Search NASA⌕ Search

SEARCH · Search NASA

Results for “deformation function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Rotational excitations in rare-earth nuclei: A comparative study within three cranking models with different mean fields and treatments of pairing correlations

High-spin rotational bands in rare-earth Er (Z = 68), Tm (Z = 69), and Yb (Z = 70) isotopes are investigated by three different nuclear models. These are (i) the cranked relativistic Hartree-Bogoliubov (CRHB) approach with approximate particle number projection by means of the Lipkin-Nogami (LN) method, (ii) the cranking covariant density functional theory (CDFT) with pairing correlations treated by a shell-model-like approach (SLAP) or the so-called particle-number conserving (PNC) method, and (iii) cranked shell model (CSM) based on the Nilsson potential with pairing correlations treated by the PNC method. A detailed comparison between these three models in the description of the ground-state rotational bands of even-even Er and Yb isotopes is performed. The similarities and differences between these models in the description of the moments of inertia, the features of band crossings, and equilibrium deformations and pairing energies of the even-even nuclei under study are discussed. These quantities are considered as a function of rotational frequency and proton and neutron numbers. The changes in the properties of the first band crossings with increasing neutron number in this mass region are investigated. On average, a comparable accuracy of the description of available experimental data is achieved in these models. However, the differences between model predictions become larger above the first band crossings. Because of the time-consuming nature of numerical calculations in the CDFT-based models, a systematic study of the rotational properties of both ground-state and excited-state bands in odd-mass Tm nuclei is carried out only by the PNC-SCM. With few exceptions, the rotational properties of experimental 1-quasiparticle and 3-quasiparticle bands in 165,167,169,171 Tm are reproduced reasonably well. As a result, the appearance of backbendings or upbendings in these nuclei is well understood from the analysis of the variations of the occupation probabilities of the single-particle states and their contributions to total angular momentum alignment with rotational frequency.

150 ≤ A ≤ 189↗
NASA NTRS1985

Bounding solutions of geometrically nonlinear viscoelastic problems

Integral transform techniques, such as the Laplace transform, provide simple and direct methods for solving viscoelastic problems formulated within a context of linear material response and using linear measures for deformation. Application of the transform operator reduces the governing linear integro-differential equations to a set of algebraic relations between the transforms of the unknown functions, the viscoelastic operators, and the initial and boundary conditions. Inversion either directly or through the use of the appropriate convolution theorem, provides the time domain response once the unknown functions have been expressed in terms of sums, products or ratios of known transforms. When exact inversion is not possible approximate techniques may provide accurate results. The overall problem becomes substantially more complex when nonlinear effects must be included. Situations where a linear material constitutive law can still be productively employed but where the magnitude of the resulting time dependent deformations warrants the use of a nonlinear kinematic analysis are considered. The governing equations will be nonlinear integro-differential equations for this class of problems. Thus traditional as well as approximate techniques, such as cited above, cannot be employed since the transform of a nonlinear function is not explicitly expressible.

Stubstad, J. M.↗
NASA NTRS1986

Bounding solutions of geometrically nonlinear viscoelastic problems

Integral transform techniques, such as the Laplace transform, provide simple and direct methods for solving viscoelastic problems formulated within a context of linear material response and using linear measures for deformation. Application of the transform operator reduces the governing linear integro-differential equations to a set of algebraic relations between the transforms of the unknown functions, the viscoelastic operators, and the initial and boundary conditions. Inversion either directly or through the use of the appropriate convolution theorem, provides the time domain response once the unknown functions have been expressed in terms of sums, products or ratios of known transforms. When exact inversion is not possible approximate techniques may provide accurate results. The overall problem becomes substantially more complex when nonlinear effects must be included. Situations where a linear material constitutive law can still be productively employed but where the magnitude of the resulting time dependent deformations warrants the use of a nonlinear kinematic analysis are considered. The governing equations will be nonlinear integro-differential equations for this class of problems. Thus traditional as well as approximate techniques, such as cited above, cannot be employed since the transform of a nonlinear function is not explicitly expressible.

Stubstad, J. M.↗
NASA NTRS1987

Yielding and deformation behavior of the single crystal superalloy PWA 1480

Interrupted tensile tests were conducted to fixed plastic strain levels in 100 ordered single crystals of the nickel based superalloy PWA 1480. Testing was done in the range of 20 to 1093 C, at strain rate of 0.5 and 50 percent/min. The yield strength was constant from 20 to 760 C, above which the strength dropped rapidly and became a strong function of strain rate. The high temperature data were represented very well by an Arrhenius type equation, which resulted in three distinct temperature regimes. The deformation substructures were grouped in the same three regimes, indicating that there was a fundamental relationship between the deformation mechanisms and activation energies. Models of the yielding process were considered, and it was found that no currently available model was fully applicable to this alloy. It was also demonstrated that the initial deformation mechanism (during yielding) was frequently different from that which would be inferred by examining specimens which were tested to failure.

