Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Investigation of the Transport of Solar Ions Through the Earth's Magnetosphere

The objective of this study has been to infer, by statistical means, the most probable mode of entry of solar wind plasma into Earth's magnetotail, using a particular set of archived data from the Lockheed Plasma Composition Experiment on the International Sun-Earth Explorer One (ISEE-1) satellite, jointly sponsored by the National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) in the 1970's and 80's. Despite their considerable age, the Lockheed ISEE-1 data are still, at the time of this report, the only substantial ion composition data in the sub-keV to keV energy range available from the magnetotail beyond 9 R(sub E), because of various technical problems with ion mass spectrometers on later missions, and are therefore a unique source of information about the mixing of solar and terrestrial origin plasmas in the tail, within the ISEE-1 apogee of almost 23 R(sub E). The entire set of archived data used in this study, covering the 4.5 years of operation of the instrument and comprising not only tail measurements but also data from the inner magnetosphere as well as data from outside the magnetopause, is now available to the public via the WorldWideWeb at the address: http://cis.spasci.com/ISEE_ions The fundamental assumption of this and other studies of magnetosphere ion composition is that He++ and O+ ions are virtually certain "tags" of solar and terrestrial origins, respectively. This is an assumption with strong theoretical basis and it is corroborated by observational evidence, including the often substantial differences between the velocity distribution functions of those two species. The H+ ions can have a dual origin, in principle, but the close resemblance in the ISEE-1 data between the dynamics of H+ and He++ ions indicates a predominantly solar origin of the H+ ions in the tail, at least. By the same token, the usually minor He+ ions are probably almost entirely of terrestrial origin, because of their similarity to the O+ ions.

Lennartsson, O. W.↗
NASA NTRSDate not supplied

Constraints on the Origin of Mercury’s Large Core from Core-Mantle Differentiation Models

Mercury’s core is notoriously large when compared to other planets of our solar system. The origin of this large core is still uncertain. Available data on the surface composition and internal structure of Mercury from the past MESSENGER mission and future data collected by BepiColombo will continue to provide clues to Mercury’s formation. Here, we present results combining experimental data on elemental distribution between core and mantle with spacecraft data, to estimate bulk Mercury composition. We applied this strategy to major elements (Fe, Si, Mg, Al and O), as well as minor elements (Cr and Ti), and compared derived compositions to chondritic data and the chemical compositions of the other terrestrial planets. Our results show that Mercury has a chemical composition significantly different from all known materials of the solar system. In addition, numerous scenarios were proposed to explain Mercury’s structure, including “chaotic models” such as giant impacts and “orderly models” such as aerodynamic sorting. Here, we tested whether Mercury’s composition can be explained by mantle stripping by impacts. We will show how such a scenario reconciles several features of Mercury’s geochemistry with chondritic data. We will also discuss the outlook of additional constraints from supplementary data potentially collected by BepiColombo.

Mercury↗
NASA NTRS1991

A unified approach for composite cost reporting and prediction in the ACT program

The Structures Technology Program Office (STPO) at NASA Langley Research Center has held two workshops with representatives from the commercial airframe companies to establish a plan for development of a standard cost reporting format and a cost prediction tool for conceptual and preliminary designers. This paper reviews the findings of the workshop representatives with a plan for implementation of their recommendations. The recommendations of the cost tracking and reporting committee will be implemented by reinstituting the collection of composite part fabrication data in a format similar to the DoD/NASA Structural Composites Fabrication Guide. The process of data collection will be automated by taking advantage of current technology with user friendly computer interfaces and electronic data transmission. Development of a conceptual and preliminary designers' cost prediction model will be initiated. The model will provide a technically sound method for evaluating the relative cost of different composite structural designs, fabrication processes, and assembly methods that can be compared to equivalent metallic parts or assemblies. The feasibility of developing cost prediction software in a modular form for interfacing with state of the art preliminary design tools and computer aided design (CAD) programs is assessed.

