Search NASA⌕ Search

SEARCH · Search NASA

Results for “Variational”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Solar Cycle Variations in Mesospheric Carbon Monoxide

As an extension of Lee et al. (2013), solar cycle variation of carbon monoxide (CO) is analyzed with MLS observation, which covers more than thirteen years (2004-2017) including maximum of solar cycle 24. Being produced primarily by the carbon dioxide (CO2) photolysis in the lower thermosphere, the variations of the mesospheric CO concentration are largely driven by the solar cycle modulated ultraviolet (UV) variation. This solar signal extends down to the lower altitudes by the dynamical descent in the winter polar vortex, showing a time lag that is consistent with the average descent velocity. To characterize a global distribution of the solar impact, MLS CO is correlated with the SORCE measured total solar irradiance (TSI) and UV. As high as 0.8 in most of the polar mesosphere, the linear correlation coefficients between CO and UV/TSI are more robust than those found in the previous work. The photochemical contribution explains most (68%) of the total variance of CO while the dynamical contribution accounts for 21% of the total variance at upper mesosphere. The photochemistry driven CO anomaly signal is extended in the tropics by vertical mixing. The solar cycle signal in CO is further examined with the Whole Atmosphere Community Climate Model (WACCM) 3.5 simulation by implementing two different modeled Spectral Solar Irradiances (SSIs): SRPM 2012 and NRLSSI. The model simulations underestimate the mean CO amount and solar cycle variations of CO, by a factor of 3, compared to those obtained from MLS observation. Different inputs of the solar spectrum have small impacts on CO variation.

MLS↗

Telescopic Observations of Lunar Hydration: Variations and Abundance

Prior to 2009, the Moon was believed to be anhydrous. However, observations by three spacecraft revealed a hydrated surface by reporting a 3 μm absorption band attributed to hydroxyl and possibly molecular water. The Moon Mineralogy Mapper (M3) spectrometer, onboard the Chandrayaan-1 spacecraft is mainly used to study the lunar 3 μm band but its spectral range ends at 3 μm. The limited wavelength range of M3 has allowed observed variations in the 3 μm band to be called into question due to uncertainties in thermal corrections. To investigate the validity of variations in the lunar 3 μm band, we used the SpeX infrared spectrograph at the NASA InfraRed Telescope Facility at Maunakea Observatory in Hawaiʻi. With SpeX, we are able to obtain lunar data over a wavelength range of 1.67 to 4.2 μm at 1 – 2 km spatial resolution. The long wavelengths provide strong constraints on thermal emission corrections. We confirm that the 3 μm band varies with lunar time of day as well as with latitude and composition. Each observation reveals strong variations in abundances of hydroxyl and possibly molecular water. The data reveal a decrease in abundance with increasing lunar local time, an asymmetric trend about the equator that favors the southern latitudes, and higher concentrations in highland regions. The longer wavelengths provided by SpeX have allowed us to examine variations in the 3 μm band and provide definitive evidence that the variations are due to changes in hydration.

