Search NASA⌕ Search

SEARCH · Search NASA

Results for “disordered solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Probing degradation at solid-state battery interfaces using machine-learning interatomic potential

Solid-state batteries featuring fast ion-conducting solid electrolytes are promising next-generation energy storage technologies, yet challenges remain for practical deployment due to electro-chemo-mechanical instabilities at solid-solid interfaces. These interfaces, which include homogeneous/internal interfaces such as grain boundaries (GBs) and heterogeneous/external interfaces between solid-electrolyte and electrode materials, can impede Li-ion transport, deteriorate performance, and eventually lead to cell failure. Here, in this study, we leverage large-scale molecular simulations, enabled by validated machine-learning interatomic potentials, to directly probe the onset of interfacial degradation at the garnet Li 7 La 3 Zr 2 O 12 (LLZO) solid-electrolyte/LiCoO 2 (LCO) cathode interface. By surveying different interfacial geometries and compositions, it is found that Li-deficient interfaces can lead to severe interfacial disordering with cation mixing and Co interdiffusion from LCO into LLZO. By contrast, Li-sufficient interfaces are less disordered, although elemental segregation with local ordering is observed. As a consequence of Co interdiffusion, Co-rich regions are formed at the GBs of LLZO due to cation segregation and trapping effects. This behavior is independent of the GB tilting axis, degree of disorder at the GBs, and Co concentration, which implies Co clustering at GBs is a general phenomenon in polycrystalline LLZO and can dictate its overall transport and mechanical properties. Our findings elucidate the underlying fundamental mechanisms that give rise to experimentally observed physicochemical properties and provide guidelines for interface design that can mitigate interfacial degradation and improve cycling performance.

25 ENERGY STORAGE↗

Model for the Solid–Liquid Interfacial Free Energy at High Pressures

The free energy involved in the formation of an interface between two phases (e.g., a solid–liquid interface) is referred to as the interfacial free energy. For the case of solidification, the interfacial free energy dictates the height of the energy barrier required to nucleate stable clusters of the newly forming solid phase and is essential for producing an accurate solidification kinetics model using classical nucleation theory (CNT)-based methods. While various methods have been proposed for modeling the interfacial free energy for solid–liquid interfaces in prior literature, many of these formulations involve making restrictive assumptions or approximations, such as the system being at or near equilibrium (i.e., the system temperature is approximately equal to the melt temperature) or that the system is at pressures close to atmospheric. However, these approximations and assumptions may break down in highly non-equilibrium situations, such as in dynamic-compression experiments where metastable liquids that are undercooled by hundreds of kelvin or over-pressurized by several gigapascals or more are formed before eventually solidifying. We derive a solid–liquid interfacial free-energy model for such high-pressure conditions by considering the enthalpies of interactions between pairs of atoms or molecules. We also consider the contribution of interface roughness (disordering) by incorporating a multilayer interface model known as the Temkin n-layer model. Our formulation is applicable to a diverse variety of materials, and we demonstrate it by developing models specifically for two different materials: water and gallium. We apply our interfacial free-energy formulation to CNT-based kinetics simulations of several suites of dynamic-compression experiments that cause liquid water to solidify to the high-pressure solid polymorph ice VII and have found good agreement to the observed kinetics with only minor empirical fitting.

36 MATERIALS SCIENCE↗

Synthesis, physicochemical characterization and crystallographic twinning of Li{sub 2}ZnSnS{sub 4}

