SEARCH · Search NASA

Results for “correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Signature of Correlated Insulator in Electric Field Controlled Superlattice

On a two-dimensional crystal, a “superlattice” with nanometer-scale periodicity can be imposed to tune the Bloch electron spectrum, enabling novel physical properties inaccessible in the original crystal. While creating 2D superlattices by means of nanopatterned electric gates has been studied for band structure engineering in recent years, evidence of electron correlations-which drive many problems at the forefront of physics research-remains to be uncovered. Here, in this work, we demonstrate signatures of a correlated insulator phase in Bernal-stacked bilayer graphene modulated by a gate-defined superlattice potential, manifested as resistance peaks centered at integer multiples of single electron per superlattice unit cell carrier densities. The observation is consistent with the formation of a stack of flat low-energy bands due to the superlattice potential combined with inversion symmetry breaking. Our work paves the way to custom-designed superlattices for studying band structure engineering and strongly correlated electrons in 2D materials.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Design Rules for Open-Shell Molecular Wires: Insights from Correlated Many-Body Transport

Open-shell π-conjugated systems have emerged as promising molecular wires that can sustain unusually high low-bias conductance over tens of nanometers. However, predictive design rules remain limited because near-degeneracy and spin polarization give rise to correlated electronic states that are not reliably captured by standard density functional theory and Landauer transport descriptions. Here, we establish physically transparent design rules for long-range, weakly length-dependent charge transport based on the interplay between bond-length alternation and electron–electron interactions. Using a fully correlated transport framework that combines density matrix renormalization group calculations with nonequilibrium Green’s function embedding, we show that weak dimerization maintains spatially extended edge states, while moderate on-site interaction stabilizes open-shell character without excessively separating transport-relevant resonances. This balance yields zero-bias transmission that is largely insensitive to molecular length, providing a route to connect chemically tunable structure to correlated transport beyond mean-field descriptions.

Charge transport↗

DOE OSTI2024

Preserving Tracer Correlations in Moment-Based Atmospheric Transport Models

A linear non-diffusive algorithm for advective transport is developed that greatly improves the detail at which aerosols and clouds can be represented in atmospheric models. Linear advection schemes preserve tracer correlations but the most basic linear scheme is rarely used by atmospheric modelers on account of its excessive numerical diffusion. Higher-order schemes are in widespread use, but these present new problems as nonlinear adjustments are required to avoid occurrences of negative concentrations, spurious oscillations, and other non-physical effects. Generally successful at reducing numerical diffusion during the advection of individual tracers, for example, particle number or mass, the higher-order schemes fail to preserve even the simplest of correlations between interrelated tracers. As a result, important attributes of aerosol and cloud populations including radial moments of particle size distributions, molecular precursors related through chemical equilibria, aerosol mixing state, and distribution of cloud phase are poorly represented. We introduce a new transport scheme, minVAR, that is both non-diffusive and preservative of tracer correlations, thereby combining the best features of the basic and higher-order schemes while enabling new features such as the tracking of sub-grid information at arbitrarily fine scales with high computational efficiency.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Azimuthal correlation anisotropies in p + p collisions simulated using Pythia

Stimulated by a keen interest in possible collective behavior in high-energy proton-proton and proton-nucleus collisions, we study two-particle angular correlations in pseudorapidity and azimuthal differences in simulated p + p interactions using the Pythia 8 event generator. Multi-parton interactions and color connection are included in these simulations, which have been perceived to produce collectivity in final-state particles. Meanwhile, contributions from genuine few-body nonflow correlations, not of collective flow behavior, are known to be severe in these small-system collisions. We present our Pythia correlation studies pedagogically and report azimuthal harmonic anisotropies analyzed using several methods. We observe anisotropies in these Pythia simulated events qualitatively and semi-quantitatively, similar to experimental data. Furthermore, our findings highlight the delicate nature of azimuthal anisotropies in small-system collisions and provide a benchmark that can aid in improving data analysis and interpreting experimental measurements in small-system collisions.