C. I. Honniball↗

Global Precipitation Means and Variations with the New Version of GPCP

Knowledge of global precipitation means, patterns and variations is essential for understanding the global water cycle. The observation-based global analysis of the Global Precipitation Climatology Project (GPCP) has been a key input to many such studies, including those related to means of the global (and regional) water and energy cycles. A new version (Version 3.1) of the GPCP monthly analysis is now available (1983-2019), with finer spatial resolution (0.5º latitude/longitude), updated satellite algorithms, latest gauge analysis over land from the Global Precipitation Climatology Center (GPCC), and with ocean climatologies adjusted using information from the Tropical Rainfall Measuring Mission (TRMM), the Global Precipitation Measurement (GPM) mission and CloudSat. The presentation will give key findings from the new analysis, compare with the previous version, link to studies of the water cycle and compare to CMIP6 climate model results. The GPCP Monthly V3.1 analysis uses a Tropical Composite Climatology (TCC) using 22 years (1998-2019) of TRMM and GPM-based surface precipitation estimates from passive microwave, radar and combined passive microwave and radar observations to adjust the long-term mean values in the tropics over ocean. At higher latitudes over ocean climatological values of merged CloudSat and GPM combined passive microwave and radar surface precipitation estimates are used. The result of the new algorithms and procedures is an ocean mean value 60º N to 60º S of 3.2 mm/d, an increase of 7% from the older V2.3. Over land the gauge analysis (from GPCC in Germany), combined with satellite estimates results in a small decrease (~ 0.5%) from the previous version, giving a total global precipitation mean of 2.81 mm/d for V3.1, an increase of 4.5%. Variations from inter-annual to trend scales over most of the ocean are driven by the Colorado State University (CSU) Goddard Profiling (GPROF) algorithm applied to SSMI/SSMIS satellite data. The new GPCP version retains a near zero trend of global precipitation, with significant positive trends in the deep tropics along the Pacific ITCZ and elsewhere, countered by middle latitude decreases, very similar to the previous version of the GPCP Monthly analysis. The pattern of trends is similar to that of AMIP climate model results, driven by observed SSTs for the period in question, but very different from results for “free-running” CMIP historical ensembles, likely due in part to the relatively short comparison period and effects of inter-decadal variations in the GPCP and AMIP results that are not in the “history” models. Interannual variations are also nearly the same in the new version, but with finer detail, although ENSO variations over the ocean have slightly larger amplitude than before, an effect likely related to the change in ocean satellite algorithm used in Version 3. For precipitation intensity (percentiles) at the monthly scale, especially in the tropics, GPCP shows a positive trend for the upper one third of the percentiles (Pct ≥ 70th) and a much weaker positive trend for the lowest percentiles (Pct ≤ 10th), while negative trends appear for the middle one-half percentiles (20th-65th). AMIP results agree with those from the GPCP in terms of the sign of the changes/trends for high and intermediate percentiles. The CMIP historical results also agree in the sign of the trends, but the trends are weaker. Comparisons with other types of CMIP historical simulations including the GHG-only, aerosol-only, and nature-only runs suggest that the observed changes/trends in precipitation amount and intensity during the GPCP period are dominated by a combination of the effects of the Pacific Decadal Oscillation (PDO) and anthropogenic GHG-related surface warming.

Robert Adler↗

Accounting for the photochemical variation in stratospheric NO2 in the SAGE III/ISS solar occultation retrieval

The Stratospheric Aerosol and Gas Experiment (SAGE) III has been operating on the International Space Station (ISS) since mid-2017. Nitrogen dioxide (NO2) number density profiles are routinely retrieved from SAGE III/ISS solar occultation measurements in the middle atmosphere. Although NO2 density varies throughout the day due to photochemistry, the standard SAGE NO2 retrieval algorithm neglects these variations along the instrument’s line of sight by assuming that the number density has a constant gradient within a given vertical layer of the atmosphere. This assumption will result in a retrieval bias for a species like NO2 that changes rapidly across the terminator. In this work we account for diurnal variations in retrievals of NO2 from the SAGE III/ISS measurements, and we determine the impact of this algorithm improvement on the resulting NO2 number densities. The first step in applying the diurnal correction is to use publicly available SAGE III/ISS products to convert the retrieved number density profiles to optical depth profiles. The retrieval is then re-performed with a new matrix that applies photochemical scale factors for each point along the line of sight according to the changing solar zenith angle. In general NO2 that is retrieved by accounting for these diurnal variations is more than 10% lower than the standard algorithm below 30 km. This effect is greatest in winter at high latitudes and generally greater for sunrise occultations than sunset. Comparisons with coincident profiles from the Optical Spectrograph and InfraRed Imager System (OSIRIS) show that NO2 from SAGE III/ISS is generally biased high; however the agreement improves by up to 20% in the mid-stratosphere when diurnal variations are accounted for in the retrieval. We conclude that diurnal variations along the SAGE III/ISS line of sight are an important term to consider for NO2 analyses at altitudes below 30 km.