Milligan, Walter W.↗
DOE OSTI2022

Probing Optimal Reaction Energy for Synthesis of Element 119 from 51 V+ 248 Cm Reaction with Quasielastic Barrier Distribution Measurement

Here, the quasielastic barrier distribution of 51 V+ 248 Cm was extracted by measuring the excitation function of quasielastic backscattering using a gas-filled recoil ion separator, GARIS-III. The obtained barrier distribution is well explained by the coupled-channels calculation, indicating a significant effect of the rotational excitation of deformed 248 Cm. From the measured average Coulomb barrier height and deformation parameters of 248 Cm, the side-collision energy leading to a compact configuration of colliding nuclei was obtained. The relation between the side collision energy and the excitation function of the evaporation-residue cross sections in the 48 Ca+ 248 Cm system was evaluated as a reference for the 51 V+ 248 Cm case. The optimal reaction energy to synthesize a new element 119 at the 51 V+ 248 Cm fusion reaction (3n and 4n channels) was estimated with an aid of these experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1998

HOTCFGM-1D: A Coupled Higher-Order Theory for Cylindrical Structural Components with Through-Thickness Functionally Graded Microstructures

The objective of this three-year project was to develop and deliver to NASA Lewis one-dimensional and two-dimensional higher-order theories, and related computer codes, for the analysis, optimization and design of cylindrical functionally graded materials/structural components for use in advanced aircraft engines (e.g., combustor linings, rotor disks, heat shields, blisk blades). To satisfy this objective, a quasi one-dimensional version of the higher-order theory, HOTCFGM-1D, and four computer codes based on this theory, for the analysis, design and optimization of cylindrical structural components functionally graded in the radial direction were developed. The theory is applicable to thin multi-phased composite shell/cylinders subjected to macroscopically axisymmetric thermomechanical and inertial loading applied uniformly along the axial direction such that the overall deformation is characterized by a constant average axial strain. The reinforcement phases are uniformly distributed in the axial and circumferential directions, and arbitrarily distributed in the radial direction, thereby allowing functional grading of the internal reinforcement in this direction.

Pindera, Marek-Jerzy↗
DOE OSTI2025

Atomic Energy Accuracy of Neural Network Potentials: Harnessing Pretraining and Transfer Learning

Machine learning-based interatomic potentials (MLIPs) have transformed the prediction of potential energy surfaces (PESs), achieving accuracy comparable to ab initio calculations. However, atomic energy predictions, often assumed to lack physical meaning, remain underexplored. In this study, we demonstrate that inaccuracies in atomic energy predictions reduce the robustness and transferability of Neural Network Potentials (NNPs) and atomic energy error can be masked in total energy predictions due to error cancellation. Here, we validate this finding using challenging configurations involving deformation and failure under tensile loading. By pretraining atomic energy predictions using empirical potentials and applying transfer learning with density functional theory (DFT) data, we achieve notable improvements in the accuracy of total energy, forces, and stress predictions. Furthermore, this approach enhances the robustness and transferability of NNPs, emphasizing the importance of atomic energy predictions in developing high-quality and reliable MLIPs.

Active Learning↗
DOE OSTI2025

Origin of the Low-Energy Enhancement of the γ-Ray Strength Function

The low-energy enhancement (LEE) in γ-ray strength functions has been experimentally identified in a large number of nuclei during the past two decades; however, the origin of the enhancement is not fully understood. Building on previous theoretical work, we investigate the LEE and its relation to the scissors mode (SM) with an independent theoretical approach. We apply a novel angular-momentum-projected shell-model method that explicitly endows degrees of freedom to describe the scissors motion. Taking the recently measured γ-ray strength functions in Neodymium isotopes as examples, we find that the LEE arises from a quasi-free scissors motion appearing only in weakly-deformed nuclei, which can be viewed as an approximate free-rotation of neutrons with respect to protons. This leads us to propose a new type of collective motion, scissors rotation, to contrast the scissors vibration widely known in well-deformed nuclei. The observed LEE is naturally interpreted as the first evidence for this collective excitation mode.

