Search NASA⌕ Search

SEARCH · Search NASA

Results for “THICKNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Towards High-Speed friction stir welding of 25 mm Thick AA2139-T8: tool innovation and process development

Joining thick plates (≥ 12 mm) of aluminum (Al) alloys is challenging due to high tool forces, uneven material flow, and non-uniform heat distribution through the material’s thickness. Recent advancements in tool design and welding parameters for friction stir welding (FSW) in thick plates butt joining have encountered a developmental plateau, highlighting the need for innovative approaches to overcome existing limitations. Here, this study focuses on the systematic development of single-pass and double-pass FSW processes for high-strength aluminum alloy AA2139-T8, to improve joint efficiency and enable high-speed welding capabilities. Experimental evidence is presented for a novel tool design with opposing pin threads, enabling high-speed (178 mm/min) single-pass friction stir butt welding of 25 mm thick AA2139-T8. A series of FSW trials was conducted both in air and with a trailing water spray, using steel backing plates (BPs) to investigate the impact of quenching and cooling rates on process response and joint performance. A joint efficiency of 83% was attained using the novel tool features and effectively controlling process forces and thermal boundary conditions.

AA2139-T8↗

Deuteron irradiation of W and WO 3 for production of high specific activity 186 Re: Challenges associated with thick target preparation

This investigation evaluated target fabrication and beam parameters for scale-up production of high specific activity 186 Re using deuteron irradiation of enriched 186 W via the 186 W(d,2n) 186 Re reaction. Thick W and WO 3 targets were prepared, characterized and evaluated in deuteron irradiations. Full-thickness targets, as determined using SRIM, were prepared by uniaxi-ally pressing powdered natural abundance W and WO 3 , or 96.86% enriched 186 W, into Al target supports. Alternatively, thick targets were prepared by pressing 186 W between two layers of graphite powder or by placing pre-sintered (1105°C, 12 hours) natural abundance WO 3 pellets into an Al target support. Assessments of structural integrity were made on each target pre-pared. Prior to irradiation, material composition analyses were conducted using SEM, XRD, and Raman spectroscopy. With-in a minimum of 24 hours post irradiation, gamma-ray spectroscopy was performed on all targets to assess production yields and radionuclidic byproducts. Problems were encountered with the structural integrity of some pressed W and WO 3 pellets before and during irradiation, and target material characterization results could be correlated with the structural integrity of the pressed target pellets. Under the conditions studied, the findings suggest that all WO 3 targets prepared and studied were unacceptable. By contrast, 186W metal was found to be a viable target material for 186 Re production. Lastly, thick targets prepared with powdered 186W pressed between layers of graphite provided a particularly robust target configuration.

43 PARTICLE ACCELERATORS↗

Exact solution of burst pressure for thick-walled pipes using the flow theory of plasticity

This paper develops an exact solution of burst pressure for defect-free, thick-walled pipes using the flow theory of plasticity in terms of the average shear stress yield criterion (or Zhu-Leis yield criterion). The pipe steel is assumed to obey the power-law strain hardening rule, and large plastic deformation is described by the finite strain theory. On this basis, internal pressure is obtained as a power series function of the effective strains on the inside and outside surfaces of the thick-walled pipe with use of the second Bernoulli numbers. At burst failure, the Zhu-Leis flow solution of burst pressure is determined as a power series solution, and the burst effective strains, the burst effective stresses, and the burst pressure are functions of the diameter ratio (D o / D i ), strain hardening exponent (n), and ultimate tensile strength (UTS). Similarly, the Tresca and von Mises flow solutions of burst pressure are also determined as a power series solution in terms of the Tresca and von Mises yield criteria. A general closed-from exact solution of burst pressure is then proposed for the three yield criteria, and the results showed that the proposed exact solution matches well with the power series solution for each yield criterion. Moreover, the von Mises flow solution is an upper bound prediction, the Tresca flow solution is a lower bound prediction, and the Zhu-Leis flow solution is an intermediate prediction that agrees well with the finite element analysis results of burst pressure for thick-walled pipes. Furthermore, two datasets of full-scale burst tests are then utilized to evaluate and validate the proposed flow solutions of burst pressure for both thin and thick-walled pipes.

