Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Experimental Identification of Bistable Flow States on the Space Launch System at Liftoff Conditions

Time-averaged global force and moment measurements in wind tunnel tests can obscure complex flow dynamics, including bistability phenomena. This paper presents a detailed analysis into the potential cause of previously unobserved discrepancies among repeat runs during the 202114- by 22-Foot Subsonic Tunnel test of the Space Launch System. During the test, it was observed that liftoff configuration repeatability was not as strong as expected when compared to previous tests. These discrepancies occurred between wind angle azimuths of approximately 150◦ and 210◦, as well as between 330◦ and 30◦. After ruling out common confounding factors such as instrumentation hysteresis and temperature, it was hypothesized that the lack of repeatability was caused by the Coandă effect producing a bistable flow state at different locations between the cylindrical rocket centerbody and solid rocket boosters during the acquisition of data. Evidence to support this hypothesis is provided in this paper in the form of time-averaged force and moment coefficient data, time-dependent force and moment coefficient data, and still images from smoke flow and tuft flow visualization runs.

SLS↗

An Assessment of GEO Orbital Debris Photometric Properties Derived from Laboratory-Based Measurements

Optical observations of orbital debris offer insights that differ from radar measurements (specifically the size parameter and wavelength regime). For example, time-dependent photometric data yield lightcurves in multiple bandpasses that aid in material identification and possible periodic orientations. This data can also be used to help identify shapes and optical properties at multiple phase angles. Capitalizing on optical data products and applying them to generate a more complete understanding of orbital space objects, is a key objective of NASA s Optical Measurement Program, and a primary driver for creation of the Optical Measurements Center (OMC). The OMC attempts to emulate space-based illumination conditions using equipment and techniques that parallel telescopic observations and source-target-sensor orientations. The OMC uses a 300 Watt Xenon arc lamp as a solar simulator, a CCD camera with Johnson/Bessel colored filters, and a robotic arm to orientate/rotate objects to simulate an object's orbit/rotational period. A high-resolution, high bandwidth (350nm-2500nm) Analytical Spectral Devices (ASD) spectrometer is also employed to baseline various material types. Since observation of GEO targets are generally restricted to the optical regime (due to radar range limitations), analysis of their properties is tailored to those revealed by optical data products. In this connection, much attention has been directed towards understanding the lightcurves of orbital debris with high area-to-mass (A/m) ratios (greater than 0.9 square meters per kilogram). A small population of GEO debris was recently identified, which exhibits the properties of high A/m objects, such as variable eccentricities and inclinations a dynamical characteristic generally resulting from varying solar radiation pressure on high A/m objects. Materials such as multi-layered insulation (MLI) and solar panels are two examples of materials with high area-to mass ratios. Lightcurves for such objects can vary greatly (even for the same object under different illumination conditions). For example, specular reflections from multiple facets of the target surface (e.g. Mylar or Aluminized Kapton) can lead to erratic, orientation-dependent light curves. This paper will investigate published color photometric data for a series of orbital debris targets and compare it to the empirical photometric measurements generated in the OMC. The specific materials investigated (known to exist in GEO) are: an intact piece of MLI, separated layers of MLI, and multiple solar cells materials. Using the data acquired over specific rotational angles through different filters (B, V, R, I), a color index is acquired (B-R, R-I). As a secondary check, the spectrometer is used to define color indexes for the same material. Using these values and their associated lightcurves, this laboratory data is compared to observational data obtained on the 1m telescope of the Astronomical Institute of the University of Bern (AUIB) and the 0.9 m Small and Moderate Aperture Research Telescope System (SMARTS) telescope at Cerro Tololo Inter-American Observatory (CTIO). We will present laboratory generated lightcurves with color indexes of the high A/m materials alongside telescopic data of targets with high A/m values. We will discuss the relationship of laboratory to telescope data in the context of classification of GEO debris objects.

Rodriquez-Cowardin, H.↗

Bohr Hamiltonian with a deformation-dependent mass term for the Davidson potential

Analytical expressions for spectra and wave functions are derived for a Bohr Hamiltonian, describing the collective motion of deformed nuclei, in which the mass is allowed to depend on the nuclear deformation. Solutions are obtained for separable potentials consisting of a Davidson potential in the {beta} variable, in the cases of {gamma}-unstable nuclei, axially symmetric prolate deformed nuclei, and triaxial nuclei, implementing the usual approximations in each case. The solution, called the deformation-dependent mass (DDM) Davidson model, is achieved by using techniques of supersymmetric quantum mechanics (SUSYQM), involving a deformed shape invariance condition. Spectra and B(E2) transition rates are compared to experimental data. The dependence of the mass on the deformation, dictated by SUSYQM for the potential used, reduces the rate of increase of the moment of inertia with deformation, removing a main drawback of the model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Storm Surge Measurement with an Airborne Scanning Radar Altimeter

