Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Revisiting the initial irreversible capacity loss of LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode material batteries

Layered LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) attracts widespread attention primarily due to its potential for high energy density and moderate thermal stability. However, the low initial coulombic efficiency (ICE) of the material limits the maximum utilization of their capacity. The capacity loss in the first cycle occurs under 4.0V and keep almost constant are considered as common characteristics for NCM-based materials. A clear cognition on the initial capacity loss may light the way to improve the practical reversible capacity of NCM622 at 4.0V. Conducting operando X-ray diffraction during galvanostatic charge/discharge cycling at different temperature (25 degrees C, 45 degrees C and 60 degrees C) and different current (0.1C, 0.01C, 1C=120 mA g -1 ) in the voltage range of 2.7-4.0V, we find that only 8% of the measured initial irreversible capacity loss is associated with parasitic reactions that form cathode/electrolyte interface, and that the dominant contributors include the slow Li + diffusion kinetics (similar to 46% contribution) and irreversible O3/H1-3 phase transition (similar to 46% contribution). Finally, this semi-quantitative study provides new insight on initial capacity loss, guiding further targeted modification and fully utilization of NCM622.

25 ENERGY STORAGE↗

Neutron imaging the spatial progression of chemical oxidation of lithium-ion cathode material in a packed bed reactor

Emerging electrochemical systems relevant to energy applications including redox targeted flow batteries rely on chemical redox of solid electroactive materials using dissolved redox couples. One configuration to facilitate contact between the redox shuttles and solid material which is volume efficient is a packed bed reactor. While methods have been reported to assess the overall progression by analysis of the packed bed reactor effluent, herein analysis of the spatial progression of the chemical redox will be reported. Combination of neutron and x-ray tomography enabled assessing the pore and particle structure in the packed bed reactor and the spatial homogeneity of the reaction at different overall extents of conversion of the reactor bed. Finally, these characterization tools provide methods to probe the chemical redox processes occurring within the reactor environment.

25 ENERGY STORAGE↗

Cobalt Dissolution from Metal Oxides and Battery Cathode Materials with Acetic Acid-Based Deep Eutectic Solvents

Recovery of critical metals with alternative solvents beyond those in traditional pyrometallurgy and hydrometallurgy is needed in consideration of environmental challenges and the growing demand for metals in energy technologies. Deep eutectic solvents (DESs) have emerged as sustainable alternatives for solvometallurgy in metal separation and recovery. In this study, DESs based on hydrogen bond acceptors (HBAs) including choline chloride (ChCl), acetylcholine chloride (AChCl), and betaine (Bet) were investigated for their effectiveness when paired with acetic acid (AA) as the hydrogen bond donor (HBD) for the dissolution of cobalt from cobalt oxide (CoO), lithium cobalt oxide (LiCoO 2 ), and lithium nickel manganese cobalt oxide (LNMC). Based on the spectroscopic analysis of the metal dissolution and coordination, Bet:AA was found to provide the highest solubility for CoO (0.33 M) in the form of an octahedral complex. On the other hand, ChCl:AA solvent was more effective at dissolving LiCoO 2 with 0.04 M Co 2+ corresponding to 17% dissolution efficiency and LNMC with 0.06 M Co 2+ corresponding to 72% dissolution efficiency at 50 °C, compared to Bet:AA (9% for LiCoO 2 and 31% for LNMC). Although the solubilities of LiCoO 2 and LNMC have not significantly improved in ChCl:AA, this difference in effectiveness between the solvents clearly reveals the role of the HBA in solubilization. The coordination synergy between the chloride and the –OH moiety facilitates the breakdown of the LiCoO 2 driven by the alteration of the solvent polarity. Cobalt in these solutions was found dominantly as a tetrahedral [CoCl 4 ] 2– complex. A chemical separation of cobalt oxalate from a mixed-metal oxide system based on Co, Fe, and Ni was also demonstrated, confirming the potential of these solvents for practical metal recovery.

Cobalt separation↗