42 ENGINEERING↗

Preparation of ultra-thin and high-quality WO{sub 3} compact layers and comparision of WO{sub 3} and TiO{sub 2} compact layer thickness in planar perovskite solar cells

In this paper, the ultra-thin and high-quality WO{sub 3} compact layers were successfully prepared by spin-coating-pyrolysis method using the tungsten isopropoxide solution in isopropanol. The influence of WO{sub 3} and TiO{sub 2} compact layer thickness on the photovoltaic performance of planar perovskite solar cells was systematically compared, and the interface charge transfer and recombination in planar perovskite solar cells with TiO{sub 2} compact layer was analyzed by electrochemical impedance spectroscopy. The results revealed that the optimum thickness of WO{sub 3} and TiO{sub 2} compact layer was 15 nm and 60 nm. The planar perovskite solar cell with 15 nm WO{sub 3} compact layer gave a 9.69% average and 10.14% maximum photoelectric conversion efficiency, whereas the planar perovskite solar cell with 60 nm TiO{sub 2} compact layer achieved a 11.79% average and 12.64% maximum photoelectric conversion efficiency. - Graphical abstract: The planar perovskite solar cell with 15 nm WO{sub 3} compact layer gave a 9.69% average and 10.14% maximum photoelectric conversion efficiency, whereas the planar perovskite solar cell with 60 nm TiO{sub 2} compact layer achieved a 11.79% average and 12.64% maximum photoelectric conversion efficiency. Display Omitted - Highlights: • Preparation of ultra-thin and high-quality WO{sub 3} compact layers. • Perovskite solar cell with 15 nm-thick WO{sub 3} compact layer achieved PCE of 10.14%. • Perovskite solar cell with 60 nm-thick TiO{sub 2} compact layer achieved PCE of 12.64%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thickness dependent transport and magnetotransport in CSD grown La{sub 0.7}Pb{sub 0.3}MnO{sub 3} manganite films

Highlights: {yields} Thickness dependent transport and MR of CSD grown La{sub 0.7}Pb{sub 0.3}MnO{sub 3} manganite films. {yields} Chemical Solution Deposition (CSD) is the low cost, simple and easy to handle. {yields} Prominent strain effect in lower thickness films. {yields} 3D lattice strain and microstructure govern the transport and MR in the films. {yields} Low temperature resistivity minima is also affected by 3D lattice strain. -- Abstract: We report the effect of film thickness on transport and magnetotransport in La{sub 0.7}Pb{sub 0.3}MnO{sub 3} (LPMO) manganite films grown on single crystalline LaAlO{sub 3} substrate using chemical solution deposition (CSD) technique. AFM measurements show the island type grain growth responsible for the strain at the film-substrate interface, while structural studies using XRD shows the presence of thickness dependent compressive strain in the films which modifies the transport and magnetotransport in LPMO/LAO films. The observation of low temperature resistivity minima behavior in all the LPMO films has been explained in the context of electron-electron scattering mechanism. The ZFC-FC magnetization measurements show the glassy state behavior below T{sub min}.

36 MATERIALS SCIENCE↗

Co-electrospinning fabrication and photocatalytic performance of TiO{sub 2}/SiO{sub 2} core/sheath nanofibers with tunable sheath thickness

Graphical abstract: - Highlights: • The core–sheath TiO{sub 2}/SiO{sub 2} nanofibers were fabricated by co-electrospinning technique. • The catalytic property of nanofibers with different sheath thickness was studied. • The potential methods of improving catalytic efficiency are suggested. - Abstract: In this paper, core/sheath TiO{sub 2}/SiO{sub 2} nanofibers with tunable sheath thickness were directly fabricated via a facile co-electrospinning technique with subsequent calcination at 500 °C. The morphologies and structures of core/sheath TiO{sub 2}/SiO{sub 2} nanofibers were characterized by TGA, FESEM, TEM, FTIR, XPS and BET. It was found that the 1D core/sheath nanofibers are made up of anatase–rutile TiO{sub 2} core and amorphous SiO{sub 2} sheath. The influences of SiO{sub 2} sheath and its thickness on the photoreactivity were evaluated by observing photo-degradation of methylene blue aqueous solution under the irradiation of UV light. Compared with pure TiO{sub 2} nanofibers, the core/sheath TiO{sub 2}/SiO{sub 2} nanofibers performed a better catalytic performance. That was attributed to not only efficient separation of hole–electron pairs resulting from the formation of heterojunction but also larger surface area and surface silanol group which will be useful to provide higher capacity for oxygen adsorption to generate more hydroxyl radicals. And the optimized core/sheath TiO{sub 2}/SiO{sub 2} nanofibers with a sheath thickness of 37 nm exhibited the best photocatalytic performance.

