Search NASA⌕ Search

SEARCH · Search NASA

Results for “decelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

A numerical model of gravity wave breaking and stress in the mesosphere

The goal of the study is to calculate numerically the deceleration and heating caused by breaking gravity waves. The effect of the radiative dissipation of the wave is included as vertical-wavelength-dependent Newtonian cooling. The parameterization for zonal deceleration is extended by breaking gravity waves (Lindzen, 1981) to include the turbulent diffusion of heat and momentum. After describing the numerical model, the numerical results are presented and compared with the parameterizations in a noninteractive model of the mean zonal wind. Attention is then given to the transport of constituents by gravity waves and the attendant turbulent zone. It is noted that if gravity wave breaking were not an intermittent process, gravity wave stresses would produce an adiabatic mesosphere with a zonal mean velocity close to the phase speed of the breaking wave.

Schoeberl, M. R.↗

Characteristics of Distinctive Regions Comprising Stellar Atmospheres

Empirically identified atmospheric regions whose existence and properties generally have no classical-theoretical basis are discussed. The quasi-thermal photosphere, chromosphere, lower corona, upper corona, non-decelerated post corona, decelerated post corona, and the H sub alpha emission envelope are defined. The observational phenomena, thermodynamic mechanisms, and diagnostic aspects associated with each of the atmospheric layers are described.

Source record↗

Effects of aircraft and flight parameters on energy-efficient profile descents in time-based metered traffic

Concepts to save fuel while preserving airport capacity by combining time based metering with profile descent procedures were developed. A computer algorithm is developed to provide the flight crew with the information needed to fly from an entry fix to a metering fix and arrive there at a predetermined time, altitude, and airspeed. The flight from the metering fix to an aim point near the airport was calculated. The flight path is divided into several descent and deceleration segments. Descents are performed at constant Mach numbers or calibrated airspeed, whereas decelerations occur at constant altitude. The time and distance associated with each segment are calculated from point mass equations of motion for a clean configuration with idle thrust. Wind and nonstandard atmospheric properties have a large effect on the flight path. It is found that uncertainty in the descent Mach number has a large effect on the predicted flight time. Of the possible combinations of Mach number and calibrated airspeed for a descent, only small changes were observed in the fuel consumed.

Dejarnette, F. R.↗

Review of NASA ACLS research

An experimental investigation was conducted to evaluate a method of maintaining stability of an air cushion vehicle and also to evaluate several concepts to brake and steer an ACLS-equipped vehicle. The investigation used a modified airboat equipped with an air cushion landing system. The pressure relief door stability concept was characterized by the ACLS pressure time histories. The pressure relief doors vented excess cavity and lobe pressures and consistently maintained vehicle heave and pitch stability. Braking concepts were characterized by the average deceleration of the vehicle. Reduced lobe flow and cavity venting braking concepts were evaluated in this program. The cavity venting concept demonstrated the best performance, producing decelerations on the test vehicle on the same order as moderate braking with conventional wheel brakes. Steering concepts were evaluated by recording the path taken while attempting to follow a prescribed maneuver. The steering concepts evaluated included using rudders only, using differential lobe flow, and using rudders combined with a lightly loaded, nonsteering center wheel. The latter concept proved to be the most accurate means of steering the vehicle on the ACLS, producing translational deviations which, while two to three times higher than those from conventional nose gear steering, were still felt to provide reasonably precise steering control for this type vehicle.

Daugherty, R. H.↗

Titan atmospheric probe

Increased scientific interest in the structure and composition of Titan's atmosphere, clouds and surface have led to the study of mission options to the Saturnian system with the main goal of placing a probe into the atmosphere of the satellite. Two probe concepts have been studied by NASA: the first concept, a slightly modified Galileo probe capable of withstanding approximately 50 earth G during atmospheric entry heating and deceleration, would consist of a blunted 53 degree, 136-cm-diameter half-angle cone with a hemispherical afterbody, and a descent module containing scientific instruments and a parachute; the second concept, a system designed to provide in situ atmospheric measurements of Titan's organic haze layer, would consist of a probe using a 165-cm deployable graphite fabric decelerator, a 50-cm-diameter cylindrical descent module containing five instruments and a 2.5 m-diameter parachute and a 50-cm-radius spherical nose cap. Although the modified Galileo probe is feasible, its scientific drawback includes its inability to obtain in situ measurements above approximately 100 km.

Swenson, B. L.↗

A numerical study of diffusive shock acceleration of cosmic rays in supernova shocks

The evolution of the energy spectrum of cosmic rays accelerated by the first order Fermi mechanism, by a supernova remnant shock wave, including adiabatic deceleration effects behind the front, is carried out by means of a time-dependent numerical code. The calculations apply to the adiabatic stage (or Sedov stage) of the supernova explosion, and the energetic particle spectrum is calculated in the test particle limit (i.e., the back reaction of the cosmic rays on the flow is not included). The particles are injected mono-energetically at the shock. The radial distribution, The radial distribution, and the spectrum of the accelerated and decelerated particles is shown.