Pythia↗

DOE OSTI2025

Scanning Transmission Electron Microscopy–Atom Probe Tomography Correlative Analysis for the Characterization of Solute-defect Interactions

Atom probe tomography (APT) and (scanning) transmission electron microscopy ((S)TEM) are complementary techniques that provide spatially resolved chemical and structural information at the atomic scale. Here, in this study, we employ two different STEM/APT correlative analysis methods to investigate Cr segregation at dislocation loops in ultra-high purity Fe–Cr alloys. APT needles for the correlative analysis were extracted either from bulk material or from thinned TEM lamellae. STEM analysis was used to determine the Burgers vectors of ion-irradiation-induced dislocation loops, while APT reconstruction of the same region revealed the Cr segregation to these loops. We extended the g•b = 0 invisibility criterion of dislocation loops from TEM mode in a lamella to STEM mode in a needle-shaped specimen. STEM and APT analysis on the same needle provide straightforward correlative analysis, although it is limited by a small observation volume. In contrast, iterative STEM analysis of TEM lamellae, followed by the selective extraction of specific regions of interest for APT analysis, expands the observation area by up to 100 times but requires additional time-consuming steps for APT needle extraction from the lamellae.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

Measurement of turbulent velocity and bounds for thermal diffusivity in laser shock compressed foams by x-ray photon correlation spectroscopy

Experimental benchmarking of transport coefficients under extreme conditions is required for validation of differing theoretical models. To date, measurement of transport properties of dynamically compressed samples remains a challenge with only a limited number of studies able to quantify transport in high pressure and temperature matter. x-ray photon correlation spectroscopy utilizes coherent x-ray sources to measure time correlations of density fluctuations, thus providing measurements of length and timescale-dependent transport properties. Here, we present a first-of-a-kind experiment to conduct x-ray photon correlation spectroscopy in laser shock compression experiments. We report measurement of the turbulent velocity in the wake of a laser driven supersonic shock and place an upper bound on thermal diffusivity in a solid density plasma on nanosecond timescales.

High-energy-density plasmas↗

DOE OSTI2024

Dynamical correlations leading to site and orbital selective Mott insulator transition in hydrogen doped SmNiO 3

Electron doping induces metal -to -insulator transition (MIT) in SmNiO 3 as realized by experiments. While earlier density functional theory (DFT) studies with static correlations fell short of explaining the recent MIT observations at lower hydrogen concentrations, we present a comprehensive computational investigation employing an advanced approach. We combine DFT with dynamical mean field theory (DFT + DMFT) to efficiently analyze the insulating behavior of hydrogen -doped SmNiO 3 . In contrast to previous theoretical works, our calculations predict an insulator transition occurring at a reduced doping level of H:Ni = 0.5:1. Specifically, while the DFT + U method reveals a gap opening between p-to-d orbitals, the DMFT approach highlights a gap opening between d-to-d orbitals. Our findings uncover a selective Mott transition in site and orbital characteristics, with the Ni ions proximate to the doped hydrogen exhibiting Mott -like traits. Notably, DMFT calculations highlight a pronounced dependence on Hund's parameter J, implying the presence of Hundness in the Mott insulator. Finally, this study underscores the necessity of accounting for dynamical correlations to accurately describe the electronic structure of strongly correlated electron-doped rare-earth nickelates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Correlation effects on coupled electronic and structural properties of doped rare-earth trihydrides

Rare-earth trihydride (𝑅⁢H 3 ) compounds exhibit intriguing coupled electronic and structural properties as a function of doping, hydrogen vacancies, and thermodynamic conditions. Theoretical studies of these materials typically rely on density functional theory (DFT), including the use of small supercells that may underestimate strong correlation effects and structural distortions which in turn may influence their metallicity. Here, we elucidate the roles of lattice distortions and correlation effects on the electronic properties of pristine and doped 𝑅⁢H 3 compounds by adopting DFT +U and quantum Monte Carlo (QMC) methods. Linear-response constrained DFT (LR-cDFT) methods find Hubbard U ≈ 2 eV for 𝑅 𝑑 orbitals and U ≈ 6 eV for H 𝑠 ⁡/N 𝑝 /O 𝑝 orbitals. The small U on Lu 𝑑 orbitals is consistent with QMC calculations on LuH 3 and LuH 2.875 ⁢N 0.125 . In pure face-centered-cubic (FCC) 𝑅⁢H 3 (𝑅 = Lu,Y) compounds, neither DFT nor DFT +U with the self-consistently determined U is enough to create a band gap, however a supercell with hydrogen distortions creates a small gap whose magnitude increases when performing DFT +U with self-consistently determined U values. Furthermore, correlation effects, in turn, have a moderate influence on the coupled structural and electronic properties of doped 𝑅⁢H 3 compounds and may be important when considering the competition between structural distortions and superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Quantum computing for energy correlators