Collective models↗
NASA NTRS1986

Yielding and deformation behavior of the single crystal nickel-base superalloy PWA 1480

Interrupted tensile tests were conducted to fixed plastic strain levels in 100 ordered single crystals of the nickel based superalloy PWA 1480. Testing was done in the range of 20 to 1093 C, at strain rate of 0.5 and 50%/min. The yield strength was constant from 20 to 760 C, above which the strength dropped rapidly and became a stong function of strain rate. The high temperature data were represented very well by an Arrhenius type equation, which resulted in three distinct temperature regimes. The deformation substructures were grouped in the same three regimes, indicating that there was a fundamental relationship between the deformation mechanisms and activation energies. Models of the yielding process were considered, and it was found that no currently available model was fully applicable to this alloy. It was also demonstrated that the initial deformation mechanism (during yielding) was frequently different from that which would be inferred by examining specimens which were tested to failure.

Milligan, W. W., Jr.↗
DOE OSTI2019

Influence of the Guinier–Preston Zones on the Concentration Dependence of the Yield Point of the Aged Two-Component Alloys in Conditions of High-Speed Deformation

The glide of an ensemble of edge dislocations at the high-speed deformation of an aged binary metal alloy is theoretically analyzed. The yield stress of the alloy is a nonmonotone function of the second component concentration, which has a maximum and a minimum under certain conditions. The maximum corresponds to the transfer from the dominating influence of dislocation collective interaction on creation of a spectral gap to the prevalence of the influence of collective interaction of atoms of the second component. The minimum of the obtained curve corresponds to the transfer from the prevalence of the drag of the dislocation by the Guinier–Preston zones to the prevalence of its drag by the atoms of the second component.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Mass transport in a highly immiscible alloy on extended shear deformation

Forced mixing to a single phase or supersaturated solid solution (SSS) and its prerequisite microstructure evolution in immiscible systems has been a focus of research for both fundamental science and a variety of applications. Controlling the formation of SSS by shear deformation assisted processing could enable a material design beyond conventional equilibrium microstructure in immiscible systems. Here, a highly immiscible (mixing enthalpy of ~ 20 kJ·mol -1 ) Cu-50 at. % Cr binary alloy was employed to investigate the microstructure evolution and localized tendencies of SSS during severe shear deformation. The present results demonstrate distinctive microstructure refinement process in each phase and how they lead to localized SSS as a function of shear strain. Preferential dynamic recrystallization occurs in the softer Cu phase due to strain localization, leading to substantial grain refinement. The refinement of Cr phase in the top-most layer, however, is enabled by the progressive evolution of grain lamination, splitting, and fragmentation as a function of shear strain. The eventual SSS is found to be strongly dependent on the local environments that affect the dislocation activity, including the level of microstructure refinement, the interfacial orientation relationship, hardness difference, and supposed stability of oxidation. Ab initio simulations comfirm that it is more favorable to oxidize Cr than Cu at incoherent Cu/Cr interfaces which then limits the mass transport on an incoherent boundary. Our results shed light on the underpinning mechanism for non-equilibrium mass transport in immiscible systems upon severe deformation that can be applicable to a variety of processing techniques aimed at producing immiscible alloys with superior mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomistic simulations of He bubbles in Beryllium

Formation of He bubbles can have a significant effect on the microstructural evolution and properties of irradiated materials. In this report, we use atomistic simulations based on machine learning potentials to investigate the fundamental behavior of He bubbles in Be, with a specific focus on the shape, stability, and diffusivity of bubbles. Stability of He bubbles is quantified in terms of formation energies, which are determined as a function of the ratio of He/V. We find that He bubbles become unstable with respect to plastic deformation through punch-out dislocations around the bubble when the He/V ratio is larger than ~1.25, and the punch-out process induces the change of the regular bubble shape. In general, the bubble shape of He in Be is found to be ellipsoid-like. It is also found that for a fixed He/V ratio, the bubble attracts vacancies to become larger in size. If the bubble size is constant, the bubble attracts additional He atoms until the punch-out reaction occurs. The dominant diffusion mechanism of He bubbles changes from surface diffusion to volume diffusion as the temperature is increased, with a crossover occurring at about 900 K.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Electric fields near undulating dielectric membranes

Dielectric interfaces are crucial to the behavior of charged membranes, from graphene to synthetic and biological lipid bilayers. Understanding electrolyte behavior near these interfaces remains a challenge, especially in the case of rough dielectric surfaces. A lack of analytical solutions consigns this problem to numerical treatments. Here, we report an analytic method for determining electrostatic potentials near curved dielectric membranes in a two-dimensional periodic “slab” geometry using a periodic summation of Green’s functions. This method is amenable to simulating arbitrary groups of charges near surfaces with two-dimensional deformations. We concentrate on one-dimensional undulations. We show that increasing membrane undulation increases the asymmetry of interfacial charge distributions due to preferential ionic repulsion from troughs. In the limit of thick membranes, we recover results mimicking those for electrolytes near a single interface. Our work demonstrates that rough surfaces generate charge patterns in electrolytes of charged molecules or mixed-valence ions.

