Search NASA⌕ Search

SEARCH · Search NASA

Results for “array data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Virtual center arraying

Methods to increase the amount of data that can be received from outer planet missions are described with emphasis on antenna arraying systems designed to increase the total effective aperture of the receiving system. One such method is virtual center arraying (VCA). In VCA, a combined carrier reference is derived at a point that is, conceptually, the geometric center of the array. This point need not coincide with any of the actual antennas of the array. A noise analysis of the VCA system is given along with formulas for the phase jitter as a function of loop bandwidths and the amount of loop damping. If the ratio of the loop bandwidths of the center loop to the vertex loops is greater than 100, then the jitter is very nearly equal to that expected for ideal combined carrier referencing.

Deutsch, L. J.↗

An analytic performance model of disk arrays and its application

As disk arrays become widely used, tools for understanding and analyzing their performance become increasingly important. In particular, performance models can be invaluable in both configuring and designing disk arrays. Accurate analytic performance models are desirable over other types of models because they can be quickly evaluated, are applicable under a wide range of system and workload parameters, and can be manipulated by a range of mathematical techniques. Unfortunately, analytical performance models of disk arrays are difficult to formulate due to the presence of queuing and fork-join synchronization; a disk array request is broken up into independent disk requests which must all complete to satisfy the original request. We develop, validate, and apply an analytic performance model for disk arrays. We derive simple equations for approximating their utilization, response time, and throughput. We then validate the analytic model via simulation and investigate the accuracy of each approximation used in deriving the analytical model. Finally, we apply the analytical model to derive an equation for the optimal unit of data striping in disk arrays.

Lee, Edward K.↗

Summary of progress at the Poker Flat Observatory in Alaska

A description of the status of the Poker Flat MST Radar as of early 1983 is included in the 1983 mesosphere-stratosphere-troposphere MST Workshop Proceedings. The Observatory continues to operate in a continuous data-taking mode, except for a three-week planned campaign experiment concurrent with the STATE rocket program during June 1983. Construction of the digital preprocessing system mentioned in the last status report is all but complete. This additional improvement should be operational by late summer. The possibility of steering the array also mentioned in the last status report is being investigated. A project is underway to electronically steer the one-quarter vertical section of the array. Steering will be in finite steps within about + or - 5 deg of vertical. Successful testing of this modification may lead to eventually steering the entire array in this manner. Data analysis of the data base (now more than four years in length) continues with well over one dozen extramural scientific groups participating.

Balsley, B. B.↗

Metrology System for a Large, Somewhat Flexible Telescope

A proposed metrology system would be incorporated into a proposed telescope that would include focusing optics on a rigid bench connected via a deployable mast to another rigid bench holding a focal-plane array of photon counting photodetectors. Deformations of the deployable mast would give rise to optical misalignments that would alter the directions (and, hence, locations) of incidence of photons on the focal plane. The metrology system would measure the relative displacement of the focusing- optics bench and the focal-plane array bench. The measurement data would be used in post-processing of the digitized photodetector outputs to compensate for the mast-deformation-induced changes in the locations of incidence of photons on the focal plane, thereby making it possible to determine the original directions of incidence of photons with greater accuracy. The proposed metrology system is designed specifically for the Nuclear Spectroscopic Telescope Array (NuSTAR) a proposed spaceborne x-ray telescope. The basic principles of design and operation are also applicable to other large, somewhat flexible telescopes, both terrestrial and spaceborne. In the NuSTAR, the structural member connecting the optical bench and the photodetector array would be a 10-m-long deployable mast, and there is a requirement to keep errors in measured directions of incidence of photons below 10 arc seconds (3 sigma). The proposed system would include three diode lasers that would be mounted on the focusing-optics bench. For clarity, only one laser is shown in the figure, which is a greatly simplified schematic diagram of the system. Each laser would be aimed at a position-sensitive photodiode that would be mounted on the detector bench alongside the aforementioned telescope photodetector array. The diode lasers would operate at a wavelength of 830 nm, each at a power of 200 mW. Each laser beam would be focused to a spot of .1-mm diameter on the corresponding position-sensitive photodiode. To reduce the effect of sunlight on the measurements, a one-stage light baffle and an 830-nm transmission filter of 10-nm bandwidth would be placed in front of the position- sensitive photodiode. For each metrology reading, the output of the position-sensitive detector would be sampled and digitized twice: once with the lasers turned on, then once with the lasers turned off. The data from these two sets of samples would be subtracted from each other to further reduce the effects of sun glints or other background light sources.

