Search NASA⌕ Search

SEARCH · Search NASA

Results for “benchmark problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Acceleration of the IMplicit–EXplicit nonhydrostatic unified model of the atmosphere on manycore processors

We present the acceleration of an IMplicit-EXplicit (IMEX) nonhydrostatic atmospheric model on manycore processors such as graphic processing units (GPUs) and Intel's Many Integrated Core (MIC) architecture. IMEX time integration methods sidestep the constraint imposed by the Courant-Friedrichs-Lewy condition on explicit methods through corrective implicit solves within each time step. In this work, we implement and evaluate the performance of IMEX on manycore processors relative to explicit methods. Using 3D-IMEX at Courant number C = 15, we obtained a speedup of about 4x relative to an explicit time stepping method run with the maximum allowable C = 1. Moreover, the unconditional stability of IMEX with respect to the fast waves means the speedup can increase significantly with the Courant number as long as the accuracy of the resulting solution is acceptable. We show a speedup of 100x at C = 150 using 1D-IMEX to demonstrate this point. Several improvements on the IMEX procedure were necessary in order to outperform our results with explicit methods: (a) reducing the number of degrees of freedom of the IMEX formulation by forming the Schur complement, (b) formulating a horizontally explicit vertically implicit 1D-IMEX scheme that has a lower workload and better scalability than 3D-IMEX, (c) using high-order polynomial preconditioners to reduce the condition number of the resulting system, and (d) using a direct solver for the 1D-IMEX method by performing and storing LU factorizations once to obtain a constant cost for any Courant number. Without all of these improvements, explicit time integration methods turned out to be difficult to beat. We discuss in detail the IMEX infrastructure required for formulating and implementing efficient methods on manycore processors. Several parametric studies are conducted to demonstrate the gain from each of the abovementioned improvements. Lastly, we validate our results with standard benchmark problems in numerical weather prediction and evaluate the performance and scalability of the IMEX method using up to 4192 GPUs and 16 Knights Landing processors.

97 MATHEMATICS AND COMPUTING↗

Coarse Mesh Finite Difference Acceleration for Pebble Tracking Transport in Griffin

We implemented a coarse mesh finite difference (CMFD) for accelerating transport calculations with PTT (pebble tracking transport) in the Griffin code. More specifically, extensions for transport update with the consideration of scattering operator and CMFD projection were implemented for PTT. The implementation was verified with a simplified PBR (pebble bed reactor) benchmark problem and significant performance improvements in CPU time was observed.

97 MATHEMATICS AND COMPUTING↗

Manifold Learning-Based Polynomial Chaos Expansions for High-Dimensional Surrogate Models

In this work we introduce a manifold learning-based method for uncertainty quantification (UQ) in systems describing complex spatiotemporal processes. Our first objective is to identify the embedding of a set of high-dimensional data representing quantities of interest of the computational or analytical model. For this purpose, we employ Grassmannian diffusion maps, a two-step nonlinear dimension reduction technique which allows us to reduce the dimensionality of the data and identify meaningful geometric descriptions in a parsimonious and inexpensive manner. Polynomial chaos expansion is then used to construct a mapping between the stochastic input parameters and the diffusion coordinates of the reduced space. An adaptive clustering technique is proposed to identify an optimal number of clusters of points in the latent space. The similarity of points allows us to construct a number of geometric harmonic emulators which are finally utilized as a set of inexpensive pretrained models to perform an inverse map of realizations of latent features to the ambient space and thus perform accurate out-of-sample predictions. Thus, the proposed method acts as an encoder-decoder system which is able to automatically handle very high-dimensional data while simultaneously operating successfully in the small-data regime. The method is demonstrated on two benchmark problems and on a system of advection-diffusion-reaction equations which model a first-order chemical reaction between two species. In all test cases, the proposed method is able to achieve highly accurate approximations which ultimately lead to the significant acceleration of UQ tasks.