Li{sub 2}ZnSnS{sub 4} is a new diamond-like semiconductor, which is of interest as a host structure for the creation of potentially interesting electronic, magnetic and photovoltaic materials. The compound was synthesized via traditional high-temperature solid-state methods and was predicted to adopt a wurtz-stannite structure with all atoms possessing tetrahedral environments. Initial analysis of single-crystal X-ray diffraction data indicated crystallographic disorder that upon closer examination violated basic chemical principles. The structure was subsequently re-evaluated and the apparent 'disorder' problem was found to be the result of pseudo-merohedral twinning. The crystal structure was finally solved in the monoclinic space group Pn, which resulted in a chemically reasonable model. The refinement converged with R1=1.68% (for all data). Additional characterization of the sample, including diffuse reflectance, thermal analysis and second harmonic generation measurements, was also performed. - Abstract: Li{sub 2}ZnSnS{sub 4} is a new diamond-like semiconductor synthesized via high-temperature solid-state methods. Analysis of single-crystal X-ray diffraction data indicated that the structure was a pseudo-merohedral twin crystallizing in space group Pn and related to the wurtz-stannite structure. Additional characterization of the sample is reported. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relationship between ferroelectric properties and local structure of Pb{sub 1−x}Ba{sub x}Zr{sub 0.40}Ti{sub 0.60}O{sub 3} ceramic materials studied by X-ray absorption and Raman spectroscopies

This paper reports on the structural characterization of Pb{sub 1−x}Ba{sub x}Zr{sub 0.40}Ti{sub 0.60}O{sub 3} (PBZT) ferroelectric ceramic compositions prepared by the conventional solid state reaction method. X-ray absorption spectroscopy (XAS) and Raman spectroscopy were used in the probing of the local structure of PBZT samples that exhibit a normal or relaxor ferroelectric behavior. They showed a considerable local disorder around Zr and Pb atoms in the samples of tetragonal or cubic long-range order symmetry. The intensity of the E(TO{sub 3}) mode in the Raman spectra of PBZT relaxor samples remains constant at temperatures lower than T{sub m}, which has proven the stabilization of the correlation process between nanodomains. - Graphical abstract: X-ray absorption measurements showed considerable local disorder around Zr and Pb atoms in the samples of tetragonal or cubic long-range order symmetry. The intensity of the E(TO{sub 3}) mode in the Raman spectra of PBZT relaxor samples remains constant at temperatures lower than T{sub m}, which has proven the stabilization of the correlation process between nanodomains. Display Omitted - Highlights: • Structural characterization of Pb{sub 1−x}Ba{sub x}Zr{sub 0.40}Ti{sub 0.60}O{sub 3} (PBZT) ferroelectric ceramic. • X-ray absorption and Raman spectroscopies were used to probe the structure of PBZT. • Dissymmetry of Zr and Pb sites was observed in samples long-range cubic symmetry. • Local disorder in all PBZT samples through the observation of Raman active modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Gold Hydride at High Pressure and High Temperature

Gold is an unreactive metal and its chemical interactions with hydrogen have only recently been explored. Here, in this study, we report the formation of gold hydride above 40 GPa and 2200 K in X-ray free electron laser heated diamond anvil cells using various hydrocarbons as hydrogen sources. Above 40 GPa, a hexagonal phase emerges close to the gold melting point, corresponding to a hydride with stoichiometry Au 2 H x , with x increasing from 0 to near 1 with pressure from 40 to 80 GPa. This is a high-temperature phase which reverts to face centered cubic gold on cooling to 295 K. Accompanying DFT-MD simulations are in excellent agreement with experiment and reveal the structure to consist of an hexagonal close packed gold lattice with atomic hydrogen disordered in the interstices. The hydrogen is superionic and exhibits high diffusivity through the crystalline gold lattice. Our results present the first solid-state binary compound of gold and hydrogen.

Ab initio calculations↗

Structural and magnetic study of RFe{<_0.5}V{<_0.5}O{<_3} (R = Y, Eu, Nd, La) perovskite compounds.

B-site disordered RFe{sub 0.5}V{sub 0.5}O{sub 3} compounds, with R=La, Nd, Eu and Y, have been prepared by solid-state reaction technique and their structures and magnetic properties have been investigated through X-ray powder diffraction, time-of-flight neutron powder diffraction and magnetization measurements at temperatures ranging from 5 to 700 K. The four compounds can be described as distorted perovskites with space group symmetry Pbnm and a{sup +}b{sup -}b{sup -} tilt system. The studied compounds also show antiferromagnetic ordering with Neel temperatures of 299, 304, 304, and 335 K respectively. The magnetic structures of R=La, Nd and Y compounds were determined from the neutron powder diffraction as Gz with observed magnetic moments of 2.55, 2.54 and 2.69 {mu}{sub B} at 30, 40 and 40 K, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure and atomic level complexity in Al 0.5 TiZrPdCuNi high-entropy alloy in glass phase