Freeman, W. Tom↗
NASA NTRS1985

Water permeation and dielectric breakdown. Water permeability in Pub Tedlar. Pub/Tedlar as a function of temperature and humidity

Moisture transport and dielectric breakdown of polyvinyl butyral (PVB), Tedlar, and PVB/Tedlar composites were addressed. Data for the temperature range between 20 and 80 C showed that the moisture flux through the composite is governed by the slower material; and that the composite permeability is intermediate to those of the component material, as predicted by theory. Data for Tedlar at 71 C, showing the dependence of moisture flux on relative humidity, was also presented. Dielectric breakdown data were less precise and less conclusive. The generally applied theoretical model does not match the experimental data. The PVB/Tedlar composite exhibited greater voltage breakdown resistance than either component. Testing of EVA and EVA/Tedlar composites is underway.

Orehotsky, J.↗
NASA NTRS1999

Isotopic Constraints on the Genesis of Carbonates in Martian Meteorite ALH 84001

Oxygen isotopic analyses in approximately 20 micrometer spots in a chemically diverse suite of carbonates from ALH 84001 show highly variable delta(exp 18)O values from +5.4 to +25.3%. The isotopic data are correlated with the major element composition of the carbonate. The earliest forming (Ca-rich) carbonates have the lowest delta(exp 18)O values and the late-forming Mg-rich carbonates have the highest delta(exp 18)O values. Two models that can explain the isotopic variation were investigated. The carbonates could have formed in a water-rich environment at relatively low, but highly variable temperatures. In this open-system case the lower limit to the temperature variation is approximately 125 C, with fluctuations of over 250 C possible within the constraints of the model, depending on fluid composition. Alternatively the data can be explained by a closed-system model in which carbonates precipitated from a limited amount of a CO2-rich fluid. This scenario can reproduce the range of isotopic values observed, even at relatively high temperatures (greater than 500 C). Thus, the oxygen isotopic compositions do not provide unequivocal evidence for formation of the carbonates at low temperature. Neither of these scenarios is consistent with a biological origin of the carbonates and their associated features. Olivine from ALH 84001 occurs as clusters within orthopyroxene adjacent to fractures containing disrupted carbonate globules and feldspathic shock glass. The inclusions are irregular in shape and range in size from approximately 40 micrometers to submicrometer. The olivine exhibits a limited range of chemical composition from Fo(sub 65) to Fo(sub 66). We measured delta(exp 18)O values of the olivine to be +5.1 +/- 1.4%, indistinguishable within uncertainty from the host orthopyroxene. The data suggest that the olivine formed at high temperature (greater than 800 C), and is probably unrelated to carbonate formation. Instead the olivine probably formed by metamorphic reactions involving either dehydration of hydrous silicates or reduction of opx + spinel. If the reactions took place after carbonate formation, they could have caused devolatilization of siderite, producing the magnetite in the ALH carbonate globules. This scenario is also inconsistent with a biological origin for the features in ALH 84001.

Leshin, Laurie A.↗
NASA NTRS1986

SiC fiber reinforced reaction-bonded Si3N4 composites

A technique for fabricating strong and tough SiC fiber reinforced reaction bonded Si3N4 matrix composites (SiC/RBSN) was developed. Using this technique, composites containing approximately 23, 30, and 40 volume fractions of aligned 140 micron diameter, chemically vapor deposited SiC fibers were fabricated. The room temperature physical and mechanical properties were evaluated. The results for composite tensile strength, bend strength, and fracture strain indicate that the composite displays excellent properties when compared with the unreinforced matrix of comparable porosity. The composite stress at which the matrix first cracks and the ultimate composite fracture strength increase with increasing volume fraction of fibers, and the composite fails gracefully. The mechanical property data of this ceramic composite are compared with similar data for unreinforced commercially available Si3N4 materials and for SEP SiC/SiC composites.

Bhatt, Ramakrishna T.↗
NASA NTRS1974

Chemical composition of Luna 16 lunar regolith

Data on the chemical composition of regolith returned by the Luna 16 automatic station and two fragments of basalts from the lower layer of the core are presented. Spark mass spectrometric, primary X-ray spectral, emission spectral, and atomic absorption methods were used in the analysis. The regolith of mare provinces were shown to be a mixture of material of various origins. The source of the material of the mare regolith was principally basalts of the corresponding lunar lava maria. The regolith is genetically related to it. This follows from a comparison of the chemical composition, mineralogical, and petrochemical features of the basesalts and the regolith from the Sea of Fertility, Sea of Tranquillity, and Ocean of Storms, respectively.