Stratospheric NO2↗

Ice Accretion Roughness Variations on a Hybrid CRM65-Midspan Wing Model

Ice accretion roughness measurements were performed in the Icing Research Tunnel (IRT) at NASA Glenn Research Center for the Hybrid CRM65-Midspan model in a range of icing conditions. The Hybrid CRM65-Midspan model was chosen for this investigation because 1) the model exhibits high sweep relative to models previously explored in the roughness investigations, 2) the model has leading edge characteristics similar to wing shapes currently used in mid-size commercial airliners, and 3) the sweep and thickness ratios relate better to hybrid lifting body designs for N+2 and N+3 vehicles than other models available. The investigation consisted of multiple sets of tests which focused on 1) 0-angle of attack cases replicating the conditions employed by Anderson et al. (1998) using both Appendix C and SLD cloud conditions, 2) cases based on the “Max Scallop” case by Broeren et al. (2016) and a “High Temperature” case with cloud properties similar to the “Max Scallop” case. Additional tests were performed 1) based on the “Max Scallop” case with variations in freestream static temperature and 2) using test section speeds near 10,000-hold flight conditions. The point clouds were characterized using the approach of McClain and Kreeger (2013) for the ice roughness variations and using the approach of McClain (2016) for the mean ice thickness variations. The resulting roughness and mean thickness variations generally follow the temporal scaling previously identified using on airfoil models without sweep, but the collapse of the time progression profiles is not as tight as found for past measurements on models without sweep. LEWICE and modified panel-method predictions were used explore spatial roughness variations and to compare to the roughness correlations developed by McClain et al. (2021) for the “Max Scallop” cases.

Icing↗

Defining Change Thresholds: What Change Is Outside Typical Sources of Variation?

Researchers often have a difficult time defining meaningful thresholds for change. We sometimes identify subtle changes but what amount of change is beyond typical sources of variation? This is especially complicated when trying to understand new disease pathogenesis like the constellation of eye changes leading to Spaceflight-associated Neuro-ocular Syndrome (SANS). To support decision makers in defining minimal meaningful change, we used a Bayesian hierarchical model to estimate innate sources of variability such as natural day to day variation. Healthy subjects were recruited and imaged with MRI, OCT, and US on separate days and measured by several technicians. Models were developed specifying random effects for the sources of variation – between left and right eyes, within-individuals over time, between raters, and finally between individuals. This allowed us to find the posterior distribution for the total typical variation, within an eye, which we use to define a threshold where change beyond typical sources of variation is likely. This threshold is now used as our earliest indicator of systematic increase in Total Retinal Thickness (a precursor to optic disc edema).

Millennia Young↗

Transverse Kick Analysis of SSR1 Due to Possible Geometrical Variations in Fabrication

Due to fabrication tolerance, it is expected that some geometrical variations could happen to the SSR1 cavities of Project X, like small shifts in the transverse direction of the beam pipe or the spoke. It is necessary to evaluate the resultant transverse kick due to these geometrical variations, in order to make sure that they are within the limits of the correctors in the solenoids. In this paper, we report the transverse kick values for various fabrications errors and the sensitivity of the beam to these errors. Transverse kick that could happen in SSR1 cavities due to geometrical variations of the fabricated cavities from the designed geometry has been analysed and evaluated. From fabrication experience, three kinds of variations were under investigation concerning the alignment of both the beam pipe and spoke with respect to the beam axis. Simulation study has been carried out implementing these variations in the simulation model. CMM measurements of five fabricated SSR1 cavities were carried out to investigate the amount of physical misalignments of the beam pipe and spoke. Bead-pull measurements were also conducted to evaluate the transverse kick values in the fabricated cavities. Simulation and measurements are relatively in good agreement. Maximum kick in the fabricated cavities is within 154 keV that would induce about 1.12 mrad beam deviation, which could be definitely corrected with the 10 mrad specified correctors of Project X.

43 PARTICLE ACCELERATORS↗

Variational reactivity estimates: new analyses and new results

A modified form of the variational estimate of the reactivity worth ofa perturbation was previously developed to extend the range of applicability of variational perturbation theory for perturbations leading to negative reactivity worths. Recent numerical results challenged the assumptions behind the modified form. In this paper, more results are obtained, leading to the conclusion that sometimes the modified form extends the range ofapplicability of variational perturbation theory for positive reactivity worths as well, and sometimes the standard variational form is more accurate for negative-reactivity perturbations. In addition, this paper proves that using the exact generalized adjoint function would lead to an inaccurate variational reactivity estimate when the error in the first-order estimate is large; the standard generalized adjoint function, an approximation to the exact one, leads to Lore accurate results. This conclusion is also demonstrated numerically. Transport calculations use the PARTISN multi group discrete ordinates code

97 MATHEMATICS AND COMPUTING↗

Minimizing thickness variation in monolithic U-10Mo fuel foil and Zr interlayer during hot rolling: A microstructure-based finite element method analysis