In recent years, energy correlators have emerged as powerful observables for probing the fragmentation dynamics of high-energy collisions. We introduce the first numerical strategy for calculating energy correlators using the Hamiltonian lattice approach, providing access to the intriguing nonperturbative dynamics of these observables. Furthermore, motivated by rapid advances in quantum computing hardware and algorithms, we propose a quantum algorithm for calculating energy correlators in quantum field theories. This algorithm includes ground state preparation, the application of source, sink, energy flux and real-time evolution operators, and the Hadamard test. We validate our approach by applying it to the SU(2) pure gauge theory in 2 + 1 dimensions on 3 × 3 and 5 × 5 honeycomb lattices with 𝑗 max = $\frac{1}{2}$ at various couplings, utilizing both classical methods and the quantum algorithm, the latter tested using the IBM emulator for specific configurations. The results are consistent with the expected behavior of the strong coupling regime and motivate a more comprehensive study to probe the confinement dynamics across the weak and strong coupling regimes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Novel phenomena in transition-metal oxide thin films and heterostructures with strong correlations and spin-orbit coupling

Transition-metal oxides have been a central subject of condensed matter physics for decades. In addition to novel electronic states driven by the influence of strong correlation, relativistic spin-orbit coupling effects have recently attracted much attention for their potential to explore topological phenomena. Here, in this article, we review various experimental and theoretical studies on transition-metal oxides with focus on thin films and heterostructures where their physics is much influenced by correlation effects and spin-orbit coupling. The combination of the heterostructure geometry together with correlation and topology leads to a variety of novel states here reviewed. We also discuss perspectives for future research in this broad promising area.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Homomorphic data compression for real time photon correlation analysis

The construction of highly coherent X-ray sources, combined with next-generation detectors that are larger and faster, has enabled new research opportunities across the scientific landscape. Among the techniques that benefit most from these advancements is X-ray photon correlation spectroscopy (XPCS), where faster acquisition unlocks the ability to study faster dynamics within samples. However, faster acquisition on larger detectors also introduces unprecedented challenges for online data processing and offline data storage. Such challenges are particularly prominent for XPCS, where real time analyses require simultaneous calculation of all the previously acquired data in the time series. We present a homomorphic compression scheme to effectively reduce the computational time and memory space required for XPCS analysis. Leveraging similarities in the mathematical expression between a matrix-based compression algorithm and the correlation calculation, our approach allows direct operation on the compressed data without their decompression. The offline compression scheme extends storage capacity by a factor of 40 while preserving key features in the lossy compressed data. Meanwhile, the online compression scheme reduces the computational time to below 1 ms, enabling real time calculation of the correlation functions at kHz framerate. Our demonstration of a homomorphic compression of scientific data provides an effective solution to the big data challenge at coherent light sources. Beyond the example shown in this work, the framework can be extended to facilitate real-time operations directly on a compressed data stream for other techniques.

36 MATERIALS SCIENCE↗

NASA NTRS2011

Effects of Tropospheric Spatio-Temporal Correlated Noise on the Analysis of Space Geodetic Data

The standard VLBI analysis models measurement noise as purely thermal errors modeled according to uncorrelated Gaussian distributions. As the price of recording bits steadily decreases, thermal errors will soon no longer dominate. It is therefore expected that troposphere and instrumentation/clock errors will increasingly become more dominant. Given that both of these errors have correlated spectra, properly modeling the error distributions will become more relevant for optimal analysis. This paper will discuss the advantages of including the correlations between tropospheric delays using a Kolmogorov spectrum and the frozen ow model pioneered by Treuhaft and Lanyi. We will show examples of applying these correlated noise spectra to the weighting of VLBI data analysis.

