Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Development Of Magnetic Fe-C Nanocomposites Obtained Via The Laser Pyrolysis: Structural And Disaggregation Properties

Fe-C) nanoparticles have been successfully synthesized using the laser pyrolysis method and variable nozzle geometries. At large nozzle diameters, XRD and SAED analysis clearly identified distinct {alpha}-Fe and Fe{sub 3}C phases. TEM and HRTEM indicated that these Fe-based nanoparticles have an average grain size of 3.5-10.2 nm. Temperature dependent Moessbauer spectra further confirm their distinct nanophases. By using a multi-step reduction procedure, Fe-C powders can be disaggregated into stable, water soluble nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Increase in the Tb{sup 3+} green emission in SiO{sub 2}-LaF{sub 3} nano-glass-ceramics by codoping with Dy{sup 3+} ions

95SiO{sub 2}-5LaF{sub 3} sol-gel derived nano-glass-ceramics single doped with 0.1Dy{sup 3+} or 0.1Tb{sup 3+} mol % and codoped with 0.1Dy{sup 3+} and xTb{sup 3+} (x=0.1,0.3) mol % were successfully obtained. XRD and HRTEM measurements confirm the precipitation of LaF{sub 3} nanocrystals during the ceramming process, with mean size ranging from 10 to 20 nm and increasing with the thermal treatment temperature. About 75% of lanthanide ions are partitioned into LaF{sub 3} nanocrystals, as calculated from luminescence decays. The effect of increasing the Tb{sup 3+} concentration and also of codoping with Dy{sup 3+} in the Tb{sup 3+} green emission from the {sup 5}D{sub 4} level have been studied. The energy transfer mechanisms between Tb{sup 3+} ions and also between Tb{sup 3+}-Dy{sup 3+} ions, which favor the green emission, have been analyzed.

36 MATERIALS SCIENCE↗

Thermoluminescence Characteristics of Nanocrystalline LiF Phosphors Synthesized at Different pH Values

Nanocrystalline lithium fluoride (LiF) phosphors have been prepared by the chemical co-precipitation method at different pH values (7.0, 8.0, 9.0). The formation of nanocrystalline structure has been confirmed by X-ray diffraction and transmission electron microscope. The thermolumniscence (TL) properties of LiF phosphors irradiated with gamma rays at different doses have been studied. The analysis of TL glow curve has revealed the existence of two well resolved glow peaks, one low temperature peak at around 145 deg. C and other one at higher temperature around 375 deg. C. The LiF nano-crystallites synthesized at 8.00 pH have been found to show maximum TL intensity at studied gamma doses (0.1 Gy-15 Gy).

36 MATERIALS SCIENCE↗

Mechanism of Charge Transport in Cobalt and Iron Phthalocyanine Thin Films Grown by Molecular Beam Epitaxy

Cobalt phthalocyanine (CoPc), iron phthalocyanine (FePc) and their composite (CoPc-FePc) films have been grown by molecular beam epitaxy (MBE). Grazing incidence X-ray diffraction (GIXRD) and scanning electron microscope (SEM) studies showed that composite films has better structural ordering compared to individual CoPc and FePc films. The temperature dependence of resistivity (in the temperature range 25 K- 100 K) showed that composite films are metallic, while individual CoPc and FePc films are in the critical regime of metal-to-insulator (M-I) transition The composite films show very high mobility of 110 cm{sup 2} V{sup -1} s{sup -1} at room temperature i.e. nearly two order of magnitude higher compared to pure CoPc and FePc films.

36 MATERIALS SCIENCE↗

Growth of M- and A-plane GaN on LiGaO{sub 2} by plasma-assisted MBE

We have performed non-polar M- and A-plane GaN growth on LiGaO{sub 2}(LGO) by plasma-assisted molecular beam expitaxy (MBE). We demonstrate that non-polar GaN growth on LGO yields high phase purity and flat surfaces. We find that annealing of the substrates prior to growth is a suitable method for avoiding a peeling off of the film from the substrate after growth.