We present that high entropy alloys (HEAs), or concentrated solid solution alloys, are chemically complex metallic solid solutions in which five or more elements occupy the same crystallographic lattice sites with nearly equal compositions. The high degree of chemical disorder gives rise to considerable local lattice distortions, atomic-level stresses, and complex electronic structure, resulting in interesting properties. We calculated the electronic structure and the atomic-level stresses of Al x Ti y Zr y Pd y Cu y Ni y , x = 0.5, y = 1 (Al 0.5 TiZrPdCuNi) HEA in the glassy phase using the density functional theory (DFT) approach. We also briefly discuss the electronic structure in its crystalline phase. Whereas it has been reported recently that the crystalline phase of this HEA is obtained as a metastable phase during the crystallization of a glassy phase, the crystalline phase was found to be unstable at T = 0 in the DFT calculation. For this reason, we focus mainly on the glassy phase in this work. Lastly, the importance of charge transfer among elements on the atomic-level pressure and the role for atomic-level stresses to characterize the electronic and structural heterogeneity are discussed.

36 MATERIALS SCIENCE↗

Orientational Disorder of NH3 in Hexammine Magnesium Borohydride

Hexammine magnesium borohydride, Mg(NH3)6(BH4)2, consists of adducted NH3 molecules locked in a matrix of Mg cations and borohydride anions. It is a candidate material for hydrogen storage, with 16.8 wt % hydrogen stored in both the NH3 and borohydride anions. It may also be of interest as an Mg2+-conducting electrolyte in solid-state batteries. Its crystal structure has, until now, eluded a proper structural solution due to ambiguity regarding the NH3 position and behavior. In this work, we show using synchrotron X-ray diffraction that the room-temperature structure can be solved only with a model assuming the orientational disorder of ammonia molecules within the crystal structure. Cooling the sample to 120 K yields additional Bragg peaks, which can be solved only with a unit cell expansion consistent with the freezing of the orientational freedom of ammonia molecules. Using this insight from the structure solution, we performed a full assignment of the vibrational modes in the room-temperature infrared spectrum.

08 HYDROGEN↗

Multisublattice cluster expansion study of short-range ordering in iron-substituted strontium titanate

Owing to the challenges in obtaining realistic atomic configurations in large chemical phase spaces, it is not straightforward to describe structure–property relations in materials exhibiting configurational disorder. One example is iron-substituted strontium titanate (SrTi 1–x Fe x O 3–d , STF), a promising perovskite-derivative cathode material in solid oxide fuel cells that exhibits full solid solubility 0 ≤ x ≤ 1 and a tendency to exhibit short-range order. Here we demonstrate a multisublattice cluster expansion (CE) framework and apply it to STF across the full composition range. The CE approach is distinct from more traditional CE formulations in that clusters are defined explicitly by the chemical species distributed among multiple sublattices, rather than via cluster functions of occupation variables with decoration. The modified CE approach makes it easy to distinguish meaningful chemical interactions that are harder to extract from conventional CE, since for the latter chemical identity in a cluster is expressed as a product of site occupations. The least absolute shrinkage and selection operator (LASSO) is implemented as a regression analysis tool to select key clusters and avoid overfitting. We demonstrate this formulation on STF, and show that it can accurately predict configurational energies in comparison to conventional CE. From the key clusters, we identify that short-range ordering between substitutional Fe and oxygen vacancies (V O ) results in the formation of Fe–VO strings. In addition, we consider the stability of STF through CE-based Monte Carlo (MC) simulations and confirm the presence of superstructures that were previously observed in transmission electron microscopy. In this work, analysis of atomic configurations from MC samples reveals variations in the oxidation state of Fe atoms, which can be explained by the ordering tendency of Fe and V O . The cluster description and selection formalism described here may be applied to other disordered multisublattice systems for accurate and efficient material modeling.

