Search NASA⌕ Search

SEARCH · Search NASA

Results for “Velocity Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Chandra measurements of gas homogeneity and turbulence at intermediate radii in the Perseus Cluster

ABSTRACT We present a Chandra study of surface brightness fluctuations in the diffuse intracluster medium of the Perseus Cluster. Our study utilizes deep, archival imaging of the cluster core as well as a new mosaic of 29 short $\, 5\,$-ks observations extending in eight different directions out to radii of $r_{500} \sim 2.2\, r_{2500}$. Under the assumption that the distribution of densities at a given radius is log-normally distributed, two important quantities can be derived from the width of the log-normal density distribution on a given spatial scale: the density bias, that is equal to the square root of the clumping factor C; and the one-component turbulent velocity, vk,1D. We forward-model all contributions to the measured surface brightness, including astrophysical and particle background components, and account for the Poisson nature of the measured signal. Measuring the distribution of surface brightness fluctuations in 1 arcmin2 regions, spanning the radial range $0.3\rm {-}2.2\, r_{2500}$ ($7.8\rm {-}57.3\,$ arcmin), we find a small to moderate average density bias of around $3{{\ \rm per\ cent}}$ at radii below $1.6\, r_{2500}$. We also infer an average turbulent velocity at these radii of V1D < 400 km s−1. Direct confirmation of our results on turbulent velocities inferred from surface brightness fluctuations should be possible using the X-ray calorimeter spectrometers to be flown aboard the XRISM and Athena observatories.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Signatures of Light Massive Relics on non-linear structure formation

ABSTRACT Cosmologies with Light Massive Relics (LiMRs) as a subdominant component of the dark sector are well-motivated from a particle physics perspective, and can also have implications for the σ8 tension between early and late time probes of clustering. The effects of LiMRs on the cosmic microwave background (CMB) and structure formation on large (linear) scales have been investigated extensively. In this paper, we initiate a systematic study of the effects of LiMRs on smaller, non-linear scales using cosmological N-body simulations; focusing on quantities relevant for photometric galaxy surveys. For most of our study, we use a particular model of non-thermal LiMRs but the methods developed generalizing to a large class of LiMR models – we explicitly demonstrate this by considering the Dodelson–Widrow velocity distribution. We find that, in general, the effects of LiMR on small scales are distinct from those of a ΛCDM universe, even when the value of σ8 is matched between the models. We show that weak lensing measurements around massive clusters, between ∼0.1 h−1Mpc and ∼10 h−1Mpc, should have sufficient signal-to-noise in future surveys to distinguish between ΛCDM and LiMR models that are tuned to fit both CMB data and linear scale clustering data at late times. Furthermore, we find that different LiMR cosmologies indistinguishable by conventional linear probes can be distinguished by non-linear probes if their velocity distributions are sufficiently different. LiMR models can, therefore, be best tested by jointly analyzing the CMB and late-time structure formation on both large and small scales.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Predicting wind farm operations with machine learning and the P2D‐RANS model: A case study for an AWAKEN site

Abstract The power performance and the wind velocity field of an onshore wind farm are predicted with machine learning models and the pseudo‐2D RANS model, then assessed against SCADA data. The wind farm under investigation is one of the sites involved with the American WAKE experimeNt (AWAKEN). The performed simulations enable predictions of the power capture at the farm and turbine levels while providing insights into the effects on power capture associated with wake interactions that operating upstream turbines induce, as well as the variability caused by atmospheric stability. The machine learning models show improved accuracy compared to the pseudo‐2D RANS model in the predictions of turbine power capture and farm power capture with roughly half the normalized error. The machine learning models also entail lower computational costs upon training. Further, the machine learning models provide predictions of the wind turbulence intensity at the turbine level for different wind and atmospheric conditions with very good accuracy, which is difficult to achieve through RANS modeling. Additionally, farm‐to‐farm interactions are noted, with adverse impacts on power predictions from both models.