Vinogradov, A. P.↗
NASA NTRS1972

Neutral composition in the thermosphere.

Data obtained from the Ogo 6 neutral atmospheric composition (NAC) experiment for a period of more than 1 year are used to compare the average constituent composition at an altitude of 400 km with that predicted by the Jacchia 1971 and 1965 models. The comparison shows that the Jacchia 1971 model underestimates the molecular nitrogen densities at 400 km by a factor of 2. An atmosphere is constructed down to 120 km by means of the Stein and Walker technique. A fit is made with (1) the 400-km total densities from drag measurements and the composition from Ogo 6 NAC, (2) the 250-km measured molecular nitrogen densities, and (3) the 150-km total densities from drag. This fit shows that the Jacchia 1971 model overestimates the atomic oxygen content at 150 km.

Taeusch, D. R.↗
NASA NTRS1993

Mechanical characterization of 2D, 2D stitched, and 3D braided/RTM materials

Braided composite materials have potential for application in aircraft structures. Fuselage frames, floor beams, wing spars, and stiffeners are examples where braided composites could find application if cost effective processing and damage tolerance requirements are met. Another important consideration for braided composites relates to their mechanical properties and how they compare to the properties of composites produced by other textile composite processes being proposed for these applications. Unfortunately, mechanical property data for braided composites do not appear extensively in the literature. Data are presented in this paper on the mechanical characterization of 2D triaxial braid, 2D triaxial braid plus stitching, and 3D (through-the-thickness) braid composite materials. The braided preforms all had the same graphite tow size and the same nominal braid architectures, (+/- 30 deg/0 deg), and were resin transfer molded (RTM) using the same mold for each of two different resin systems. Static data are presented for notched and unnotched tension, notched and unnotched compression, and compression after impact strengths at room temperature. In addition, some static results, after environmental conditioning, are included. Baseline tension and compression fatigue results are also presented, but only for the 3D braided composite material with one of the resin systems.

Deaton, Jerry W.↗
NASA NTRS1972

Lunar crust - Structure and composition.

Lunar seismic data from artificial impacts recorded at three Apollo seismometers are interpreted to determine the structure of the moon's interior to a depth of about 100 kilometers. In the Fra Mauro region of Oceanus Procellarum, the moon has a layered crust 65 kilometers thick. The seismic velocities in the upper 25 kilometers are consistent with those in lunar basalts. Between 25 and 65 kilometers., the nearly constant velocity (6.8 kilometers per second) corresponds to velocities in gabbroic and anorthositic rocks. The apparent velocity is high (about 9 kilometers per second) in the lunar mantle immediately below the crust.

Toksoz, M. N.↗
NASA NTRS1978

Signature analysis of acoustic emissions from composites

Acoustic emission data were obtained from a series of tensile tests on specially designed graphite-epoxy unidirectional laminates. The design was such that the specimens would preferentially fail first by fiber breakage and later by matrix splitting. The AE signals for each of these events was analyzed and some typical results are reported. Patterns characteristic of each failure mechanism were noted for both the time signatures and the corresponding frequency spectra.

Henneke, E. G., II↗
NASA NTRS1979

A model for correlating damage and ultrasonic attenuation in composites

Ultrasonic attenuation data measured by the pulse-echo technique have been obtained versus load for two graphite-epoxy laminates and are presented. The attenuation-load data display distinct changes at load values associated with the initiation of transverse cracks in the weakest plies and with the knee in the bilinear stress-strain curve. It was intended to determine if a simplified diffraction model could be used to account for the attenuation changes. The basis of the diffraction model is that transverse cracks or delaminations, or both, initiating and progressing in the specimen under the area covered by the ultrasonic transducer would cause diffraction of the ultrasonic beam and changes in the measured attenuation.