36 MATERIALS SCIENCE↗

Coherent femtosecond low-energy single-electron pulses for time-resolved diffraction and imaging: A numerical study

We numerically investigate the properties of coherent femtosecond single electron wave packets photoemitted from nanotips in view of their application in ultrafast electron diffraction and non-destructive imaging with low-energy electrons. For two different geometries, we analyze the temporal and spatial broadening during propagation from the needle emitter to an anode, identifying the experimental parameters and challenges for realizing femtosecond time resolution. The simple tip-anode geometry is most versatile and allows for electron pulses of several ten of femtosecond duration using a very compact experimental design, however, providing very limited control over the electron beam collimation. A more sophisticated geometry comprising a suppressor-extractor electrostatic unit and a lens, similar to typical field emission electron microscope optics, is also investigated, allowing full control over the beam parameters. Using such a design, we find {approx}230 fs pulses feasible in a focused electron beam. The main limitation to achieve sub-hundred femtosecond time resolution is the typical size of such a device, and we suggest the implementation of more compact electron optics for optimal performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Microstructure and surface morphology of InAsSbBi grown by molecular beam epitaxy

The physical and chemical properties of 210 nm thick InAsSbBi layers grown by molecular beam epitaxy at temperatures between 400 and 430 °C on (100) GaSb substrates are investigated using Rutherford backscattering, X-ray diffraction, transmission electron microscopy, Nomarski optical microscopy, and atomic force microscopy. The results indicate that the layers are nearly lattice matched, coherently strained, and contain dilute Bi mole fractions. Large surface droplets with diameters on the order of 1 μm and densities on the order of 106 cm−2 are observed when the InAsSbBi growth is performed with lean As overpressures around 1%. Surface droplets are not observed when the As overpressure is increased to 4%. Small crystalline droplets with diameters on the order of 70 nm and densities on the order of 1010 cm−2 are observed between the large droplets for InAsSbBi grown at 430 °C. Analysis of one of the small droplets indicates a misoriented zinc blende crystal structure composed primarily of In, Sb, and Bi, with a lattice constant of 6.543 ± 0.038 Å. Lateral modulation in the Bi mole fraction is observed in InAsSbBi layers grown at 400 °C.

Kosireddy, R. R.↗

Measurement and effects of polarization fields on one-monolayer-thick InN/GaN multiple quantum wells

Polarization fields associated with one-monolayer-thick InN/GaN multiple quantum wells (MQWs) cause shifts of the photoluminescence peak that depend on the GaN barrier layer thickness. Diffraction contrast and aberration-corrected scanning transmission electron microscopy show that the InN QWs are well defined and coherently strained. Mapping of electrostatic potential using off-axis electron holography shows that the electric fields inside the GaN barriers decrease from ~0.7 to ~0.2 MV/cm as the barrier layer thickness increases from 5 to 20 nm. Atomistic tight-binding calculations agree closely with experiment, and confirm that changes in optical emission of these III-nitride quantum wells result from changes in the spontaneous and piezoelectric polarization fields in the InN quantum wells and the GaN barrier layers. Overall, this QW system provides the basis for InN-based light-emitting devices operating across a useful band of wavelengths at room temperature.

Zhou, Lin↗

Incorporation of trace elements in Portland cement clinker: Thresholds limits for Cu, Ni, Sn or Zn