Liebe, Carl Christian↗

International Space Station Solar Array Wing On-Orbit Electrical Performance Degradation Measured

The port-side photovoltaic power module (P6) was activated on the International Space Station in December 2000. P6 provides electrical power to channels 2B and 4B to operate ISS power loads. A P6 is shown in the preceding photograph. This article highlights the work done at the NASA Glenn Research Center to calculate the on-orbit degradation of the P6 solar array wings (SAWs) using on-orbit data from December 2000 to February 2003. During early ISS operations, the 82 strings of photovoltaic cells that make up a SAW can provide much more power than is necessary to meet the demand. To deal with excess power, a sequential shunt unit successively shunts the current from the strings. This shunt current was the parameter chosen for the SAW performance degradation study for the following reasons: (1) it is based on a direct shunt current measurement in the sequential shunt unit, (2) the shunt current has a low temperature dependence that reduces the data correction error from using a computationally derived array temperature, and (3) the SSU shunt current is essentially the same as the SAW short-circuit current on a per-string basis.

Gustafson, Eric D.↗

NASA Open Science Data Repository: Maximizing Spaceflight Bioscience Data

The next era in human space exploration is rapidly approaching and will require the use of countermeasures to deep space health hazards. The development of countermeasures (or, the re-purposing of existing agents) will be highly dependent on our understanding of basic biological responses to space stressors (e.g. ionizing radiation, altered gravitational fields, altered day-night cycles, confinement, isolation, hostile-closed environments, distance-duration from Earth, exposure to celestial regolith, etc.). The fast-growing array of space biological data, which in the past was simply archived after minimal analysis, holds great potential if it can be reorganized and formatted for data re-analysis and re-use via Open Science. Organizing the data for such analysis is a challenge because of its diverse nature (molecular, cellular, tissue, imaging, whole organism and behavior). To address the challenges posed by gaining new knowledge from a vast and diverse amount of biological, health and environmental data in space, the NASA Open Science Data Repository (OSDR - osdr.nasa.gov/bio) plays a crucial role in curating and openly publishing biological data from space-related experiments. Its design incorporates successes and lessons from NASA GeneLab, encompassing not only high-throughput sequencing data but also physiological, phenotypic, and telemetry data. The OSDR makes space biological data FAIR (findable, accessible, interoperable, reusable), and facilitates effective data ingestion, dissemination, and Open Science collaborations. The OSDR also has the capability to integrate human astronaut data with state-of-the-art security and accessibility procedures. We will discuss here several strategies that NASA’s Biological and Physical Science Division have put in place to maximize the return on investment for spaceflight bioscience data.