42 ENGINEERING↗

Incorporating Full Elastodynamic Effects and Dipping Fault Geometries in Community Code Verification Exercises for Simulations of Earthquake Sequences and Aseismic Slip (SEAS)

ABSTRACT Numerical modeling of earthquake dynamics and derived insight for seismic hazard relies on credible, reproducible model results. The sequences of earthquakes and aseismic slip (SEAS) initiative has set out to facilitate community code comparisons, and verify and advance the next generation of physics-based earthquake models that reproduce all phases of the seismic cycle. With the goal of advancing SEAS models to robustly incorporate physical and geometrical complexities, here we present code comparison results from two new benchmark problems: BP1-FD considers full elastodynamic effects, and BP3-QD considers dipping fault geometries. Seven and eight modeling groups participated in BP1-FD and BP3-QD, respectively, allowing us to explore these physical ingredients across multiple codes and better understand associated numerical considerations. With new comparison metrics, we find that numerical resolution and computational domain size are critical parameters to obtain matching results. Codes for BP1-FD implement different criteria for switching between quasi-static and dynamic solvers, which require tuning to obtain matching results. In BP3-QD, proper remote boundary conditions consistent with specified rigid body translation are required to obtain matching surface displacements. With these numerical and mathematical issues resolved, we obtain excellent quantitative agreements among codes in earthquake interevent times, event moments, and coseismic slip, with reasonable agreements made in peak slip rates and rupture arrival time. We find that including full inertial effects generates events with larger slip rates and rupture speeds compared to the quasi-dynamic counterpart. For BP3-QD, both dip angle and sense of motion (thrust versus normal faulting) alter ground motion on the hanging and foot walls, and influence event patterns, with some sequences exhibiting similar-size characteristic earthquakes, and others exhibiting different-size events. These findings underscore the importance of considering full elastodynamics and nonvertical dip angles in SEAS models, as both influence short- and long-term earthquake behavior and are relevant to seismic hazard.

Geochemistry & Geophysics↗

A simulation infrastructure for examining the performance of resilience strategies at scale

Fault-tolerance is a major challenge for many current and future extreme-scale systems, with many studies showing it to be the key limiter to application scalability. While there are a number of studies investigating the performance of various resilience mechanisms, these are typically limited to scales orders of magnitude smaller than expected for next-generation systems and simple benchmark problems. In this paper we show how, with very minor changes, a previously published and validated simulation framework for investigating application performance of OS noise can be used to simulate the overheads of various resilience mechanisms at scale. Using this framework, we compare the failure-free performance of this simulator against an analytic model to validate its performance and demonstrate its ability to simulate the performance of two popular rollback recovery methods on traces from real.

Ferreira, Kurt Brian↗

3D J-Integral Capability in Grizzly

This report summarizes work done to develop a capability to evaluate fracture contour J-Integrals in 3D in the Grizzly code. In the current fiscal year, a previously-developed 2D implementation of a J-Integral evaluation capability has been extended to work in 3D, and to include terms due both to mechanically-induced strains and due to gradients in thermal strains. This capability has been verified against a benchmark solution on a model of a curved crack front in 3D. The thermal term in this integral has been verified against a benchmark problem with a thermal gradient. These developments are part of a larger effort to develop Grizzly as a tool that can be used to predict the evolution of aging processes in nuclear power plant systems, structures, and components, and assess their capacity after being subjected to those aging processes. The capabilities described here have been developed to enable evaluations of Mode- stress intensity factors on axis-aligned flaws in reactor pressure vessels. These can be compared with the fracture toughness of the material to determine whether a pre-existing flaw would begin to propagate during a pos- tulated pressurized thermal shock accident. This report includes a demonstration calculation to show how Grizzly is used to perform a deterministic assessment of such a flaw propagation in a degraded reactor pressure vessel under pressurized thermal shock conditions. The stress intensity is calculated from J, and the toughness is computed using the fracture master curve and the degraded ductile to brittle transition temperature.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Results for Phase I of the IAEA Coordinated Research Program on HTGR Uncertainties

The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied. High Temperature Gas-cooled Reactors (HTGR) has its own peculiarities, coated particle design, large graphite quantities, different materials and high temperatures that also require other simulation requirements. The IAEA has therefore launched a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modeling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the HTR-PM (INET, China). This report summarizes the contributions of the HTGR Methods Simulation group at Idaho National Laboratory (INL) up to this point of the CRP. The activities at INL have been focused so far on creating the problem specifications for the prismatic design, as well as providing reference solutions for the exercises defined for Phase I. An overview is provided of the HTGR UAM objectives and scope, and the detailed specifications for Exercises I-1, I-2, I-3 and I-4 are also included here for completeness. The main focus of the report is the compilation and discussion of reference results for Phase I (i.e. for input parameters at their nominal or best-estimate values), which is defined as the first step of the uncertainty quantification process. These reference results can be used by other CRP participants for comparison with other codes or their own reference results. The status on the Monte Carlo modeling of the experimental VHTRC facility is also discussed. Reference results were obtained for the neutronics stand-alone cases (Ex. I-1 and Ex. I-2) using the (relatively new) Monte Carlo code Serpent, and comparisons were performed with the more established Monte Carlo codes MCNP and KENO-VI. For the thermal-fluids stand-alone cases (Ex. I-3 and I-4) the commercial CFD code CFX was utilized to obtain reference results that can be compared with lower fidelity tools.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Classifier-Guided Sampling for Complex Energy System Optimization