36 MATERIALS SCIENCE↗

Activation energy and carriers dynamics of multilayer CdTe/ZnTe quantum dots with different ZnTe separation layer thicknesses

We studied the optical properties of multilayer CdTe/ZnTe quantum dots (QDs) with various ZnTe separation layer thicknesses on GaAs substrates. The low temperature photoluminescence (PL) spectra show that the excitonic peaks in multilayer CdTe/ZnTe QDs shift to higher energy levels, and PL peak intensities increase with increasing ZnTe separation layer thickness. This is because of increasing uncoupling and because there are many more carriers confined in the QDs with wider separation layers. Temperature-dependent PL measurements showed that the activation energies of the confined electrons in the multilayer CdTe/ZnTe QDs decreases with decreasing ZnTe separation layer thickness. The time-resolved PL spectra show increasing carrier decay times with decreasing ZnTe separation layer thickness, due to increasing coupling between QDs with narrower separation layers.

36 MATERIALS SCIENCE↗

Impact of MgO thickness on the perpendicular magnetic anisotropy of Mo/Co2FeAl/MgO/Mo multilayers with improved annealing stability

Highlights: • Robust PMA is demonstrated for thermally stable Mo/Co{sub 2}FeAl(CFA)/MgO/Mo multilayer. • Thickness of CFA and MgO over-layer plays a main role in achieving the strong PMA. • Significant PMA energy of K{sub eff} ≈ 1.67 × 10{sup 6} erg/cm{sup 3} is achieved for film annealed at 400 °C. • Co and/or Fe – 3d{sub Z}{sup 2} and O-2P{sub Z} orbital hybridization at interface is the origin for PMA. - Abstract: In this study, an interfacial perpendicular magnetic anisotropy (PMA) is achieved in Mo/Co{sub 2}FeAl (CFA)/MgO/Mo multilayer with good thermal stability up to 400 °C by tuning the annealing temperature and film thickness of CFA and MgO. For an optimized CFA film thickness (1.0 nm) and annealing temperature (400 °C), the CFA/MgO interface plays a main role in achieving the strong PMA property when the MgO film thickness was tuned from 0.5 nm to 2.0 nm. The effective perpendicular magnetic anisotropy energy density (K{sub eff}) is approximately 1.67 × 10{sup 6} erg/cc when t{sub MgO} = 2 nm. Surface morphology and surface roughness changes in the films are investigated by atomic force microscopy (AFM). An enhancement in surface smoothness is observed for the annealed films. X-ray photoelectron spectroscopy (XPS) reveals that the strong PMA in Mo/CFA/MgO is originated from the adequate oxidation of Co and Fe at CFA/MgO interface.

36 MATERIALS SCIENCE↗

Thickness and uniformity mapping of thin foils using resistive silicon detectors

Alpha energy loss is a common tool used for measuring target thicknesses. However, these measurements are often made without position information, which either forfeits knowledge of material uniformity and local thickness or requires a prohibitive number of measurements per target to partially recover this information. In consideration of this, a method for measuring position-dependent thicknesses is described in this work; by using the position-sensitivity of the dual-axis duo-lateral (DADL) silicon detector, thicknesses across the entire face of the material can be measured to sub-mm precision with a single measurement. Several examples are presented using a number of targets with varying characteristics, which altogether demonstrate the precision, accuracy, and versatility of this technique.