space biology↗

Open Science for Life in Space: Data Sharing and Tools for Knowledge Discovery

The next era in human space exploration is rapidly approaching and will require the use of countermeasures to deep space health hazards. The development of countermeasures (or, there-purposing of existing agents) will be highly dependent on our understanding of basic biological responses to space stressors (e.g. ionizing radiation, altered gravitational fields, altered day-night cycles, confinement, isolation, hostile-closed environments, distance-duration from Earth, exposure to celestial regolith, etc.). The fast-growing array of space biological data, which in the past was simply archived after minimal analysis, holds great potential if it can be reorganized and formatted for Open Science. Organizing the data for such analysis is a challenge because of its diverse nature (molecular, cellular, tissue, imaging, whole organism and behavior). We will discuss here several strategies that NASA's Biological and Physical Science Division has put in place to maximize the return on investment for spaceflight bioscience data. Open Science, as a scientific philosophy, is the concept that the more people who have access to the data, the more knowledge will be gained from it. This guiding principle led NASA to develop GeneLab in 2015. GeneLab houses spaceflight and relevant ground-based multi-omics data, and has grown to ~400 transcriptomatic, proteomic, metabolomic and epigenomic datasets from plant, rodent, small animal, and microbial space experiments. GeneLab provides users with various tools for data analysis and a visualization portal that allows users to interact with gene expression data from space-related 'omics experiments. Open Science is also about building scientific communities, and with this spirit in mind, GeneLab has spawned several Analysis Working Groups (AWGs), comprised of more than 200 volunteer scientists. The AWGs initially provided feedback on the processing pipeline and metadata 'omics standards for GeneLab. Over the last few years, they have become a community-driven science enterprise, engaging in large meta-analysis of GeneLab datasets, resulting in 10 publications (beyond the originally submitted research). Overall, the Open Science nature of GeneLab has resulted in a high degree of data-use, resulting in 40 enabled publications by open data. The enormous success and knowledge gained from GeneLab has led to a collection of sister NASA "Open Science Data Repositories (OSDR)" and research support groups. These include the NASA Ames Life Sciences Data Archive (ALSDA), the NASA Biological Institutional Scientific Collection (NBISC), and the Biospecimen Sharing Program (BSP). All are adopting the GeneLab data architecture system to maximize open-access, find-ability, accessibility, interoperability, and reusability (FAIR). ALSDA collects and curates phenotypic-physiological bioimaging-behavioral data from space and space-relevant non-human experiments, oftentimes coming from the same omics-associated experimental datasets found in GeneLab. Since 2021, a community of ~100 researchers have rallied around ALSDA, to provide feedback in a new ALSDA AWG focused on phenotypic-physiological investigation-sample-assay metadata standards (e.g., Micro-Computed Tomography, Light/Flourescence Microscopy, Western Blot, Flow Cytometry, Novel Object Recognition, Elevated Plus Maze, etc. of ~50 assays collected). These standards are part of a new single point-of-entry data submission portal for all non-human Space Biology and Human Research Program principal investigators, to submit, curate, and share their research data. With open-access space biological data now collected and curated together with rich metadata, and with the potential for linkage to "big data" from the international biological and medical communities (NIH, EBI, etc.), the artificial intelligence and machine learning (AI/ML) era has started for Space Biology.

omics↗

Remote Observing with the Keck Telescope Using the ACTS Satellite

As a technical demonstration project for the NASA Advanced Communications Technology Satellite (ACTS), we have implemented remote observing on the 10-meter Keck II telescope on Mauna Kea in Hawaii from the California Institute of Technology campus in Pasadena. The data connection consists of optical fiber networks in Hawaii and California, connecting the end-points to high data rate (HDR) ACTS satellite antennae at JPL in Pasadena and at the Tripler Army Medical Center in Honolulu. The terrestrial fiber networks run the asynchronous transfer mode (ATM) protocol at DS-3 (45 Mbit/sec) speeds, providing ample bandwidth to enable remote observing with a software environment identical to that used for on-site observing in Hawaii. This experiment has explored the data requirements of remote observing with a modern research telescope and large-format detector arrays. While the maximum burst data rates are lower than those required for many other applications (e.g., HDTV), the network reliability and data integrity requirements are critical. As we show in this report, the former issue particularly may be the greatest challenge for satellite networks for this class of application. We have also experimented with the portability of standard TCP/IP applications to satellite networks, demonstrating the need for alternative TCP congestion algorithms and minimization of bit error rates (BER). Reliability issues aside, we have demonstrated that true remote observing over high-speed networks provides several important advantages over standard observing paradigms. Technical advantages of the high-speed network access include more rapid download of data to a user's home institution and the opportunity for alternative communication facilities between members of an observing team, such as audio- and videoconferencing.