This report documents the results of a Laboratory Directed Research and Development (LDRD) effort entitled “Classifier-Guided Sampling for Complex Energy System Optimization” that was conducted during FY 2014 and FY 2015. The goal of this project was to develop, implement, and test major improvements to the classifier-guided sampling (CGS) algorithm. CGS is type of evolutionary algorithm for performing search and optimization over a set of discrete design variables in the face of one or more objective functions. Existing evolutionary algorithms, such as genetic algorithms, may require a large number of objective function evaluations to identify optimal or near-optimal solutions. Reducing the number of evaluations can result in significant time savings, especially if the objective function is computationally expensive. CGS reduces the evaluation count by using a Bayesian network classifier to filter out non-promising candidate designs, prior to evaluation, based on their posterior probabilities. In this project, both the single-objective and multi-objective versions of the CGS are developed and tested on a set of benchmark problems. As a domain-specific case study, CGS is used to design a microgrid for use in islanded mode during an extended bulk power grid outage.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Automatic Energy Schemes for High Performance Applications

Although high-performance computing traditionally focuses on the efficient execution of large-scale applications, both energy and power have become critical concerns when approaching exascale. Drastic increases in the power consumption of supercomputers affect significantly their operating costs and failure rates. In modern microprocessor architectures, equipped with dynamic voltage and frequency scaling (DVFS) and CPU clock modulation (throttling), the power consumption may be controlled in software. Additionally, network interconnect, such as Infiniband, may be exploited to maximize energy savings while the application performance loss and frequency switching overheads must be carefully balanced. This work first studies two important collective communication operations, all-to-all and allgather and proposes energy saving strategies on the per-call basis. Next, it targets point-to-point communications to group them into phases and apply frequency scaling to them to save energy by exploiting the architectural and communication stalls. Finally, it proposes an automatic runtime system which combines both collective and point-to-point communications into phases, and applies throttling to them apart from DVFS to maximize energy savings. The experimental results are presented for NAS parallel benchmark problems as well as for the realistic parallel electronic structure calculations performed by the widely used quantum chemistry package GAMESS. Close to the maximum energy savings were obtained with a substantially low performance loss on the given platform.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Excore Modeling with VERAShift

It is important to be able to accurately predict the neutron flux outside the immediate reactor core for a variety of safety and material analyses. Monte Carlo radiation transport calculations are required to produce the high fidelity excore responses. Under this milestone VERA (specifically the VERAShift package) has been extended to perform excore calculations by running radiation transport calculations with Shift. This package couples VERA-CS with Shift to perform excore tallies for multiple state points concurrently, with each component capable of parallel execution on independent domains. Specifically, this package performs fluence calculations in the core barrel and vessel, or, performs the requested tallies in any user-defined excore regions. VERAShift takes advantage of the general geometry package in Shift. This gives VERAShift the flexibility to explicitly model features outside the core barrel, including detailed vessel models, detectors, and power plant details. A very limited set of experimental and numerical benchmarks is available for excore simulation comparison. The Consortium for the Advanced Simulation of Light Water Reactors (CASL) has developed a set of excore benchmark problems to include as part of the VERA-CS verification and validation (V&V) problems. The excore capability in VERAShift has been tested on small representative assembly problems, multiassembly problems, and quarter-core problems. VERAView has also been extended to visualize these vessel fluence results from VERAShift. Preliminary vessel fluence results for quarter-core multistate calculations look very promising. Further development is needed to determine the details relevant to excore simulations. Validation of VERA for fluence and excore detectors still needs to be performed against experimental and numerical results.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

On the Preconditioning of a Newton-Krylov Solver for a High-Order reconstructed Discontinuous Galerkin Discretization of All-Speed Compressible Flow with Phase Change for Application in Laser-Based Additive Manufacturing