17 WIND ENERGY↗
DOE OSTI2024

Data-Efficient Dimensionality Reduction and Surrogate Modeling of High-Dimensional Stress Fields

Tensor datatypes representing field variables like stress, displacement, velocity, etc., have increasingly become a common occurrence in data-driven modeling and analysis of simulations. Numerous methods [such as convolutional neural networks (CNNs)] exist to address the meta-modeling of field data from simulations. As the complexity of the simulation increases, so does the cost of acquisition, leading to limited data scenarios. Modeling of tensor datatypes under limited data scenarios remains a hindrance for engineering applications. Here, in this article, we introduce a direct image-to-image modeling framework of convolutional autoencoders enhanced by information bottleneck loss function to tackle the tensor data types with limited data. The information bottleneck method penalizes the nuisance information in the latent space while maximizing relevant information making it robust for limited data scenarios. The entire neural network framework is further combined with robust hyperparameter optimization. We perform numerical studies to compare the predictive performance of the proposed method with a dimensionality reduction-based surrogate modeling framework on a representative linear elastic ellipsoidal void problem with uniaxial loading. The data structure focuses on the low-data regime (fewer than 100 data points) and includes the parameterized geometry of the ellipsoidal void as the input and the predicted stress field as the output. The results of the numerical studies show that the information bottleneck approach yields improved overall accuracy and more precise prediction of the extremes of the stress field. Additionally, an in-depth analysis is carried out to elucidate the information compression behavior of the proposed framework.

artificial intelligence↗
DOE OSTI2021

Learning unknown physics of non-Newtonian fluids

Here, we use physics-informed neural networks (PINNs) to learn viscosity models of two non-Newtonian systems (polymer melts and suspensions of particles) using only velocity measurements. For synthetic velocity data generated with the power-law viscosity model, the PINN-inferred viscosity model agrees with the analytical model for shear rates with large absolute values but deviates for shear rates near zero where the analytical model has an unphysical singularity. Once the viscosity model is learned the PINN method can solve the momentum conservation equation using only the boundary conditions.

42 ENGINEERING↗
DOE OSTI2022

LOKI

LOKI is a simulation code that models weakly-coupled plasma evolution using Eulerian kinetic models in four phase space dimensions. The code is useful to understand basic plasma nonlinear plasma physics phenomena - in particular, wave-particle and wave-wave resonances that occur in laser plasma interactions. LOKI can simulate fundamental physical process in low-density plasmas on a scale of hundreds of light wavelengths. It does so by solving the relativistic Vlasov and Valsov-Fokker-Planck differential transport equations describing the collision less and low-collisionality evolution of charged particles in electromagnetic fields in two configuration space and two velocity space dimensions. Two principle electromagnetic models are provided: electrostatic (Poisson's Equation) and electromagnetic (Maxwell's equations).

DIMITS, ANDRIS↗
DOE OSTI2023

Machine Learning Application to Assess Occurrence and Saturations of Methane Hydrate in Marine Deposits Offshore India

Artificial Neural Networks (ANN) were used to assess methane hydrate occurrence and saturation in marine sediments offshore India. The ANN analysis classifies the gas hydrate occurrence into three types: methane hydrate in pore space, methane hydrate in fractures, or no methane hydrate. Further, predicted saturation characterizes the volume of gas hydrate with respect to the available void volume. Log data collected at six wells, which were drilled during the India National Gas Hydrate Program Expedition 02 (NGHP-02), provided a combination of well log measurements that were used as input for machine learning (ML) models. Well log measurements included density, porosity, electrical resistivity, natural gamma radiation, and acoustic wave velocity. Combinations of well logs used in the ML models provide good overall balanced accuracy (0.79 to 0.86) for the prediction of the gas hydrate occurrence and good accuracy (0.68 to 0.92) for methane hydrate saturation prediction in the marine accumulations against reference data. The accuracy scores indicate that the ML models can successfully predict reservoir characteristics for marine methane hydrate deposits. In conclusion, the results indicate that the ML models can either augment physics-driven methods for assessing the occurrence and saturation of methane hydrate deposits or serve as an independent predictive tool for those characteristics.