Hayford, D. T.↗
NASA NTRS1986

Hurricane structure and wind fields from stereoscopic and infrared satellite observations and radar data

Hurricane cloud and precipitation structure have been studied by means of IR and stereoscopic visual satellite data from synchronized scanning GOES-East and -West, in combination with ground-based radar data for Hurricane Frederico and time-composited airborne radar data for Hurricane Allen. It is noted that stereoscopically measured cloudtop height in these hurricanes is not as closely correlated to radar reflectivity at lower levels as it is in intense thunderstorms over land. This and other results obtained imply that satellite precipitation estimation techniques for tropical cyclones that are based on cloudtop measurements will not be accurate with respect to time and place scales that are less than several hours and a few hundred km, respectively.

Hasler, A. F.↗
NASA NTRS2003

Analysis of MGS TES Data over Acidalia Planitia and Cydonia Mensae: Compositional Evidence for Hydrovolcanic Activity?

For this study, Mars Global Surveyor (MGS) Thermal Emission Spectrometer (TES) emissivity data for Acidalia Planitia and Cydonia Mensae (Figure 1) were assembled and used to examine the surface mineralogy of these areas. Analyzing TES data for high latitude locales such as Acidalia presents a challenge since the surface temperatures over these regions is inherently lower than for equatorial locales. In this report, analyses of TES data are described and results are evaluated for potential compositional evidence for hydrovolcanic activity in Acidalia and Cydonia.

Farrand, W. H.↗
NASA NTRS2017

Inverse Method for Estimation of Composite Kink-Band Toughness from Open-Hole Compression Strength Data

Fiber-reinforced polymer matrix composite materials can fail by kink-band propagation mechanism when subjected to in-plane compressive loading. This mode of failure is especially prevalent in compressive loading of laminates with holes, cut-outs, or impact damage. Most of the successful models for predicting compressive strength of such laminates require “fracture” toughness associated with kink-band propagation under in-plane compression. However, this property is difficult to measure experimentally, limiting the use of such models in design practice. In this paper an inverse method is proposed to estimate the kink-band toughness of the laminate from its open-hole compression strength data, which is an easier property to measure experimentally. Furthermore, a scaling relationship is proposed to estimate kink-band toughness for other laminate configurations of the same material.

Luke Borkowski↗
NASA NTRS1982

Recent developments in the NSWC composite electrode

A characterization of the physical parameters and life cycle data on nickel composite electrodes was conducted. Attempts to improve the nickel composite electrodes with respect to longevity, light weight, and low cost were made. The physical characteristics of a group of electrodes were examined with emphasis on the porosity of the plaques, the thickness of the electrodes, and the potential presence of electrolytes contamination. It was concluded that the nickel composite electrodes exhibit good life cycle characteristics and that their fabrication seems to present real possibilities for the future as a method of making electrodes that are durable, lightweight, and low cost.

Ferrando, W. A.↗
NASA NTRS2003

Microcrack Quantification in Composite Materials by a Neural Network Analysis of Ultrasound Spectral Data

Intra-ply microcracking in unlined composite pressure vessels can be very troublesome to detect and when linked through the thickness can provide leak paths that may hinder mission success. The leaks may lead to loss of pressure/propellant, increased risk of explosion and possible cryo-pumping into air pockets within the laminate. Ultrasonic techniques have been shown capable of detecting the presence of microcracking and in this work they are used to quantify the level of microcracking. Resonance ultrasound methods are utilized with artificial neural networks to build a microcrack prediction/measurement tool. Two networks are presented, one unsupervised to provide a qualitative measure of microcracking and one supervised which provides a quantitative assessment of the level of microcracking. The resonant ultrasound spectroscopic method is made sensitive to microcracking by tuning the input spectrum to the higher frequency (shorter wavelength) components allowing more significant interaction with the defects. This interaction causes the spectral characteristics to shift toward lower amplitudes at the higher frequencies. As the density of the defects increases more interactions occur and more drastic amplitude changes are observed. Preliminary experiments to quantify the level of microcracking induced in graphite/epoxy composite samples through a combination of tensile loading and cryogenic temperatures are presented. Both unsupervised (Kohonen) and supervised (radial basis function) artificial neural networks are presented to determine the measurable effect on the resonance spectrum of the ultrasonic data taken from the samples.

Walker, James L.↗