Over the years, hurricane track and intensity forecasts and storm surge models and the digital terrain and bathymetry data they depend on have improved significantly. Strides have also been made in knowledge of the detailed variation of the surface wind field driving the surge. The area of least improvement has been in obtaining data on the details of the temporal/spatial variation of the storm surge dome of water as it evolves and inundates the land to evaluate the performance of the numerical models. Tide gages in the vicinity of the landfall are frequently destroyed by the surge. Survey crews dispatched after the event provide no temporal information and only indirect indications of the maximum surge envelope over land. The landfall of Hurricane Bonnie on 26 August 1998, with a surge less than 2 m, provided an excellent opportunity to demonstrate the potential benefits of direct airborne measurement of the temporal/spatial evolution of storm surge. Despite a 160 m variation in aircraft altitude, an 11.5 m variation in the elevation of the mean sea surface relative to the ellipsoid over the flight track, and the tidal variation over the 5 hour data acquisition interval, a survey-quality Global Positioning System (GPS) aircraft trajectory allowed the NASA Scanning Radar Altimeter carried by a NOAA hurricane research aircraft to produce storm surge measurements that generally fell between the predictions of the NOAA SLOSH model and the North Carolina State University storm surge model.

Wright, C. W.↗

Yttrium aluminium garnet under pressure: Structural, elastic, and vibrational properties from ab initio studies

The structural, elastic, and vibrational properties of yttrium aluminum garnet Y{sub 3}Al{sub 5}O{sub 12} are studied under high pressure by ab initio calculations in the framework of the density functional theory. The calculated ground state properties are in good agreement with the available experimental data. Pressure dependences of bond length and bulk moduli of the constituent polyhedra are reported. The evolution of the elastic constants and the major elastic properties, Young and shear modulus, Poisson's ratios, and Zener anisotropy ratio, are described. The mechanical stability is analyzed, on the light of “Born generalized stability criteria,” showing that the garnet is mechanically unstable above 116 GPa. Symmetries, frequencies, and pressure coefficients of the Raman-active modes are discussed on the basis of the calculated total and partial phonon density of states, which reflect the dynamical contribution of each atom. The relations between the phonon modes of Y{sub 3}Al{sub 5}O{sub 12} and the internal and external molecular modes of the different polyhedra are discussed. Infrared-active modes, as well as the silent modes, and their pressure dependence are also investigated. No dynamical instabilities were found below 116 GPa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards a Preservation Content Standard for Earth Observation Data

Information from Earth observing missions (remote sensing with airborne and spaceborne instruments, and in situ measurements such as those from field campaigns) is proliferating in the world. Many agencies across the globe are generating important datasets by collecting measurements from instruments on board aircraft and spacecraft, globally and constantly. The data resulting from such measurements are a valuable resource that needs to be preserved for the benefit of future generations. These observations are the primary record of the Earths environment and therefore are the key to understanding how conditions in the future will compare to conditions today. Earth science observational data, derived products and models are used to answer key questions of global significance. In the near-term, as long as the missions data are being used actively for scientific research, it continues to be important to provide easy access to the data and services commensurate with current information technology. For the longer term, when the focus of the research community shifts toward new missions and observations, it is essential to preserve the previous mission data and associated information. This will enable a new user in the future to understand how the data were used for deriving information, knowledge and policy recommendations and to repeat the experiment to ascertain the validity and possible limitations of conclusions reached in the past and to provide confidence in long term trends that depended on data from multiple missions. Organizations that collect, process, and utilize Earth observation data today have a responsibility to ensure that the data and associated content continue to be preserved by them or are gathered and handed off to other organizations for preservation for the benefit of future generations. In order to ensure preservation of complete content necessary for understanding and reusing the data and derived digital products from todays missions, it is necessary to develop a specification of such preservation content. While there are existing standards that address archival and preservation in general, there are no existing international standards or specifications today to address what content should be preserved. The purpose of this paper is to outline briefly the existing standards that apply to preservation, describe a recent effort in getting an international standard in place for specifying preservation content for Earth observation data and derived digital data products and the remaining work needed to arrive at a standard.