Foil uniformity↗

Experimental study of energy-dependent angular broadening of MeV electron beams for high-resolution imaging in thick samples

In scanning transmission electron microscopy (STEM), spatial resolution is primarily influenced by the projected size of the electron probe within the specimen. In thin samples, a large semi-convergence angle enables a tightly focused beam and sub-nanometer resolution. However, in thick specimens, resolution is fundamentally limited by transverse beam broadening from multiple large-angle scattering events—for example, a probe with 10 mrad angular divergence can broaden by ∼100 nm over a 10 μm path. Since this broadening scales inversely with beam energy, MeV-STEM offers a promising route for high-resolution imaging in thick materials. To quantitatively assess this effect, we performed high-precision measurements at UCLA’s PEGASUS beamline, characterizing beam divergence and intensity profiles for 3–8 MeV electrons transmitted through a wedged-silicon sample of varying thickness. Our results reconcile discrepancies among analytical models and validate Monte Carlo simulations. Here, we find that increasing beam energy from 3.0 to 5.8 MeV reduces angular broadening by a factor of 2.6, with diminishing returns observed at 7.6 MeV. These findings provide a quantitative framework for optimizing MeV-STEM parameters in high-resolution imaging of thick biological and microelectronic specimens, and for guiding beam energy selection in other advanced imaging modes beyond STEM.

36 MATERIALS SCIENCE↗

Thickness-Dependent Cross-Plane Thermal Conductivity Measurements of Exfoliated Hexagonal Boron Nitride

Submicrometer-thick layers of hexagonal boron nitride (hBN) exhibit high in-plane thermal conductivity and useful optical properties, and serve as dielectric encapsulation layers with low electrostatic inhomogeneity for graphene devices. Despite the promising applications of hBN as a heat spreader, the thickness dependence of its cross-plane thermal conductivity is not known, and the cross-plane phonon mean free paths (MFPs) have not been measured. We measure the cross-plane thermal conductivity of hBN flakes exfoliated from bulk crystals. We find that submicrometer thick flakes exhibit thermal conductivities up to 8.1 ± 0.5 W m –1 K –1 at 295 K, which exceeds previously reported bulk values by more than 60%. Surprisingly, the average phonon mean free path is found to be several hundred nanometers at room temperature, a factor of 5 larger than previous predictions. When planar twist interfaces are introduced into the crystal by mechanically stacking multiple thin flakes, the cross-plane thermal conductivity of the stack is found to be a factor of 7 below that of individual flakes with similar total thickness, thus providing strong evidence that phonon scattering at twist boundaries limits the maximum phonon MFPs. These results have important implications for hBN integration in nanoelectronics and improve our understanding of thermal transport in twodimensional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shell Thickness and Heterogeneity Dependence of Triplet Energy Transfer between Core–Shell Quantum Dots and Adsorbed Molecules

Quantum dot (QD)-sensitized triplet energy transfer (TET) has found promising applications in photon upconversion and photocatalysis. However, the underlying mechanism of TET in the QD-acceptor complex remains unclear despite the well-developed TET theory for the molecular donor–acceptor systems. Herein, the coupling strength of TET from CdSe/CdS core–shell QDs to 9-anthracene carboxylic acid (ACA) was studied by measuring the TET rate as a function of shell thickness with time-resolved photoluminescence. The change of TET-coupling strength with increasing shell thickness was further compared to those of electron and hole transfers from QDs so that we could test whether QD-sensitized TET is mediated by the charge transfer virtual state and can be considered as simultaneous electron and hole transfers as in molecular donor–acceptor systems. The measured coupling strength of TET from the CdSe/CdS QD decreases exponentially with the CdS shell thickness r: |V|(r) = |V|(0)e –βr , with an exponential decay factor β of 0.19 Å –1 , which is smaller than the sum of the measured decay factors for electron transfer to methyl viologen (0.18 Å –1 ) and hole transfer to phenothiazine (0.29 Å –1 ) from the same QD. This inconsistency is explained by the broadening of QD shell thicknesses in the distance dependence study, which significantly modifies the TET-coupling strength and driving force, resulting in a shallower distance dependence of the TET rate constants. This study sheds light on the fundamental mechanisms of QD-sensitized TET reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detecting Permafrost Active Layer Thickness Change From Nonlinear Baseflow Recession

