-oxygen and vanadium-iron interactions are found. While V generally donates electrons to a hematite surface, causing nearby Fe to be partially reduced, the Fe and V oxidization state depends very much on the coverage and detailed adsorption configuration. When the V/hematite system is exposed to atomic O, V is further oxidized and surface/near surface Fe is re-oxidized. Our theoretical results are compared with X-ray surface standing wave and X-ray photoelectron spectroscopic measurements. The influence of d-electron correlation on the predicted structures is briefly discussed, making use of the DFT + U scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relationship between the longwave cloud radiative forcing at the surface and the top of the atmosphere

In order to achieve global coverage, any surface radiation climatology has to be based on satellite observations. In the last decade several schemes have been devised to obtain the surface solar insolation from top of the atmosphere reflected solar radiation. More recently, attempts have been made to infer the components of longwave radiation at the surface from satellite sounder data using a radiative transfer model. In addition to the radiative transfer scheme, these methods require assumptions about the effective emitting temperature of cloud tops and bases. Modeling studies have shown that although there are strong correlations between the solar upwelling radiative flux and surface flux, this is not true of the longwave. However, if the clear sky component is considered separately such that the cloud longwave forcing at the top and at the surface are compared, a slightly different picture emerges. During the FIRE Cirrus IFO, surface radiation measurements were made at several sites and coincident satellite overpass data was also collected. It may be possible to extract the longwave cloud radiative forcing at the top and surface from these data. If relationships are verifiable by observations, this information can be useful for the extraction of the surface longwave radiation from satellite data. The radiative transfer schemes used to convert upwelling spectral radiances into a downwelling longwave radiation can provide the clear sky component. The cloud radiative forcing at the top of the atmosphere can then modify the surface fluxes according to relationships shown. It should be noted that this procedure may be considered only for temporal averages and not for instantaneous deductions of surface fluxes. This would be most useful in compiling monthly mean regional climatologies of the surface longwave fluxes.

HARSHVARDHAN↗

Modeling the Effect of Surface Platinum–Tin Alloys on Propane Dehydrogenation on Platinum–Tin Catalysts

Uncertainty analysis, reported experimental literature data, and density functional theory were synthesized to model the effect of surface tin coverage on platinum-based catalysts for nonoxidative propane dehydrogenation to propylene. Here, this study tests four different platinum–tin skin surface models as potential catalytic sites, Pt 3 Sn/Pt(100), PtSn/Pt(100), Pt 3 Sn/Pt(111), and Pt 2 Sn/Pt(211), and compares them to the corresponding pure Pt surface sites using an uncertainty analysis methodology that uses BEEF-vdW with its ensembles (BMwE) to generate the uncertainty for the energies of the intermediates and transition states. One experimental data set with two experimental observations, selectivity to propylene and turnover frequency of propylene, was used as a calibration data set to evaluate the impact of the experimental data on informing the models. This study finds that the prior model for Pt 3 Sn/Pt(100) is the most active and Pt 2 Sn/Pt(211) is the most selective toward propylene. Active sites on the (100) facet have the highest probability of being responsible for C 1 and C 2 product formations (C–C bond cleavage). Increasing the Sn coverage on the (100) surface facet to a PtSn/Pt(100) active site leads to a significantly reduced rate and might explain the experimentally observed higher selectivity of Sn-doped catalysts relative to pure Pt catalysts. Next, this study finds that for all surfaces, except PtSn/Pt(100), the rate-controlling steps are the initial dehydrogenation steps alongside some partially rate-controlling second dehydrogenation steps. For PtSn/Pt(100), only the initial terminal dehydrogenation step to CH 3 CH 2 CH 2 * and second dehydrogenation steps are rate-controlling. Next, the calibrated models for all surfaces were found to be selective toward propylene production and model the reported turnover frequency successfully. Nevertheless, Pt 2 Sn/Pt(211) emerges as the active site with some (minor) evidence as the main active site based on Jeffreys’ scale interpretation of Bayes factors. This observation agrees with prior studies that also found step sites to be most likely the most relevant active sites for pure Pt catalysts. Overall, the results indicate that tin, in addition to affecting the binding strength of the adsorbed species, prevents deeper dehydrogenation (reducing coking) and cracking reactions through increasing activation barriers for unwanted side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unveiling the Electrocatalytic Hydrogen Evolution Reaction Pathway on RuP 2 through Ab Initio Grand Canonical Monte Carlo