This dissertation focuses on the development of a fully-implicit, high-order compressible ow solver with phase change. The work is motivated by laser-induced phase change applications, particularly by the need to develop large-scale multi-physics simulations of the selective laser melting (SLM) process in metal additive manufacturing (3D printing). Simulations of the SLM process require precise tracking of multi-material solid-liquid-gas interfaces, due to laser-induced melting/ solidi cation and evaporation/condensation of metal powder in an ambient gas. These rapid density variations and phase change processes tightly couple the governing equations, requiring a fully compressible framework to robustly capture the rapid density variations of the ambient gas and the melting/evaporation of the metal powder. For non-isothermal phase change, the velocity is gradually suppressed through the mushy region by a variable viscosity and Darcy source term model. The governing equations are discretized up to 4th-order accuracy with our reconstructed Discontinuous Galerkin spatial discretization scheme and up to 5th-order accuracy with L-stable fully implicit time discretization schemes (BDF2 and ESDIRK3-5). The resulting set of non-linear equations is solved using a robust Newton-Krylov method, with the Jacobian-free version of the GMRES solver for linear iterations. Due to the sti nes associated with the acoustic waves and thermal and viscous/material strength e ects, preconditioning the GMRES solver is essential. A robust and scalable approximate block factorization preconditioner was developed, which utilizes the velocity-pressure (vP) and velocity-temperature (vT) Schur complement systems. This multigrid block reduction preconditioning technique converges for high CFL/Fourier numbers and exhibits excellent parallel and algorithmic scalability on classic benchmark problems in uid dynamics (lid-driven cavity ow and natural convection heat transfer) as well as for laser-induced phase change problems in 2D and 3D.

42 ENGINEERING↗

Level set methods for detonation shock dynamics using high-order finite elements

Level set methods are a popular approach to modeling evolving interfaces. We present a level set ad- vection solver in two and three dimensions using the discontinuous Galerkin method with high-order nite elements. During evolution, the level set function is reinitialized to a signed distance function to maintain ac- curacy. Our approach leads to stable front propagation and convergence on high-order, curved, unstructured meshes. The ability of the solver to implicitly track moving fronts lends itself to a number of applications; in particular, we highlight applications to high-explosive (HE) burn and detonation shock dynamics (DSD). We provide results for two- and three-dimensional benchmark problems as well as applications to DSD.

finite element methods↗

Simulated Half-Precision Implementation of Blocked QR Factorization and Graph Clustering Applications

We explored half-precision implementation of blocked QR algorithms with the following motivations: 1. New GPUs perform fast half-precision arithmetic (4 to 16 times as fast as doubleprecision). 2. QR factorization is a basic linear algebra tool useful for many physics and data analysis applications. 3. Communication-avoiding, parallelizable QR algorithms already exist for talland- skinny matrices. While the standard QR algorithms are highly unstable in half-precision, our numerical simulations show that the Tall-and-Skinny QR (TSQR) algorithm can improve the backward error of QR factorization. When using subspace iteration for graph clustering applications, half-precision accuracy in forming the eigenspace is sufficient for clustering with high precision and recall for some medium-scale benchmark problems. Note that all half-precision arithmetic were simulated with conversions to single-precision floats. Therefore, the results from this work are somewhat optimistic.

97 MATHEMATICS AND COMPUTING↗

AGR-1 Depletion Benchmark

The AGR-1 TRISO particle irradiation test was the first Advanced Gas Reactor test irradiated in the Advanced Test Reactor (ATR) at the Idaho National Laboratory. The TRISO particle fuel was 350 μm diameter uranium oxy-carbide (UCO) kernels enriched to 19.75 wt% U-235. The particles were embedded in cylindrical graphite compacts, placed in test capsules, and irradiated over a period of three years or 13 ATR power cycles. The fuel compacts achieved burnups approaching 20% FIMA and accumulated fast fluence up to 4.25E+25 n/m 2 (E n >0.18 MeV). This report describes the AGR-1 test train, capsules, compacts, and TRISO particle fuel in sufficient detail for a physics analyst to model the AGR-1 experiment as part of a larger ATR neutron transport model and perform a depletion calculation. The intent of the data herein is to define a practical numerical TRISO particle depletion benchmark problem for the AGR 1 irradiation test.

42 ENGINEERING↗

Lattice Element Error Solver for Modeling of Accelerators, Storage Ring, Transport Systems, and Insertion Devices

The goals of CRADA 350 were achieved in this Phase I SBIR work. Specifically, a software environment was developed which included a nonlinear solver, OASIS. During the Phase I work, we applied the algorithm to a number of nonlinear-solver benchmark problems, including SLAC accelerator problems. By searching over only two optimization-control parameters, this Phase I work has enabled the development of a systematic procedure to facilitate the finding of a “best-guessed” global minimum solution for various types of non-linear problems with different size and complexity. This set of rules was codified and led to a versatile nonlinear program, IMIGO.