We report permafrost underlies about one fifth of the global land area and affects ground stability, freshwater runoff, soil chemistry, and surface-atmosphere gas exchange. The depth of thawed ground overlying permafrost (active layer thickness) has broadly increased across the Arctic in recent decades, coincident with a period of increased streamflow, especially the lowest flows (baseflow). Mechanistic links between active layer thickness and baseflow have recently been explored using linear reservoir theory, but most watersheds behave as nonlinear reservoirs. We derive theoretical nonlinear relationships between long-term average saturated soil thickness $\bar{η}$(proxy for active layer thickness) and long-term average baseflow. When applied to 38 years of daily streamflow data for the Kuparuk River basin on the North Slope of Alaska, the theory predicts $\bar{η}$ increased 0.17 ± 0.22[2σ] cm a -1 between 1983 and 2020 (6.4 ± cm total). The rate of increase nearly doubled to 0.29 ± 0.31 cm a -1 between 1990 and 2020, during which time local field measurements from Circumpolar Active Layer Monitoring sites indicate the active layer increased 0.31 ± 0.22 cm a -1 . The predicted rate of increase more than doubled again between 2002 and 2020, outpacing a near doubling of observed active layer thickening, consistent with trends in terrestrial water storage inferred from Gravity Recovery and Climate Experiment satellite gravimetry and Modern-Era Retrospective Analysis for Research and Applications climate reanalysis. Overall, hydrologic change is accelerating in the Kuparuk River basin, and we provide a theoretical framework for estimating basin-scale changes in active layer water storage from streamflow measurements.

54 ENVIRONMENTAL SCIENCES↗

Reactions of NO2 with BaO/Pt(111) Model Catalysts: The Effects of BaO Film Thickness and NO2 Pressure on the Formation of Ba(NOx)2 Species

The adsorption and reaction of NO2 on BaO (<1, ~3, and >20 monolayer equivalent (MLE))/Pt(111) model systems were studied with temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and infrared reflection absorption spectroscopy (IRAS) under ultra-high vacuum (UHV) as well as elevated pressure conditions. NO2 reacts with sub-monolayer BaO (<1 MLE) to form nitrites only, whereas the reaction of NO2 with BaO (~3 MLE)/Pt(111) produces mainly nitrites and a small amount of nitrates under UHV conditions (PNO2 ~ 1.0 × 10-9 Torr) at 300 K. In contrast, a thick BaO(>20 MLE) layer on Pt(111) reacts with NO2 to form nitrite-nitrate ion pairs under the same conditions. At elevated NO2 pressures (≥ 1.0 × 10-5 Torr), however, BaO layers at all these three coverages convert to amorphous barium nitrates at 300 K. Upon annealing to 500 K, these amorphous barium nitrate layers transform into crystalline phases. The thermal decomposition of the thus-formed Ba(NOx)2 species is also influenced by the coverage of BaO on the Pt(111) substrate: at low BaO coverages, these species decompose at significantly lower temperatures in comparison with those formed on thick BaO films due to the presence of Ba(NOx)2/Pt interface where the decomposition can proceed at lower temperatures. However, the thermal decomposition of the thick Ba(NO3)2 films follows that of bulk nitrates. Results obtained from these BaO/Pt(111) model systems under UHV and elevated pressure conditions clearly demonstrate that both the BaO film thickness and the applied NO2 pressure are critical in the Ba(NOx)2 formation and subsequent thermal decomposition processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect structure of Ge(111)/cubic Pr{sub 2}O{sub 3}(111)/Si(111) heterostructures: Thickness and annealing dependence

The defect structure of Ge(111) epilayers grown by molecular beam epitaxy on cubic Pr{sub 2}O{sub 3}(111)/Si(111) support systems was investigated by means of transmission electron microscopy and laboratory-based x-ray diffraction techniques. Three main types of defects were identified, namely, rotation twins, microtwins, and stacking faults, and studied as a function of Ge film thickness and after annealing at 825 deg. C in ultrahigh vacuum. Rotation twins were found to be localized at the Ge(111)/cubic Pr{sub 2}O{sub 3}(111) interface and their amount could be lowered by the thermal treatment. Microtwins across (111) were detected only in closed Ge films, after Ge island coalescence. The fraction of Ge film volume affected by microtwinning is constant within the thickness range of approx20-260 nm. Beyond 260 nm, the density of microtwins is clearly reduced, resulting in thick layers with a top part of higher crystalline quality. Microtwins resulted insensitive to the postdeposition annealing. Instead, the density of stacking faults across (111) planes decreases with the thermal treatment. In conclusion, the defect density was proved to diminish with increasing Ge thickness and after annealing. Moreover, it is noteworthy that the annealing generates a tetragonal distortion in the Ge films, which get in-plane tensely strained, probably due to thermal mismatch between Ge and Si.