This paper aims at defining precisely, the threshold limits for several trace elements (Cu, Ni, Sn or Zn) which correspond to the maximum amount that could be incorporated into a standard clinker whilst reaching the limit of solid solution of its four major phases (C{sub 3}S, C{sub 2}S, C{sub 3}A and C{sub 4}AF). These threshold limits were investigated through laboratory synthesised clinkers that were mainly studied by X-ray Diffraction and Scanning Electron Microscopy. The reference clinker was close to a typical Portland clinker (65% C{sub 3}S, 18% C{sub 2}S, 8% C{sub 3}A and 8% C{sub 4}AF). The threshold limits for Cu, Ni, Zn and Sn are quite high with respect to the current contents in clinker and were respectively equal to 0.35, 0.5, 0.7 and 1 wt.%. It appeared that beyond the defined threshold limits, trace elements had different behaviours. Ni was associated with Mg as a magnesium nickel oxide (MgNiO{sub 2}) and Sn reacted with lime to form a calcium stannate (Ca{sub 2}SnO{sub 4}). Cu changed the crystallisation process and affected therefore the formation of C{sub 3}S. Indeed a high content of Cu in clinker led to the decomposition of C{sub 3}S into C{sub 2}S and of free lime. Zn, in turn, affected the formation of C{sub 3}A. Ca{sub 6}Zn{sub 3}Al{sub 4}O{sub 15} was formed whilst a tremendous reduction of C{sub 3}A content was identified. The reactivity of cements made with the clinkers at the threshold limits was followed by calorimetry and compressive strength measurements on cement paste. The results revealed that the doped cements were at least as reactive as the reference cement.

36 MATERIALS SCIENCE↗

Facile synthesis of nanocrystalline wurtzite Cu-In-S by amine-assisted decomposition of precursors

Phase-pure ternary wurtzite Cu-In-S nanocrystals have been synthesized by a simple amine-assisted decomposition of mixed precursor complexes derived from S-methyl dithiocarbazate (SMDTC) at a relatively low temperature without using any external surfactant. The crystal phase, morphology, crystal lattice, and chemical composition of the as-prepared products were analyzed by using X-ray diffraction, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray spectroscopy (EDX). The optical properties show the pronounced quantum confinement effect in nanocrystals. A possible growth mechanism has been suggested for the formation of anisotropic wurtzite Cu-In-S It is believed that a combined effect of the chelating amine and precursors containing CH{sub 3}S unit plays a key role in the formation of the metastable phase of wurtzite Cu-In-S. - Graphical abstract: Phase-pure ternary wurtzite Cu-In-S nanocrystals have been synthesized by a simple amine-assisted decomposition of mixed precursor complexes derived from S-methyl dithiocarbazate (SMDTC) at a relatively low temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructures and photocatalytic properties of Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} films prepared by sol-gel method

Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} films were successfully prepared by the improved sol-gel and doping processes. The as-prepared specimens were characterized using differential thermal analysis-thermogravimetry (DTA-TG), X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (FE-SEM), X-ray energy dispersive spectroscopy (EDS), Brunauer-Emmett-Teller (BET) surface area, Photoluminescence spectrum (PL) and UV-vis diffuse reflectance spectroscopy. The photocatalytic activities of the films were evaluated by degradation of an organic dye in aqueous solution. The results of XRD, FE-SEM and BET analyses indicated that the TiO{sub 2} films were composed of nano-particles or aggregates with a size of less than 10 nm. With the codoping of Ag{sup +} and La{sup 3+}, TiO{sub 2} films with high photocatalytic activity and clearly responsive to the visible light were obtained. The improvement mechanism by ions doping was also discussed. - Graphical Abstract: The PL intensity of Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} was the lowest among all samples, indicating the recombination of electron and hole was effectively prohibited compared with pure TiO{sub 2}, Ag{sup +} and La{sup 3+} bulk codoped TiO{sub 2}. Highlights: > Ag{sup +} and La{sup 3+} codoping can reduce the crystal size of TiO{sub 2}. > Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} films have an obvious optical response red-shift. > Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} films can exhibit excellent photocatalytic activity under both UV and visible light irradiations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First discovery and structural characterization of a new compound in Al-Si-O-C system