Ko, C. M.↗

Geodetic and geophysical results from Lageos

Seven years of laser tracking of the Lageos spacecraft have been used to derive geodetic quantities describing the earth and its rotational motion. The dynamical motions of the solid-earth on its axis have been derived continuously since launch and changes in the length-of-day show very high correlation with variations in the atmospheric zonal winds between 1000 and 50 mbars. A significant improvement in the determination of the product of the earth's mass and the gravitational constant has been made. The high accuracy of the orbit determination of Lageos over the 7 years since launch has permitted the identification of a small deceleration in the nodal precession of the orbit. This deceleration is being caused by a small reduction in the flattening of the earth arising from the rebound of the earth after the last ice age. Measurements of the distances between the tracking stations over several years are showing changes consistent with tectonic plate motion and with general ideas of vertical movements.

Smith, D. E.↗

The structure and characterization of air-assisted swirl atomizer sprays

The detailed aerodynamic structure of air-assisted swirl atomizer sprays is investigated in this paper. In contrast to previously published papers on spray characterization, special emphasis is placed on the region near the atomizer exit where significant variation of the mean drop size and drop velocity occurs. Simple correlations are found for the spray mean drop size and some initial input parameters. Measurements of drop acceleration and deceleration can be well related to the line-of-sight variations in mean drop size and number density. It is found that the initial drop acceleration and spray dispersion cause the initial decrease of axial mean drop diameters and subsequent drop deceleration causes the increase of mean drop diameters.

Mao, C.-P.↗

Accretion onto neutron stars with the presence of a double layer

It is known from laboratory experiments that double layers can form in plasmas, usually in the presence of an electric current. It is argued that a double layer may be present in the accretion column of a neutron star in a binary system. It is suggested that the double layer may be the predominant deceleration mechanism for the accreting ions, especially for sources with X-ray luminosities of less than about 10 to the 37th erg/s. Previous models have involved either a collisionless shock or an assumed gradual deceleration of the accreting ions to thermalize the energy of the infalling matter.

Williams, A. C.↗

Filament wound data base development, revision 1

The objective was to update the present Space Shuttle Solid Rocket Booster (SRB) baseline reentry aerodynamic data base and to develop a new reentry data base for the filament wound case SRB along with individual protuberance increments. Lockheed's procedures for performing these tasks are discussed. Free fall of the SRBs after separation from the Space Shuttle Launch Vehicle is completely uncontrolled. However, the SRBs must decelerate to a velocity and attitude that is suitable for parachute deployment. To determine the SRB reentry trajectory parameters, including the rate of deceleration and attitude history during free-fall, engineers at Marshall Space Flight Center are using a six-degree-of-freedom computer program to predict dynamic behavior. Static stability aerodynamic coefficients are part of the information required for input into this computer program. Lockheed analyzed the existing reentry aerodynamic data tape (Data Tape 5) for the current steel case SRB. This analysis resulted in the development of Data Tape 7.

Sharp, R. Scott↗

Accretion onto neutron stars with the presence of a double layer

It is known, from laboratory experiments, that double layers will form in plasmas, usually in the presence of an electric current. It is argued that a double layer may be present in the accretion column of a neutron star in a binary system. It is suggested that the double layer may be the predominant deceleration mechanism for the accreting ions, especially for sources with X-ray luminosities of less than about 10 to the 37th erg/s. Previous models have involved either a collisionless shock or an assumed gradual deceleration of the accreting ions to thermalize the energy of the infalling matter.

Williams, A. C.↗

A high flux source of swift oxygen atoms

A source of swift oxygen atoms is described which has several unique features. A high current ion beam is produced by a microwave discharge, accelerated to 10 keV and the mass selected by a modified Du Pont 21-110 mass spectrometer. The O(+) beam exciting the mass spectrometer is focused into a rectangular shape with an energy spread of less than 1 eV. The next section of the machine decelerates the ion beam into a counterpropagating electron beam in order to minimize space charge effects. After deceleration, the ion beam intersects at 90 deg, a neutral oxygen atom beam, which via resonant charge exchange produces a mixture of O(+) and O. Any remaining O(+) are swept out of the beam by an electric field and differentially pumped away while the desired O beam, collimated by slits, impinges on the target. In situ monitoring of the target surface is done by X-ray photoelectron or Auger spectroscopy. Faraday cups provide flux measurements in the ion sections while the neutral flux is determined by a special torsion balance or by a quadrupole mass spectrometer specially adapted for swift atoms. While the vacuum from the source through the mass spectrometer is maintained by diffusion pumps, the rest of the machine is UHV.