36 MATERIALS SCIENCE↗

Sr 2 Fe 1.5 Mo 0.5 O 6-δ as a regenerative anode for solid oxide fuel cells

Sr 2 Fe 1.5 Mo 0.5 O 6-δ (SFM) was prepared using a microwave-assisted combustion synthesis method. Rietveld refinement of powder X-ray diffraction data reveals that SFM crystallizes in the simple cubic perovskite structure with iron and molybdenum disordered on the B-site. No structure transition was observed by variable temperature powder X-ray diffraction measurements in the temperature range of 25–800 °C. XPS results show that the iron and molybdenum valences change with an increase in temperature, where the mixed oxidation states of both iron and molybdenum are believed to be responsible for the increase in the electrical conductivity with increasing temperature. SFM exhibits excellent redox stability and has been used as both anode and cathode for solid oxide fuel cells. Presence of sulfur species in the fuel or direct utilization of hydrocarbon fuel can result in loss of activity, however, as shown in this paper, the anode performance can be regenerated from sulfur poisoning or coking by treating the anode in an oxidizing atmosphere. Thus, SFM can be used as a regenerating anode for direct oxidation of sulfur-containing hydrocarbon fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alpha self-irradiation effect on the local structure of the U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} solid solution

Uranium-americium mixed oxides are promising fuels for achieving an efficient Am recycling. Previous studies on U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} materials showed that the high {alpha} activity of {sup 241}Am induces pellet swelling which is a major issue for cladding materials design. In this context, X-ray Diffraction and X-ray Absorption Spectroscopy measurements were used to study self-irradiation effects on U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} local structure and to correlate these results with those obtained at the macroscopic scale. For a cumulative {alpha} decay dose equal to 0.28 dpa, it was shown that non-defective fluorite solid solutions were achieved and therefore, that the fluorite structure is stable for the studied doses. In addition, both interatomic distance and lattice parameter expansions were observed, which only partially explains the macroscopic swelling. As expected, an increase of the structural disorder with self-irradiation was also observed. - Graphical abstract: X-ray Diffraction and X-ray Absorption Spectroscopy measurements were performed on U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x}, exhibiting various cumulative {alpha} decay doses, in order to study self-irradiation effects on local structure and to correlate these results with those obtained at the macroscopic scale. Thus, it was shown that the fluorite structure is stable for the studied doses. In addition, both interatomic distance and lattice parameter expansions were observed, explaining partially the macroscopic swelling. Highlights: Black-Right-Pointing-Pointer Non-defective fluorite U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} solid solutions were achieved. Black-Right-Pointing-Pointer The fluorite structure is stable for the studied doses. Black-Right-Pointing-Pointer A lattice parameter increase was observed, which partially explains the macroscopic swelling. Black-Right-Pointing-Pointer The increase of the structural disorder can be understood from the ballistic effect associated to the Am high alpha activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comprehensive survey of Nd{sup 3+} substitution In La{sub 2}Mo{sub 2}O{sub 9} oxide-ion conductor

Differential thermal analysis coupled to temperature-controlled diffraction have given evidence of a topological metastability phenomenon in an extended compositional range of the La{sub 2-x}Nd{sub x}Mo{sub 2}O{sub 9} solid solution. A metastable-stable phase diagram is proposed for this series of LAMOX-type fast oxide-ion conductors. In the Nd range 0<x<=0.35, a freezing of the oxygen/vacancy disorder of the beta-phase at ambient temperature can be achieved through a splat-quenching to water-ice mixture or/and shaping/sintering into pellet. In the intermediate 0.4<=x<=1.2 range, the amount of beta-metastable phase grows upon substitution for powders. The negative impact of beta-metastable to alpha phase transition on conductivity tends to disappear through the partial stabilization of the beta phase by shaping/sintering. - Graphical abstract: Metastable-stable phase diagram of the solid solution La{sub 2-x}Nd{sub x}Mo{sub 2}O{sub 9} determined from DTA. The topological metastability of the high-temperature cubic beta-form which goes back to monoclinic stable alpha-form above 450-500 deg. C is shown in the intermediate range 0.4<=x<=1.2. Above x=1.2, this transition progressively changes into a thermal trace of the postulated Arrhenius/VTF transformation of transport mechanism.