ISO Standards↗

Dual modulation of the anion-driven thermodynamic properties of aqueous choline halide-based deep eutectic solvents

Deep eutectic solvents (DESs) are considered tunable solvents because their specific properties can be achieved based on the choice of components and their relative concentrations in a mixture. In this article, we investigate the influence of the variation in halide ions (F − , Cl − , Br − , I − ) of choline salts used on the thermodynamic and physicochemical properties of choline halide-based DESs. Our findings show that the density of choline halide-based DESs decreases nonlinearly with an increasing mole fraction of water, following a trend based on the size of the halides, with choline iodide showing the highest density. Temperature-dependent density data reveal that the thermal expansion coefficient decreases slightly with increasing water content, indicating a more stable volume at a higher mole fraction of water. The excess molar volume (V E ) of the DES mixtures exhibits complex behavior depending on the choline halide used, with both negative and positive V E values observed across different water mole fractions. These variations are linked to the hydrogen bonding interactions between the DES components and water molecules. In addition, viscosities decrease with increasing water content, suggesting the disruption of hydrogen bonding networks and enhanced mobility of the ions, which contributes to the observed increase in conductivity. The excess molar Gibbs energies, enthalpies, and entropies of activation have also been determined.

Choline halide↗

Data Fusion for a Vision-Radiological System: a Statistical Calibration Algorithm

Presented here is a fusion system based on simple, low-cost computer vision and radiological sensors for tracking of multiple objects and identifying potential radiological materials being transported or shipped. The main focus of this work is the development of calibration algorithms for characterizing the fused sensor system as a single entity. There is an apparent need for correcting for a scene deviation from the basic inverse distance-squared law governing the detection rates even when evaluating system calibration algorithms. In particular, the computer vision system enables a map of distance-dependence of the sources being tracked, to which the time-dependent radiological data can be incorporated by means of data fusion of the two sensors' output data. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Reducing the Parameter Dependency of Phase-Picking Neural Networks with Dice Loss

Training a neural network for picking seismic phase arrivals has been commonly posed as a segmentation problem. It is a highly imbalanced segmentation problem in the sense that the background vastly dominates the foreground because we are trying to pick the optimal single sample point that represents the arrival of a seismic phase in a many seconds long time window. Here, we test the Dice loss, which is a preferred loss function for highly imbalanced image segmentation problems. We show that phase-picking neural networks trained on the Dice loss behave in a binary fashion for which the prediction output is almost always either nearly 1 or nearly 0. This feature removes the strong dependence of data processing workflows on the prediction score threshold, which is an otherwise critical parameter to determine when using neural networks trained on the cross-entropy loss. When strategically used, models trained on the Dice loss can reduce the parameter dependency of machine learning-based seismic monitoring.

58 GEOSCIENCES↗

Data processing in infrared astronomy

Infrared astronomy is often carried out with rocket probes or orbiting satellite telescopes in order to escape the effects of atmospheric absorption. The data returned from such missions is a highly abstracted digital representation of measurements made by analog detectors. The ability to extract infrared-emission information from these data streams depends on a thorough understanding of the information flow from the telescope aperture to the computer center. This paper reviews the primary elements of this end-to-end concept and the impact of each of these elements on the data processing algorithms, including the division between onboard and ground processing for scientific measurements.

Pelzmann, R. F., Jr.↗

Precise non-steady-state characterization of solid active materials with no preliminary mechanistic assumptions

This paper presents a straightforward and user-friendly procedure for extracting a reactivity characterization of catalytic reactions on solid materials under non-steady-state conditions, particularly in temporal analysis of products (TAP) experiments. The kinetic parameters derived by this procedure can help with the development of detailed mechanistic understanding. The procedure consists of the following two major steps: 1) Three “Laplace reactivities” are first determined based on the moments of the exit flow pulse response data; 2) Depending on a select kinetic model, kinetic constants of elementary reaction steps can then be expressed as a function of reactivities and determined accordingly. In particular, we distinguish two calculation methods based on the availability and reliability of reactant and product data. The theoretical results are illustrated using a reverse example with given parameters as well as an experimental example of CO oxidation over a supported Au/SiO 2 catalyst. The procedure presented here provides an efficient tool for kinetic characterization of many complex chemical reactions.

03 NATURAL GAS↗

Compression of contour data through exploiting curve-to-curve dependence

An approach to exploiting curve-to-curve dependencies in order to achieve high data compression is presented. One of the approaches to date of along curve compression through use of cubic spline approximation is taken and extended by investigating the additional compressibility achievable through curve-to-curve structure exploitation. One of the models under investigation is reported on.

Yalabik, N.↗

DESI 2024: reconstructing dark energy using crossing statistics with DESI DR1 BAO data

Here, we implement Crossing Statistics to reconstruct in a model-agnostic manner the expansion history of the universe and properties of dark energy, using DESI Data Release 1 (DR1) BAO data in combination with one of three different supernova compilations (PantheonPlus, Union3, and DES-SN5YR) and Planck CMB observations. Our results hint towards an evolving and emergent dark energy behaviour, with negligible presence of dark energy at z ≳ 1, at varying significance depending on data sets combined. In all these reconstructions, the cosmological constant lies outside the 95% confidence intervals for some redshift ranges. This dark energy behaviour, reconstructed using Crossing Statistics, is in agreement with results from the conventional w 0 –w a dark energy equation of state parametrization reported in the DESI Key cosmology paper. Our results add an extensive class of model-agnostic reconstructions with acceptable fits to the data, including models where cosmic acceleration slows down at low redshifts. We also report constraints on H 0 r d from our model-agnostic analysis, independent of the pre-recombination physics.