In this study, the high catalytic reactivity of ruthenium phosphide (RuP 2 ) has been identified by first-principles density functional theory (DFT) calculations for the electrocatalytic hydrogen evolution reaction (HER). Complex surface reconstructions are considered by applying the ab initio grand canonical Monte Carlo (ai-GCMC) algorithm, efficiently providing a sufficient phase-space exploration of possible surfaces. Combined with surface-phase Pourbaix diagrams, we are able to identify the actual surfaces that obtained under specific experimental environments, thus leading to a more accurate understanding of the nature of the active sites and the binding strength of adsorbates. Specifically, through hundreds of surface reconstructions and hydrogenation states generated with ai-GCMC, we identify the most favorable surface phases of RuP 2 under aqueous acidic conditions. We discover that the HER activity is determined by multiple surfaces with different stoichiometries within a narrow electrode potential window. Low HER overpotential (η) has been found for each of the identified surfaces, as low as 0.04 V. High H-coverage reconstructed surfaces have been discovered under acidic conditions, and the surface Ru sites introduced by additional Ru adatoms or exposed by P-vacancies serve as the active sites for HER based on their nearly reversible H binding. Furthermore, this work provides atomistic insights into the origin of high HER activity on RuP 2 by exploring the dynamic surface phases of electrocatalysts and features a generalizable method to explore the reconstructed/hydrogenated surface space as a function of experimental conditions.

25 ENERGY STORAGE↗

Mapping Impervious Surfaces Globally at 30m Resolution Using Global Land Survey Data

Impervious surfaces, mainly artificial structures and roads, cover less than 1% of the world's land surface (1.3% over USA). Regardless of the relatively small coverage, impervious surfaces have a significant impact on the environment. They are the main source of the urban heat island effect, and affect not only the energy balance, but also hydrology and carbon cycling, and both land and aquatic ecosystem services. In the last several decades, the pace of converting natural land surface to impervious surfaces has increased. Quantitatively monitoring the growth of impervious surface expansion and associated urbanization has become a priority topic across both the physical and social sciences. The recent availability of consistent, global scale data sets at 30m resolution such as the Global Land Survey from the Landsat satellites provides an unprecedented opportunity to map global impervious cover and urbanization at this resolution for the first time, with unprecedented detail and accuracy. Moreover, the spatial resolution of Landsat is absolutely essential to accurately resolve urban targets such a buildings, roads and parking lots. With long term GLS data now available for the 1975, 1990, 2000, 2005 and 2010 time periods, the land cover/use changes due to urbanization can now be quantified at this spatial scale as well. In the Global Land Survey - Imperviousness Mapping Project (GLS-IMP), we are producing the first global 30 m spatial resolution impervious cover data set. We have processed the GLS 2010 data set to surface reflectance (8500+ TM and ETM+ scenes) and are using a supervised classification method using a regression tree to produce continental scale impervious cover data sets. A very large set of accurate training samples is the key to the supervised classifications and is being derived through the interpretation of high spatial resolution (approx. 2 m or less) commercial satellite data (Quickbird and Worldview2) available to us through the unclassified archive of the National Geospatial Intelligence Agency (NGA). For each continental area several million training pixels are derived by analysts using image segmentation algorithms and tools and then aggregated to the 30m resolution of Landsat. Here we will discuss the production/testing of this massive data set for Europe, North and South America and Africa, including assessments of the 2010 surface reflectance data. This type of analysis is only possible because of the availability of long term 30m data sets from GLS and shows much promise for integration of Landsat 8 data in the future.

global land survey↗