36 MATERIALS SCIENCE↗

High temperature thermoelectric properties of the solid-solution zintl phase Eu₁₁Cd 6-x Zn x Sb₁₂

Solid-solution Zintl compounds with the formulaEu₁₁Cd 6-x Zn x Sb₁₂ have been synthesized from the elements as single crystals using a tin flux according to the stoichiometry Eu:Cd:Zn:Sb:Sn of 11:6–x p :x p :12:30 with x p = 0, 1, 2, 3, 4, 5, and 6, where x p is the preparative amount of Zn employed in the reaction. The crystal structures and the compositions were established by single-crystal as well as powder X-ray diffraction and wavelength-dispersive X-ray analysis measurements. The title solid-solution Zintl compounds crystallize isostructurally in the centrosymmetric monoclinic space group C 2 /m (No. 12, Z = 2) as the Sr₁₁Cd₆Sb₁₂ structure type (Pearson symbol mC 58). There is a miscibility gap at 3 ≤ x p ≤ 4 where the major product crystallizes in a disordered structure related to the Ca₉Mn₄Bi₉ structure type; otherwise, for all other compositions, the Sr₁₁Cd₆Sb₁₂ structure is the majority phase. Eu₁₁Cd₆Sb₁₂ shows lower lattice thermal conductivity relative to Eu₁₁Zn₆Sb₁₂ consistent with its higher mean atomic weight, and as anticipated, the solid-solution samples of Eu₁₁Cd 6–x Zn x Sb₁₂ have effectively reduced lattice thermal conductivities relative to the end member compounds. Eu₁₁̣̣₀ (1) Cd₄̣̣₅ (2) Zn₁̣̣₅ (2) Sb₁₂̣̣₀ (1) exhibits the highest z T value of >0.5 at around 800 K which is twice as large as the end member compounds.

Kazem, Nasrin↗

Synthesis Structure and Characterization of the n=4 Aurivillius Phase Bi5Ti3CrO15

The n=4 Aurivillius phase, Bi{sub 5}Ti{sub 3}CrO{sub 15}, was synthesized by solid state reaction. Rietveld analysis of high resolution neutron diffraction data demonstrated this material to adopt the polar space group A2{sub 1}am at room temperature, transforming to the aristotype I4/mmm structure above 650 C. This phase transition is coincident with an anomaly in DSC signal and relative permittivity, which are characteristic of a ferroelectric-paraelectric phase transition. Bi{sub 5}Ti{sub 3}CrO{sub 15} exhibits paramagnetic behavior at low temperature, with short range antiferromagnetic interactions, but no evidence for long range magnetic ordering. This is considered a consequence of significant disorder of Ti and Cr over the available octahedral sites, as demonstrated by analysis of neutron diffraction data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lattice vacancy migration barriers in Fe-Ni alloys, and an indication as to why Ni atoms diffuse slowly: A first-principles study

Lattice vacancy migration barriers in ferromagnetic Fe 𝑥 ⁢Ni 1−𝑥 alloys (0.4 ≤ 𝑥 ≤ 0.6) are accurately quantified within the framework of ab initio electronic structure calculations using the nudged elastic band (NEB) method. Both the atomically disordered (A1) fcc phase, as well as the atomically ordered, tetragonal L⁢1 0 phase—which is under consideration as a material for a rare-earth-free gap magnet for advanced engineering applications—are investigated. Across an ensemble of NEB calculations performed on supercell configurations spanning a range of compositions and containing disordered, partially ordered, and fully ordered structures, we find that Ni-vacancy interchanges encounter significantly higher energetic barriers than do Fe-vacancy interchanges. We contend that this aspect is a key factor in determining the differences in mobility between Fe and Ni atoms in this ferromagnetic alloy. Moreover, we are able to interpret these findings in terms of the ferromagnetic alloy's underlying spin-polarized electronic structure. Specifically, we report a coupling between the size of local lattice distortions and the magnitude of the local electronic spin polarization around vacancies. This causes Fe atoms to relax into lattice vacancies, while Ni atoms remain rigidly fixed to their original lattice positions. These results give atomic-scale insight into the longstanding experimental observation that Ni exhibits remarkably slow atomic diffusion in Fe-Ni alloys.