Fink, M.↗

Evolution of interstellar pickup ions in the solar wind

A model is constructed for the evolution of an interstellar pickup ion distribution in the solar wind. The model assumes that the ions are immediately isotropized at ionization and follows the subsequent development of the distribution function as the particles are convected with the solar wind. The effects of energy diffusion in an ambient wave field with a power law spectrum, adiabatic deceleration in the expanding solar wind, and continual addition of newly ionized particles are all included in the model. An analytical expression describing the evolution of the distribution function in phase space velocity and heliocentric radius is obtained. The distribution quickly approaches an asymptotic shape in phase space which depends on the relative efficiency of the energy diffusion process compared to that of adiabatic deceleration. At large distances from the sun the density of pickup ions falls as 1/r in this model. An expression for the distribution function at large distances and for large particle speed is presented. The asymptotic shape should describe the distribution of pickup ions in the outer heliosphere and could be used as an input distribution for a model of the anomalous component of heliosphere and could be used as an input distribution for a model of the anomalous component of cosmic rays. Comparison of this work with the recent observation of He(+) at 1 AU implies that the energy diffusion process is very weak inside 1 AU.

Isenberg, Philip A.↗

Atmospheric entry heating of cosmic dust

A computer simulation of the atmospheric entry deceleration and heating for micrometeorites into a planetary atmosphere was developed. The results of this model were compared to an earlier model. The major difference between the extent of heating experienced in the two models results from an underestimation of the atmospheric density at altitudes above 130 km in the earlier model. Thus the earlier model systematically overestimates the peak temperature reached on atmospheric entry. The discrepancies are small for near vertical entry and/or high density particles, where little deceleration is experienced at high altitudes. For particles entering at grazing incidence and/or of low density the discrepancies are more pronounced. Gravitational enhancement, which is a function of geocentric velocity at the collection opportunity, was found to bias near Earth cosmic dust collections in favor of low velocity particles. The effect is to increase the proportion of low velocity dust, predominately from asteroids, in the stratospheric cosmic dust collections and on Earth orbiting spacecraft impact surfaces over its proportion in the interplanetary dust cloud.

Flynn, George J.↗

Propagation of vortex rings and starting plumes in high and low g

The propagation of vortex rings and starting plumes during crystal growth in supercooled solutions was investigated in variable gravity environment created by acceleration-deceleration routine of a NASA's KC-135 flight. A specially designed crystal growth cell was used to study convection around crystals growing in supersaturated solutions of Na2SO4 and NaCl aboard the NASA KC-135. The results of vertical velocity measurements have shown that a continuously fed plume attains a higher velocity than the individual vortex ring. The results also indicated that the vortex ring decelerates as it propagates, and slows down much more rapidly than the starting plume, indicating a less efficient transport. It is suggested that inertial effects and buoyancy effects on vortex and plume propagation can be separated in the controlled environment of a Space Station borne centrifuge.

Hallett, J.↗

Neutral stellar winds that drive bipolar outflows in low-mass protostars

The Arecibo radio telescope at the 21-cm line of atomic hydrogen has been used to detect a neutral atomic wind in the bipolar flow source HH 7-11. An atomic mass of about 0.015 solar associated with the rapidly flowing gas is deduced. The stellar mass-loss rate is roughly 3 x 10 to the -6th solar mass/yr if the crossing time of the decelerating wind is 5000 yr. The excess emission in the H I line core gives a total duration of the outflow of about 70,000 yr. A detailed analysis of the H I line shape yields a reasonable deceleration rate for the atomic wind if the stellar wind continuously entrains ambient molecular gas as it propagates from the protostar. A stellar wind with the described characteristics and a terminal velocity of 170 km/s would be more than sufficient to drive the known extended CO bipolar outflow in HH 7-11.

Lizano, Susana↗

Model structure of a cosmic-ray mediated stellar or solar wind

An idealized hydrodynamic model is presented for the mediation of a free-streaming stellar wind by galactic cosmic rays or energetic particles accelerated at the stellar wind termination shock. The spherically-symmetric stellar wind is taken to be cold; the only body force is the cosmic ray pressure gradient. The cosmic rays are treated as a massless fluid with an effective mean diffusion coefficient k proportional to radial distance r. The structure of the governing equations is investigated both analytically and numerically. Solutions for a range of values of k are presented which describe the deceleration of the stellar wind and a transition to nearly incompressible flow and constant cosmic ray pressure at large r. In the limit of small k the transition steepens to a strong stellar wind termination shock. For large k the stellar wind is decelerated gradually with no shock transition. It is argued that the solutions provide a simple model for the mediation of the solar wind by interstellar ions as both pickup ions and the cosmic ray anomalous component which together dominate the pressure of the solar wind at large r.

Lee, M. A.↗

The use of atmospheric braking during Mars missions

The use of a high-lift, winged atmospheric entry-glide vehicle by an early Mars manned mission lasting 14-16 months allows the effective use of atmospheric braking to decelerate upon arrival at Mars. Following nearly-constant deceleration, the vehicle skips out of the atmosphere into a low planetary orbit. The maximum atmospheric heating rate thus generated is of the order of 100 W/sq cm at the stagnation point for a fully catalytic surface; the corresponding equilibrium wall temperature was 2150 K. The vehicle envisioned could be radiatively cooled to an entry speed of over 8 km/sec.

Tauber, M. E.↗