58 GEOSCIENCES↗
DOE OSTI2022

Gravitational waves from global cosmic strings and cosmic archaeology

Global cosmic strings are predicted in many motivated extensions to the Standard Model of particle physics, with close connections to axion dark matter physics. Recent studies suggest that, although subdominant relative to Goldstone emission, gravitational wave (GW) signals from global strings can be detectable with current and planned GW detectors such as LIGO, LISA, DECIGO/BBO, ET/CE and AEDGE/AION, as well as pulsar timing arrays such as PPTA, NANOGrav and SKA. This work is an extensive, updated study on GWs from a global cosmic string network, taking into account of the most recent developments related to the subject. The main analysis is based on the analytical Velocity-dependent One-Scale (VOS) model calibrated with recent simulation results, which provides a generic protocol for such calculations with details given. We also demonstrate how the GW signal can be influenced with variations to the baseline model: this includes considering the uncertainties of model parameters and the potential deviation from the conventional VOS model prediction (i.e. the scaling behavior) as suggested by some of the recent simulation results. Furthermore, we investigated in detail the effect of a non-standard cosmology (e.g. early matter domination or kination) or new particle species on the GW signals from global strings. We demonstrate that the frequency spectrum of GW background from global cosmic strings can be used to probe the cosmic history prior to the Big Bang nucleosynthesis (BBN) (i.e. the primordial dark age) up to a temperature of T ~ 10 8 GeV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Ten-moment fluid model for low-temperature magnetized plasmas

In this paper, a one-dimensional 10-moment multi-fluid plasma model is developed and applied to low-temperature magnetized plasmas. The 10-moment model solves for six anisotropic pressure terms, in addition to density and three components of fluid momentum, which allows the model to capture finite kinetic effects. The results are benchmarked against a 5-moment model, which assumes that the gas constituents follow a Maxwellian velocity distribution function (VDF), and a particle-in-cell Monte Carlo collision model that allows for arbitrary non-Maxwellian VDFs. The models are compared in a one-dimensional, low-temperature, partially magnetized plasma test case. The 10-moment results accurately reproduce the anisotropic temperature profile in low-temperature magnetized plasmas, where shear gradients exist due to the E×B drift. We discuss the mechanisms by which the anisotropic pressure can be generated in low-temperature magnetized plasmas. In addition, the importance of a self-consistent heat flux closure to the 10-moment model is studied, showing consistency with other models only when the assumptions of the underlying model are met. The 10-moment model allows for study of electron inertia effects and non-Maxwellian VDFs without the need for kinetic methods that are more computationally expensive.

Kuldinow, Derek Amur (ORCID:0000000319730196)↗
DOE OSTI2021

Direct Numerical Simulation of Flow Over a Wall-Mounted Cube with the Nek5000 Spectral Element Code: DNS at Re h = 3900

The direct numerical simulation (DNS) of the canonical wall-mounted unit cube subjected to two distinct incident velocity profiles is performed at a Reynolds number where the bulk flow characteristics are known to become relatively Reynolds number insensitive. The aim of this work is to highlight the sensitivity of such bluff-body flows to mean shear and to provide a representative set of data for such flow scenarios where common turbulence modeling techniques often fail. Simple boundary conditions and a small domain are selected to allow for cost-effective and easy comparisons for model development purposes. In addition to mean velocity profiles, select turbulence statistics are presented in detail. Further, the basic efficacy of eddy viscosity models is evaluated and found to be adequate only for the shear stress components for the bluff-body flows examined here. Other failure mechanisms for RANS are proposed.