Low-enriched uranium alloyed with 10 wt. % molybdenum (U-10Mo) has been identified as a promising alternative to highly enriched uranium fuel for the United States’ high performance research reactors. The monolithic U-10Mo fuel plate consists of a metallic U-10Mo fuel foil with a 25 µm Zr interlayer and a relatively thick cladding of aluminum alloy 6061. The Zr interlayer is typically applied during the hot co-rolling process, and this process dictates the uniformity of the Zr interlayer. Thickness variation observed in the U-10Mo and Zr interlayer has been attributed to several sources: the initial grain size of the U-10Mo castings, can materials, rolling temperature, inhomogeneous molybdenum content, and porosity in the cast U-10Mo. This thickness variation limits the ability to meet the dimensional specification; thus, a better understanding of the factors causing the nonuniform thickness is needed. In this work, we used a novel, microstructure-based finite element method to model the hot rolling process to address these concerns. Grain microstructures in U-10Mo were tessellated and explicitly considered in the finite element model. Each grain was assigned a random material property to mimic the grain strength variations induced by different grain orientations. Simulations were performed using six steel can thicknesses, four grain sizes, and with or without a Zr interlayer to investigate the influences of those variables on the thickness nonuniformity. The simulation results showed that a thinner steel can and finer U-10Mo grain size reduce thickness variations in both the U-10Mo fuel foil and Zr interlayer. The direct findings from the simulations and analysis can be used to optimize the hot rolling schedule, reduce fabrication defects, and meet the dimensional specifications. The proposed microstructure-based finite element model can be also coupled with experimental microstructure characterization data, images, and models to simulate multi-pass hot rolling.

36 MATERIALS SCIENCE↗

Observation of daily and annular variations in the {sup 214}Po half-life

Results: of the analysis of a time series of values of the half-life (τ) of the {sup 214}Po nucleus with a different time step obtained from the TAU-1 (354 days) and TAU-2 (973 days) installations are presented. The annual variation with an amplitude of (9.8 ± 0.6) × 10{sup −4} and daily variations in the solar, lunar, and sidereal times with amplitudes of (5.3 ± 0.3) × 10{sup −4}, (6.9 ± 2.0) × 10{sup −4}, and (7.2 ± 1.2) × 10{sup −4}, respectively, are found in the series of τ values. It is shown that variations in microclimatic parameters cannot be a cause of τ variations.

07 ISOTOPE AND RADIATION SOURCES↗

Benchmarking Quantum Chemistry Computations with Variational, Imaginary Time Evolution, and Krylov Space Solver Algorithms

Quantum chemistry is a key application area for noisy-intermediate scale quantum (NISQ) devices, and therefore serves as an important benchmark for current and future quantum computer performance. Previous benchmarks in this field have focused on variational methods for computing ground and excited states of various molecules, including a benchmarking suite focused on the performance of computing ground states for alkali-hydrides under an array of error mitigation methods. State-of-the-art methods to reach chemical accuracy in hybrid quantum-classical electronic structure calculations of alkali hydride molecules on NISQ devices from IBM are outlined here. Here it is demonstrated how to extend the reach of variational eigensolvers with symmetry preserving Ansätze. Next, it is outlined how to use quantum imaginary time evolution and Lanczos as a complementary method to variational techniques, highlighting the advantages of each approach. Finally, a new error mitigation method is demonstrated which uses systematic error cancellation via hidden inverse gate constructions, improving the performance of typical variational algorithms. These results show that electronic structure calculations have advanced rapidly, to routine chemical accuracy for simple molecules, from their inception on quantum computers a few short years ago, and they point to further rapid progress to larger molecules as the power of NISQ devices grows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anatomical Variations of the Popliteal Artery and its Tibial Branches: Analysis in 1242 Extremities

