Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All quantum dot mode-locked semiconductor disk laser emitting at 655 nm

We present a semiconductor disk laser mode-locked by a semiconductor saturable absorber mirror (SESAM) with emission in the red spectral range. Both the gain and the absorber structure are fabricated by metal-organic vapor-phase epitaxy in an anti-resonant design using quantum dots as active material. A v-shaped cavity is used to tightly focus onto the SESAM, producing pulses with a duration of about 1 ps at a repetition rate of 852 MHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dual-wavelength excited photoluminescence spectroscopy of deep-level hole traps in Ga(In)NP

By employing photoluminescence (PL) spectroscopy under dual-wavelength optical excitation, we uncover the presence of deep-level hole traps in Ga(In)NP alloys grown by molecular beam epitaxy (MBE). The energy level positions of the traps are determined to be at 0.56 eV and 0.78 eV above the top of the valance band. We show that photo-excitation of the holes from the traps, by a secondary light source with a photon energy below the bandgap energy, can lead to a strong enhancement (up to 25%) of the PL emissions from the alloys under a primary optical excitation above the bandgap energy. We further demonstrate that the same hole traps can be found in various MBE-grown Ga(In)NP alloys, regardless of their growth temperatures, chemical compositions, and strain. The extent of the PL enhancement induced by the hole de-trapping is shown to vary between different alloys, however, likely reflecting their different trap concentrations. The absence of theses traps in the GaNP alloy grown by vapor phase epitaxy suggests that their incorporation could be associated with a contaminant accompanied by the N plasma source employed in the MBE growth, possibly a Cu impurity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling a three dimensional electron slab of graded Al{sub x}Ga{sub 1−x}N

Polarization induced degenerate n-type doping with electron concentrations up to ∼10{sup 20 }cm{sup −3} is achieved in graded Al{sub x}Ga{sub 1−x}N layers (x: 0% → 37%) grown on unintentionally doped and on n-doped GaN:Si buffer/reservoir layers by metal organic vapor phase epitaxy. High resolution x-ray diffraction, transmission electron microscopy, and electron dispersive x-ray spectroscopy confirm the gradient in the composition of the Al{sub x}Ga{sub 1−x}N layers, while Hall effect studies reveal the formation of a three dimensional electron slab, whose conductivity can be adjusted through the GaN(:Si) buffer/reservoir.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Asymmetry of the Defect Structure of Semipolar GaN Grown on Si(001)

The defect structure of a thick (~15 μm) semipolar gallium nitride (GaN) layer grown by hydride–chloride vapor phase epitaxy on a Si(001) substrate with buffer layers has been studied by transmission electron microscopy. The asymmetry of the defect structure of GaN epilayer has been revealed and analyzed. The influence of this asymmetry on the rate of decrease in the density of threading dislocations in the growing epitaxial layer is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InGaN/GaN light-emitting diode microwires of submillimeter length

Microcrystalline wire-like InGaN/GaN light-emitting diodes designed as core–shell structures 400–600 μm in length are grown by metal–organic vapor-phase epitaxy on sapphire and silicon substrates. The technology of the titanium-nanolayer-induced ultrafast growth of nanowire and microwire crystals is used. As a current is passed through the microcrystals, an electroluminescence signal is observed in the blue–green spectral region.

36 MATERIALS SCIENCE↗

Mode-locked red-emitting semiconductor disk laser with sub-250 fs pulses

We report on passive mode locking of a semiconductor disk laser emitting pulses shorter than 250 fs at 664 nm with a repetition frequency of 836 MHz. A fast saturable absorber mirror fabricated by metal-organic vapor-phase epitaxy in a near-resonant design was used to enable the mode locking operation. It includes two GaInP quantum wells located close to the surface and an additional fused silica coating. The emission spectrum shows the superposition of a soliton-like part and a smaller “continuum” part.

36 MATERIALS SCIENCE↗

Specific Features of the Luminescence of ZnO:Te/GaN/Al{sub 2}O{sub 3} Heterostructures

High-quality heteroepitaxial (0001)ZnO:Te/(0001)GaN/(0001)Al{sub 2}O{sub 3} structures have been grown by hydrogen vapor-phase epitaxy in a low-pressure continuous flow reactor. X-ray diffraction analysis of these heterostructures has been carried out, which revealed the high structural quality of thin zinc oxide layers. The surface morphology and specific features of UV photoluminescence of the ZnO/GaN/Al{sub 2}O{sub 3} heterostructure have been analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stimulated Emission in the 1.3–1.5 μm Spectral Range from AlGaInAs Quantum Wells in Hybrid Light-Emitting III–V Heterostructures on Silicon Substrates

Hybrid laser structures with AlGaInAs quantum wells are grown by metalorganic vapor phase epitaxy on Ge/Si(100) “virtual” substrates using GaAs and InP buffer layers. Stimulated emission is achieved under optical pumping of the prepared samples in the range of 1.3–1.5 μm at liquid-nitrogen temperature. The stimulated-emission threshold is 30–70 kW/cm{sup 2}.