thermal noise↗

NASA NTRS2018

International Space Station Model Correlation Analysis

This paper summarizes the on-orbit structural dynamic data and the related modal analysis, model validation and correlation performed for the International Space Station (ISS) configuration ISS Stage ULF7, 2015 Dedicated Thruster Firing (DTF). The objective of this analysis is to validate and correlate the analytical models used to calculate the ISS internal dynamic loads and compare the 2015 DTF with previous tests. During the ISS configurations under consideration, on-orbit dynamic measurements were collected using the three main ISS instrumentation systems; Internal Wireless Instrumentation System (IWIS), External Wireless Instrumentation System (EWIS) and the Structural Dynamic Measurement System (SDMS). The measurements were recorded during several nominal on-orbit DTF tests on August 18, 2015. Experimental modal analyses were performed on the measured data to extract modal parameters including frequency, damping, and mode shape information. Correlation and comparisons between test and analytical frequencies and mode shapes were performed to assess the accuracy of the analytical models for the configurations under consideration. These mode shapes were also compared to earlier tests. Based on the frequency comparisons, the accuracy of the mathematical models is assessed and model refinement recommendations are given. In particular, results of the first fundamental mode will be discussed, nonlinear results will be shown, and accelerometer placement will be assessed.

Modal Analysis↗

NASA NTRS2015

A Heuristic Approach to Correlating ERAM Flight Data from Twenty Centers

Among its many other functions, the Federal Aviation Administration’s En Route Automation Modernization (ERAM) provides external systems with real-time air traffic data for flights in enroute airspace in the National Airspace System. It replaced the En Route Host computer and backup system used at 20 FAA Air Route Traffic Control Centers (Centers) nationwide. Among the new features of ERAM, its output data stream of flight plan and track data includes a unique identifier for a flight originating in any one of the 20 ERAM Centers. The unique identifier, called the Global Unique Flight Identifier (GUFI), is persistent across all the Centers that track the flight. However, certain factors make it difficult to correlate data using the GUFI. First, the value of the GUFI is only unique within a time window of seven days. Second, the GUFI is attached only to flight-plan related data messages. Finally, track positions reported by ERAM do not reference the GUFI. In order to correlate historical as well as real time flight-plan and position related ERAM data, an efficient, heuristic approach was developed, and a prototype was developed. The approach showed that the processing speed, through parallel processing, is sufficient to correlate ERAM data in real-time. As described in this paper, when there are multiple track positions reported from multiple Centers within a few seconds, each position is assigned with a weighted score to indicate the quality of the position relative to its last know position. The weighted score can be used to eliminate potentially duplicate track positions. The approach is database-agnostic, and can be implemented in a Big Data system such as an Apache Hadoop system, as well as in traditional database systems.

Correlating ERAM Flight Data↗

NASA NTRSDate not supplied

Modal Correlation of Complex Aerospace Joints Using Automated Variable Substitution

A critical task involved with being able to predict flight loads accurately in aerospace finite element models (FEMs) is the prior verification of the FEMs by conducting modal survey testing (MST). Experience comparing dynamic response of initial FEMs to MST data tends to demonstrate that FEMs can have unacceptable accuracy even when best modeling practices are followed. One inherent source of inaccuracy in linear dynamic FEMs is the modeling of nonlinear joints with mechanisms such as spherical bearings. These joints are usually designed to freely translate or rotate under the high levels of loading experienced in flight. Engineers who create linear FEMs conventionally model these joints without any stiffness in the mechanism degrees of freedom to meet this design intent. However, inaccuracy is observed during test validation of these FEMs, which usually relies on low-level force excitation orders of magnitude below flight load levels. This low-level modal test rarely overcomes the joint friction that is present, and thus the mechanism joints are able to react loads. This divide between the test results and the FEM creates a significant challenge to the engineer who is performing the correlation, in that the engineer has no basis for what stiffness value should be used to make the FEM match the test results. A compounding challenge is that complicated built-up aerospace structures commonly have multiple joints through a load path where each joint will “stick” and “slip” at different levels of force input. Explicitly matching the dynamics of a system containing these nonlinear mechanisms would require a nonlinear FEM, which is prohibitively costly for dynamic simulations of most aerospace systems. The objective of this paper is to present a workflow that can efficiently cycle through many iterations of a FEM, allowing a Monte Carlo style examination of the design space to identify candidate stiffness values for nonlinear mechanism joints. The outlined approach is specific to MSC Nastran and utilizes MSC Nastran’s symbolic substitution capabilities, coupled with the IMAT™ and Attune™ software packages developed by ATA Engineering, Inc. (ATA). The workflow is demonstrated with a case study from the correlation effort for The Boeing Company’s Crew Space Transportation (CST)-100 Starliner FEM. Keywords: Correlation, MSC Nastran, IMAT™, Attune™, Finite Element Model, Modal Testing