SATELLITE COMMUNICATIONS↗

Open Science for Life in Space: Data Sharing and Tools for Knowledge Discovery

The next era in human space exploration is rapidly approaching and will require the use of countermeasures to deep space health hazards. The development of countermeasures (or, the re-purposing of existing agents) will be highly dependent on our understanding of basic biological responses to space stressors (e.g. ionizing radiation, altered gravitational fields, altered day-night cycles, confinement, isolation, hostile-closed environments, distance-duration from Earth, exposure to celestial regolith, etc.). The fast-growing array of space biological data, which in the past was simply archived after minimal analysis, holds great potential if it can be reorganized and formatted for Open Science. Organizing the data for such analysis is a challenge because of its diverse nature (molecular, cellular, tissue, imaging, whole organism and behavior). We will discuss here several strategies that NASA’s Biological and Physical Science Division has put in place to maximize the return on investment for spaceflight bioscience data. Open Science, as a scientific philosophy, is the concept that the more people who have access to the data, the more knowledge will be gained from it. This guiding principle led NASA to develop GeneLab in 2015. GeneLab houses spaceflight and relevant ground-based multi-omics data, and has grown to ~400 transcriptomic, proteomic, metabolomic and epigenomic datasets from plant, rodent, small animal, and microbial space experiments. GeneLab provides users with various tools for data analysis and a visualization portal that allows users to interact with gene expression data from space-related ‘omics experiments. Open Science is also about building scientific communities, and with this spirit in mind, GeneLab has spawned several Analysis Working Groups (AWGs), comprised of more than 200 volunteer scientists. The AWGs initially provided feedback on the processing pipeline and metadata ‘omics standards for GeneLab. Over the last few years, they have become a community-driven science enterprise, engaging in large meta-analysis of GeneLab datasets, resulting in 10 publications (beyond the originally submitted research). Overall, the Open Science nature of GeneLab has resulted in a high degree of data re-use, resulting in 38 additional publications derived from the original 67 publication over the past four years. The enormous success and knowledge gained from GeneLab has led to a collection of sister NASA “Open Science Data Repositories (OSDR)” and research support groups. These include the NASA Ames Life Sciences Data Archive (ALSDA), the NASA Biological Institutional Scientific Collection (NBISC), and the Biospecimen Sharing Program (BSP). All are adopting the GeneLab data architecture system to maximize open-access, find-ability, accessibility, interoperability, and reusability (FAIR). ALSDA collects and curates phenotypic-physiological bioimaging-behavioral data from space and space-relevant non-human experiments, oftentimes coming from the same omics-associated experimental datasets found in GeneLab. Since 2021, a community of ~100 researchers have rallied around ALSDA, to provide feedback in a new ALSDA AWG focused on phenotypic-physiological investigation-sample-assay metadata standards (e.g., Micro-Computed Tomography, Light/Fluorescence Microscopy, Western Blot, Flow Cytometry, Novel Object Recognition, Elevated Plus Maze, etc. of ~50 assays collected). These standards are part of a new single point-of-entry data submission portal for all non-human Space Biology and Human Research Program principal investigators, to submit, curate, and share their research data. With open-access space biological data now collected and curated together with rich metadata, and with the potential for linkage to “big data” from the international biological and medical communities (NIH, EBI, etc.), the artificial intelligence and machine learning (AI/ML) era has started for Space Biology. Several other talks will cover these topics in this conference.

life sciences↗

GEOS-2 refraction program summary document

Data from an extensive array of collocated instrumentation at the Wallops Island test facility were intercompared in order to (1) determine the practical achievable accuracy limitations of various tropospheric and ionospheric correction techniques; (2) examine the theoretical bases and derivation of improved refraction correction techniques; and (3) estimate internal systematic and random error levels of the various tracking stations. The GEOS 2 satellite was used as the target vehicle. Data were obtained regarding the ionospheric and tropospheric propagation errors, the theoretical and data analysis of which was documented in some 30 separate reports over the last 6 years. An overview of project results is presented.