The purpose of this study was to analyze the variations in branching of the popliteal artery by reviewing femoral arteriograms. Between 2004 and 2006, digital subtraction angiographies of both lower extremities were performed in 621 patients. We reviewed these 1242 arteriograms retrospectively in order to analyze the branching pattern of the popliteal artery. Of the 1242 extremities, 1108 extremities (89.2%) had normal branching pattern of the popliteal artery. The remaining 134 extremities (10.8%; 65 right, 69 left) in 105 patients (66 men, 39 women; 76 unilateral, 29 bilateral) showed seven variant branching patterns: hypoplastic or aplastic posterior tibial artery (PT) (n = 63, 5.1%); hypoplastic or aplastic anterior tibial artery (AT) (n = 21, 1.7%); trifurcation (n = 19, 1.5%); high origin of AT (n = 15, 1.2%); hypoplastic or aplastic PT and AT (n = 10, 0.8%); high origin of PT (n = 5, 0.4%); and anterior tibioperoneal trunk (n = 1, 0.1%). When the branching pattern of the popliteal artery is normal in one extremity, there is a 13% probability the other side will be a variant pattern. When the branching pattern is variant in one extremity, there is a 28% probability the opposite side will also contain a variation. Variations in branching of the popliteal artery are not uncommon. Awareness of these variations is important for evaluation of the lower extremity arteriograms and has clinical implications for vascular surgeons and interventional radiologists.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Spatial Variation of Soil CO 2 , CH 4 and N 2 O Fluxes Across Topographical Positions in Tropical Forests of the Guiana Shield

The spatial variation of soil greenhouse gas fluxes (GHG; carbon dioxide—CO 2 , methane—CH 4 and nitrous oxide—N 2 O) remains poorly understood in highly complex ecosystems such as tropical forests. Here, we used 240 individual flux measurements of these three GHGs from different soil types, at three topographical positions and in two extreme hydric conditions in the tropical forests of the Guiana Shield (French Guiana, South America) to (1) test the effect of topographical positions on GHG fluxes and (2) identify the soil characteristics driving flux variation in these nutrient-poor tropical soils. Surprisingly, none of the three GHG flux rates differed with topographical position. CO 2 effluxes covaried with soil pH, soil water content (SWC), available nitrogen and total phosphorus. The CH 4 fluxes were best explained by variation in SWC, with soils acting as a sink under drier conditions and as a source under wetter conditions. Unexpectedly, our study areas were generally sinks for N 2 O and N 2 O fluxes were partly explained by total phosphorus and available nitrogen concentrations. This initial work describing the spatial variation of soil fluxes of the three main GHGs measured simultaneously in forests of the Guiana Shield lays the foundation for specific studies of the processes underlying the observed patterns.

54 ENVIRONMENTAL SCIENCES↗

Linguistic variation in functional types of statutory law

When the meaning of an ambiguous word, phrase or grammatical structure in a statutory provision is disputed, courts are tasked with identifying the best meaning of the contested language. A common method of resolving linguistic ambiguities is to investigate the meaning of the contested word or structure in statutory provisions with similar subject matter. While the subject matter of a text has a demonstrated effect on language use, register variation research shows that the function of a text is also highly influential in predicting linguistic variation. Thus far, the function of a statutory provision (e.g., obligation to act, authorization to act) has not been considered in legal interpretative research. In the present study, I investigate the extent to which function influences the lexico-grammatical characteristics of statutory texts. 2,573 statutory provisions from the Arizona State Code are individually assigned to one of seven categories representing their function: Duties, Permissions, Impersonal Rules, Operational Definitions, Prohibitions, Procedural Guidelines, and Criminal Offenses. Key feature analysis is used to identify and describe patterns of lexico-grammatical variation between the seven functional types. Results reveal a great deal of lexico-grammatical variation associated with function in the register of statutory law. Furthermore, some functional types of statutory provisions are more linguistically distinct than others. In conclusion, these findings suggest that it may be beneficial to consider communicative function when investigating legal interpretative questions.

99 GENERAL AND MISCELLANEOUS↗

Variations in Target Volume Definition for Postoperative Radiotherapy in Stage III Non-Small-Cell Lung Cancer: Analysis of an International Contouring Study