density functional theory↗

Composition dependence of atomic order in strain-relaxed, metastable GeSn alloys

Extended x-ray absorption fine structure (EXAFS) measurements of single-crystal Ge/GeSn radial heterostructure nanowires are used to examine the effects of composition on both short-range order (SRO) and longer-range disorder in GeSn alloys. GeSn has prompted significant interest because it can achieve a direct band gap for sufficient Sn concentrations beyond the equilibrium solid solubility limit in an all-group IV system. Short-range order in this material is particularly interesting as it has been predicted to affect the band gap independent of average composition or strain effects. By independently controlling the Sn composition and GeSn thickness during chemical vapor deposition of misfitting GeSn shells around ultrathin, elastically compliant, Ge core nanowires, the elastic misfit strain in the GeSn is minimized for Sn compositions over the studied range ≈Ge 0.96 Sn 0.04 to Ge 0.88 Sn 0.12 . The degree of SRO was found to decrease with increasing Sn composition. Additionally, damping of the EXAFS signal was observed as the Sn content increased, particularly for increasingly distant atomic shells about the absorbing atom, even for scattering paths not involving Sn atoms. This result is quantified as an increase in the mean-squared relative displacement parameters of the shells. These measurements reveal the accommodation of local strain due to the presence of the highly size-mismatched Sn atoms in the Ge diamond cubic lattice (≈14%), which may have effects on the band structure of the material in addition to the influence of short-range atomic order. Comparison among the nanowire samples allows for calculation of the topological rigidity parameter, a ∗∗ , for the first-neighbor bond lengths. Furthermore, these exhibit chemically distinct values for Ge-Ge, Ge-Sn, and Sn-Sn, and they are consistent with the value a ∗∗ = 0.75 ± 0.07 confirming the general applicability of the model to alloys with both large amounts of natural misfit strain and the potential for short-range order.

Crystal structure Semiconductors Transmission elec↗

Direct observation of the momentum distribution and renormalization factor in lithium

We have measured the momentum distribution and renormalization factor $Z_{k_F}$ in liquid and solid lithium by high-resolution Compton scattering. High-resolution data over a wide momentum range exhibit a clear feature of the renormalization and a sharp drop of momentum densities at the Fermi momentum $k_F$. In this work, these results are compared with those computed by quantum Monte Carlo simulation performed both on a disordered crystal and a liquid exhibiting very good agreement. Asymptotic behavior of the experimental and theoretical momentum distributions are examined to estimate $Z_{k_F}$. The experimentally obtained $Z_{k_F} = 0.43^{+0.11}_{–0.01}$ for liquid Li and $0.54^{+0.11}_{–0.02}$ for solid Li are in good agreement with theoretical results of 0.54 ± 0.01 and 0.64 ± 0.01, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemical Performance of Nanosized Disordered LiVOPO 4

ε-LiVOPO4 is a promising multielectron cathode material for Li-ion batteries that can accommodate two electrons per vanadium, leading to higher energy densities. However, poor electronic conductivity and low lithium ion diffusivity currently result in low rate capability and poor cycle life. To enhance the electrochemical performance of ε-LiVOPO4, in this work, we optimized its solid-state synthesis route using in situ synchrotron X-ray diffraction and applied a combination of high-energy ball-milling with electronically and ionically conductive coatings aiming to improve bulk and surface Li diffusion. We show that high-energy ball-milling, while reducing the particle size also introduces structural disorder, as evidenced by 7Li and 31P NMR and X-ray absorption spectroscopy. We also show that a combination of electronically and ionically conductive coatings helps to utilize close to theoretical capacity for ε-LiVOPO4 at C/50 (1 C = 153 mA h g–1) and to enhance rate performance and capacity retention. The optimized ε-LiVOPO4/Li3VO4/acetylene black composite yields the high cycling capacity of 250 mA h g–1 at C/5 for over 70 cycles.

36 MATERIALS SCIENCE↗