79 ASTRONOMY AND ASTROPHYSICS↗

Orbit-determination performance of Doppler data for interplanetary cruise trajectories. Part 2: 8.4-GHz performance and data-weighting strategies

A consider error covariance analysis was performed in order to investigate the orbit-determination performance attainable using two-way (coherent) 8.4-GHz (X-band) Doppler data for two segments of the planned Mars Observer trajectory. The analysis includes the effects of the current level of calibration errors in tropospheric delay, ionospheric delay, and station locations, with particular emphasis placed on assessing the performance of several candidate elevation-dependent data-weighting functions. One weighting function was found that yields good performance for a variety of tracking geometries. This weighting function is simple and robust; it reduces the danger of error that might exist if an analyst had to select one of several different weighting functions that are highly sensitive to the exact choice of parameters and to the tracking geometry. Orbit-determination accuracy improvements that may be obtained through the use of calibration data derived from Global Positioning System (GPS) satellites also were investigated, and can be as much as a factor of three in some components of the spacecraft state vector. Assuming that both station-location errors and troposphere calibration errors are reduced simultaneously, the recommended data-weighting function need not be changed when GPS calibrations are incorporated in the orbit-determination process.

Ulvestad, J. S.↗

DESI Data Release 2 ELGs: Property-dependent subsamples, imaging systematics, and clustering

Using emission-line galaxies (ELGs) from the Dark Energy Spectroscopic Instrument (DESI) Data Release 2, we evaluate a property-dependent correction to imaging systematics. We derive systematic weights following the same linear regression method used for other DESI tracers, but do so separately on ELG subsamples to provide a physically-informed alternative to the fiducial, neural-network-based approach. In doing so, we show that the deeper imaging in the Dark Energy Survey (DES) footprint leads to a higher overall number density but a lack of targets with extreme $g-r$ and $r-z$ colors. ELGs in the DES region also show a distinct redshift distribution when subsampled by position in the $g-r$ vs. $r-z$ plane. To address these effects, we implement a separate treatment of the DES footprint within the DESI catalog production pipeline, which is generally well-motivated and, in some cases, imperative for accurate clustering measurements. With DES treated separately, we find that property-dependent systematic weights further mitigate spurious clustering signal in $\sim$10% of subsamples, while the fiducial scheme remains optimal for the full sample.

Hagen, T. [Utah U.]↗

Light scalar WIMP through the Higgs portal and CoGeNT

If dark matter (DM) simply consists in a scalar particle interacting dominantly with the Higgs boson, the ratio of its annihilation cross section--which is relevant both for the relic abundance and indirect detection--and its spin-independent scattering cross section on nuclei depends only on the DM mass. It is an intriguing result that, fixing the mass and direct detection rate to fit the annual modulation observed by the DAMA experiment, one obtains a relic density in perfect agreement with its observed value. In this article we update this result and confront the model to the recent CoGeNT data, tentatively interpreting the excess of events in the recoil energy spectrum as being due to DM. CoGeNT, as DAMA, points toward a light DM candidate, with somewhat different (but not necessarily incompatible) masses and cross sections. For the CoGeNT region too, we find an intriguing agreement between the scalar DM relic density and direct detection constraints. We give the 1{sigma} region favored by the CDMS-II events, and our exclusion limits for the Xenon10 (2009) and Xenon100 data, which, depending on the scintillation efficiency, may exclude CoGeNT and DAMA. Assuming CoGeNT and/or DAMA to be due to scalar singlet DM leads to definite predictions regarding indirect detection and at colliders. We specifically emphasize the limit on the model that might be set by the current Fermi-LAT data on dwarf galaxies, and the implications for the search for the Higgs at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Soil moisture and evapotranspiration predictions using Skylab data

The author has identified the following significant results. Multispectral reflectance and emittance data from the Skylab workshop were evaluated for prediction of evapotranspiration and soil moisture for an irrigated region of southern Texas. Wavelengths greater than 2.1 microns were required to spectrally distinguish between wet and dry fallow surfaces. Thermal data provided a better estimate of soil moisture than did data from the reflective bands. Thermal data were dependent on soil moisture but not on the type of agricultural land use. The emittance map, when used in conjunction with existing models, did provide an estimate of evapotranspiration rates. Surveys of areas of high soil moisture can be accomplished with space altitude thermal data. Thermal data will provide a reliable input into irrigation scheduling.

Myers, V. I.↗