Mallinckrodt, A. J.↗

An Efficient Image Recovery Algorithm for Diffraction Tomography Systems

A diffraction tomography system has potential application in ultrasonic medical imaging area. It is capable of achieving imagery with the ultimate resolution of one quarter the wavelength by collecting ultrasonic backscattering data from a circular array of sensors and reconstructing the object reflectivity using a digital image recovery algorithm performed by a computer. One advantage of such a system is that is allows a relatively lower frequency wave to penetrate more deeply into the object and still achieve imagery with a reasonable resolution. An efficient image recovery algorithm for the diffraction tomography system was originally developed for processing a wide beam spaceborne SAR data...

Jin, Michael Y.↗

Engineering and Scientific Applications: Using MatLab(Registered Trademark) for Data Processing and Visualization

MatLab(TradeMark)(MATrix LABoratory) is a numerical computation and simulation tool that is used by thousands Scientists and Engineers in many countries. MatLab does purely numerical calculations, which can be used as a glorified calculator or interpreter programming language; its real strength is in matrix manipulations. Computer algebra functionalities are achieved within the MatLab environment using "symbolic" toolbox. This feature is similar to computer algebra programs, provided by Maple or Mathematica to calculate with mathematical equations using symbolic operations. MatLab in its interpreter programming language form (command interface) is similar with well known programming languages such as C/C++, support data structures and cell arrays to define classes in object oriented programming. As such, MatLab is equipped with most of the essential constructs of a higher programming language. MatLab is packaged with an editor and debugging functionality useful to perform analysis of large MatLab programs and find errors. We believe there are many ways to approach real-world problems; prescribed methods to ensure foregoing solutions are incorporated in design and analysis of data processing and visualization can benefit engineers and scientist in gaining wider insight in actual implementation of their perspective experiments. This presentation will focus on data processing and visualizations aspects of engineering and scientific applications. Specifically, it will discuss methods and techniques to perform intermediate-level data processing covering engineering and scientific problems. MatLab programming techniques including reading various data files formats to produce customized publication-quality graphics, importing engineering and/or scientific data, organizing data in tabular format, exporting data to be used by other software programs such as Microsoft Excel, data presentation and visualization will be discussed.

Sen, Syamal K.↗

AAH Cage Out-Link and In-Link Antenna Characterization

This final report encapsulates the accomplishments of the third year of work on an Advanced Biotelemetry System (ABTS). Overall MU/ABTS project objectives are to provide a biotelemetry system that can collect data from and send commands to an implanted biotransceiver. This system will provide for studies of rodent development in space. The system must be capable of operating in a metal animal cage environment. An important goal is the development of a small, "smart", micropower, -channel data output and single channel command implantable biotransceiver with eight input capabilities with the flexibility for easy customization for a variety of physiologic investigations. The NASA Ames/Marquette University Joint Research work has been devoted to the system design of such a new state of the art biotelemetry system, having multiple physiologic inputs, and bi-directional data transfer capabilities. This work has provided a successful prototype system that connects, by two-way radio links, an addressable biotelemetry system that provides communication between an animal biotelemeter prototype and a personal computer. The operational features of the prototype system are listed below: Two-Way PCM Communication with Implanted Biotelemeter Microcontroller Based Biotelemeter Out-Link: Wideband FSK (60 kbaud) In-Link: OOK (2.4 kbaud) Septum Antenna Arrays (In/Out-Links) Personal Computer Data Interface The important requirement of this third year's work, to demonstrate two-way communication with transmit and receive antennas inside the metal animal cage, has been successfully accomplished. The advances discussed in this report demonstrate that the AAH cage antenna system can provide Out-link and In-link capability for the ABTS bi-directional telemetry system, and can serve as a benchmark for project status.