36 MATERIALS SCIENCE↗

Module of Laser-Radiation (λ = 1064 nm) Photovoltaic Converters

The results of a study and the development of a module designed for energy transmission via atmospheric channels are presented. The four-cell module based on single-junction metamorphic InGaAs/GaAs converters grown by metal-organic vapor-phase epitaxy has an open-circuit voltage of ~3 V. It is shown that the monochromatic efficiency (at a wavelength of 1064 nm) of this module is 31.5% under exposure to a Xe-lamp with a radiation power of 1.5 W/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of the Si-doped GaN/Al{sub 2}O{sub 3} films

Morphological and optical studies of the Si-doped GaN films (doping level N{sub Si} = 1.5 x 10{sup 19} cm{sup -3}) grown by vapor-phase epitaxy from metalorganic compounds on a sapphire substrate oriented along the c axis are conducted. For the grown GaN films, the following characteristics are obtained: energy of electron transition E{sub 0}, absorption coefficient {alpha}, refractive index n, and frequencies of transverse and longitudinal optical lattice vibrations characteristic of the crystalline GaN films.

36 MATERIALS SCIENCE↗

Arsenic antisite and oxygen incorporation trends in GaAs grown by water-mediated close-spaced vapor transport

Close-spaced vapor transport (CSVT) provides a plausible path to lower the costs of GaAs deposition as it uses only solid precursors and provides precursor utilization in principle approaching 100%. However, the use of H 2 O as a transport agent causes O to be incorporated in CSVT films, and O has been associated with a number of electrically active defect centers in GaAs, which decrease minority carrier lifetimes. In this paper, using deep-level transient spectroscopy, we study the effect of H 2 O concentration and substrate temperature on electron trap concentrations in n-type GaAs. We find that the most-prominent O-related center (ELO) typically has a much higher concentration than the center usually associated with As antisites (EL2), but that overall defect concentrations can be as low as those in films deposited by common vapor phase techniques. The trends with increasing H 2 O concentration suggest that ELO is most likely a defect complex with two As antisites. We also consider the optimal conditions for achieving high growth rates and low defect concentrations using CSVT. Finally, the results of this study have implications for the future CSVT growth using halide transport agents, where the ELO defect would be eliminated but EL2 might have a higher concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Green cubic GaInN/GaN light-emitting diode on microstructured silicon (100)

GaInN/GaN light-emitting diodes free of piezoelectric polarization were prepared on standard electronic-grade Si(100) substrates. Micro-stripes of GaN and GaInN/GaN quantum wells in the cubic crystal structure were grown on intersecting (111) planes of microscale V-grooved Si in metal-organic vapor phase epitaxy, covering over 50% of the wafer surface area. Crystal phases were identified in electron back-scattering diffraction. A cross-sectional analysis reveals a cubic structure virtually free of line defects. Electroluminescence over 20 to 100 μA is found fixed at 487 nm (peak), 516 nm (dominant). Such structures therefore should allow higher efficiency, wavelength-stable light emitters throughout the visible spectrum.

36 MATERIALS SCIENCE↗

Stimulated Emission at 1.3-μm Wavelength in Metamorphic InGaAs/InGaAsP Structure with Quantum Wells Grown on Ge/Si(001) Substrate

A laser structure comprising metamorphic InGaAsP layer and InGaAs quantum wells on a non-inclined Si(001) substrate with relaxed Ge buffer layer has been grown for the first time by metal-organic vapor phase epitaxy (MOVPE). The optically pumped lasers exhibit stimulated emission at a wavelength of 1.3 μm. At liquid-nitrogen temperature, the threshold power density of pumping at 0.8 μm amounted to 250 kW/cm{sup 2}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

ZIF‐8 Membrane Permselectivity Modification by Manganese(II) Acetylacetonate Vapor Treatment