42 ENGINEERING↗
DOE OSTI2021

Simulation of pellet ELM triggering in low-collisionality, ITER-like discharges

3D nonlinear, as well as 2D linear M3D-C1 simulations are used to model ELM triggering by small pellets in DIII-D discharges in the ITER relevant, peeling-limited pedestal stability regime. A critical pellet size threshold is found in both experiment and modeling depending on pedestal conditions, pellet velocity and injection direction. Using radial injection at the outboard midplane, the threshold is determined by M3D-C1 for multiple time slices of a DIII-D low-collisionality discharge that has pellet ELM triggering. Experimental observations show that a larger pellet size than the standard 1.3 mm diameter is necessary for ELM triggering; 1.8 mm pellets triggered several ELMs in cases where a smaller pellet failed. The M3D-C1 simulations are in good agreement with these observations. While the 2D linear simulations give insight into the change of growth rates for various toroidal modes with pellet size, the 3D nonlinear simulations apply a pellet ablation model that mimics the actual injection with good match to the experiment. The 3D nonlinear simulation confirms the pellet ELM triggering for a pellet size larger than the threshold found by the linear simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Hanford Waste Treatment Plant LAB Facility Stack Effluent Monitoring: Sampling Probe Location Qualification Evaluation

The WTP LAB stack monitor locations were qualified using scale model stacks to mitigate the risk of identifying that sampling locations do not meet the qualification criteria on the full-scale stack. As required by the ANSI/HPS N13.1-1999 standard, the scale model and its sampling location were geometrically similar to the actual stack and the Reynolds numbers for both the actual and model stacks were >10,000. An additional criterion is that the DV of the full-scale stack must be between 1/6 DV and 6 DV of the scale model stack tests. Verification tests of the LAB stacks were performed at normal operating conditions. The maximum 6 DV value from the scale model testing determines the maximum conditions for which the full-scale stack may be operated and remain in compliance with the stack verification criterion. The remaining criteria for the stack verification to be considered valid involve the flow angle and velocity uniformity results. First, the flow angle at the full-scale stack must be = 20°. Second, the velocity uniformity at the full-scale stack must be = 20% COV. Finally, the velocity uniformity results for the actual and scale model stacks must agree within 5% COV. In general, these criteria were met through the full-scale stack tests at the LAB facility. Some specific items for each scale model and full-scale stack comparison should be noted in assessing the validity of the verification tests. The LB-C2 scale model stacks were performed with single fan operations at then-minimum flow conditions. These conditions resulted in DV values that were too low to meet the DV range criterion, and therefore are unable to be used in qualifying single fan operations on the full-scale stack. However, the single fan operations demonstrated COV values for velocity uniformity as well as flow angles that were comparable to the dual-fan operations at high flows. Overall, the test conditions and test results were within the range of acceptable values based on current design flow rates. Single fan operations are expected to only occur infrequently for maintenance needs and is therefore not a planned operating condition at this time. The LB-S1 scale model stacks were performed at three fan combinations, and in each combination, at least one test was performed at the then-minimum flow conditions as well as at then-maximum flow conditions. While the then-minimum flow conditions result in a DV range that is lower than the verification test DV value, and therefore does not meet the criterion, these tests are un-necessary for the verification test acceptance. The normal and maximum flow conditions from the scale model stack tests meet the DV range criterion, and the velocity uniformity test results compare favorably with the full-scale stack results. The LB-S2 scale model stacks were performed at nominally the same maximum flow condition; however, the 6 DV value for Fan A operation was slightly lower than the full-scale stack test DV. The COV values from the scale model stacks were comparable between the Fan A and Fan B results, and the overall test conditions are within the range of acceptable values. The stack verification is therefore considered acceptable for both Fan A and Fan B operations. The verification tests were performed at flows that were appreciably higher than the design conditions, and further elevated flow rates would be beyond the range of acceptable DV. Based on these stack verification test results, the three LAB filtered exhaust stacks meet the qualification criteria provided in the ANSI/HPS N13.1-1999 standard. Further changes to the system configuration or operating conditions that are outside the bounds described in this and the scale model test reports (Glissmeyer, Flaherty, and Piepel (2001), Glissmeyer and Geeting (2013)) may require additional tests and additional analyses to determine compliance with the standard.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Toward Accurate Modeling of Galaxy Clustering on Small Scales: Halo Model Extensions and Lingering Tension