A quaternary oxycarbide, [Al{sub 16.77(5)}Si{sub 1.23(5)}]{sub S}IGMA{sub 1{sub 8}}[O{sub 3.04(9)}C{sub 10.96(9)}]{sub S}IGMA{sub 1{sub 4}}, has been for the first time discovered in the Al-Si-O-C system. The crystal structure was characterized by X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The atom ratios [Al:Si] were determined by EDX, and the initial structural model was derived by the direct methods. The structural parameters as well as the atom ratios [O:C] were determined by the Rietveld method. The crystal is monoclinic (space group C2/m, Z=1) with lattice dimensions a=0.57404(1) nm, b=0.331435(5) nm, c=1.92410(2) nm, beta=90.036(1){sup o} and V=0.366076(9) nm{sup 3}. The final structural model showed the positional disordering of Al/Si sites. The validity of the split-atom model was verified by the three-dimensional electron density distribution, the structural bias of which was reduced as much as possible using the maximum-entropy methods-based pattern fitting (MPF). The reliability indices calculated from the MPF were R{sub wp}=4.20% (S=1.14), R{sub p}=3.09%, R{sub B}=0.92% and R{sub F}=1.05%. The crystal was an inversion twin with nearly the same twin fraction. - Graphical abstract: A quaternary oxycarbide firstly discovered in the Al-Si-O-C system. The crystal is an inversion twin, and hence the structure is represented by a split-atom model. The three-dimensional electron density distribution is determined by the maximum-entropy methods-based pattern fitting, being consistent with the disordered structural model.

36 MATERIALS SCIENCE↗

Synthesis, structures and photocatalytic activities of microcrystalline ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba) powders

Microcrystalline ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba) photocatalysts were successfully synthesized by a citrate complex method. The as-prepared samples were characterized by the X-ray diffraction technique, BET surface area analysis, UV-vis diffuse reflectance spectrum, transmission electron microscopy, X-ray photoelectron spectroscopy and inductively coupled plasma-atomic emission spectrometry. The results indicated that single-phase orthorhombic SrBi{sub 2}Nb{sub 2}O{sub 9} could be obtained after being calcined above 650 {sup o}C, while BaBi{sub 2}Nb{sub 2}O{sub 9} was tetragonal. Based on the diffuse reflectance spectra, the band gaps of the obtained samples were calculated to be around 3.34-3.54 eV. For the photocatalytic redox reaction of methyl orange under UV-light irradiation, SrBi{sub 2}Nb{sub 2}O{sub 9} exhibited higher photocatalytic activity than that of BaBi{sub 2}Nb{sub 2}O{sub 9}. The effects of the crystallinities, BET surface areas and crystal structures of the samples on the photocatalytic activities were discussed in detail. -- Graphical abstract: Aurivillius-type ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba) photocatalysts were successfully synthesized by a citrate complex method. SrBi{sub 2}Nb{sub 2}O{sub 9} and BaBi{sub 2}Nb{sub 2}O{sub 9} showed different photocatalytic performances in the redox reaction of methyl orange (MO) under UV-light ({lambda}=254 nm), due to the different crystal structures of ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba). Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Imaging and Coherence Beamline I13 at Diamond

The coherence and imaging beamline I13 is dedicated to hard x-ray imaging on the micro- and nano-lengthscale, performing microscopy either in direct or reciprocal space. For both, lens-based and lensless imaging, two independent stations will be operated in a separate building at a distance of 250 m from the source. The imaging branch will perform in-line phase contrast imaging and tomography over a large field of view in the 6- to 35-keV energy range. In addition, it will be possible to switch to full-field microscopy with 50-nm spatial resolution. Other microscopies will be developed according to the scientific needs. Resolution beyond the limitations given by the detector and x-ray optics will be achieved with techniques working in the far field. Coherent x-ray diffraction (CXRD) and other coherent diffraction imaging techniques such as ptychography will also be implemented on the same 'coherence' branch. The beamline hosts a number of innovative features such as the so-called 'mini-beta' layout for electron optics in the storage ring or new concepts for beamline instrumentation. The stations will be operational in 2011.