Jeutter, Dean C.↗

Engineering and Scientific Applications: Using MatLab(Registered Trademark) for Data Processing and Visualization

MatLab(R) (MATrix LABoratory) is a numerical computation and simulation tool that is used by thousands Scientists and Engineers in many cou ntries. MatLab does purely numerical calculations, which can be used as a glorified calculator or interpreter programming language; its re al strength is in matrix manipulations. Computer algebra functionalities are achieved within the MatLab environment using "symbolic" toolbo x. This feature is similar to computer algebra programs, provided by Maple or Mathematica to calculate with mathematical equations using s ymbolic operations. MatLab in its interpreter programming language fo rm (command interface) is similar with well known programming languag es such as C/C++, support data structures and cell arrays to define c lasses in object oriented programming. As such, MatLab is equipped with most ofthe essential constructs of a higher programming language. M atLab is packaged with an editor and debugging functionality useful t o perform analysis of large MatLab programs and find errors. We belie ve there are many ways to approach real-world problems; prescribed methods to ensure foregoing solutions are incorporated in design and ana lysis of data processing and visualization can benefit engineers and scientist in gaining wider insight in actual implementation of their perspective experiments. This presentation will focus on data processing and visualizations aspects of engineering and scientific applicati ons. Specifically, it will discuss methods and techniques to perform intermediate-level data processing covering engineering and scientifi c problems. MatLab programming techniques including reading various data files formats to produce customized publication-quality graphics, importing engineering and/or scientific data, organizing data in tabu lar format, exporting data to be used by other software programs such as Microsoft Excel, data presentation and visualization will be discussed. The presentation will emphasize creating practIcal scripts (pro grams) that extend the basic features of MatLab TOPICS mclude (1) Ma trix and vector analysis and manipulations (2) Mathematical functions (3) Symbolic calculations & functions (4) Import/export data files (5) Program lOgic and flow control (6) Writing function and passing parameters (7) Test application programs

Sen, Syamal K.↗

STS-74/Mir Photogrammetric Appendage Structural Dynamics Experiment Preliminary Data Analysis

The Photogrammetric Appendage Structural Dynamics Experiment was designed, developed, and flown to demonstrate and prove measurement of the structural vibration response of a Russian Space Station Mir solar array using photogrammetric methods. The experiment flew on the STS-74 Space Shuttle mission to Mir in November 1995 and obtained video imagery of solar array structural response to various excitation events. The video imagery has been digitized and triangulated to obtain response time history data at discrete points on the solar array. This data has been further processed using the Eigensystem Realization Algorithm modal identification technique to determine the natural vibration frequencies, damping, and mode shapes of the solar array. The results demonstrate that photogrammetric measurement of articulating, non-optically targeted, flexible solar arrays and appendages is a viable, low-cost measurement option for the International Space Station.

Gilbert, Michael G.↗

STS-74/MIR Photogrammetric Appendage Structural Dynamics Experiment Preliminary Data Analysis

The Photogrammetric Appendage Structural Dynamics Experiment was designed, developed, and flown to demonstrate and prove measurement of the structural vibration response of a Russian Space Station Mir solar array using photogrammetric methods. The experiment flew on the STS-74 Space Shuttle mission to Mir in November 1995 and obtained video imagery of solar array structural response to various excitation events. The video imagery has been digitized and triangulated to obtain response time history data at discrete points on the solar array. This data has been further processed using the Eigensystem Realization Algorithm modal identification technique to determine the natural vibration frequencies, damping, and mode shapes of the solar array. The results demonstrate that photogrammetric measurement of articulating, nonoptically targeted, flexible solar arrays and appendages is a viable, low-cost measurement option for the International Space Station.

Gilbert, Michael G.↗

Submillisecond measurements of system optical modulation functions in mosaic focal plane arrays

Measurements of system optical modulation functions (MTF, SWR) may be distorted by time-dependent environmental effects (thermal, vibration, flexure) and by electronics drift. Fast data collection may therefore be advantageous by minimizing drift time. The problem of fast data collection is accentuated when modulation data must be taken on a large number of detectors in a focal plane array. A method has been developed for the generation and storage of knife edge data from focal plane arrays, where data collection time per detector is in the submillisecond range. Once knife edge collects are completed, MTF response is found using conventional convolution techniques. SWR is obtained directly from knife edge response using a computerized simulation algorithm which bypasses use of MTF harmonics. Requirements for detector electronics speed, damping, and dynamic range are considered.

Thurlow, P. E.↗