This paper represents an effort to provide robust constraints on the galaxy–halo connection and simultaneously test the Planck ΛCDM cosmology using a fully numerical model of small-scale galaxy clustering. We explore two extensions to the standard Halo Occupation Distribution model: assembly bias, whereby halo occupation depends on both halo mass and the larger environment, and velocity bias, whereby galaxy velocities do not perfectly trace the velocity of the dark matter within the halo. Moreover, we incorporate halo mass corrections to account for the impact of baryonic physics on the halo population. We identify an optimal set of clustering measurements to constrain this "decorated" HOD model for both low- and high-luminosity galaxies in SDSS DR7. We find that, for low-luminosity galaxies, a model with both assembly bias and velocity bias provides the best fit to the clustering measurements, with no tension remaining in the fit. In this model, we find evidence for both central and satellite galaxy assembly bias at the 99% and 95% confidence levels, respectively. In addition, we find evidence for satellite galaxy velocity bias at the 99.9% confidence level. For high-luminosity galaxies, we find no evidence for either assembly bias or velocity bias, but our model exhibits significant tension with SDSS measurements. We find that all of these conclusions still stand when we include the effects of baryonic physics on the halo mass function, suggesting that the tension we find for high-luminosity galaxies may be due to a problem with our assumed cosmological model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Grain boundary velocity and curvature are not correlated in Ni polycrystals

Grain boundary velocity has been believed to be correlated to curvature, and this is an important relationship for modeling how polycrystalline materials coarsen during annealing. We determined the velocities and curvatures of approximately 52,000 grain boundaries in a nickel polycrystal using three-dimensional orientation maps measured by high-energy diffraction microscopy before and after annealing at 800°C. Unexpectedly, the grain boundary velocities and curvatures were uncorrelated. Instead, we found strong correlations between the boundary velocity and the five macroscopic parameters that specify grain boundary crystallography. The sensitivity of the velocity to grain boundary crystallography might be the result of defect-mediated grain boundary migration or the anisotropy of the grain boundary energy. The absence of a correlation between velocity and curvature likely results from the constraints imposed by the grain boundary network and implies the need for a new model for grain boundary migration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Phase-space entropy cascade and irreversibility of stochastic heating in nearly collisionless plasma turbulence

We consider a nearly collisionless plasma consisting of a species of “test particles” in one spatial and one velocity dimension, stirred by an externally imposed stochastic electric field—a kinetic analog of the Kraichnan model of passive advection. The mean effect on the particle distribution function is turbulent diffusion in velocity space—known as stochastic heating. Accompanying this heating is the generation of fine-scale structure in the distribution function, which we characterize with the collisionless (Casimir) invariant C 2 ∝ ∫ ∫ d x d v 〈 f 2 〉 —a quantity that here plays the role of (negative) entropy of the distribution function. We find that C 2 is transferred from large scales to small scales in both position and velocity space via a phase-space cascade enabled by both particle streaming and nonlinear interactions between particles and the stochastic electric field. We compute the steady-state fluxes and spectrum of C 2 in Fourier space, with k and s denoting spatial and velocity wave numbers, respectively. In our model, the nonlinearity in the evolution equation for the spectrum turns into a fractional Laplacian operator in k space, leading to anomalous diffusion. Whereas even the linear phase mixing alone would lead to a constant flux of C 2 to high s (towards the collisional dissipation range) at every k , the nonlinearity accelerates this cascade by intertwining velocity and position space so that the flux of C 2 is to both high k and high s simultaneously. Integrating over velocity (spatial) wave numbers, the k -space ( s -space) flux of C 2 is constant down to a dissipation length (velocity) scale that tends to zero as the collision frequency does, even though the rate of collisional dissipation remains finite. The resulting spectrum in the inertial range is a self-similar function in the ( k , s ) plane, with power-law asymptotics at large k and s . Our model is fully analytically solvable, but the asymptotic scalings of the spectrum can also be found via a simple phenomenological theory whose key assumption is that the cascade is governed by a “critical balance” in phase space between the linear and nonlinear timescales. We argue that stochastic heating is made irreversible by this entropy cascade and that, while collisional dissipation accessed via phase mixing occurs only at small spatial scales rather than at every scale as it would in a linear system, the cascade makes phase mixing even more effective overall in the nonlinear regime than in the linear one. Published by the American Physical Society 2024