Vapor-phase treatment of ZIF-8 membranes with manganese(II) acetylacetonate (Mn(acac) 2 ) allows permselectivity tuning. Propylene/propane selectivity increases from 31 to 210 after the Mn(acac) 2 treatment at 165 °C for 30 min, while selectivities increase from 14.6 to 242 for H 2 /CH 4 , from 2.9 to 38 for CO 2 /CH 4 , from 2.4 to 29 for CO 2 /N 2 , and from 2.9 to 7.5 for O 2 /N 2 , after Mn(acac) 2 treatment at 175 °C for 30 min. Stable equimolar propylene/propane mixture selectivity of 165 at ambient temperature and 4 bar equimolar feed with a propylene flux of 8.3×10 −4 mol m −2 s −1 is established. Furthermore, a control experiment excludes thermal treatment alone causing these changes. XPS analysis reveals the presence of Mn(acac) 2 on the outer surface of the vapor-treated ZIF-8 membranes while no other changes are detectable by X-ray diffraction and infrared spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cyan laser diode grown by plasma-assisted molecular beam epitaxy

We demonstrate AlGaN-cladding-free laser diodes (LDs), operating in continuous wave (CW) mode at 482 nm grown by plasma-assisted molecular beam epitaxy (PAMBE). The maximum CW output power was 230 mW. LDs were grown on c-plane GaN substrates obtained by hydride vapor phase epitaxy. The PAMBE process was carried out in metal-rich conditions, supplying high nitrogen flux (Φ{sub N}) during quantum wells (QWs) growth. We found that high Φ{sub N} improves quality of high In content InGaN QWs. The role of nitrogen in the growth of InGaN on (0001) GaN surface as well as the influence of LDs design on threshold current density are discussed.

36 MATERIALS SCIENCE↗

GaInAsP/InP-Based Laser Power Converters (λ = 1064 nm)

Photovoltaic laser-power converters with irradiation of the substrate side are developed based on lattice-matched GaInAs/InP heterostructures formed by metal-organic vapor-phase epitaxy. Variants of antireflection coatings with a reflection minimum at a wavelength of λ = 1064 nm as well as features of chip bonding using soldering pastes with different melting points are considered. The efficiency of 34.5% (1.2 W, λ =1064 nm) is achieved for the converters with the area of 3.5 × 3.5 mm{sup 2} at uniform radiation conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the Combined Application of Raman Spectroscopy and Photoluminescence Spectroscopy for the Diagnostics of Multilayer Heterostructures

The results of studying GaInAs/GaInP/GaAs photodiode structures grown by metal–organic vapor-phase epitaxy are reported. A procedure for the diagnostics of such multilayer structures is developed. The procedure is based on the application of Raman spectroscopy in combination with photoluminescence spectroscopy in the mode of the lateral scanning of transverse cleavages. The compositions of the GaInAs and GaInP solid solutions are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular Beam Epitaxy of Monocrystalline GaAs on Water-Soluble NaCl Thin Films

The goal of this project was to demonstrate the feasibility of employing an epitaxial NaCl thin film as a water-soluble release layer for III-V photovoltaic devices and GaAs substrate reuse. Over the course of this project efforts were focused on: 1) achieving crystalline NaCl thin films on GaAs (100) substrate, 2) exploring the growth parameters for subsequent GaAs on NaCl thin films in effort to improve crystallinity of the semiconductor layer, 3) deposition and removal of single crystalline solar cell devices from the parent substrate, and 4) improving morphology and reducing large scale defects in the removed layers to fabricate a working a solar cell device. There was no previous work on direct integration of GaAs/NaCl/GaAs heterostructures at the time of this study. We used molecular beam epitaxy (MBE) to deposit both the alkali halide salt and subsequent III-V material in the same chamber, with no vacuum break. Single crystalline GaAs films were achieved on NaCl layers through careful tuning of the growth parameters and exposure to the reflection high energy electron diffraction (RHEED) beam. Dissolution of the NaCl layer in water provided rapid release of the semiconductor layer from the substrate. Monocrystalline solar cells were grown on the III-V templates using MBE and dynamic hydride vapor phase epitaxy (HVPE). However, the extended time at elevated temperatures required for the cell growth resulted in large area defects from fusion of the semiconductor overlayer to the substrate, causing shorts in fabricated devices. By changing the way that the template layer was grown, the density of these defects could be reduced. Unfortunately, the defects were not reduced to a level allowing for fabrication of a working device.

14 SOLAR ENERGY↗