36 MATERIALS SCIENCE↗

Extension of the Si:C Stressor Thickness by Using Multiple ClusterCarbon Species

ClusterCarbon implantation is now well established as an attractive alternative for producing stress in advanced NMOS devices. ClusterCarbon has the advantage over monomer carbon implant in it's self-amorphization feature, eliminating the need for PAI implantation while producing highly substitutional carbon incorporation. To date, the limitation of this approach has been the high energy limit, due to the extraction limit of the available production tools for the preferred carbon species, which has been the C7Hx molecule. It is noted that the C7 species is produced by the breakup of the parent C14H14 molecule in the ion source. It is further noted that the preferred method of producing the Si:C stress layer is a multiple implant sequence with ClusterCarbon implants at various energies and doses designed to produce a carbon profile which is constant in-depth. The stressor thickness limit using C7 is known to be about 40 nm, which is less than the stressor thickness used in the conventional SiGe process for PMOS. In this work, it is shown that utilizing the C5 molecule which is also available from the breakup of C14H14 enables the stressor layer thickness to be extended to at least 60 nm, which is consistent with the conventional SiGe process. It will be shown that one additional C5 implant, performed after a standard C7 multiple implant sequence, can produce the extension of the stressor thickness while maintaining the flat depth profile. A detailed process characterization will be shown for this new process sequence.

36 MATERIALS SCIENCE↗

Enhanced radiation tolerance in nitride multilayered nanofilms with small period-thicknesses

This paper demonstrates a substantial enhancement in radiation tolerance for small period-thickness of CrN/AlTiN multilayered nanofilms. CrN/AlTiN multilayered nanofilms with period-thicknesses of 3, 5, 7, and 9 nm were irradiated by 190 keV Ar{sup +} ions to fluences ranging from 1 to 5 Multiplication-Sign 10{sup 16} ions/cm{sup 2}. Nanofilm with 3 nm period-thickness begins to be amorphized under 5 Multiplication-Sign 10{sup 16} ions/cm{sup 2}, while those with larger period-thicknesses are amorphized under 3 Multiplication-Sign 10{sup 16} ions/cm{sup 2}. Our results show that multilayered ceramic nanofilms are potential radiation tolerant materials with good properties. The interfaces in the multilayered nanofilms act as good sinks to absorb the radiation-induced defects.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Density determination of nano-layers depending to the thickness by non-destructive method

Non-destructive tests used to characterize and observe the state of the solids near the surface or at depth, without damaging them or damaging them. Density is frequently used to follow the variations of the physical structure of the samples, as well as in the calculation of quantity of material required to fill a given volume, and it is also used to determine the homogeneity of a sample. However, the measurement of the acoustic properties (density, elastic constants,…) of a thin film whose thickness is smaller than several atomic layers is not easy to perform. For that reason, we expose in this work the effects of the thicknesses of thin films on the evolution of the density, where several samples are analyzed. The samples selected structures are thin films deposited on substrates, these coatings have thicknesses varying from a few atomic layers to ten or so micrometers and can change the properties of the substrate on which they are deposited. To do so, we considered a great number of layers (Cr, Al, SiO{sub 2}, ZnO, Cu, AlN, Si{sub 3}N{sub 4}, SiC) deposited on different substrates (Al{sub 2}O{sub 3}, Cu and Quartz). It is first shown that the density exhibits a dispersive behaviour. Such a behaviour is characterized by an initial increase (or decrease) followed by a saturated region. Further investigations of these dependences led to the determination of a semi-empirical universal relations, ρ=f(h/λ{sub T}), for all the investigated layer/substrate combination. Such expression could be of great importance in the density prediction of even layers thicknesses.

36 MATERIALS SCIENCE↗