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A comparative study of machine learning models for predicting the state of reactive mixing

Mixing phenomena are important mechanisms controlling flow, species transport, and reaction processes in fluids and porous media. Accurate predictions of reactive mixing are critical for many Earth and environmental science problems such as contaminant fate and remediation, macroalgae growth, and plankton biomass evolution. Here, to investigate the evolution of mixing dynamics under different scenarios (e.g., anisotropy, fluctuating velocity fields), a finite-element-based numerical model was built to solve the fast, irreversible bimolecular reaction-diffusion equations to simulate a range of reactive-mixing scenarios. A total of 2,315 simulations were performed using different sets of model input parameters comprising various spatial scales of vortex structures in the velocity field, time-scales associated with velocity oscillations, the perturbation parameter for the vortex-based velocity, anisotropic dispersion contrast (i.e., ratio of longitudinal-to-transverse dispersion), and molecular diffusion. The outputs comprised concentration profiles of reactants and products. The inputs to and outputs from these simulations were concatenated into feature and label matrices, respectively, to train 20 different machine learning (ML) models intended to emulate system behavior. These 20 ML emulators, based on linear methods, Bayesian methods, ensemble learning methods, and multilayer perceptrons (MLPs), were trained to classify the state of mixing and predict three quantities of interest (QoIs) characterizing species production, decay (i.e., average concentration, square of average concentration), and degree of mixing (i.e., variances of species concentration). Unsurprisingly, linear classifiers and regressors failed to reproduce the QoIs; however, ensemble methods (classifiers and regressors) and the MLP model accurately classified the state of reactive mixing and the QoIs. Among ensemble methods, random forest and decision-tree-based AdaBoost faithfully predicted the QoIs. At run time, trained ML emulators produced results times faster than the finite-element simulations. Due to their low computational expense and high accuracy, ensemble and MLP models are excellent emulators for these numerical simulations and great utilities in uncertainty quantification exercises, which can require 1,000s of forward model runs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Physics-Informed Machine Learning Models for Predicting the Progress of Reactive-Mixing

This paper presents a physics-informed machine learning (ML) framework to construct reduced-order models (ROMs) for reactive-transport quantities of interest (QoIs) based on high-fidelity numerical simu-lations. QoIs include species decay, product yield, and degree of mixing. The ROMs for QoIs are applied to quantify and understand how the chemical species evolve over time. First, high-resolution datasets for constructing ROMs are generated by solving anisotropic reaction-di?usion equations using a non-negative finite element formulation for di?erent input parameters. The reactive-mixing model input parameters are: time-scale associated with flipping of velocity, spatial-scale controlling small/large vortex structures of velocity, perturbation parameter of the vortex-based velocity, anisotropic dispersion strength/contrast, and molecular diffusion. Second, random forests, F-test, and mutual information criterion are used to evaluate the importance of model inputs/features with respect to QoIs. We observed that anisotropic dispersion strength/contrast is the most important feature and time-scale associated with flipping of velocity is the least important feature. Third, Support Vector Machines (SVM) and Support Vector Regression (SVR) are used to construct ROMs based on the model inputs. The constructed SVR-ROMs are then used to predict scaling of QoIs. We also present estimates and inequalities on the QoIs, which inform that the species decay, mix, and produce in an exponential fashion. These inequalities also inform that a radial basis function is the most suitable kernel for the SVM/SVR models for QoIs. It is observed that R2-score for SVR-ROMs on unseen data is greater than 0.9, implying that the SVR-ROMs are able to predict the reaction-diffusion system state reasonably well. Finally, in terms of the computational cost, the proposed SVM-ROMs are O(107) times faster than running a high-fidelity finite element simulation for evaluating QoIs. This makes the proposed ML-based ROMs attractive for reactive-transport sensing and real-time monitoring applications as they are significantly faster yet reasonably accurate.

Mudunuru, Maruti K.↗