43 PARTICLE ACCELERATORS↗

Synthesis and structural characterization of a new aluminum oxycarbonitride, Al{sub 5}(O, C, N){sub 4}

A new aluminum oxycarbonitride, Al{sub 5}(O{sub x}C{sub y}N{sub 4-x-y}) (x{approx}1.4 and y{approx}2.1), has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and electron energy loss spectroscopy (EELS). The title compound was found to be hexagonal with space group P6{sub 3}/mmc, Z=2, and unit-cell dimensions a=0.328455(6) nm, c=2.15998(3) nm and V=0.201805(6) nm{sup 3}. The atom ratios O:C:N were determined by EELS. The final structural model, which is isomorphous with that of (Al{sub 4.4}Si{sub 0.6})(O{sub 1.0}C{sub 3.0}), showed the positional disordering of one of the three types of Al sites. The maximum-entropy method-based pattern fitting (MPF) method was used to confirm the validity of the split-atom model, in which conventional structure bias caused by assuming intensity partitioning was minimized. The reliability indices calculated from the MPF were R{sub wp}=6.94% (S=1.22), R{sub p}=5.34%, R{sub B}=1.35% and R{sub F}=0.76%. The crystal was an inversion twin. Each twin-related individual was isostructural with Al{sub 5}C{sub 3}N (space group P6{sub 3}mc, Z=2). - Graphical abstract: A new oxycarbonitride discovered in the Al-O-C-N system, Al{sub 5}(O{sub 1.4}C{sub 2.1}N{sub 0.5}). The crystal is an inversion twin, and hence the structure is represented by a split-atom model. The three-dimensional electron density distributions are determined by the maximum-entropy methods-based pattern fitting, being consistent with the disordered structural model. Display Omitted

36 MATERIALS SCIENCE↗

Synthesis, characterization and photocatalytic properties of novel zinc germanate nano-materials

We report the first instance of a hydrothermal synthesis of zinc germanate (Zn{sub 2}GeO{sub 4}) nano-materials having a variety of morphologies and photochemical properties in surfactant, template and catalyst-free conditions. A systematic variation of synthesis conditions and detailed characterization using X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, Raman spectroscopy, electron microscopy, X-ray photoelectron spectroscopy and small angle X-ray scattering led to a better understanding of the growth of these particles from solution. At 140 {sup o}C, the zinc germanate particle morphology changes with pH from flower-shaped at pH 6.0, to poly-disperse nano-rods at pH 10 when the Zn to Ge ratio in the synthesis solution is 2. When the Zn to Ge ratio is reduced to 1.25, mono-disperse nano-rods could be prepared at pH 7.5. Nanorod formation is also independent of the addition of cetyltrimethylammonium bromide (CTAB), in contrast to previous reports. Photocatalytic tests show that Zn{sub 2}GeO{sub 4} nano-rods (by weight) and flower shaped (by surface area) are the most active for methylene blue dye degradation among the synthesized zinc germanate materials. -- Graphical abstract: Zinc germanate materials were synthesized possessing unique morphologies dependent on the hydrothermal synthesis conditions in the absence of surfactant, catalyst or template. These novel materials are characterized and evaluated for their photocatalytic activities. Display Omitted highlights: > Zinc germanate synthesized hydrothermally (surfactant free) with unique morphologies. > Flower-shaped, nano-rods, globular particles obtained dependent on synthesis pH. > At 140 {sup o}C, they possess the rhombohedral crystal irrespective of synthesis conditions. > They are photocatalytically active for the degradation of methylene blue. > Potential applications could be photocatalytic water splitting and CO{sub 2} reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-assisted hydrothermal synthesis of marigold-like ZnIn{sub 2}S{sub 4} microspheres and their visible light photocatalytic activity