Chemistry↗
DOE OSTI2022

A perturbative CFT dual for pure NS–NS AdS 3 strings

We construct a conformal field theory dual to string theory on AdS 3 with pure NS–NS flux. It is given by a symmetric orbifold of a linear dilaton theory deformed by a marginal operator from the twist-2 sector. We compute two- and three-point functions on the CFT side to 4th order in conformal perturbation theory at large N. They agree with the string computation at genus 0, thus providing ample evidence for a duality. We also show that the full spectra of both short and long strings on the CFT and the string side match. Furthermore, the duality should be understood as perturbative in N –1 .

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Response of the mode Grüneisen parameters with anisotropic compression: A pressure and temperature dependent Raman study of β-Sn

The lattice dynamic response of body-centered tetragonal beta-Sn (I4 1 /amd) under high-pressure and temperature conditions is determined using experimental optical vibration modes. Here, Raman scattering is used to map the phase stability region of beta-Sn to perform mode Gruneisen analysis, and we demonstrate the necessity of an optical intensity calibration for Raman thermometry. The Gruneisen tensor is evaluated along a set of isotherms to address shortcomings of single-mode Gruneisen parameters with respect to anisotropic deformations of this tetragonal structured soft metal. The changes observed here in the Gruneisen tensor as a function of temperature are related to anharmonicity and denote potential criteria for the onset of premelting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Investigating the Dynamic Compaction Behavior of Brittle Powders

The compression of porous materials to full density is a complex physical and mechanical process. Modeling efforts to capture the compaction behavior of distended solids (e.g., porous materials or powders) have produced a variety of compaction models, each functionalized to address specific compaction mechanisms. Of the available models, those suited for high-strain-rate deformation associated with shock loading have generally been developed for ductile materials. Compaction models for brittle materials have only been developed for quasistatic loading conditions. No predictive models currently exist that successfully capture the physical processes and mechanics for shock compaction of brittle distended materials, such as sand and oxide powders. The primary hindrance in producing a dynamic compaction model for brittle distended materials is the lack of availability of high-fidelity, high-precision shock compaction data for validation. The proposed work is aimed at alleviating this issue by developing a high-precision testing method in combination with high-fidelity analysis methods to accurately and precisely determine the shocked state of an ideal test material, ceria powder, under uniaxial strain dynamic compaction. The measured shock compaction data from these brittle powder experiments is then used in initial computations to design a cylindrically converging shock compaction experiment within situ time-resolved shocked density measurements, employing proton radiography. The preliminary experimental and computational results obtained from these uniaxial strain dynamic compaction and cylindrically converging shock compaction experiments are presented. An experimental and computational path forwards to predictive model development is then proposed.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Edge softening of the Shuttle TPS strain isolation pad

Tensile tests and an analytical investigation were performed to characterize the edge softening behavior of the strain isolation pad (SIP) between the Orbiter skin and thermal protection system. The tensile tests were carried out with varying sizes of disk-shaped specimens bonded between aluminum disks. The specimens strength and stiffness were determined on the basis of specimen size, and an analytical model of the microstructural stress-strain characteristics was developed. Strength and stiffness were found to decrease near the free edges because through-the-thickness fibers located there were not anchored. No size dependence at maximum load was observed in specimens between 0.75-4.0 in. thick. In-plane and out-of-plane coupling in deformation was detected. The model gave accurate predictions of the tensile behavior of the SIP as a function of distance to a free edge.

Ransone, P. O.↗
NASA NTRS1987

Approximate Feedback Control for a System With Memory

Report presents algorithm for calculating feedback gain for control of hereditary dynamical systems with control delay. Problem is to approximate optimal feedback gain that minimizes cost function of state and control. Theory applicable to design of controllers for mechanical systems subject to thermal deformation, electrical systems with delay, electrical systems with plasma components, and other systems that exhibit memory.

Milman, Mark H.↗