Purpose: Postoperative radiotherapy (PORT) in patients with completely resected non-small-cell lung cancer with mediastinal involvement is controversial because of the failure of earlier trials to demonstrate a survival benefit. Improved techniques may reduce toxicity, but the treatment fields used in routine practice have not been well studied. We studied routine target volumes used by international experts and evaluated the impact of a contouring protocol developed for a new prospective study, the Lung Adjuvant Radiotherapy Trial (Lung ART). Methods and Materials: Seventeen thoracic radiation oncologists were invited to contour their routine clinical target volumes (CTV) for 2 representative patients using a validated CD-ROM-based contouring program. Subsequently, the Lung ART study protocol was provided, and both cases were contoured again. Variations in target volumes and their dosimetric impact were analyzed. Results: Routine CTVs were received for each case from 10 clinicians, whereas six provided both routine and protocol CTVs for each case. Routine CTVs varied up to threefold between clinicians, but use of the Lung ART protocol significantly decreased variations. Routine CTVs in a postlobectomy patient resulted in V{sub 20} values ranging from 12.7% to 54.0%, and Lung ART protocol CTVs resulted in values of 20.6% to 29.2%. Similar results were seen for other toxicity parameters and in the postpneumectomy patient. With the exception of upper paratracheal nodes, protocol contouring improved coverage of the required nodal stations. Conclusion: Even among experts, significant interclinician variations are observed in PORT fields. Inasmuch as contouring variations can confound the interpretation of PORT results, mandatory quality assurance procedures have been incorporated into the current Lung ART study.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Diurnal variation of the fair-weather atmospheric electric field in Binchuan, China

With the purpose of understanding the variation of fair-weather atmospheric electric field, the vertical component of atmospheric electric field (recorded as Ez) has been measured in the town Binchuan (25°50'N, 100°34'E, 1438.7 m asl) of Dali city, Yunnan, China from June 14, 2017 to December 1, 2020. Automatic measured visual range is used as a proxy of aerosol concentration. The mean diurnal variation curve of the fair-weather Ez in Binchuan, having two peaks occurred at around 9LT and 20LT, shows little correlation with the well-known Carnegie Curve and other two high-latitude sites' Curves. While strong negative correlation between fair-weather Ez and visual range is found, indicating the variation of fair-weather is dominated by aerosol concentration. The main source of aerosol concentration variation probably sunrise and sunset effect. We support our findings by comparing Ez, visual range with sunrise and sunset times. The peaks (troughs) of Ez (visual range) are proved to have weak correlations with anthropogenic pollution through comparing the Ez, visual range under workdays and holidays.

54 ENVIRONMENTAL SCIENCES↗

An isogeometric variational multiscale method for large-eddy simulation of coupled multi-ion transport in turbulent flow

Highlights: •We present a computational method for coupled multi-ion transport in turbulent flow. •The underlying formulation is a variational multiscale finite element method. •It is combined with the isogeometric concept for electrochemical systems. •Coupled multi-ion transport in fully turbulent Taylor–Couette flow is simulated. •This example is an important model problem for rotating cylinder electrodes. -- Abstract: Electrochemical processes, such as electroplating of large items in galvanic baths, are often coupled to turbulent flow. In this study, we propose an isogeometric residual-based variational multiscale finite element method for multi-ion transport in dilute electrolyte solutions under turbulent flow conditions. In other words, this means that the concepts of isogeometric discretization and variational multiscale methods are successfully combined for developing a method capable of simulating the challenging problem of coupled multi-ion transport in turbulent flow. We present a comprehensive three-dimensional computational method taking into account, among others, coupled convection–diffusion-migration equations subject to an electroneutrality constraint in combination with phenomenological electrode-kinetics modeling. The electrochemical subproblem is one-way coupled to turbulent incompressible flow via convection. Ionic mass transfer in turbulent Taylor–Couette flow is investigated, representing an important model problem for rotating-cylinder-electrode configurations. Multi-ion transport as considered here is an example for mass transport at high Schmidt number (Sc=1389). An isogeometric discretization is especially advantageous for the present problem, since (i) curved boundaries can be represented exactly, and (ii) it has been proven to provide very accurate solutions for flow quantities when being applied in combination with residual-based variational multiscale modeling. We demonstrate that the method is robust and provides results which are in good agreement with direct numerical simulation results as well as empirical mass-transfer correlations reported in literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Variational principles for dissipative (sub)systems, with applications to the theory of linear dispersion and geometrical optics

Applications of variational methods are typically restricted to conservative systems. Some extensions to dissipative systems have been reported too but require ad hoc techniques such as the artificial doubling of the dynamical variables. We propose a different approach. Here, we show that for a broad class of dissipative systems of practical interest, variational principles can be formulated using constant Lagrange multipliers and Lagrangians nonlocal in time, which allow treating reversible and irreversible dynamics on the same footing. A general variational theory of linear dispersion is formulated as an example. Particularly, we present a variational formulation for linear geometrical optics in a general dissipative medium, which is allowed to be nonstationary, inhomogeneous, anisotropic, and exhibit both temporal and spatial dispersion simultaneously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