Marigold-like ZnIn{sub 2}S{sub 4} microspheres were synthesized by a microwave-assisted hydrothermal method with the temperature ranging from 80 to 195 Degree-Sign C. X-ray diffraction, X-ray photoelectron spectroscopy, nitrogen sorption analysis, UV-visible spectroscopy, scanning electron microscopy and transmission electron microscopy were used to characterize the products. It was found that the crystallographic structure and optical property of the products synthesized at different temperatures were almost the same. The degradation of methyl orange (MO) under the visible light irradiation has been used as a probe reaction to investigate the photocatalytic activity of as-prepared ZnIn{sub 2}S{sub 4}, which shows that the ZnIn{sub 2}S{sub 4} sample synthesized at 195 Degree-Sign C shows the best photocatalytic activity for MO degradation. In addition, the photocatalytic activities of all the samples prepared by the microwave-assisted hydrothermal method are better than those prepared by a normal hydrothermal method, which could be attributed to the formation of more defect sites during the microwave-assisted hydrothermal treatment. - Graphical abstract: Marigold-like ZnIn{sub 2}S{sub 4} microspheres were synthesized by a fast microwave-assisted hydrothermal method at 80-195 Degree-Sign C with a very short reaction time of 10 min. The as-prepared ZnIn{sub 2}S{sub 4} sample can be used as visible light photocatalyst for degradation of organic dyes. Highlights: Black-Right-Pointing-Pointer ZnIn{sub 2}S{sub 4} microspheres were synthesized by microwave-assisted hydrothermal method. Black-Right-Pointing-Pointer The crystal structure and optical property of the products were almost the same. Black-Right-Pointing-Pointer Increment of the temperature renders high surface area due to the bubbling effect. Black-Right-Pointing-Pointer The ZnIn{sub 2}S{sub 4} synthesized at 195 Degree-Sign C shows the best visible catalytic activity for MO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties of mortars made by uncalcined FGD gypsum-fly ash-ground granulated blast furnace slag composite binder

Highlights: Black-Right-Pointing-Pointer The mortar with uncalcined FGD gypsum has suitable workability. Black-Right-Pointing-Pointer The strength of mortar with uncalcined FGD gypsum is higher than that of mortar without uncalcined FGD gypsum. Black-Right-Pointing-Pointer The dry shrinkage of mortar with uncalcined FGD gypsum is lower than that of mortar without uncalcined FGD gypsum. Black-Right-Pointing-Pointer The leaching of sulfate ion of mortar is studied. - Abstract: A series of novel mortars were developed from composite binder of uncalcined FGD gypsum, fly ash (FA) and ground granulated blast furnace slag (GGBFS) for the good utilization of flue gas desulphurization (FGD) gypsum. At a fixed ratio (20%) of GGBFS to the composite binder, keeping consistency of the mortar between 9.5 and 10.0 cm, the properties of the composite mortar were studied. The results show that higher water/binder (W/B) is required to keep the consistency when increasing the percentage of FGD gypsum. No obvious influences of the W/B and content of FGD gypsum on the bleeding of paste were observed which keeps lower than 2% under all experimental conditions tried. The highest compressive and flexural strengths (ratio is 20% FGD gypsum, 20% GGBFS and 60% FA) are 22.6 and 4.3 MPa at 28 days, respectively. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results indicate that massive ettringite crystals and C-S-H gels exist in the hydration products. At 90 days the mortars with FGD gypsum is dramatically smaller drying shrinkage (563-938 micro strain) than that without FGD gypsum (about 2250 micro strain). The release of the SO{sub 4}{sup 2-} from the mortar was analyzed, indicating that the dissolution of sulfate increases with FGD gypsum. The concentration of SO{sub 4}{sup 2-} releasing from the mortar with 10% FGD gypsum is almost equal to that obtained from the mortar without FGD gypsum. The release of SO{sub 4}{sup 2-} from the mortar with 20% FGD gypsum is 9200 mg{center_dot}m{sup -2}, which is lower than that from the mortar with 95% cement clinker and 5% FGD gypsum.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