43 PARTICLE ACCELERATORS↗

User Manual for MC2-3 Gamma Library Generation

This document presents a detailed description of generating the gamma library for MC 2 -3 which includes delayed gammas and betas based on the 94 gamma energy groups. The updated methodologies associated with heating and gamma calculations are introduced, which account for the self-shielding effect on KERMA factors and perform the gamma transport calculations to condense the gamma data from 94 to 21 groups. For these updates, the PreGAMMA code was developed to prepare NJOY inputs and generate delayed gammas and betas, and the GenGAMMA code was updated to process the outputs of PreGAMMA and NJOY. This document briefly discusses verification results of the new gamma library using the ABTR fuel pin and the EBR-II benchmark problem.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Am-241 Nuclear Safety and Environmental Interactions

NASA’s supply of radioisotopes for Radioisotope Heat Units (RHU) and Radioisotope Thermoelectric Generator (RTG) power sources is facing a crisis due to shortages of Pu-238 for future missions. Am-241 is a possible replacement for Pu-238 since its stockpile from the nuclear weapons program has remained relatively intact. The purpose of this project was to assess the safety of Am-241 and the risks associated with it as compared with PU-238. The project has resulted in a journal article, F. De-La-Torre-Aguilar, N. White, M. Prelas, R. V. Tompson, and S. K. Loyalka "Space nuclear power system accidents: Doses from Pu-238 and Am- 241 inhalation," Progress in Nuclear Energy vol.100C (2017), pp.171-182, which showed that the radiation dosage resulting from Am-241 inhalation are about 1/2.5 of the dosage resulting from Pu-238 inhalation per KW of Pu-238 power. Considerable progress was also made on the Direct Simulation Monte Carlo Method (DSMC) for simulation of aerosol evolution during accidents resulting in three publications: 1.I. Saldivar, F. De-La-Torre-Aguilar, M. Boraas, and S. K. Loyalka “Benchmark problems in aerosol evolution: Comparison of some exact and DSMC results” in Annals of Nuclear Energy vol.117 (2018), pp.213-222. 2. I. Saldivar and S. K. Loyalka, “Evolution of Aerosols Coupled to Environments: Verification of Direct Simulation Monte Carlo (DSMC)”, Nuclear Technology 204 (2018), pp.172-183. 3. M. Boraas and S. K. Loyalka, “Mesh Free Simulation of Spatially Inhomogeneous aerosols in Arbitrary Geometries” Nuclear Science and Engineering (2018). Further, we have computations on Am-241/Pu-238 vapor and aerosol interactions, and found that the vapor condensation rate is relatively insensitive to the mass effects, confirming some previous results. We have also completed computations of charge effects on evolution of different species aerosols and a manuscript is in preparation. Additionally, we have compared atmospheric dispersion and deposition of Pu-238 and Am-241 using the HYSPLIT code. We have also used a real lung model and the CFD program FLUENT to compute PuO2 and AmO2 deposition to explore improvements upon the ICPR-66 model. We have found that the deposition efficiencies of PuO2 and AmO2 are similar. These results (four manuscripts) will be submitted for publication in the post project period. We have made progress using framework of Mars 2020 mission nuclear risk assessment model to integrate all results, but our progress has been limited as the improved consequence modeling itself has been quite involved and challenging. We will integrate and complete the more extensive risk modeling computations and publish the results in the post-project period. In addition to the above, the project has resulted in research training of four PhD students

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Performance, Efficiency, and Effectiveness of Supercomputers

Our primary purpose here is to offer to the general technical and policy audience a perspective on whether the supercomputing community should focus on improving the efficiency of supercomputing systems and their use rather than on building larger and ostensibly more capable systems that are used at low efficiency. After first summarizing our content and defining some necessary terms, we give a concise answer to this question. We then set this in context by characterizing performance of current supercomputing systems on a variety of benchmark problems and actual problems drawn from workloads in the national security, industrial, and scientific context. We also answer some related questions, identify some important technological trends, and offer a perspective on the significance of these trends. We hope by doing so to better equip the reader to evaluate commentary and controversy concerning supercomputing performance.

97 MATHEMATICS AND COMPUTING↗