Correlation↗

NASA NTRSDate not supplied

How to Educate Decision Makers on the Value and Necessity of Modal Testing and Model Correlation: Tips for Young Engineers

Engineers need to effectively communicate the justification and value of their modal testing and model correlation in terminology familiar to decision makers as it relates to the program’s risk tolerance. This communication must relate to the program’s risk tolerance and the metrics used to judge the performance of both the program and individual decision makers. The challenge is the terminologies familiar to engineers and decision makers are quite different and seemingly unrelated. The engineering profession has developed a specific terminology to solve highly technical issues, which are many times themselves unique to very specific engineering problems. It is all too easy for engineers to believe that everyone in their organization, including the decision makers, has an intrinsic understanding of what they do and the value it brings to the program’s success. This is especially true for young engineers who have recently spent the last four plus years in an academic engineering learning environment, which has a highly technical research oriented atmosphere. Effective communication with decision makers is increasingly important as the technical breadth and practical program and project experience level for up and coming decision makers diminishes. It is not unusual for the decision makers to have technical knowledge in a domain different from structural dynamics (e.g., electronics or systems). Competition among satellite manufactures has increased the focus on programmatic cost and ability to deliver on schedule. NASA programs are also seeing more restrictive programmatic cost and schedule constraints, which impact both analysis and testing. It should also be noted that a comprehensive suite of tests are required to verify a satellite’s design capability with some margin. These tests include static strength verification tests, shock, acoustic, and vibration tests (sine and random) of systems, subsystems, and components. Each of these verification tests provide opportunities for model correlation and risk reduction. It is important to recognize dynamic loads/modal test models may not include all of the flight hardware (i.e., harness, coax, waveguides, connectors, etc.) and the previously mentioned tests are still required for qualification/verification of the design. This paper provides tips to young engineers on how to bridge this communications gap, have a better understanding of the environment in which decision makers operate, and assist them to better support successful missions. While this paper primarily focuses on modal testing and model correlation as related to spacecraft missions, the concepts and recommendations presented here are equally applicable to other fields such as aeronautics, automotive, power generation, etc.

Decision Maker↗

NASA NTRSDate not supplied

How to Educate Decision Makers on the Value and Necessity of Modal Testing and Model Correlation: Tips for Young Engineers

Decision Maker↗

NASA NTRSDate not supplied

Utilizing 3D-DIC on Mars 2020 Rover Wheel Assembly: Test-Analysis Correlation

Following the successful implementation of full-field photogrammetry, more specifically three-dimensional Digital Image Correlation (3D-DIC), on the Mars 2020 Heat Shield Structural Failure Review assessment, 3D-DIC was selected as one of the primary measurement techniques for the Mars 2020 Rover wheel assembly qualification test at the NASA Jet Propulsion Laboratory (JPL). To validate the Rover wheel landing loads simulations, it was extremely important to have high confidence in the wheel models. Due to the large deformations and strains that the wheel would be subject to during landing, traditional instrumentation such as linear variable displacement transducers (LVDTs), electrical-resistance strain gages and string potentiometers, would not be sufficient on their own to provide all the necessary validation data. Therefore, the NASA Engineering and Safety Center (NESC) provided the 3D-DIC expertise and support to measure the high deformation and strain in the wheel flexures and qualify the overall structural response of the Mars 2020 rover wheel assembly. There were two key objectives for the photogrammetry technique: (1) monitor the wheel response in real-time, guarding against anomalous behavior and failure, and (2) provide test data for test-analysis correlation to validate and/or improve the high-fidelity computational model. The contents of this paper will focus on the challenges of applying 3D-DIC to the Mars 2020 Rover wheel assembly and how these challenges were overcome. Examples of test-analysis correlation during the stiffness characterization and structural qualification will be presented and discussed in detail. Experimental results were compared with the analysis and showed excellent agreement between the predicted behavior and helped validate the high-fidelity models.

Mars 2020 Rover Wheel↗